sparc32: drop sun4c support

Machines with sun4c support are very rare these days, and noone
is using them for any practical purposes.
The sun4c support has been know broken for quite some time too.

So rather than trying to keep it up-to-date, lets get rid of it.
This allows us to do some very welcome cleanup of sparc32 support.

Updated the former sun4c specifc nmi (which was also used
for sun4m UP) to be a generic UP NMI.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 0 insertions, 269 deletions

diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
deleted file mode 100644
index 39c64211b1b..00000000000
--- a/arch/sparc/kernel/sun4c_irq.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * sun4c irq support
- *
- *  djhr: Hacked out of irq.c into a CPU dependent version.
- *
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *  Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
- *  Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
- *  Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
- */
-
-#include <linux/init.h>
-
-#include <asm/oplib.h>
-#include <asm/timer.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-
-#include "irq.h"
-
-/* Sun4c interrupts are typically laid out as follows:
- *
- *  1 - Software interrupt, SBUS level 1
- *  2 - SBUS level 2
- *  3 - ESP SCSI, SBUS level 3
- *  4 - Software interrupt
- *  5 - Lance ethernet, SBUS level 4
- *  6 - Software interrupt
- *  7 - Graphics card, SBUS level 5
- *  8 - SBUS level 6
- *  9 - SBUS level 7
- * 10 - Counter timer
- * 11 - Floppy
- * 12 - Zilog uart
- * 13 - CS4231 audio
- * 14 - Profiling timer
- * 15 - NMI
- *
- * The interrupt enable bits in the interrupt mask register are
- * really only used to enable/disable the timer interrupts, and
- * for signalling software interrupts.  There is also a master
- * interrupt enable bit in this register.
- *
- * Interrupts are enabled by setting the SUN4C_INT_* bits, they
- * are disabled by clearing those bits.
- */
-
-/*
- * Bit field defines for the interrupt registers on various
- * Sparc machines.
- */
-
-/* The sun4c interrupt register. */
-#define SUN4C_INT_ENABLE  0x01     /* Allow interrupts. */
-#define SUN4C_INT_E14     0x80     /* Enable level 14 IRQ. */
-#define SUN4C_INT_E10     0x20     /* Enable level 10 IRQ. */
-#define SUN4C_INT_E8      0x10     /* Enable level 8 IRQ. */
-#define SUN4C_INT_E6      0x08     /* Enable level 6 IRQ. */
-#define SUN4C_INT_E4      0x04     /* Enable level 4 IRQ. */
-#define SUN4C_INT_E1      0x02     /* Enable level 1 IRQ. */
-
-/*
- * Pointer to the interrupt enable byte
- * Used by entry.S
- */
-unsigned char __iomem *interrupt_enable;
-
-static void sun4c_mask_irq(struct irq_data *data)
-{
-	unsigned long mask = (unsigned long)data->chip_data;
-
-	if (mask) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		mask = sbus_readb(interrupt_enable) & ~mask;
-		sbus_writeb(mask, interrupt_enable);
-		local_irq_restore(flags);
-	}
-}
-
-static void sun4c_unmask_irq(struct irq_data *data)
-{
-	unsigned long mask = (unsigned long)data->chip_data;
-
-	if (mask) {
-		unsigned long flags;
-
-		local_irq_save(flags);
-		mask = sbus_readb(interrupt_enable) | mask;
-		sbus_writeb(mask, interrupt_enable);
-		local_irq_restore(flags);
-	}
-}
-
-static unsigned int sun4c_startup_irq(struct irq_data *data)
-{
-	irq_link(data->irq);
-	sun4c_unmask_irq(data);
-
-	return 0;
-}
-
-static void sun4c_shutdown_irq(struct irq_data *data)
-{
-	sun4c_mask_irq(data);
-	irq_unlink(data->irq);
-}
-
-static struct irq_chip sun4c_irq = {
-	.name		= "sun4c",
-	.irq_startup	= sun4c_startup_irq,
-	.irq_shutdown	= sun4c_shutdown_irq,
-	.irq_mask	= sun4c_mask_irq,
-	.irq_unmask	= sun4c_unmask_irq,
-};
-
-static unsigned int sun4c_build_device_irq(struct platform_device *op,
-					   unsigned int real_irq)
-{
-	 unsigned int irq;
-
-	if (real_irq >= 16) {
-		prom_printf("Bogus sun4c IRQ %u\n", real_irq);
-		prom_halt();
-	}
-
-	irq = irq_alloc(real_irq, real_irq);
-	if (irq) {
-		unsigned long mask = 0UL;
-
-		switch (real_irq) {
-		case 1:
-			mask = SUN4C_INT_E1;
-			break;
-		case 8:
-			mask = SUN4C_INT_E8;
-			break;
-		case 10:
-			mask = SUN4C_INT_E10;
-			break;
-		case 14:
-			mask = SUN4C_INT_E14;
-			break;
-		default:
-			/* All the rest are either always enabled,
-			 * or are for signalling software interrupts.
-			 */
-			break;
-		}
-		irq_set_chip_and_handler_name(irq, &sun4c_irq,
-		                              handle_level_irq, "level");
-		irq_set_chip_data(irq, (void *)mask);
-	}
-	return irq;
-}
-
-struct sun4c_timer_info {
-	u32		l10_count;
-	u32		l10_limit;
-	u32		l14_count;
-	u32		l14_limit;
-};
-
-static struct sun4c_timer_info __iomem *sun4c_timers;
-
-static void sun4c_clear_clock_irq(void)
-{
-	sbus_readl(&sun4c_timers->l10_limit);
-}
-
-static void sun4c_load_profile_irq(int cpu, unsigned int limit)
-{
-	/* Errm.. not sure how to do this.. */
-}
-
-static void __init sun4c_init_timers(void)
-{
-	const struct linux_prom_irqs *prom_irqs;
-	struct device_node *dp;
-	unsigned int irq;
-	const u32 *addr;
-	int err;
-
-	dp = of_find_node_by_name(NULL, "counter-timer");
-	if (!dp) {
-		prom_printf("sun4c_init_timers: Unable to find counter-timer\n");
-		prom_halt();
-	}
-
-	addr = of_get_property(dp, "address", NULL);
-	if (!addr) {
-		prom_printf("sun4c_init_timers: No address property\n");
-		prom_halt();
-	}
-
-	sun4c_timers = (void __iomem *) (unsigned long) addr[0];
-
-	prom_irqs = of_get_property(dp, "intr", NULL);
-	of_node_put(dp);
-	if (!prom_irqs) {
-		prom_printf("sun4c_init_timers: No intr property\n");
-		prom_halt();
-	}
-
-	/* Have the level 10 timer tick at 100HZ.  We don't touch the
-	 * level 14 timer limit since we are letting the prom handle
-	 * them until we have a real console driver so L1-A works.
-	 */
-	sparc_config.cs_period = SBUS_CLOCK_RATE / HZ;
-	sparc_config.features |=
-	    FEAT_L10_CLOCKSOURCE | FEAT_L10_CLOCKEVENT;
-	sbus_writel(timer_value(sparc_config.cs_period),
-	            &sun4c_timers->l10_limit);
-
-	master_l10_counter = &sun4c_timers->l10_count;
-
-	irq = sun4c_build_device_irq(NULL, prom_irqs[0].pri);
-	err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL);
-	if (err) {
-		prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err);
-		prom_halt();
-	}
-
-	/* disable timer interrupt */
-	sun4c_mask_irq(irq_get_irq_data(irq));
-}
-
-#ifdef CONFIG_SMP
-static void sun4c_nop(void)
-{
-}
-#endif
-
-void __init sun4c_init_IRQ(void)
-{
-	struct device_node *dp;
-	const u32 *addr;
-
-	dp = of_find_node_by_name(NULL, "interrupt-enable");
-	if (!dp) {
-		prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n");
-		prom_halt();
-	}
-
-	addr = of_get_property(dp, "address", NULL);
-	of_node_put(dp);
-	if (!addr) {
-		prom_printf("sun4c_init_IRQ: No address property\n");
-		prom_halt();
-	}
-
-	interrupt_enable = (void __iomem *) (unsigned long) addr[0];
-
-	BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM);
-	BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP);
-
-	sparc_config.init_timers      = sun4c_init_timers;
-	sparc_config.build_device_irq = sun4c_build_device_irq;
-	sparc_config.clock_rate       = SBUS_CLOCK_RATE;
-
-#ifdef CONFIG_SMP
-	BTFIXUPSET_CALL(set_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
-	BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP);
-	BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP);
-#endif
-	sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable);
-	/* Cannot enable interrupts until OBP ticker is disabled. */
-}