diff options
| author | Yinghai Lu <yhlu.kernel@gmail.com> | 2008-08-19 20:50:42 -0700 |
|---|---|---|
| committer | Ingo Molnar <mingo@elte.hu> | 2008-10-16 16:52:55 +0200 |
| commit | 26d347c2c035b1f4c5b3c5094f3046db9ec920f5 (patch) | |
| tree | bbb6dc5b6473c3d1c00255e844a21ed40809a700 /arch/x86/kernel/io_apic_32.c | |
| parent | 54168ed7f2a4f3fc2780e645124ae952598da601 (diff) | |
rename io_apic_64.c and io_apic_32.c to io_apic.c
The two files are now line by line equal. (sans a printk)
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Diffstat (limited to 'arch/x86/kernel/io_apic_32.c')
| -rw-r--r-- | arch/x86/kernel/io_apic_32.c | 3913 |
1 files changed, 0 insertions, 3913 deletions
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c deleted file mode 100644 index fba6d6ee348..00000000000 --- a/arch/x86/kernel/io_apic_32.c +++ /dev/null @@ -1,3913 +0,0 @@ -/* - * Intel IO-APIC support for multi-Pentium hosts. - * - * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo - * - * Many thanks to Stig Venaas for trying out countless experimental - * patches and reporting/debugging problems patiently! - * - * (c) 1999, Multiple IO-APIC support, developed by - * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and - * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, - * further tested and cleaned up by Zach Brown <zab@redhat.com> - * and Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively - * Paul Diefenbaugh : Added full ACPI support - */ - -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/mc146818rtc.h> -#include <linux/compiler.h> -#include <linux/acpi.h> -#include <linux/module.h> -#include <linux/sysdev.h> -#include <linux/msi.h> -#include <linux/htirq.h> -#include <linux/freezer.h> -#include <linux/kthread.h> -#include <linux/jiffies.h> /* time_after() */ -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif -#include <linux/bootmem.h> -#include <linux/dmar.h> - -#include <asm/idle.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/desc.h> -#include <asm/proto.h> -#include <asm/acpi.h> -#include <asm/dma.h> -#include <asm/timer.h> -#include <asm/i8259.h> -#include <asm/nmi.h> -#include <asm/msidef.h> -#include <asm/hypertransport.h> -#include <asm/setup.h> -#include <asm/irq_remapping.h> - -#include <mach_ipi.h> -#include <mach_apic.h> -#include <mach_apicdef.h> - -#define __apicdebuginit(type) static type __init - -/* - * Is the SiS APIC rmw bug present ? - * -1 = don't know, 0 = no, 1 = yes - */ -int sis_apic_bug = -1; - -static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); - -int first_free_entry; -/* - * Rough estimation of how many shared IRQs there are, can - * be changed anytime. - */ -int pin_map_size; - -/* - * # of IRQ routing registers - */ -int nr_ioapic_registers[MAX_IO_APICS]; - -/* I/O APIC entries */ -struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; -int nr_ioapics; - -/* MP IRQ source entries */ -struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; - -/* # of MP IRQ source entries */ -int mp_irq_entries; - -#if defined (CONFIG_MCA) || defined (CONFIG_EISA) -int mp_bus_id_to_type[MAX_MP_BUSSES]; -#endif - -DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); - -int skip_ioapic_setup; - -static int __init parse_noapic(char *str) -{ - /* disable IO-APIC */ - disable_ioapic_setup(); - return 0; -} -early_param("noapic", parse_noapic); - -struct irq_cfg; -struct irq_pin_list; -struct irq_cfg { - unsigned int irq; - struct irq_cfg *next; - struct irq_pin_list *irq_2_pin; - cpumask_t domain; - cpumask_t old_domain; - unsigned move_cleanup_count; - u8 vector; - u8 move_in_progress : 1; -}; - -/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */ -static struct irq_cfg irq_cfg_legacy[] __initdata = { - [0] = { .irq = 0, .domain = CPU_MASK_ALL, .vector = IRQ0_VECTOR, }, - [1] = { .irq = 1, .domain = CPU_MASK_ALL, .vector = IRQ1_VECTOR, }, - [2] = { .irq = 2, .domain = CPU_MASK_ALL, .vector = IRQ2_VECTOR, }, - [3] = { .irq = 3, .domain = CPU_MASK_ALL, .vector = IRQ3_VECTOR, }, - [4] = { .irq = 4, .domain = CPU_MASK_ALL, .vector = IRQ4_VECTOR, }, - [5] = { .irq = 5, .domain = CPU_MASK_ALL, .vector = IRQ5_VECTOR, }, - [6] = { .irq = 6, .domain = CPU_MASK_ALL, .vector = IRQ6_VECTOR, }, - [7] = { .irq = 7, .domain = CPU_MASK_ALL, .vector = IRQ7_VECTOR, }, - [8] = { .irq = 8, .domain = CPU_MASK_ALL, .vector = IRQ8_VECTOR, }, - [9] = { .irq = 9, .domain = CPU_MASK_ALL, .vector = IRQ9_VECTOR, }, - [10] = { .irq = 10, .domain = CPU_MASK_ALL, .vector = IRQ10_VECTOR, }, - [11] = { .irq = 11, .domain = CPU_MASK_ALL, .vector = IRQ11_VECTOR, }, - [12] = { .irq = 12, .domain = CPU_MASK_ALL, .vector = IRQ12_VECTOR, }, - [13] = { .irq = 13, .domain = CPU_MASK_ALL, .vector = IRQ13_VECTOR, }, - [14] = { .irq = 14, .domain = CPU_MASK_ALL, .vector = IRQ14_VECTOR, }, - [15] = { .irq = 15, .domain = CPU_MASK_ALL, .vector = IRQ15_VECTOR, }, -}; - -static struct irq_cfg irq_cfg_init = { .irq = -1U, }; -/* need to be biger than size of irq_cfg_legacy */ -static int nr_irq_cfg = 32; - -static int __init parse_nr_irq_cfg(char *arg) -{ - if (arg) { - nr_irq_cfg = simple_strtoul(arg, NULL, 0); - if (nr_irq_cfg < 32) - nr_irq_cfg = 32; - } - return 0; -} - -early_param("nr_irq_cfg", parse_nr_irq_cfg); - -static void init_one_irq_cfg(struct irq_cfg *cfg) -{ - memcpy(cfg, &irq_cfg_init, sizeof(struct irq_cfg)); -} - -static struct irq_cfg *irq_cfgx; -static struct irq_cfg *irq_cfgx_free; -static void __init init_work(void *data) -{ - struct dyn_array *da = data; - struct irq_cfg *cfg; - int legacy_count; - int i; - - cfg = *da->name; - - memcpy(cfg, irq_cfg_legacy, sizeof(irq_cfg_legacy)); - - legacy_count = sizeof(irq_cfg_legacy)/sizeof(irq_cfg_legacy[0]); - for (i = legacy_count; i < *da->nr; i++) - init_one_irq_cfg(&cfg[i]); - - for (i = 1; i < *da->nr; i++) - cfg[i-1].next = &cfg[i]; - - irq_cfgx_free = &irq_cfgx[legacy_count]; - irq_cfgx[legacy_count - 1].next = NULL; -} - -#define for_each_irq_cfg(cfg) \ - for (cfg = irq_cfgx; cfg; cfg = cfg->next) - -DEFINE_DYN_ARRAY(irq_cfgx, sizeof(struct irq_cfg), nr_irq_cfg, PAGE_SIZE, init_work); - -static struct irq_cfg *irq_cfg(unsigned int irq) -{ - struct irq_cfg *cfg; - - cfg = irq_cfgx; - while (cfg) { - if (cfg->irq == irq) - return cfg; - - cfg = cfg->next; - } - - return NULL; -} - -static struct irq_cfg *irq_cfg_alloc(unsigned int irq) -{ - struct irq_cfg *cfg, *cfg_pri; - int i; - int count = 0; - - cfg_pri = cfg = irq_cfgx; - while (cfg) { - if (cfg->irq == irq) - return cfg; - - cfg_pri = cfg; - cfg = cfg->next; - count++; - } - - if (!irq_cfgx_free) { - unsigned long phys; - unsigned long total_bytes; - /* - * we run out of pre-allocate ones, allocate more - */ - printk(KERN_DEBUG "try to get more irq_cfg %d\n", nr_irq_cfg); - - total_bytes = sizeof(struct irq_cfg) * nr_irq_cfg; - if (after_bootmem) - cfg = kzalloc(total_bytes, GFP_ATOMIC); - else - cfg = __alloc_bootmem_nopanic(total_bytes, PAGE_SIZE, 0); - - if (!cfg) - panic("please boot with nr_irq_cfg= %d\n", count * 2); - - phys = __pa(cfg); - printk(KERN_DEBUG "irq_irq ==> [%#lx - %#lx]\n", phys, phys + total_bytes); - - for (i = 0; i < nr_irq_cfg; i++) - init_one_irq_cfg(&cfg[i]); - - for (i = 1; i < nr_irq_cfg; i++) - cfg[i-1].next = &cfg[i]; - - irq_cfgx_free = cfg; - } - - cfg = irq_cfgx_free; - irq_cfgx_free = irq_cfgx_free->next; - cfg->next = NULL; - if (cfg_pri) - cfg_pri->next = cfg; - else - irq_cfgx = cfg; - cfg->irq = irq; - printk(KERN_DEBUG "found new irq_cfg for irq %d\n", cfg->irq); -#ifdef CONFIG_HAVE_SPARSE_IRQ_DEBUG - { - /* dump the results */ - struct irq_cfg *cfg; - unsigned long phys; - unsigned long bytes = sizeof(struct irq_cfg); - - printk(KERN_DEBUG "=========================== %d\n", irq); - printk(KERN_DEBUG "irq_cfg dump after get that for %d\n", irq); - for_each_irq_cfg(cfg) { - phys = __pa(cfg); - printk(KERN_DEBUG "irq_cfg %d ==> [%#lx - %#lx]\n", cfg->irq, phys, phys + bytes); - } - printk(KERN_DEBUG "===========================\n"); - } -#endif - return cfg; -} - -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - -struct irq_pin_list { - int apic, pin; - struct irq_pin_list *next; -}; - -static struct irq_pin_list *irq_2_pin_head; -/* fill one page ? */ -static int nr_irq_2_pin = 0x100; -static struct irq_pin_list *irq_2_pin_ptr; -static void __init irq_2_pin_init_work(void *data) -{ - struct dyn_array *da = data; - struct irq_pin_list *pin; - int i; - - pin = *da->name; - - for (i = 1; i < *da->nr; i++) - pin[i-1].next = &pin[i]; - - irq_2_pin_ptr = &pin[0]; -} -DEFINE_DYN_ARRAY(irq_2_pin_head, sizeof(struct irq_pin_list), nr_irq_2_pin, PAGE_SIZE, irq_2_pin_init_work); - -static struct irq_pin_list *get_one_free_irq_2_pin(void) -{ - struct irq_pin_list *pin; - int i; - - pin = irq_2_pin_ptr; - - if (pin) { - irq_2_pin_ptr = pin->next; - pin->next = NULL; - return pin; - } - - /* - * we run out of pre-allocate ones, allocate more - */ - printk(KERN_DEBUG "try to get more irq_2_pin %d\n", nr_irq_2_pin); - - if (after_bootmem) - pin = kzalloc(sizeof(struct irq_pin_list)*nr_irq_2_pin, - GFP_ATOMIC); - else - pin = __alloc_bootmem_nopanic(sizeof(struct irq_pin_list) * - nr_irq_2_pin, PAGE_SIZE, 0); - - if (!pin) - panic("can not get more irq_2_pin\n"); - - for (i = 1; i < nr_irq_2_pin; i++) - pin[i-1].next = &pin[i]; - - irq_2_pin_ptr = pin->next; - pin->next = NULL; - - return pin; -} - -struct io_apic { - unsigned int index; - unsigned int unused[3]; - unsigned int data; -}; - -static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) -{ - return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); -} - -static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - return readl(&io_apic->data); -} - -static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - writel(reg, &io_apic->index); - writel(value, &io_apic->data); -} - -/* - * Re-write a value: to be used for read-modify-write - * cycles where the read already set up the index register. - * - * Older SiS APIC requires we rewrite the index register - */ -static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - if (sis_apic_bug) - writel(reg, &io_apic->index); - writel(value, &io_apic->data); -} - -#ifdef CONFIG_X86_64 -static bool io_apic_level_ack_pending(unsigned int irq) -{ - struct irq_pin_list *entry; - unsigned long flags; - struct irq_cfg *cfg = irq_cfg(irq); - - spin_lock_irqsave(&ioapic_lock, flags); - entry = cfg->irq_2_pin; - for (;;) { - unsigned int reg; - int pin; - - if (!entry) - break; - pin = entry->pin; - reg = io_apic_read(entry->apic, 0x10 + pin*2); - /* Is the remote IRR bit set? */ - if (reg & IO_APIC_REDIR_REMOTE_IRR) { - spin_unlock_irqrestore(&ioapic_lock, flags); - return true; - } - if (!entry->next) - break; - entry = entry->next; - } - spin_unlock_irqrestore(&ioapic_lock, flags); - - return false; -} -#endif - -union entry_union { - struct { u32 w1, w2; }; - struct IO_APIC_route_entry entry; -}; - -static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) -{ - union entry_union eu; - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - return eu.entry; -} - -/* - * When we write a new IO APIC routing entry, we need to write the high - * word first! If the mask bit in the low word is clear, we will enable - * the interrupt, and we need to make sure the entry is fully populated - * before that happens. - */ -static void -__ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - union entry_union eu; - eu.entry = e; - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); -} - -static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - __ioapic_write_entry(apic, pin, e); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -/* - * When we mask an IO APIC routing entry, we need to write the low - * word first, in order to set the mask bit before we change the - * high bits! - */ -static void ioapic_mask_entry(int apic, int pin) -{ - unsigned long flags; - union entry_union eu = { .entry.mask = 1 }; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -#ifdef CONFIG_SMP -static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, u8 vector) -{ - int apic, pin; - struct irq_cfg *cfg; - struct irq_pin_list *entry; - - cfg = irq_cfg(irq); - entry = cfg->irq_2_pin; - for (;;) { - unsigned int reg; - - if (!entry) - break; - - apic = entry->apic; - pin = entry->pin; -#ifdef CONFIG_INTR_REMAP - /* - * With interrupt-remapping, destination information comes - * from interrupt-remapping table entry. - */ - if (!irq_remapped(irq)) - io_apic_write(apic, 0x11 + pin*2, dest); -#else - io_apic_write(apic, 0x11 + pin*2, dest); -#endif - reg = io_apic_read(apic, 0x10 + pin*2); - reg &= ~IO_APIC_REDIR_VECTOR_MASK; - reg |= vector; - io_apic_modify(apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; - } -} - -static int assign_irq_vector(int irq, cpumask_t mask); - -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - unsigned long flags; - unsigned int dest; - cpumask_t tmp; - struct irq_desc *desc; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - cfg = irq_cfg(irq); - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - desc = irq_to_desc(irq); - spin_lock_irqsave(&ioapic_lock, flags); - __target_IO_APIC_irq(irq, dest, cfg->vector); - desc->affinity = mask; - spin_unlock_irqrestore(&ioapic_lock, flags); -} -#endif /* CONFIG_SMP */ - -/* - * The common case is 1:1 IRQ<->pin mappings. Sometimes there are - * shared ISA-space IRQs, so we have to support them. We are super - * fast in the common case, and fast for shared ISA-space IRQs. - */ -static void add_pin_to_irq(unsigned int irq, int apic, int pin) -{ - struct irq_cfg *cfg; - struct irq_pin_list *entry; - - /* first time to refer irq_cfg, so with new */ - cfg = irq_cfg_alloc(irq); - entry = cfg->irq_2_pin; - if (!entry) { - entry = get_one_free_irq_2_pin(); - cfg->irq_2_pin = entry; - entry->apic = apic; - entry->pin = pin; - printk(KERN_DEBUG " 0 add_pin_to_irq: irq %d --> apic %d pin %d\n", irq, apic, pin); - return; - } - - while (entry->next) { - /* not again, please */ - if (entry->apic == apic && entry->pin == pin) - return; - - entry = entry->next; - } - - entry->next = get_one_free_irq_2_pin(); - entry = entry->next; - entry->apic = apic; - entry->pin = pin; - printk(KERN_DEBUG " x add_pin_to_irq: irq %d --> apic %d pin %d\n", irq, apic, pin); -} - -/* - * Reroute an IRQ to a different pin. - */ -static void __init replace_pin_at_irq(unsigned int irq, - int oldapic, int oldpin, - int newapic, int newpin) -{ - struct irq_cfg *cfg = irq_cfg(irq); - struct irq_pin_list *entry = cfg->irq_2_pin; - int replaced = 0; - - while (entry) { - if (entry->apic == oldapic && entry->pin == oldpin) { - entry->apic = newapic; - entry->pin = newpin; - replaced = 1; - /* every one is different, right? */ - break; - } - entry = entry->next; - } - - /* why? call replace before add? */ - if (!replaced) - add_pin_to_irq(irq, newapic, newpin); -} - -#ifdef CONFIG_X86_64 -/* - * Synchronize the IO-APIC and the CPU by doing - * a dummy read from the IO-APIC - */ -static inline void io_apic_sync(unsigned int apic) -{ - struct io_apic __iomem *io_apic = io_apic_base(apic); - readl(&io_apic->data); -} - -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_cfg *cfg; \ - struct irq_pin_list *entry; \ - \ - cfg = irq_cfg(irq); \ - entry = cfg->irq_2_pin; \ - for (;;) { \ - unsigned int reg; \ - if (!entry) \ - break; \ - pin = entry->pin; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, 0x10 + R + pin*2, reg); \ - FINAL; \ - if (!entry->next) \ - break; \ - entry = entry->next; \ - } \ -} - -#define DO_ACTION(name,R,ACTION, FINAL) \ - \ - static void name##_IO_APIC_irq (unsigned int irq) \ - __DO_ACTION(R, ACTION, FINAL) - -/* mask = 1 */ -DO_ACTION(__mask, 0, |= IO_APIC_REDIR_MASKED, io_apic_sync(entry->apic)) - -/* mask = 0 */ -DO_ACTION(__unmask, 