Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...

3 files changed, 19 insertions, 10 deletions

diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 818dce344e8..53d647f8e74 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -75,8 +75,8 @@ BEGIN_FTR_SECTION
 END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
 
 	/* Restore SPRG3 */
-	ld	r3,PACA_SPRG3(r13)
-	mtspr	SPRN_SPRG3,r3
+	ld	r3,PACA_SPRG_VDSO(r13)
+	mtspr	SPRN_SPRG_VDSO_WRITE,r3
 
 	/* Reload the host's PMU registers */
 	ld	r3, PACALPPACAPTR(r13)	/* is the host using the PMU? */
diff --git a/arch/powerpc/kvm/book3s_interrupts.S b/arch/powerpc/kvm/book3s_interrupts.S
index f779450cb07..3533c999194 100644
--- a/arch/powerpc/kvm/book3s_interrupts.S
+++ b/arch/powerpc/kvm/book3s_interrupts.S
@@ -153,8 +153,8 @@ kvm_start_lightweight:
 	 * Reload kernel SPRG3 value.
 	 * No need to save guest value as usermode can't modify SPRG3.
 	 */
-	ld	r3, PACA_SPRG3(r13)
-	mtspr	SPRN_SPRG3, r3
+	ld	r3, PACA_SPRG_VDSO(r13)
+	mtspr	SPRN_SPRG_VDSO_WRITE, r3
 #endif /* CONFIG_PPC_BOOK3S_64 */
 
 	/* R7 = vcpu */
diff --git a/arch/powerpc/kvm/bookehv_interrupts.S b/arch/powerpc/kvm/bookehv_interrupts.S
index e4185f6b330..a1712b818a5 100644
--- a/arch/powerpc/kvm/bookehv_interrupts.S
+++ b/arch/powerpc/kvm/bookehv_interrupts.S
@@ -229,17 +229,20 @@
 	stw	r10, VCPU_CR(r4)
 	PPC_STL r11, VCPU_GPR(R4)(r4)
 	PPC_STL	r5, VCPU_GPR(R5)(r4)
-	.if \type == EX_CRIT
-	PPC_LL	r5, (\paca_ex + EX_R13)(r13)
-	.else
-	mfspr	r5, \scratch
-	.endif
 	PPC_STL	r6, VCPU_GPR(R6)(r4)
 	PPC_STL	r8, VCPU_GPR(R8)(r4)
 	PPC_STL	r9, VCPU_GPR(R9)(r4)
-	PPC_STL r5, VCPU_GPR(R13)(r4)
+	.if \type == EX_TLB
+	PPC_LL	r5, EX_TLB_R13(r12)
+	PPC_LL	r6, EX_TLB_R10(r12)
+	PPC_LL	r8, EX_TLB_R11(r12)
+	mfspr	r12, \scratch
+	.else
+	mfspr	r5, \scratch
 	PPC_LL	r6, (\paca_ex + \ex_r10)(r13)
 	PPC_LL	r8, (\paca_ex + \ex_r11)(r13)
+	.endif
+	PPC_STL r5, VCPU_GPR(R13)(r4)
 	PPC_STL r3, VCPU_GPR(R3)(r4)
 	PPC_STL r7, VCPU_GPR(R7)(r4)
 	PPC_STL r12, VCPU_GPR(R12)(r4)
@@ -435,10 +438,16 @@ _GLOBAL(kvmppc_resume_host)
 	PPC_STL	r5, VCPU_LR(r4)
 	mfspr	r7, SPRN_SPRG5
 	stw	r3, VCPU_VRSAVE(r4)
+#ifdef CONFIG_64BIT
+	PPC_LL	r3, PACA_SPRG_VDSO(r13)
+#endif
 	PPC_STD(r6, VCPU_SHARED_SPRG4, r11)
 	mfspr	r8, SPRN_SPRG6
 	PPC_STD(r7, VCPU_SHARED_SPRG5, r11)
 	mfspr	r9, SPRN_SPRG7
+#ifdef CONFIG_64BIT
+	mtspr	SPRN_SPRG_VDSO_WRITE, r3
+#endif
 	PPC_STD(r8, VCPU_SHARED_SPRG6, r11)
 	mfxer	r3
 	PPC_STD(r9, VCPU_SHARED_SPRG7, r11)