[PATCH] powerpc: G4+ oprofile support

This patch adds oprofile support for the 7450 and all its multitudinous
derivatives.

* Added 7450 (and derivatives) support for oprofile
* Changed e500 cputable to have oprofile model and cpu_type fields
* Added support for classic 32-bit performance monitor interrupt
* Cleaned up common powerpc oprofile code to be as common as possible
* Cleaned up oprofile_impl.h to reflect 32 bit classic code
* Added 32-bit MMCRx bitfield definitions and SPR numbers

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 12 insertions, 49 deletions

diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index af2c05d20ba..a370778b68d 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -14,9 +14,6 @@
  */
 
 #include <linux/oprofile.h>
-#ifndef __powerpc64__
-#include <linux/slab.h>
-#endif /* ! __powerpc64__ */
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/errno.h>
@@ -31,10 +28,6 @@ static struct op_powerpc_model *model;
 static struct op_counter_config ctr[OP_MAX_COUNTER];
 static struct op_system_config sys;
 
-#ifndef __powerpc64__
-static char *cpu_type;
-#endif /* ! __powerpc64__ */
-
 static void op_handle_interrupt(struct pt_regs *regs)
 {
 	model->handle_interrupt(regs, ctr);
@@ -53,14 +46,7 @@ static int op_powerpc_setup(void)
 	model->reg_setup(ctr, &sys, model->num_counters);
 
 	/* Configure the registers on all cpus.  */
-#ifdef __powerpc64__
 	on_each_cpu(model->cpu_setup, NULL, 0, 1);
-#else /* __powerpc64__ */
-#if 0
-	/* FIXME: Make multi-cpu work */
-	on_each_cpu(model->reg_setup, NULL, 0, 1);
-#endif
-#endif /* __powerpc64__ */
 
 	return 0;
 }
@@ -95,7 +81,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 {
 	int i;
 
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
 	/*
 	 * There is one mmcr0, mmcr1 and mmcra for setting the events for
 	 * all of the counters.
@@ -103,7 +89,7 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 	oprofilefs_create_ulong(sb, root, "mmcr0", &sys.mmcr0);
 	oprofilefs_create_ulong(sb, root, "mmcr1", &sys.mmcr1);
 	oprofilefs_create_ulong(sb, root, "mmcra", &sys.mmcra);
-#endif /* __powerpc64__ */
+#endif
 
 	for (i = 0; i < model->num_counters; ++i) {
 		struct dentry *dir;
@@ -115,65 +101,46 @@ static int op_powerpc_create_files(struct super_block *sb, struct dentry *root)
 		oprofilefs_create_ulong(sb, dir, "enabled", &ctr[i].enabled);
 		oprofilefs_create_ulong(sb, dir, "event", &ctr[i].event);
 		oprofilefs_create_ulong(sb, dir, "count", &ctr[i].count);
-#ifdef __powerpc64__
+
 		/*
-		 * We dont support per counter user/kernel selection, but
-		 * we leave the entries because userspace expects them
+		 * Classic PowerPC doesn't support per-counter
+		 * control like this, but the options are
+		 * expected, so they remain.  For Freescale
+		 * Book-E style performance monitors, we do
+		 * support them.
 		 */
-#endif /* __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "kernel", &ctr[i].kernel);
 		oprofilefs_create_ulong(sb, dir, "user", &ctr[i].user);
 
-#ifndef __powerpc64__
-		/* FIXME: Not sure if this is used */
-#endif /* ! __powerpc64__ */
 		oprofilefs_create_ulong(sb, dir, "unit_mask", &ctr[i].unit_mask);
 	}
 
 	oprofilefs_create_ulong(sb, root, "enable_kernel", &sys.enable_kernel);
 	oprofilefs_create_ulong(sb, root, "enable_user", &sys.enable_user);
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
 	oprofilefs_create_ulong(sb, root, "backtrace_spinlocks",
 				&sys.backtrace_spinlocks);
-#endif /* __powerpc64__ */
+#endif
 
 	/* Default to tracing both kernel and user */
 	sys.enable_kernel = 1;
 	sys.enable_user = 1;
-#ifdef __powerpc64__
+#ifdef CONFIG_PPC64
 	/* Turn on backtracing through spinlocks by default */
 	sys.backtrace_spinlocks = 1;
-#endif /* __powerpc64__ */
+#endif
 
 	return 0;
 }
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
 {
-#ifndef __powerpc64__
-#ifdef CONFIG_FSL_BOOKE
-	model = &op_model_fsl_booke;
-#else
-	return -ENODEV;
-#endif
-
-	cpu_type = kmalloc(32, GFP_KERNEL);
-	if (NULL == cpu_type)
-		return -ENOMEM;
-
-	sprintf(cpu_type, "ppc/%s", cur_cpu_spec->cpu_name);
-
-	model->num_counters = cur_cpu_spec->num_pmcs;
-
-	ops->cpu_type = cpu_type;
-#else /* __powerpc64__ */
 	if (!cur_cpu_spec->oprofile_model || !cur_cpu_spec->oprofile_cpu_type)
 		return -ENODEV;
 	model = cur_cpu_spec->oprofile_model;
 	model->num_counters = cur_cpu_spec->num_pmcs;
 
 	ops->cpu_type = cur_cpu_spec->oprofile_cpu_type;
-#endif /* __powerpc64__ */
 	ops->create_files = op_powerpc_create_files;
 	ops->setup = op_powerpc_setup;
 	ops->shutdown = op_powerpc_shutdown;
@@ -188,8 +155,4 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 void oprofile_arch_exit(void)
 {
-#ifndef __powerpc64__
-	kfree(cpu_type);
-	cpu_type = NULL;
-#endif /* ! __powerpc64__ */
 }