0, &= ~IO_APIC_REDIR_MASKED, ) - -#else - -static void __modify_IO_APIC_irq(unsigned int irq, unsigned long enable, unsigned long disable) -{ - struct irq_cfg *cfg; - struct irq_pin_list *entry; - unsigned int pin, reg; - - cfg = irq_cfg(irq); - entry = cfg->irq_2_pin; - for (;;) { - if (!entry) - break; - pin = entry->pin; - reg = io_apic_read(entry->apic, 0x10 + pin*2); - reg &= ~disable; - reg |= enable; - io_apic_modify(entry->apic, 0x10 + pin*2, reg); - if (!entry->next) - break; - entry = entry->next; - } -} - -/* mask = 1 */ -static void __mask_IO_APIC_irq(unsigned int irq) -{ - __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, 0); -} - -/* mask = 0 */ -static void __unmask_IO_APIC_irq(unsigned int irq) -{ - __modify_IO_APIC_irq(irq, 0, IO_APIC_REDIR_MASKED); -} - -/* mask = 1, trigger = 0 */ -static void __mask_and_edge_IO_APIC_irq(unsigned int irq) -{ - __modify_IO_APIC_irq(irq, IO_APIC_REDIR_MASKED, - IO_APIC_REDIR_LEVEL_TRIGGER); -} - -/* mask = 0, trigger = 1 */ -static void __unmask_and_level_IO_APIC_irq(unsigned int irq) -{ - __modify_IO_APIC_irq(irq, IO_APIC_REDIR_LEVEL_TRIGGER, - IO_APIC_REDIR_MASKED); -} - -#endif - -static void mask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __mask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void unmask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) -{ - struct IO_APIC_route_entry entry; - - /* Check delivery_mode to be sure we're not clearing an SMI pin */ - entry = ioapic_read_entry(apic, pin); - if (entry.delivery_mode == dest_SMI) - return; - /* - * Disable it in the IO-APIC irq-routing table: - */ - ioapic_mask_entry(apic, pin); -} - -static void clear_IO_APIC (void) -{ - int apic, pin; - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - clear_IO_APIC_pin(apic, pin); -} - -#if !defined(CONFIG_SMP) && defined(CONFIG_X86_32) -void send_IPI_self(int vector) -{ - unsigned int cfg; - - /* - * Wait for idle. - */ - apic_wait_icr_idle(); - cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; - /* - * Send the IPI. The write to APIC_ICR fires this off. - */ - apic_write(APIC_ICR, cfg); -} -#endif /* !CONFIG_SMP && CONFIG_X86_32*/ - -#ifdef CONFIG_X86_32 -/* - * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to - * specific CPU-side IRQs. - */ - -#define MAX_PIRQS 8 -static int pirq_entries [MAX_PIRQS]; -static int pirqs_enabled; - -static int __init ioapic_pirq_setup(char *str) -{ - int i, max; - int ints[MAX_PIRQS+1]; - - get_options(str, ARRAY_SIZE(ints), ints); - - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; - - pirqs_enabled = 1; - apic_printk(APIC_VERBOSE, KERN_INFO - "PIRQ redirection, working around broken MP-BIOS.\n"); - max = MAX_PIRQS; - if (ints[0] < MAX_PIRQS) - max = ints[0]; - - for (i = 0; i < max; i++) { - apic_printk(APIC_VERBOSE, KERN_DEBUG - "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); - /* - * PIRQs are mapped upside down, usually. - */ - pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; - } - return 1; -} - -__setup("pirq=", ioapic_pirq_setup); -#endif /* CONFIG_X86_32 */ - -#ifdef CONFIG_INTR_REMAP -/* I/O APIC RTE contents at the OS boot up */ -static struct IO_APIC_route_entry *early_ioapic_entries[MAX_IO_APICS]; - -/* - * Saves and masks all the unmasked IO-APIC RTE's - */ -int save_mask_IO_APIC_setup(void) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - int apic, pin; - - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } - - for (apic = 0; apic < nr_ioapics; apic++) { - early_ioapic_entries[apic] = - kzalloc(sizeof(struct IO_APIC_route_entry) * - nr_ioapic_registers[apic], GFP_KERNEL); - if (!early_ioapic_entries[apic]) - return -ENOMEM; - } - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - struct IO_APIC_route_entry entry; - - entry = early_ioapic_entries[apic][pin] = - ioapic_read_entry(apic, pin); - if (!entry.mask) { - entry.mask = 1; - ioapic_write_entry(apic, pin, entry); - } - } - return 0; -} - -void restore_IO_APIC_setup(void) -{ - int apic, pin; - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - ioapic_write_entry(apic, pin, - early_ioapic_entries[apic][pin]); -} - -void reinit_intr_remapped_IO_APIC(int intr_remapping) -{ - /* - * for now plain restore of previous settings. - * TBD: In the case of OS enabling interrupt-remapping, - * IO-APIC RTE's need to be setup to point to interrupt-remapping - * table entries. for now, do a plain restore, and wait for - * the setup_IO_APIC_irqs() to do proper initialization. - */ - restore_IO_APIC_setup(); -} -#endif - -/* - * Find the IRQ entry number of a certain pin. - */ -static int find_irq_entry(int apic, int pin, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_irqtype == type && - (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mp_dstapic == MP_APIC_ALL) && - mp_irqs[i].mp_dstirq == pin) - return i; - - return -1; -} - -/* - * Find the pin to which IRQ[irq] (ISA) is connected - */ -static int __init find_isa_irq_pin(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mp_irqtype == type) && - (mp_irqs[i].mp_srcbusirq == irq)) - - return mp_irqs[i].mp_dstirq; - } - return -1; -} - -static int __init find_isa_irq_apic(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mp_irqtype == type) && - (mp_irqs[i].mp_srcbusirq == irq)) - break; - } - if (i < mp_irq_entries) { - int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) - return apic; - } - } - - return -1; -} - -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", - bus, slot, pin); - if (test_bit(bus, mp_bus_not_pci)) { - apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || - mp_irqs[i].mp_dstapic == MP_APIC_ALL) - break; - - if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mp_irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].mp_srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - return best_guess; -} - -EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); - -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) -/* - * EISA Edge/Level control register, ELCR - */ -static int EISA_ELCR(unsigned int irq) -{ - if (irq < 16) { - unsigned int port = 0x4d0 + (irq >> 3); - return (inb(port) >> (irq & 7)) & 1; - } - apic_printk(APIC_VERBOSE, KERN_INFO - "Broken MPtable reports ISA irq %d\n", irq); - return 0; -} - -#endif - -/* ISA interrupts are always polarity zero edge triggered, - * when listed as conforming in the MP table. */ - -#define default_ISA_trigger(idx) (0) -#define default_ISA_polarity(idx) (0) - -/* EISA interrupts are always polarity zero and can be edge or level - * trigger depending on the ELCR value. If an interrupt is listed as - * EISA conforming in the MP table, that means its trigger type must - * be read in from the ELCR */ - -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) -#define default_EISA_polarity(idx) default_ISA_polarity(idx) - -/* PCI interrupts are always polarity one level triggered, - * when listed as conforming in the MP table. */ - -#define default_PCI_trigger(idx) (1) -#define default_PCI_polarity(idx) (1) - -/* MCA interrupts are always polarity zero level triggered, - * when listed as conforming in the MP table. */ - -#define default_MCA_trigger(idx) (1) -#define default_MCA_polarity(idx) default_ISA_polarity(idx) - -static int MPBIOS_polarity(int idx) -{ - int bus = mp_irqs[idx].mp_srcbus; - int polarity; - - /* - * Determine IRQ line polarity (high active or low active): - */ - switch (mp_irqs[idx].mp_irqflag & 3) - { - case 0: /* conforms, ie. bus-type dependent polarity */ - if (test_bit(bus, mp_bus_not_pci)) - polarity = default_ISA_polarity(idx); - else - polarity = default_PCI_polarity(idx); - break; - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } - return polarity; -} - -static int MPBIOS_trigger(int idx) -{ - int bus = mp_irqs[idx].mp_srcbus; - int trigger; - - /* - * Determine IRQ trigger mode (edge or level sensitive): - */ - switch ((mp_irqs[idx].mp_irqflag>>2) & 3) - { - case 0: /* conforms, ie. bus-type dependent */ - if (test_bit(bus, mp_bus_not_pci)) - trigger = default_ISA_trigger(idx); - else - trigger = default_PCI_trigger(idx); -#if defined(CONFIG_EISA) || defined(CONFIG_MCA) - switch (mp_bus_id_to_type[bus]) { - case MP_BUS_ISA: /* ISA pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_EISA: /* EISA pin */ - { - trigger = default_EISA_trigger(idx); - break; - } - case MP_BUS_PCI: /* PCI pin */ - { - /* set before the switch */ - break; - } - case MP_BUS_MCA: /* MCA pin */ - { - trigger = default_MCA_trigger(idx); - break; - } - default: - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - } -#endif - break; - case 1: /* edge */ - { - trigger = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - case 3: /* level */ - { - trigger = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; - break; - } - } - return trigger; -} - -static inline int irq_polarity(int idx) -{ - return MPBIOS_polarity(idx); -} - -static inline int irq_trigger(int idx) -{ - return MPBIOS_trigger(idx); -} - -int (*ioapic_renumber_irq)(int ioapic, int irq); -static int pin_2_irq(int idx, int apic, int pin) -{ - int irq, i; - int bus = mp_irqs[idx].mp_srcbus; - - /* - * Debugging check, we are in big trouble if this message pops up! - */ - if (mp_irqs[idx].mp_dstirq != pin) - printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - - if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mp_srcbusirq; - } else { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - /* - * For MPS mode, so far only needed by ES7000 platform - */ - if (ioapic_renumber_irq) - irq = ioapic_renumber_irq(apic, irq); - } - -#ifdef CONFIG_X86_32 - /* - * PCI IRQ command line redirection. Yes, limits are hardcoded. - */ - if ((pin >= 16) && (pin <= 23)) { - if (pirq_entries[pin-16] != -1) { - if (!pirq_entries[pin-16]) { - apic_printk(APIC_VERBOSE, KERN_DEBUG - "disabling PIRQ%d\n", pin-16); - } else { - irq = pirq_entries[pin-16]; - apic_printk(APIC_VERBOSE, KERN_DEBUG - "using PIRQ%d -> IRQ %d\n", - pin-16, irq); - } - } - } -#endif - - return irq; -} - -void lock_vector_lock(void) -{ - /* Used to the online set of cpus does not change - * during assign_irq_vector. - */ - spin_lock(&vector_lock); -} - -void unlock_vector_lock(void) -{ - spin_unlock(&vector_lock); -} - -static int __assign_irq_vector(int irq, cpumask_t mask) -{ - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; - unsigned int old_vector; - int cpu; - struct irq_cfg *cfg; - - cfg = irq_cfg(irq); - - /* Only try and allocate irqs on cpus that are present */ - cpus_and(mask, mask, cpu_online_map); - - if ((cfg->move_in_progress) || cfg->move_cleanup_count) - return -EBUSY; - - old_vector = cfg->vector; - if (old_vector) { - cpumask_t tmp; - cpus_and(tmp, cfg->domain, mask); - if (!cpus_empty(tmp)) - return 0; - } - - for_each_cpu_mask_nr(cpu, mask) { - cpumask_t domain, new_mask; - int new_cpu; - int vector, offset; - - domain = vector_allocation_domain(cpu); - cpus_and(new_mask, domain, cpu_online_map); - - vector = current_vector; - offset = current_offset; -next: - vector += 8; - if (vector >= first_system_vector) { - /* If we run out of vectors on large boxen, must share them. */ - offset = (offset + 1) % 8; - vector = FIRST_DEVICE_VECTOR + offset; - } - if (unlikely(current_vector == vector)) - continue; -#ifdef CONFIG_X86_64 - if (vector == IA32_SYSCALL_VECTOR) - goto next; -#else - if (vector == SYSCALL_VECTOR) - goto next; -#endif - for_each_cpu_mask_nr(new_cpu, new_mask) - if (per_cpu(vector_irq, new_cpu)[vector] != -1) - goto next; - /* Found one! */ - current_vector = vector; - current_offset = offset; - if (old_vector) { - cfg->move_in_progress = 1; - cfg->old_domain = cfg->domain; - } - for_each_cpu_mask_nr(new_cpu, new_mask) - per_cpu(vector_irq, new_cpu)[vector] = irq; - cfg->vector = vector; - cfg->domain = domain; - return 0; - } - return -ENOSPC; -} - -static int assign_irq_vector(int irq, cpumask_t mask) -{ - int err; - unsigned long flags; - - spin_lock_irqsave(&vector_lock, flags); - err = __assign_irq_vector(irq, mask); - spin_unlock_irqrestore(&vector_lock, flags); - return err; -} - -static void __clear_irq_vector(int irq) -{ - struct irq_cfg *cfg; - cpumask_t mask; - int cpu, vector; - - cfg = irq_cfg(irq); - BUG_ON(!cfg->vector); - - vector = cfg->vector; - cpus_and(mask, cfg->domain, cpu_online_map); - for_each_cpu_mask_nr(cpu, mask) - per_cpu(vector_irq, cpu)[vector] = -1; - - cfg->vector = 0; - cpus_clear(cfg->domain); -} - -void __setup_vector_irq(int cpu) -{ - /* Initialize vector_irq on a new cpu */ - /* This function must be called with vector_lock held */ - int irq, vector; - struct irq_cfg *cfg; - - /* Mark the inuse vectors */ - for_each_irq_cfg(cfg) { - if (!cpu_isset(cpu, cfg->domain)) - continue; - vector = cfg->vector; - irq = cfg->irq; - per_cpu(vector_irq, cpu)[vector] = irq; - } - /* Mark the free vectors */ - for (vector = 0; vector < NR_VECTORS; ++vector) { - irq = per_cpu(vector_irq, cpu)[vector]; - if (irq < 0) - continue; - - cfg = irq_cfg(irq); - if (!cpu_isset(cpu, cfg->domain)) - per_cpu(vector_irq, cpu)[vector] = -1; - } -} - -static struct irq_chip ioapic_chip; -#ifdef CONFIG_INTR_REMAP -static struct irq_chip ir_ioapic_chip; -#endif - -#define IOAPIC_AUTO -1 -#define IOAPIC_EDGE 0 -#define IOAPIC_LEVEL 1 - -#ifdef CONFIG_X86_32 -static inline int IO_APIC_irq_trigger(int irq) -{ - int apic, idx, pin; - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic, pin, mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin))) - return irq_trigger(idx); - } - } - /* - * nonexistent IRQs are edge default - */ - return 0; -} -#else -static inline int IO_APIC_irq_trigger(int irq) -{ - return 1; -} -#endif - -static void ioapic_register_intr(int irq, unsigned long trigger) -{ - struct irq_desc *desc; - - /* first time to use this irq_desc */ - if (irq < 16) - desc = irq_to_desc(irq); - else - desc = irq_to_desc_alloc(irq); - - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) - desc->status |= IRQ_LEVEL; - else - desc->status &= ~IRQ_LEVEL; - -#ifdef CONFIG_INTR_REMAP - if (irq_remapped(irq)) { - desc->status |= IRQ_MOVE_PCNTXT; - if (trigger) - set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, - handle_fasteoi_irq, - "fasteoi"); - else - set_irq_chip_and_handler_name(irq, &ir_ioapic_chip, - handle_edge_irq, "edge"); - return; - } -#endif - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_fasteoi_irq, - "fasteoi"); - else - set_irq_chip_and_handler_name(irq, &ioapic_chip, - handle_edge_irq, "edge"); -} - -static int setup_ioapic_entry(int apic, int irq, - struct IO_APIC_route_entry *entry, - unsigned int destination, int trigger, - int polarity, int vector) -{ - /* - * add it to the IO-APIC irq-routing table: - */ - memset(entry,0,sizeof(*entry)); - -#ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) { - struct intel_iommu *iommu = map_ioapic_to_ir(apic); - struct irte irte; - struct IR_IO_APIC_route_entry *ir_entry = - (struct IR_IO_APIC_route_entry *) entry; - int index; - - if (!iommu) - panic("No mapping iommu for ioapic %d\n", apic); - - index = alloc_irte(iommu, irq, 1); - if (index < 0) - panic("Failed to allocate IRTE for ioapic %d\n", apic); - - memset(&irte, 0, sizeof(irte)); - - irte.present = 1; - irte.dst_mode = INT_DEST_MODE; - irte.trigger_mode = trigger; - irte.dlvry_mode = INT_DELIVERY_MODE; - irte.vector = vector; - irte.dest_id = IRTE_DEST(destination); - - modify_irte(irq, &irte); - - ir_entry->index2 = (index >> 15) & 0x1; - ir_entry->zero = 0; - ir_entry->format = 1; - ir_entry->index = (index & 0x7fff); - } else -#endif - { - entry->delivery_mode = INT_DELIVERY_MODE; - entry->dest_mode = INT_DEST_MODE; - entry->dest = destination; - } - - entry->mask = 0; /* enable IRQ */ - entry->trigger = trigger; - entry->polarity = polarity; - entry->vector = vector; - - /* Mask level triggered irqs. - * Use IRQ_DELAYED_DISABLE