Merge tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

Pull powerpc updates from Michael Ellerman:
 "Some nice cleanups like removing bootmem, and removal of
  __get_cpu_var().

  There is one patch to mm/gup.c.  This is the generic GUP
  implementation, but is only used by us and arm(64).  We have an ack
  from Steve Capper, and although we didn't get an ack from Andrew he
  told us to take the patch through the powerpc tree.

  There's one cxl patch.  This is in drivers/misc, but Greg said he was
  happy for us to manage fixes for it.

  There is an infrastructure patch to support an IPMI driver for OPAL.

  There is also an RTC driver for OPAL.  We weren't able to get any
  response from the RTC maintainer, Alessandro Zummo, so in the end we
  just merged the driver.

  The usual batch of Freescale updates from Scott"

* tag 'powerpc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (101 commits)
  powerpc/powernv: Return to cpu offline loop when finished in KVM guest
  powerpc/book3s: Fix partial invalidation of TLBs in MCE code.
  powerpc/mm: don't do tlbie for updatepp request with NO HPTE fault
  powerpc/xmon: Cleanup the breakpoint flags
  powerpc/xmon: Enable HW instruction breakpoint on POWER8
  powerpc/mm/thp: Use tlbiel if possible
  powerpc/mm/thp: Remove code duplication
  powerpc/mm/hugetlb: Sanity check gigantic hugepage count
  powerpc/oprofile: Disable pagefaults during user stack read
  powerpc/mm: Check for matching hpte without taking hpte lock
  powerpc: Drop useless warning in eeh_init()
  powerpc/powernv: Cleanup unused MCE definitions/declarations.
  powerpc/eeh: Dump PHB diag-data early
  powerpc/eeh: Recover EEH error on ownership change for BCM5719
  powerpc/eeh: Set EEH_PE_RESET on PE reset
  powerpc/eeh: Refactor eeh_reset_pe()
  powerpc: Remove more traces of bootmem
  powerpc/pseries: Initialise nvram_pstore_info's buf_lock
  cxl: Name interrupts in /proc/interrupt
  cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
  ...

1 files changed, 63 insertions, 19 deletions

diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index c8efbb37d6e..5b150f0c5df 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -51,6 +51,12 @@
 #include <asm/paca.h>
 #endif
 
+#if defined(CONFIG_PPC_SPLPAR)
+#include <asm/plpar_wrappers.h>
+#else
+static inline long plapr_set_ciabr(unsigned long ciabr) {return 0; };
+#endif
+
 #include "nonstdio.h"
 #include "dis-asm.h"
 
@@ -88,10 +94,9 @@ struct bpt {
 };
 
 /* Bits in bpt.enabled */
-#define BP_IABR_TE	1		/* IABR translation enabled */
-#define BP_IABR		2
-#define BP_TRAP		8
-#define BP_DABR		0x10
+#define BP_CIABR	1
+#define BP_TRAP		2
+#define BP_DABR		4
 
 #define NBPTS	256
 static struct bpt bpts[NBPTS];
@@ -270,6 +275,45 @@ static inline void cinval(void *p)
 	asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
 }
 
+/**
+ * write_ciabr() - write the CIABR SPR
+ * @ciabr:	The value to write.
+ *
+ * This function writes a value to the CIARB register either directly
+ * through mtspr instruction if the kernel is in HV privilege mode or
+ * call a hypervisor function to achieve the same in case the kernel
+ * is in supervisor privilege mode.
+ */
+static void write_ciabr(unsigned long ciabr)
+{
+	if (!cpu_has_feature(CPU_FTR_ARCH_207S))
+		return;
+
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		mtspr(SPRN_CIABR, ciabr);
+		return;
+	}
+	plapr_set_ciabr(ciabr);
+}
+
+/**
+ * set_ciabr() - set the CIABR
+ * @addr:	The value to set.
+ *
+ * This function sets the correct privilege value into the the HW
+ * breakpoint address before writing it up in the CIABR register.
+ */
+static void set_ciabr(unsigned long addr)
+{
+	addr &= ~CIABR_PRIV;
+
+	if (cpu_has_feature(CPU_FTR_HVMODE))
+		addr |= CIABR_PRIV_HYPER;
+	else
+		addr |= CIABR_PRIV_SUPER;
+	write_ciabr(addr);
+}
+
 /*
  * Disable surveillance (the service processor watchdog function)
  * while we are in xmon.
@@ -727,7 +771,7 @@ static void insert_bpts(void)
 
