Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc updates from Benjamin Herrenschmidt:
 "Some highlights in addition to the usual batch of fixes:

   - 64TB address space support for 64-bit processes by Aneesh Kumar

   - Gavin Shan did a major cleanup & re-organization of our EEH support
     code (IBM fancy PCI error handling & recovery infrastructure) which
     paves the way for supporting different platform backends, along
     with some rework of the PCIe code for the PowerNV platform in order
     to remove home made resource allocations and instead use the
     generic code (which is possible after some small improvements to it
     done by Gavin).

   - Uprobes support by Ananth N Mavinakayanahalli

   - A pile of embedded updates from Freescale folks, including new SoC
     and board supports, more KVM stuff including preparing for 64-bit
     BookE KVM support, ePAPR 1.1 updates, etc..."

Fixup trivial conflicts in drivers/scsi/ipr.c

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits)
  powerpc/iommu: Fix multiple issues with IOMMU pools code
  powerpc: Fix VMX fix for memcpy case
  driver/mtd:IFC NAND:Initialise internal SRAM before any write
  powerpc/fsl-pci: use 'Header Type' to identify PCIE mode
  powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get
  powerpc: Remove tlb batching hack for nighthawk
  powerpc: Set paca->data_offset = 0 for boot cpu
  powerpc/perf: Sample only if SIAR-Valid bit is set in P7+
  powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled
  powerpc/mpc85xx: Update interrupt handling for IFC controller
  powerpc/85xx: Enable USB support in p1023rds_defconfig
  powerpc/smp: Do not disable IPI interrupts during suspend
  powerpc/eeh: Fix crash on converting OF node to edev
  powerpc/eeh: Lock module while handling EEH event
  powerpc/kprobe: Don't emulate store when kprobe stwu r1
  powerpc/kprobe: Complete kprobe and migrate exception frame
  powerpc/kprobe: Introduce a new thread flag
  powerpc: Remove unused __get_user64() and __put_user64()
  powerpc/eeh: Global mutex to protect PE tree
  powerpc/eeh: Remove EEH PE for normal PCI hotplug
  ...

1 files changed, 97 insertions, 60 deletions

diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index c37f4613632..ffb93ae9379 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -38,15 +38,15 @@ static int fsl_pcie_bus_fixup, is_mpc83xx_pci;
 
 static void __devinit quirk_fsl_pcie_header(struct pci_dev *dev)
 {
-	u8 progif;
+	u8 hdr_type;
 
 	/* if we aren't a PCIe don't bother */
 	if (!pci_find_capability(dev, PCI_CAP_ID_EXP))
 		return;
 
 	/* if we aren't in host mode don't bother */
-	pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
-	if (progif & 0x1)
+	pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type);
+	if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
 		return;
 
 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
@@ -143,18 +143,20 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 	pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n",
 		 (u64)rsrc->start, (u64)resource_size(rsrc));
 
-	if (of_device_is_compatible(hose->dn, "fsl,qoriq-pcie-v2.2")) {
-		win_idx = 2;
-		start_idx = 0;
-		end_idx = 3;
-	}
-
 	pci = ioremap(rsrc->start, resource_size(rsrc));
 	if (!pci) {
 	    dev_err(hose->parent, "Unable to map ATMU registers\n");
 	    return;
 	}
 
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) {
+			win_idx = 2;
+			start_idx = 0;
+			end_idx = 3;
+		}
+	}
+
 	/* Disable all windows (except powar0 since it's ignored) */
 	for(i = 1; i < 5; i++)
 		out_be32(&pci->pow[i].powar, 0);
@@ -425,7 +427,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	struct pci_controller *hose;
 	struct resource rsrc;
 	const int *bus_range;
-	u8 progif;
+	u8 hdr_type, progif;
 
 	if (!of_device_is_available(dev)) {
 		pr_warning("%s: disabled\n", dev->full_name);
@@ -457,15 +459,17 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4,
 		PPC_INDIRECT_TYPE_BIG_ENDIAN);
 
-	early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
-	if ((progif & 1) == 1) {
-		/* unmap cfg_data & cfg_addr separately if not on same page */
-		if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
-		    ((unsigned long)hose->cfg_addr & PAGE_MASK))
-			iounmap(hose->cfg_data);
-		iounmap(hose->cfg_addr);
-		pcibios_free_controller(hose);
-		return -ENODEV;
+	if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) {
+		/* For PCIE read HEADER_TYPE to identify controler mode */
+		early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type);
+		if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE)
+			goto no_bridge;
+
+	} else {
+		/* For PCI read PROG to identify controller mode */
+		early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif);
+		if ((progif & 1) == 1)
+			goto no_bridge;
 	}
 
 	setup_pci_cmd(hose);
@@ -494,6 +498,15 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	setup_pci_atmu(hose, &rsrc);
 
 	return 0;
+
+no_bridge:
+	/* unmap cfg_data & cfg_addr separately if not on same page */
+	if (((unsigned long)hose->cfg_data & PAGE_MASK) !=
+	    ((unsigned long)hose->cfg_addr & PAGE_MASK))
+		iounmap(hose->cfg_data);
+	iounmap(hose->cfg_addr);
+	pcibios_free_controller(hose);
+	return -ENODEV;
 }
 #endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */
 
