tile: implement gettimeofday() via vDSO

This change creates the framework for vDSO calls, makes the existing
rt_sigreturn() mechanism use it, and adds a fast gettimeofday().
Now that we need to expose the vDSO address to userspace, we add
AT_SYSINFO_EHDR to the set of aux entries provided to userspace.
(You can disable any extra vDSO support by booting with vdso=0,
but the rt_sigreturn vDSO page will still be provided.)

Note that glibc has supported the tile vDSO since release 2.17.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

1 files changed, 118 insertions, 0 deletions

diff --git a/arch/tile/kernel/vdso/Makefile b/arch/tile/kernel/vdso/Makefile
new file mode 100644
index 00000000000..e2b7a2f4ee4
--- /dev/null
+++ b/arch/tile/kernel/vdso/Makefile
@@ -0,0 +1,118 @@
+# Symbols present in the vdso
+vdso-syms = rt_sigreturn gettimeofday
+
+# Files to link into the vdso
+obj-vdso = $(patsubst %, v%.o, $(vdso-syms))
+
+# Build rules
+targets := $(obj-vdso) vdso.so vdso.so.dbg vdso.lds
+obj-vdso := $(addprefix $(obj)/, $(obj-vdso))
+
+# vdso32 is only for tilegx -m32 compat task.
+VDSO32-$(CONFIG_COMPAT) := y
+
+obj-y += vdso.o
+obj-$(VDSO32-y) += vdso32.o
+extra-y += vdso.lds
+CPPFLAGS_vdso.lds += -P -C -U$(ARCH)
+
+# vDSO code runs in userspace and -pg doesn't help with profiling anyway.
+CFLAGS_REMOVE_vdso.o = -pg
+CFLAGS_REMOVE_vdso32.o = -pg
+CFLAGS_REMOVE_vrt_sigreturn.o = -pg
+CFLAGS_REMOVE_vrt_sigreturn32.o = -pg
+CFLAGS_REMOVE_vgettimeofday.o = -pg
+CFLAGS_REMOVE_vgettimeofday32.o = -pg
+
+ifdef CONFIG_FEEDBACK_COLLECT
+# vDSO code runs in userspace, not collecting feedback data.
+CFLAGS_REMOVE_vdso.o = -ffeedback-generate
+CFLAGS_REMOVE_vdso32.o = -ffeedback-generate
+CFLAGS_REMOVE_vrt_sigreturn.o = -ffeedback-generate
+CFLAGS_REMOVE_vrt_sigreturn32.o = -ffeedback-generate
+CFLAGS_REMOVE_vgettimeofday.o = -ffeedback-generate
+CFLAGS_REMOVE_vgettimeofday32.o = -ffeedback-generate
+endif
+
+# Disable gcov profiling for VDSO code
+GCOV_PROFILE := n
+
+# Force dependency
+$(obj)/vdso.o: $(obj)/vdso.so
+
+# link rule for the .so file, .lds has to be first
+SYSCFLAGS_vdso.so.dbg = $(c_flags)
+$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso)
+	$(call if_changed,vdsold)
+
+
+# We also create a special relocatable object that should mirror the symbol
+# table and layout of the linked DSO.  With ld -R we can then refer to
+# these symbols in the kernel code rather than hand-coded addresses.
+extra-y += vdso-syms.o
+$(obj)/built-in.o: $(obj)/vdso-syms.o
+$(obj)/built-in.o: ld_flags += -R $(obj)/vdso-syms.o
+
+SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \
+                            $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+SYSCFLAGS_vdso_syms.o = -r
+$(obj)/vdso-syms.o: $(src)/vdso.lds $(obj)/vrt_sigreturn.o FORCE
+	$(call if_changed,vdsold)
+
+
+# strip rule for the .so file
+$(obj)/%.so: OBJCOPYFLAGS := -S
+$(obj)/%.so: $(obj)/%.so.dbg FORCE
+	$(call if_changed,objcopy)
+
+# actual build commands
+# The DSO images are built using a special linker script
+# Add -lgcc so tilepro gets static muldi3 and lshrdi3 definitions.
+# Make sure only to export the intended __vdso_xxx symbol offsets.
+quiet_cmd_vdsold = VDSOLD  $@
+      cmd_vdsold = $(CC) $(KCFLAGS) -nostdlib $(SYSCFLAGS_$(@F)) \
+                           -Wl,-T,$(filter-out FORCE,$^) -o $@.tmp -lgcc && \
+                   $(CROSS_COMPILE)objcopy \
+                           $(patsubst %, -G __vdso_%, $(vdso-syms)) $@.tmp $@
+
+# install commands for the unstripped file
+quiet_cmd_vdso_install = INSTALL $@
+      cmd_vdso_install = cp $(obj)/$@.dbg $(MODLIB)/vdso/$@
+
+vdso.so: $(obj)/vdso.so.dbg
+	@mkdir -p $(MODLIB)/vdso
+	$(call cmd,vdso_install)
+
+vdso32.so: $(obj)/vdso32.so.dbg
+	$(call cmd,vdso_install)
+
+vdso_install: vdso.so
+vdso32_install: vdso32.so
+
+
+KBUILD_AFLAGS_32 := $(filter-out -m64,$(KBUILD_AFLAGS))
+KBUILD_AFLAGS_32 += -m32 -s
+KBUILD_CFLAGS_32 := $(filter-out -m64,$(KBUILD_CFLAGS))
+KBUILD_CFLAGS_32 += -m32 -fPIC -shared
+
+obj-vdso32 = $(patsubst %, v%32.o, $(vdso-syms))
+obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32))
+
+targets += $(obj-vdso32) vdso32.so vdso32.so.dbg
+
+$(obj-vdso32:%=%): KBUILD_AFLAGS = $(KBUILD_AFLAGS_32)
+$(obj-vdso32:%=%): KBUILD_CFLAGS = $(KBUILD_CFLAGS_32)
+
+$(obj)/vgettimeofday32.o: $(obj)/vgettimeofday.c
+	$(call if_changed,cc_o_c)
+
+$(obj)/vrt_sigreturn32.o: $(obj)/vrt_sigreturn.S
+	$(call if_changed,as_o_S)
+
+# Force dependency
+$(obj)/vdso32.o: $(obj)/vdso32.so
+
+SYSCFLAGS_vdso32.so.dbg = -m32 -shared -s -Wl,-soname=linux-vdso32.so.1 \
+			    $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
+$(obj)/vdso32.so.dbg: $(src)/vdso.lds $(obj-vdso32)
+	$(call if_changed,vdsold)