[SPARC64]: Fix boot failures on SunBlade-150

The sequence to move over to the Linux trap tables from
the firmware ones needs to be more air tight.  It turns
out that to be %100 safe we do need to be able to translate
OBP mappings in our TLB miss handlers early.

In order not to eat up a lot of kernel image memory with
static page tables, just use the translations array in
the OBP TLB miss handlers.  That solves the bulk of the
problem.

Furthermore, to make sure the OBP TLB miss path will work
even before the fixed MMU globals are loaded, explicitly
load %g1 to TLB_SFSR at the beginning of the i-TLB and
d-TLB miss handlers.

To ease the OBP TLB miss walking of the prom_trans[] array,
we sort it then delete all of the non-OBP entries in there
(for example, there are entries for the kernel image itself
which we're not interested in at all).

We also save about 32K of kernel image size with this change.
Not a bad side effect :-)

There are still some reasons why trampoline.S can't use the
setup_trap_table() yet.  The most noteworthy are:

1) OBP boots secondary processors with non-bias'd stack for
   some reason.  This is easily fixed by using a small bootup
   stack in the kernel image explicitly for this purpose.

2) Doing a firmware call via the normal C call prom_set_trap_table()
   goes through the whole OBP enter/exit sequence that saves and
   restores OBP and Linux kernel state in the MMUs.  This path
   unfortunately does a "flush %g6" while loading up the OBP locked
   TLB entries for the firmware call.

   If we setup the %g6 in the trampoline.S code properly, that
   is in the PAGE_OFFSET linear mapping, but we're not on the
   kernel trap table yet so those addresses won't translate properly.

   One idea is to do a by-hand firmware call like we do in the
   early bootup code and elsewhere here in trampoline.S  But this
   fails as well, as aparently the secondary processors are not
   booted with OBP's special locked TLB entries loaded.  These
   are necessary for the firwmare to processes TLB misses correctly
   up until the point where we take over the trap table.

This does need to be resolved at some point.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 11 insertions, 15 deletions

diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S
index b5e32dfa4fb..4951ff8f687 100644
--- a/arch/sparc64/kernel/itlb_base.S
+++ b/arch/sparc64/kernel/itlb_base.S
@@ -15,14 +15,12 @@
  */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP		nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
 #else /* PAGE_SHIFT */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif /* PAGE_SHIFT */
 
 
@@ -36,6 +34,7 @@
  */
 
 /* ITLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_IMMU, %g4	! Get TAG_ACCESS
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
 	CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
@@ -43,41 +42,38 @@
 1:	brgez,pn	%g5, 3f				! Not valid, branch out
 	 sethi		%hi(_PAGE_EXEC), %g4		! Delay-slot
 	andcc		%g5, %g4, %g0			! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults			*/
 	be,pn		%xcc, 3f			! Nope, branch.
 	 nop						! Delay-slot
 2:	stxa		%g5, [%g0] ASI_ITLB_DATA_IN	! Load PTE into TLB
 	retry						! Trap return
-3:	rdpr		%pstate, %g4			! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults			*/
+3:	rdpr		%pstate, %g4			! Move into alt-globals
 	wrpr		%g4, PSTATE_AG|PSTATE_MG, %pstate
 	rdpr		%tpc, %g5			! And load faulting VA
 	mov		FAULT_CODE_ITLB, %g4		! It was read from ITLB
-sparc64_realfault_common:				! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults	*/
+sparc64_realfault_common:				! Called by dtlb_miss
 	stb		%g4, [%g6 + TI_FAULT_CODE]
 	stx		%g5, [%g6 + TI_FAULT_ADDR]
 	ba,pt		%xcc, etrap			! Save state
 1:	 rd		%pc, %g7			! ...
-	nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups	*/
 	call		do_sparc64_fault		! Call fault handler
 	 add		%sp, PTREGS_OFF, %o0! Compute pt_regs arg
 	ba,pt		%xcc, rtrap_clr_l6		! Restore cpu state
 	 nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
 winfix_trampoline:
 	rdpr		%tpc, %g3			! Prepare winfixup TNPC
-	or		%g3, 0x7c, %g3			! Compute offset to branch
+	or		%g3, 0x7c, %g3			! Compute branch offset
 	wrpr		%g3, %tnpc			! Write it into TNPC
 	done						! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused...	*/
 	nop
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP