Merge tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael J Wysocki:

 - ARM big.LITTLE cpufreq driver from Viresh Kumar.

 - exynos5440 cpufreq driver from Amit Daniel Kachhap.

 - cpufreq core cleanup and code consolidation from Viresh Kumar and
   Stratos Karafotis.

 - cpufreq scalability improvement from Nathan Zimmer.

 - AMD "frequency sensitivity feedback" powersave bias for the ondemand
   cpufreq governor from Jacob Shin.

 - cpuidle code consolidation and cleanups from Daniel Lezcano.

 - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano.

 - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv
   Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto.

 - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle,
   Yasuaki Ishimatsu, and Rafael J Wysocki.

 - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from
   Rafael J Wysocki and Andy Shevchenko.

* tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits)
  cpufreq: Revert incorrect commit 5800043
  cpufreq: MAINTAINERS: Add co-maintainer
  cpuidle: add maintainer entry
  ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points
  ARM: s3c64xx: cpuidle: use init/exit common routine
  cpufreq: pxa2xx: initialize variables
  ACPI: video: correct acpi_video_bus_add error processing
  SH: cpuidle: use init/exit common routine
  ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y
  ACPI: Fix wrong parameter passed to memblock_reserve
  cpuidle: fix comment format
  pnp: use %*phC to dump small buffers
  isapnp: remove debug leftovers
  ARM: imx: cpuidle: use init/exit common routine
  ARM: davinci: cpuidle: use init/exit common routine
  ARM: kirkwood: cpuidle: use init/exit common routine
  ARM: calxeda: cpuidle: use init/exit common routine
  ARM: tegra: cpuidle: use init/exit common routine for tegra3
  ARM: tegra: cpuidle: use init/exit common routine for tegra2
  ARM: OMAP4: cpuidle: use init/exit common routine
  ...

2 files changed, 0 insertions, 94 deletions

diff --git a/arch/unicore32/kernel/Makefile b/arch/unicore32/kernel/Makefile
index fa497e0efe5..607a72f2ae3 100644
--- a/arch/unicore32/kernel/Makefile
+++ b/arch/unicore32/kernel/Makefile
@@ -9,7 +9,6 @@ obj-y				+= setup.o signal.o sys.o stacktrace.o traps.o
 obj-$(CONFIG_MODULES)		+= ksyms.o module.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
-obj-$(CONFIG_CPU_FREQ)		+= cpu-ucv2.o
 obj-$(CONFIG_UNICORE_FPU_F64)	+= fpu-ucf64.o
 
 # obj-y for architecture PKUnity v3
diff --git a/arch/unicore32/kernel/cpu-ucv2.c b/arch/unicore32/kernel/cpu-ucv2.c
deleted file mode 100644
index 4a99f62584c..00000000000
--- a/arch/unicore32/kernel/cpu-ucv2.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * linux/arch/unicore32/kernel/cpu-ucv2.c: clock scaling for the UniCore-II
- *
- * Code specific to PKUnity SoC and UniCore ISA
- *
- *	Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn>
- *	Copyright (C) 2001-2010 Guan Xuetao
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/cpufreq.h>
-
-#include <mach/hardware.h>
-
-static struct cpufreq_driver ucv2_driver;
-
-/* make sure that only the "userspace" governor is run
- * -- anything else wouldn't make sense on this platform, anyway.
- */
-int ucv2_verify_speed(struct cpufreq_policy *policy)
-{
-	if (policy->cpu)
-		return -EINVAL;
-
-	cpufreq_verify_within_limits(policy,
-			policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
-	return 0;
-}
-
-static unsigned int ucv2_getspeed(unsigned int cpu)
-{
-	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
-
-	if (cpu)
-		return 0;
-	return clk_get_rate(mclk)/1000;
-}
-
-static int ucv2_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
-{
-	unsigned int cur = ucv2_getspeed(0);
-	struct cpufreq_freqs freqs;
-	struct clk *mclk = clk_get(NULL, "MAIN_CLK");
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
-	if (!clk_set_rate(mclk, target_freq * 1000)) {
-		freqs.old = cur;
-		freqs.new = target_freq;
-		freqs.cpu = 0;
-	}
-
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
-	return 0;
-}
-
-static int __init ucv2_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = ucv2_getspeed(0);
-	policy->min = policy->cpuinfo.min_freq = 250000;
-	policy->max = policy->cpuinfo.max_freq = 1000000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
-	return 0;
-}
-
-static struct cpufreq_driver ucv2_driver = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= ucv2_verify_speed,
-	.target		= ucv2_target,
-	.get		= ucv2_getspeed,
-	.init		= ucv2_cpu_init,
-	.name		= "UniCore-II",
-};
-
-static int __init ucv2_cpufreq_init(void)
-{
-	return cpufreq_register_driver(&ucv2_driver);
-}
-
-arch_initcall(ucv2_cpufreq_init);