for edge triggered irqs. - */ - if (trigger) - entry->mask = 1; - return 0; -} - -static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, - int trigger, int polarity) -{ - struct irq_cfg *cfg; - struct IO_APIC_route_entry entry; - cpumask_t mask; - - if (!IO_APIC_IRQ(irq)) - return; - - cfg = irq_cfg(irq); - - mask = TARGET_CPUS; - if (assign_irq_vector(irq, mask)) - return; - - cpus_and(mask, cfg->domain, mask); - - apic_printk(APIC_VERBOSE,KERN_DEBUG - "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " - "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, - irq, trigger, polarity); - - - if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, - cpu_mask_to_apicid(mask), trigger, polarity, - cfg->vector)) { - printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", - mp_ioapics[apic].mp_apicid, pin); - __clear_irq_vector(irq); - return; - } - - ioapic_register_intr(irq, trigger); - if (irq < 16) - disable_8259A_irq(irq); - - ioapic_write_entry(apic, pin, entry); -} - -static void __init setup_IO_APIC_irqs(void) -{ - int apic, pin, idx, irq, first_notcon = 1; - - apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - - idx = find_irq_entry(apic,pin,mp_INT); - if (idx == -1) { - if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mp_apicid, pin); - first_notcon = 0; - } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mp_apicid, pin); - continue; - } - if (!first_notcon) { - apic_printk(APIC_VERBOSE, " not connected.\n"); - first_notcon = 1; - } - - irq = pin_2_irq(idx, apic, pin); -#ifdef CONFIG_X86_32 - if (multi_timer_check(apic, irq)) - continue; -#endif - add_pin_to_irq(irq, apic, pin); - - setup_IO_APIC_irq(apic, pin, irq, - irq_trigger(idx), irq_polarity(idx)); - } - } - - if (!first_notcon) - apic_printk(APIC_VERBOSE, " not connected.\n"); -} - -/* - * Set up the timer pin, possibly with the 8259A-master behind. - */ -static void __init setup_timer_IRQ0_pin(unsigned int apic, unsigned int pin, - int vector) -{ - struct IO_APIC_route_entry entry; - -#ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) - return; -#endif - - memset(&entry, 0, sizeof(entry)); - - /* - * We use logical delivery to get the timer IRQ - * to the first CPU. - */ - entry.dest_mode = INT_DEST_MODE; - entry.mask = 1; /* mask IRQ now */ - entry.dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.delivery_mode = INT_DELIVERY_MODE; - entry.polarity = 0; - entry.trigger = 0; - entry.vector = vector; - - /* - * The timer IRQ doesn't have to know that behind the - * scene we may have a 8259A-master in AEOI mode ... - */ - set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(apic, pin, entry); -} - - -__apicdebuginit(void) print_IO_APIC(void) -{ - int apic, i; - union IO_APIC_reg_00 reg_00; - union IO_APIC_reg_01 reg_01; - union IO_APIC_reg_02 reg_02; - union IO_APIC_reg_03 reg_03; - unsigned long flags; - struct irq_cfg *cfg; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); - for (i = 0; i < nr_ioapics; i++) - printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); - - /* - * We are a bit conservative about what we expect. We have to - * know about every hardware change ASAP. - */ - printk(KERN_INFO "testing the IO APIC.......................\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - reg_01.raw = io_apic_read(apic, 1); - if (reg_01.bits.version >= 0x10) - reg_02.raw = io_apic_read(apic, 2); - if (reg_01.bits.version >= 0x20) - reg_03.raw = io_apic_read(apic, 3); - spin_unlock_irqrestore(&ioapic_lock, flags); - - printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); - printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); - printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); - printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); - printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); - - printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); - printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); - - printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); - printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); - - /* - * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, - * but the value of reg_02 is read as the previous read register - * value, so ignore it if reg_02 == reg_01. - */ - if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { - printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); - printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); - } - - /* - * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 - * or reg_03, but the value of reg_0[23] is read as the previous read - * register value, so ignore it if reg_03 == reg_0[12]. - */ - if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && - reg_03.raw != reg_01.raw) { - printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); - printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); - } - - printk(KERN_DEBUG ".... IRQ redirection table:\n"); - - printk(KERN_DEBUG " NR Dst Mask Trig IRR Pol" - " Stat Dmod Deli Vect: \n"); - - for (i = 0; i <= reg_01.bits.entries; i++) { - struct IO_APIC_route_entry entry; - - entry = ioapic_read_entry(apic, i); - - printk(KERN_DEBUG " %02x %03X ", - i, - entry.dest - ); - - printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", - entry.mask, - entry.trigger, - entry.irr, - entry.polarity, - entry.delivery_status, - entry.dest_mode, - entry.delivery_mode, - entry.vector - ); - } - } - printk(KERN_DEBUG "IRQ to pin mappings:\n"); - for_each_irq_cfg(cfg) { - struct irq_pin_list *entry = cfg->irq_2_pin; - if (!entry) - continue; - printk(KERN_DEBUG "IRQ%d ", cfg->irq); - for (;;) { - printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = entry->next; - } - printk("\n"); - } - - printk(KERN_INFO ".................................... done.\n"); - - return; -} - -__apicdebuginit(void) print_APIC_bitfield(int base) -{ - unsigned int v; - int i, j; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1<<j)) - printk("1"); - else - printk("0"); - } - printk("\n"); - } -} - -__apicdebuginit(void) print_local_APIC(void *dummy) -{ - unsigned int v, ver, maxlvt; - u64 icr; - - if (apic_verbosity == APIC_QUIET) - return; - - printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", - smp_processor_id(), hard_smp_processor_id()); - v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, read_apic_id()); - v = apic_read(APIC_LVR); - printk(KERN_INFO "... APIC VERSION: %08x\n", v); - ver = GET_APIC_VERSION(v); - maxlvt = lapic_get_maxlvt(); - - v = apic_read(APIC_TASKPRI); - printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); - - if (APIC_INTEGRATED(ver)) { /* !82489DX */ - v = apic_read(APIC_ARBPRI); - printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, - v & APIC_ARBPRI_MASK); - v = apic_read(APIC_PROCPRI); - printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); - } - - v = apic_read(APIC_EOI); - printk(KERN_DEBUG "... APIC EOI: %08x\n", v); - v = apic_read(APIC_RRR); - printk(KERN_DEBUG "... APIC RRR: %08x\n", v); - v = apic_read(APIC_LDR); - printk(KERN_DEBUG "... APIC LDR: %08x\n", v); - v = apic_read(APIC_DFR); - printk(KERN_DEBUG "... APIC DFR: %08x\n", v); - v = apic_read(APIC_SPIV); - printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); - - printk(KERN_DEBUG "... APIC ISR field:\n"); - print_APIC_bitfield(APIC_ISR); - printk(KERN_DEBUG "... APIC TMR field:\n"); - print_APIC_bitfield(APIC_TMR); - printk(KERN_DEBUG "... APIC IRR field:\n"); - print_APIC_bitfield(APIC_IRR); - - if (APIC_INTEGRATED(ver)) { /* !82489DX */ - if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ - apic_write(APIC_ESR, 0); - - v = apic_read(APIC_ESR); - printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - } - - icr = apic_icr_read(); - printk(KERN_DEBUG "... APIC ICR: %08x\n", icr); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", icr >> 32); - - v = apic_read(APIC_LVTT); - printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); - - if (maxlvt > 3) { /* PC is LVT#4. */ - v = apic_read(APIC_LVTPC); - printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); - } - v = apic_read(APIC_LVT0); - printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); - v = apic_read(APIC_LVT1); - printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); - - if (maxlvt > 2) { /* ERR is LVT#3. */ - v = apic_read(APIC_LVTERR); - printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); - } - - v = apic_read(APIC_TMICT); - printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); - v = apic_read(APIC_TMCCT); - printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); - v = apic_read(APIC_TDCR); - printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); - printk("\n"); -} - -__apicdebuginit(void) print_all_local_APICs(void) -{ - on_each_cpu(print_local_APIC, NULL, 1); -} - -__apicdebuginit(void) print_PIC(void) -{ - unsigned int v; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "\nprinting PIC contents\n"); - - spin_lock_irqsave(&i8259A_lock, flags); - - v = inb(0xa1) << 8 | inb(0x21); - printk(KERN_DEBUG "... PIC IMR: %04x\n", v); - - v = inb(0xa0) << 8 | inb(0x20); - printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - - outb(0x0b,0xa0); - outb(0x0b,0x20); - v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); - - spin_unlock_irqrestore(&i8259A_lock, flags); - - printk(KERN_DEBUG "... PIC ISR: %04x\n", v); - - v = inb(0x4d1) << 8 | inb(0x4d0); - printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); -} - -__apicdebuginit(int) print_all_ICs(void) -{ - print_PIC(); - print_all_local_APICs(); - print_IO_APIC(); - - return 0; -} - -fs_initcall(print_all_ICs); - - -/* Where if anywhere is the i8259 connect in external int mode */ -static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; - -void __init enable_IO_APIC(void) -{ - union IO_APIC_reg_01 reg_01; - int i8259_apic, i8259_pin; - int apic; - unsigned long flags; - -#ifdef CONFIG_X86_32 - int i; - if (!pirqs_enabled) - for (i = 0; i < MAX_PIRQS; i++) - pirq_entries[i] = -1; -#endif - - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } - for(apic = 0; apic < nr_ioapics; apic++) { - int pin; - /* See if any of the pins is in ExtINT mode */ - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - struct IO_APIC_route_entry entry; - entry = ioapic_read_entry(apic, pin); - - /* If the interrupt line is enabled and in ExtInt mode - * I have found the pin where the i8259 is connected. - */ - if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { - ioapic_i8259.apic = apic; - ioapic_i8259.pin = pin; - goto found_i8259; - } - } - } - found_i8259: - /* Look to see what if the MP table has reported the ExtINT */ - /* If we could not find the appropriate pin by looking at the ioapic - * the i8259 probably is not connected the ioapic but give the - * mptable a chance anyway. - */ - i8259_pin = find_isa_irq_pin(0, mp_ExtINT); - i8259_apic = find_isa_irq_apic(0, mp_ExtINT); - /* Trust the MP table if nothing is setup in the hardware */ - if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { - printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); - ioapic_i8259.pin = i8259_pin; - ioapic_i8259.apic = i8259_apic; - } - /* Complain if the MP table and the hardware disagree */ - if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && - (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) - { - printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); - } - - /* - * Do not trust the IO-APIC being empty at bootup - */ - clear_IO_APIC(); -} - -/* - * Not an __init, needed by the reboot code - */ -void disable_IO_APIC(void) -{ - /* - * Clear the IO-APIC before rebooting: - */ - clear_IO_APIC(); - - /* - * If the i8259 is routed through an IOAPIC - * Put that IOAPIC in virtual wire mode - * so legacy interrupts can be delivered. - */ - if (ioapic_i8259.pin != -1) { - struct IO_APIC_route_entry entry; - - memset(&entry, 0, sizeof(entry)); - entry.mask = 0; /* Enabled */ - entry.trigger = 0; /* Edge */ - entry.irr = 0; - entry.polarity = 0; /* High */ - entry.delivery_status = 0; - entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = dest_ExtINT; /* ExtInt */ - entry.vector = 0; - entry.dest = read_apic_id(); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); - } - - disconnect_bsp_APIC(ioapic_i8259.pin != -1); -} - -#ifdef CONFIG_X86_32 -/* - * function to set the IO-APIC physical IDs based on the - * values stored in the MPC table. - * - * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 - */ - -static void __init setup_ioapic_ids_from_mpc(void) -{ - union IO_APIC_reg_00 reg_00; - physid_mask_t phys_id_present_map; - int apic; - int i; - unsigned char old_id; - unsigned long flags; - - if (x86_quirks->setup_ioapic_ids && x86_quirks->setup_ioapic_ids()) - return; - - /* - * Don't check I/O APIC IDs for xAPIC systems. They have - * no meaning without the serial APIC bus. - */ - if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) - || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) - return; - /* - * This is broken; anything with a real cpu count has to - * circumvent this idiocy regardless. - */ - phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); - - /* - * Set the IOAPIC ID to the value stored in the MPC table. - */ - for (apic = 0; apic < nr_ioapics; apic++) { - - /* Read the register 0 value */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mp_apicid; - - if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { - printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mp_apicid); - printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", - reg_00.bits.ID); - mp_ioapics[apic].mp_apicid = reg_00.bits.ID; - } - - /* - * Sanity check, is the ID really free? Every APIC in a - * system must have a unique ID or we get lots of nice - * 'stuck on smp_invalidate_needed IPI wait' messages. - */ - if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mp_apicid)) { - printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mp_apicid); - for (i = 0; i < get_physical_broadcast(); i++) - if (!physid_isset(i, phys_id_present_map)) - break; - if (i >= get_physical_broadcast()) - panic("Max APIC ID exceeded!\n"); - printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", - i); - physid_set(i, phys_id_present_map); - mp_ioapics[apic].mp_apicid = i; - } else { - physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); - apic_printk(APIC_VERBOSE, "Setting %d in the " - "phys_id_present_map\n", - mp_ioapics[apic].mp_apicid); - physids_or(phys_id_present_map, phys_id_present_map, tmp); - } - - - /* - * We need to adjust the IRQ routing table - * if the ID changed. - */ - if (old_id != mp_ioapics[apic].mp_apicid) - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_dstapic == old_id) - mp_irqs[i].mp_dstapic - = mp_ioapics[apic].mp_apicid; - - /* - * Read the right value from the MPC table and - * write it into the ID register. - */ - apic_printk(APIC_VERBOSE, KERN_INFO - "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mp_apicid); - - reg_00.bits.ID = mp_ioapics[apic].mp_apicid; - spin_lock_irqsave(&ioapic_lock, flags); - - /* - * Sanity check - */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) - printk("could not set ID!\n"); - else - apic_printk(APIC_VERBOSE, " ok.