@@ -818,6 +831,7 @@ static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,p1010-pcie", },
 	{ .compatible = "fsl,p1023-pcie", },
 	{ .compatible = "fsl,p4080-pcie", },
+	{ .compatible = "fsl,qoriq-pcie-v2.4", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{},
@@ -825,57 +839,80 @@ static const struct of_device_id pci_ids[] = {
 
 struct device_node *fsl_pci_primary;
 
-void __devinit fsl_pci_init(void)
+void fsl_pci_assign_primary(void)
 {
-	int ret;
-	struct device_node *node;
-	struct pci_controller *hose;
-	dma_addr_t max = 0xffffffff;
+	struct device_node *np;
 
 	/* Callers can specify the primary bus using other means. */
-	if (!fsl_pci_primary) {
-		/* If a PCI host bridge contains an ISA node, it's primary. */
-		node = of_find_node_by_type(NULL, "isa");
-		while ((fsl_pci_primary = of_get_parent(node))) {
-			of_node_put(node);
-			node = fsl_pci_primary;
-
-			if (of_match_node(pci_ids, node))
-				break;
-		}
+	if (fsl_pci_primary)
+		return;
+
+	/* If a PCI host bridge contains an ISA node, it's primary. */
+	np = of_find_node_by_type(NULL, "isa");
+	while ((fsl_pci_primary = of_get_parent(np))) {
+		of_node_put(np);
+		np = fsl_pci_primary;
+
+		if (of_match_node(pci_ids, np) && of_device_is_available(np))
+			return;
 	}
 
-	node = NULL;
-	for_each_node_by_type(node, "pci") {
-		if (of_match_node(pci_ids, node)) {
-			/*
-			 * If there's no PCI host bridge with ISA, arbitrarily
-			 * designate one as primary.  This can go away once
-			 * various bugs with primary-less systems are fixed.
-			 */
-			if (!fsl_pci_primary)
-				fsl_pci_primary = node;
-
-			ret = fsl_add_bridge(node, fsl_pci_primary == node);
-			if (ret == 0) {
-				hose = pci_find_hose_for_OF_device(node);
-				max = min(max, hose->dma_window_base_cur +
-						hose->dma_window_size);
-			}
+	/*
+	 * If there's no PCI host bridge with ISA, arbitrarily
+	 * designate one as primary.  This can go away once
+	 * various bugs with primary-less systems are fixed.
+	 */
+	for_each_matching_node(np, pci_ids) {
+		if (of_device_is_available(np)) {
+			fsl_pci_primary = np;
+			of_node_put(np);
+			return;
 		}
 	}
+}
 
+static int __devinit fsl_pci_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct device_node *node;
 #ifdef CONFIG_SWIOTLB
-	/*
-	 * if we couldn't map all of DRAM via the dma windows
-	 * we need SWIOTLB to handle buffers located outside of
-	 * dma capable memory region
-	 */
-	if (memblock_end_of_DRAM() - 1 > max) {
-		ppc_swiotlb_enable = 1;
-		set_pci_dma_ops(&swiotlb_dma_ops);
-		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
+	struct pci_controller *hose;
+#endif
+
+	node = pdev->dev.of_node;
+	ret = fsl_add_bridge(node, fsl_pci_primary == node);
+
+#ifdef CONFIG_SWIOTLB
+	if (ret == 0) {
+		hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+
+		/*
+		 * if we couldn't map all of DRAM via the dma windows
+		 * we need SWIOTLB to handle buffers located outside of
+		 * dma capable memory region
+		 */
+		if (memblock_end_of_DRAM() - 1 > hose->dma_window_base_cur +
+				hose->dma_window_size)
+			ppc_swiotlb_enable = 1;
 	}
 #endif
+
+	mpc85xx_pci_err_probe(pdev);
+
+	return 0;
+}
+
+static struct platform_driver fsl_pci_driver = {
+	.driver = {
+		.name = "fsl-pci",
+		.of_match_table = pci_ids,
+	},
+	.probe = fsl_pci_probe,
+};
+
+static int __init fsl_pci_init(void)
+{
+	return platform_driver_register(&fsl_pci_driver);
 }
+arch_initcall(fsl_pci_init);
 #endif