 	bp = bpts;
 	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if ((bp->enabled & (BP_TRAP|BP_IABR)) == 0)
+		if ((bp->enabled & (BP_TRAP|BP_CIABR)) == 0)
 			continue;
 		if (mread(bp->address, &bp->instr[0], 4) != 4) {
 			printf("Couldn't read instruction at %lx, "
@@ -742,7 +786,7 @@ static void insert_bpts(void)
 			continue;
 		}
 		store_inst(&bp->instr[0]);
-		if (bp->enabled & BP_IABR)
+		if (bp->enabled & BP_CIABR)
 			continue;
 		if (mwrite(bp->address, &bpinstr, 4) != 4) {
 			printf("Couldn't write instruction at %lx, "
@@ -764,9 +808,9 @@ static void insert_cpu_bpts(void)
 		brk.len = 8;
 		__set_breakpoint(&brk);
 	}
-	if (iabr && cpu_has_feature(CPU_FTR_IABR))
-		mtspr(SPRN_IABR, iabr->address
-			 | (iabr->enabled & (BP_IABR|BP_IABR_TE)));
+
+	if (iabr)
+		set_ciabr(iabr->address);
 }
 
 static void remove_bpts(void)
@@ -777,7 +821,7 @@ static void remove_bpts(void)
 
 	bp = bpts;
 	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if ((bp->enabled & (BP_TRAP|BP_IABR)) != BP_TRAP)
+		if ((bp->enabled & (BP_TRAP|BP_CIABR)) != BP_TRAP)
 			continue;
 		if (mread(bp->address, &instr, 4) == 4
 		    && instr == bpinstr
@@ -792,8 +836,7 @@ static void remove_bpts(void)
 static void remove_cpu_bpts(void)
 {
 	hw_breakpoint_disable();
-	if (cpu_has_feature(CPU_FTR_IABR))
-		mtspr(SPRN_IABR, 0);
+	write_ciabr(0);
 }
 
 /* Command interpreting routine */
@@ -907,7 +950,7 @@ cmds(struct pt_regs *excp)
 		case 'u':
 			dump_segments();
 			break;
-#elif defined(CONFIG_4xx)
+#elif defined(CONFIG_44x)
 		case 'u':
 			dump_tlb_44x();
 			break;
@@ -981,7 +1024,8 @@ static void bootcmds(void)
 	else if (cmd == 'h')
 		ppc_md.halt();
 	else if (cmd == 'p')
-		ppc_md.power_off();
+		if (pm_power_off)
+			pm_power_off();
 }
 
 static int cpu_cmd(void)
@@ -1127,7 +1171,7 @@ static char *breakpoint_help_string =
     "b <addr> [cnt]   set breakpoint at given instr addr\n"
     "bc               clear all breakpoints\n"
     "bc <n/addr>      clear breakpoint number n or at addr\n"
-    "bi <addr> [cnt]  set hardware instr breakpoint (POWER3/RS64 only)\n"
+    "bi <addr> [cnt]  set hardware instr breakpoint (POWER8 only)\n"
     "bd <addr> [cnt]  set hardware data breakpoint\n"
     "";
 
@@ -1166,13 +1210,13 @@ bpt_cmds(void)
 		break;
 
 	case 'i':	/* bi - hardware instr breakpoint */
-		if (!cpu_has_feature(CPU_FTR_IABR)) {
+		if (!cpu_has_feature(CPU_FTR_ARCH_207S)) {
 			printf("Hardware instruction breakpoint "
 			       "not supported on this cpu\n");
 			break;
 		}
 		if (iabr) {
-			iabr->enabled &= ~(BP_IABR | BP_IABR_TE);
+			iabr->enabled &= ~BP_CIABR;
 			iabr = NULL;
 		}
 		if (!scanhex(&a))
@@ -1181,7 +1225,7 @@ bpt_cmds(void)
 			break;
 		bp = new_breakpoint(a);
 		if (bp != NULL) {
-			bp->enabled |= BP_IABR | BP_IABR_TE;
+			bp->enabled |= BP_CIABR;
 			iabr = bp;
 		}
 		break;
@@ -1238,7 +1282,7 @@ bpt_cmds(void)
 				if (!bp->enabled)
 					continue;
 				printf("%2x %s   ", BP_NUM(bp),
-				    (bp->enabled & BP_IABR)? "inst": "trap");
+				    (bp->enabled & BP_CIABR) ? "inst": "trap");
 				xmon_print_symbol(bp->address, "  ", "\n");
 			}
 			break;