\n"); - } -} -#endif - -int no_timer_check __initdata; - -static int __init notimercheck(char *s) -{ - no_timer_check = 1; - return 1; -} -__setup("no_timer_check", notimercheck); - -/* - * There is a nasty bug in some older SMP boards, their mptable lies - * about the timer IRQ. We do the following to work around the situation: - * - * - timer IRQ defaults to IO-APIC IRQ - * - if this function detects that timer IRQs are defunct, then we fall - * back to ISA timer IRQs - */ -static int __init timer_irq_works(void) -{ - unsigned long t1 = jiffies; - unsigned long flags; - - if (no_timer_check) - return 1; - - local_save_flags(flags); - local_irq_enable(); - /* Let ten ticks pass... */ - mdelay((10 * 1000) / HZ); - local_irq_restore(flags); - - /* - * Expect a few ticks at least, to be sure some possible - * glue logic does not lock up after one or two first - * ticks in a non-ExtINT mode. Also the local APIC - * might have cached one ExtINT interrupt. Finally, at - * least one tick may be lost due to delays. - */ - - /* jiffies wrap? */ - if (time_after(jiffies, t1 + 4)) - return 1; - return 0; -} - -/* - * In the SMP+IOAPIC case it might happen that there are an unspecified - * number of pending IRQ events unhandled. These cases are very rare, - * so we 'resend' these IRQs via IPIs, to the same CPU. It's much - * better to do it this way as thus we do not have to be aware of - * 'pending' interrupts in the IRQ path, except at this point. - */ -/* - * Edge triggered needs to resend any interrupt - * that was delayed but this is now handled in the device - * independent code. - */ - -/* - * Starting up a edge-triggered IO-APIC interrupt is - * nasty - we need to make sure that we get the edge. - * If it is already asserted for some reason, we need - * return 1 to indicate that is was pending. - * - * This is not complete - we should be able to fake - * an edge even if it isn't on the 8259A... - */ - -static unsigned int startup_ioapic_irq(unsigned int irq) -{ - int was_pending = 0; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - if (irq < 16) { - disable_8259A_irq(irq); - if (i8259A_irq_pending(irq)) - was_pending = 1; - } - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return was_pending; -} - -#ifdef CONFIG_X86_64 -static int ioapic_retrigger_irq(unsigned int irq) -{ - - struct irq_cfg *cfg = irq_cfg(irq); - unsigned long flags; - - spin_lock_irqsave(&vector_lock, flags); - send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector); - spin_unlock_irqrestore(&vector_lock, flags); - - return 1; -} -#else -static int ioapic_retrigger_irq(unsigned int irq) -{ - send_IPI_self(irq_cfg(irq)->vector); - - return 1; -} -#endif - -/* - * Level and edge triggered IO-APIC interrupts need different handling, - * so we use two separate IRQ descriptors. Edge triggered IRQs can be - * handled with the level-triggered descriptor, but that one has slightly - * more overhead. Level-triggered interrupts cannot be handled with the - * edge-triggered handler, without risking IRQ storms and other ugly - * races. - */ - -#ifdef CONFIG_SMP - -#ifdef CONFIG_INTR_REMAP -static void ir_irq_migration(struct work_struct *work); - -static DECLARE_DELAYED_WORK(ir_migration_work, ir_irq_migration); - -/* - * Migrate the IO-APIC irq in the presence of intr-remapping. - * - * For edge triggered, irq migration is a simple atomic update(of vector - * and cpu destination) of IRTE and flush the hardware cache. - * - * For level triggered, we need to modify the io-apic RTE aswell with the update - * vector information, along with modifying IRTE with vector and destination. - * So irq migration for level triggered is little bit more complex compared to - * edge triggered migration. But the good news is, we use the same algorithm - * for level triggered migration as we have today, only difference being, - * we now initiate the irq migration from process context instead of the - * interrupt context. - * - * In future, when we do a directed EOI (combined with cpu EOI broadcast - * suppression) to the IO-APIC, level triggered irq migration will also be - * as simple as edge triggered migration and we can do the irq migration - * with a simple atomic update to IO-APIC RTE. - */ -static void migrate_ioapic_irq(int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - struct irq_desc *desc; - cpumask_t tmp, cleanup_mask; - struct irte irte; - int modify_ioapic_rte; - unsigned int dest; - unsigned long flags; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (get_irte(irq, &irte)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - desc = irq_to_desc(irq); - modify_ioapic_rte = desc->status & IRQ_LEVEL; - if (modify_ioapic_rte) { - spin_lock_irqsave(&ioapic_lock, flags); - __target_IO_APIC_irq(irq, dest, cfg->vector); - spin_unlock_irqrestore(&ioapic_lock, flags); - } - - irte.vector = cfg->vector; - irte.dest_id = IRTE_DEST(dest); - - /* - * Modified the IRTE and flushes the Interrupt entry cache. - */ - modify_irte(irq, &irte); - - if (cfg->move_in_progress) { - cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); - cfg->move_cleanup_count = cpus_weight(cleanup_mask); - send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - cfg->move_in_progress = 0; - } - - desc->affinity = mask; -} - -static int migrate_irq_remapped_level(int irq) -{ - int ret = -1; - struct irq_desc *desc = irq_to_desc(irq); - - mask_IO_APIC_irq(irq); - - if (io_apic_level_ack_pending(irq)) { - /* - * Interrupt in progress. Migrating irq now will change the - * vector information in the IO-APIC RTE and that will confuse - * the EOI broadcast performed by cpu. - * So, delay the irq migration to the next instance. - */ - schedule_delayed_work(&ir_migration_work, 1); - goto unmask; - } - - /* everthing is clear. we have right of way */ - migrate_ioapic_irq(irq, desc->pending_mask); - - ret = 0; - desc->status &= ~IRQ_MOVE_PENDING; - cpus_clear(desc->pending_mask); - -unmask: - unmask_IO_APIC_irq(irq); - return ret; -} - -static void ir_irq_migration(struct work_struct *work) -{ - unsigned int irq; - struct irq_desc *desc; - - for_each_irq_desc(irq, desc) { - if (desc->status & IRQ_MOVE_PENDING) { - unsigned long flags; - - spin_lock_irqsave(&desc->lock, flags); - if (!desc->chip->set_affinity || - !(desc->status & IRQ_MOVE_PENDING)) { - desc->status &= ~IRQ_MOVE_PENDING; - spin_unlock_irqrestore(&desc->lock, flags); - continue; - } - - desc->chip->set_affinity(irq, desc->pending_mask); - spin_unlock_irqrestore(&desc->lock, flags); - } - } -} - -/* - * Migrates the IRQ destination in the process context. - */ -static void set_ir_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - struct irq_desc *desc = irq_to_desc(irq); - - if (desc->status & IRQ_LEVEL) { - desc->status |= IRQ_MOVE_PENDING; - desc->pending_mask = mask; - migrate_irq_remapped_level(irq); - return; - } - - migrate_ioapic_irq(irq, mask); -} -#endif - -asmlinkage void smp_irq_move_cleanup_interrupt(void) -{ - unsigned vector, me; - ack_APIC_irq(); -#ifdef CONFIG_X86_64 - exit_idle(); -#endif - irq_enter(); - - me = smp_processor_id(); - for (vector = FIRST_EXTERNAL_VECTOR; vector < NR_VECTORS; vector++) { - unsigned int irq; - struct irq_desc *desc; - struct irq_cfg *cfg; - irq = __get_cpu_var(vector_irq)[vector]; - - desc = irq_to_desc(irq); - if (!desc) - continue; - - cfg = irq_cfg(irq); - spin_lock(&desc->lock); - if (!cfg->move_cleanup_count) - goto unlock; - - if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) - goto unlock; - - __get_cpu_var(vector_irq)[vector] = -1; - cfg->move_cleanup_count--; -unlock: - spin_unlock(&desc->lock); - } - - irq_exit(); -} - -static void irq_complete_move(unsigned int irq) -{ - struct irq_cfg *cfg = irq_cfg(irq); - unsigned vector, me; - - if (likely(!cfg->move_in_progress)) - return; - - vector = ~get_irq_regs()->orig_ax; - me = smp_processor_id(); - if ((vector == cfg->vector) && cpu_isset(me, cfg->domain)) { - cpumask_t cleanup_mask; - - cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); - cfg->move_cleanup_count = cpus_weight(cleanup_mask); - send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - cfg->move_in_progress = 0; - } -} -#else -static inline void irq_complete_move(unsigned int irq) {} -#endif -#ifdef CONFIG_INTR_REMAP -static void ack_x2apic_level(unsigned int irq) -{ - ack_x2APIC_irq(); -} - -static void ack_x2apic_edge(unsigned int irq) -{ - ack_x2APIC_irq(); -} -#endif - -static void ack_apic_edge(unsigned int irq) -{ - irq_complete_move(irq); - move_native_irq(irq); - ack_APIC_irq(); -} - -#ifdef CONFIG_X86_64 -static void ack_apic_level(unsigned int irq) -{ - int do_unmask_irq = 0; - - irq_complete_move(irq); -#ifdef CONFIG_GENERIC_PENDING_IRQ - /* If we are moving the irq we need to mask it */ - if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) { - do_unmask_irq = 1; - mask_IO_APIC_irq(irq); - } -#endif - - /* - * We must acknowledge the irq before we move it or the acknowledge will - * not propagate properly. - */ - ack_APIC_irq(); - - /* Now we can move and renable the irq */ - if (unlikely(do_unmask_irq)) { - /* Only migrate the irq if the ack has been received. - * - * On rare occasions the broadcast level triggered ack gets - * delayed going to ioapics, and if we reprogram the - * vector while Remote IRR is still set the irq will never - * fire again. - * - * To prevent this scenario we read the Remote IRR bit - * of the ioapic. This has two effects. - * - On any sane system the read of the ioapic will - * flush writes (and acks) going to the ioapic from - * this cpu. - * - We get to see if the ACK has actually been delivered. - * - * Based on failed experiments of reprogramming the - * ioapic entry from outside of irq context starting - * with masking the ioapic entry and then polling until - * Remote IRR was clear before reprogramming the - * ioapic I don't trust the Remote IRR bit to be - * completey accurate. - * - * However there appears to be no other way to plug - * this race, so if the Remote IRR bit is not - * accurate and is causing problems then it is a hardware bug - * and you can go talk to the chipset vendor about it. - */ - if (!io_apic_level_ack_pending(irq)) - move_masked_irq(irq); - unmask_IO_APIC_irq(irq); - } -} -#else -atomic_t irq_mis_count; -static void ack_apic_level(unsigned int irq) -{ - unsigned long v; - int i; - - irq_complete_move(irq); - move_native_irq(irq); - /* - * It appears there is an erratum which affects at least version 0x11 - * of I/O APIC (that's the 82093AA and cores integrated into various - * chipsets). Under certain conditions a level-triggered interrupt is - * erroneously delivered as edge-triggered one but the respective IRR - * bit gets set nevertheless. As a result the I/O unit expects an EOI - * message but it will never arrive and further interrupts are blocked - * from the source. The exact reason is so far unknown, but the - * phenomenon was observed when two consecutive interrupt requests - * from a given source get delivered to the same CPU and the source is - * temporarily disabled in between. - * - * A workaround is to simulate an EOI message manually. We achieve it - * by setting the trigger mode to edge and then to level when the edge - * trigger mode gets detected in the TMR of a local APIC for a - * level-triggered interrupt. We mask the source for the time of the - * operation to prevent an edge-triggered interrupt escaping meanwhile. - * The idea is from Manfred Spraul. --macro - */ - i = irq_cfg(irq)->vector; - - v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); - - ack_APIC_irq(); - - if (!(v & (1 << (i & 0x1f)))) { - atomic_inc(&irq_mis_count); - spin_lock(&ioapic_lock); - __mask_and_edge_IO_APIC_irq(irq); - __unmask_and_level_IO_APIC_irq(irq); - spin_unlock(&ioapic_lock); - } -} -#endif - -static struct irq_chip ioapic_chip __read_mostly = { - .name = "IO-APIC", - .startup = startup_ioapic_irq, - .mask = mask_IO_APIC_irq, - .unmask = unmask_IO_APIC_irq, - .ack = ack_apic_edge, - .eoi = ack_apic_level, -#ifdef CONFIG_SMP - .set_affinity = set_ioapic_affinity_irq, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -#ifdef CONFIG_INTR_REMAP -static struct irq_chip ir_ioapic_chip __read_mostly = { - .name = "IR-IO-APIC", - .startup = startup_ioapic_irq, - .mask = mask_IO_APIC_irq, - .unmask = unmask_IO_APIC_irq, - .ack = ack_x2apic_edge, - .eoi = ack_x2apic_level, -#ifdef CONFIG_SMP - .set_affinity = set_ir_ioapic_affinity_irq, -#endif - .retrigger = ioapic_retrigger_irq, -}; -#endif - -static inline void init_IO_APIC_traps(void) -{ - int irq; - struct irq_desc *desc; - struct irq_cfg *cfg; - - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - for_each_irq_cfg(cfg) { - irq = cfg->irq; - if (IO_APIC_IRQ(irq) && !cfg->vector) { - /* - * Hmm.. We don't have an entry for this, - * so default to an old-fashioned 8259 - * interrupt if we can.. - */ - if (irq < 16) - make_8259A_irq(irq); - else { - desc = irq_to_desc(irq); - /* Strange. Oh, well.. */ - desc->chip = &no_irq_chip; - } - } - } -} - -/* - * The local APIC irq-chip implementation: - */ - -static void mask_lapic_irq(unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v | APIC_LVT_MASKED); -} - -static void unmask_lapic_irq(unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); -} - -static void ack_lapic_irq (unsigned int irq) -{ - ack_APIC_irq(); -} - -static struct irq_chip lapic_chip __read_mostly = { - .name = "local-APIC", - .mask = mask_lapic_irq, - .unmask = unmask_lapic_irq, - .ack = ack_lapic_irq, -}; - -static void lapic_register_intr(int irq) -{ - struct irq_desc *desc; - - desc = irq_to_desc(irq); - desc->status &= ~IRQ_LEVEL; - set_irq_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, - "edge"); -} - -static void __init setup_nmi(void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); - - enable_NMI_through_LVT0(); - - apic_printk(APIC_VERBOSE, " done.\n"); -} - -/* - * This looks a bit hackish but it's about the only one way of sending - * a few INTA cycles to 8259As and any associated glue logic. ICR does - * not support the ExtINT mode, unfortunately. We need to send these - * cycles as some i82489DX-based boards have glue logic that keeps the - * 8259A interrupt line asserted until INTA. --macro - */ -static inline void __init unlock_ExtINT_logic(void) -{ - int apic, pin, i; - struct IO_APIC_route_entry entry0, entry1; - unsigned char save_control, save_freq_select; - - pin = find_isa_irq_pin(8, mp_INT); - if (pin == -1) { - WARN_ON_ONCE(1); - return; - } - apic = find_isa_irq_apic(8, mp_INT); - if (apic == -1) { - WARN_ON_ONCE(1); - return; - } - - entry0 = ioapic_read_entry(apic, pin); - clear_IO_APIC_pin(apic, pin); - - memset(&entry1, 0, sizeof(entry1)); - - entry1.dest_mode = 0; /* physical delivery */ - entry1.mask = 0; /* unmask IRQ now */ - entry1.dest = hard_smp_processor_id(); - entry1.delivery_mode = dest_ExtINT; - entry1.polarity = entry0.polarity; - entry1.trigger = 0; - entry1.vector = 0; - - ioapic_write_entry(apic, pin, entry1); - - save_control = CMOS_READ(RTC_CONTROL); - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, - RTC_FREQ_SELECT); - CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); - - i = 100; - while (i-- > 0) { - mdelay(10); - if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) - i -= 10; - } - - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(apic, pin); - - ioapic_write_entry(apic, pin, entry0); -} - -static int disable_timer_pin_1 __initdata; -/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ -static int __init disable_timer_pin_setup(char *arg) -{ - disable_timer_pin_1 = 1; - return 0; -} -early_param("disable_timer_pin_1", disable_timer_pin_setup); - -int timer_through_8259 __initdata; - -/* - * This code may look a bit paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - * - * FIXME: really need to revamp this for all platforms. - */ -static inline void __init check_timer(void) -{ - struct irq_cfg *cfg = irq_cfg(0); - int apic1, pin1, apic2, pin2; - unsigned long flags; - unsigned int ver; - int no_pin1 = 0; - - local_irq_save(flags); - - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - assign_irq_vector(0, TARGET_CPUS); - - /* - * As IRQ0 is to be enabled in the 8259A, the virtual - * wire has to be disabled in the local APIC. Also - * timer interrupts need to be acknowledged manually in - * the 8259A for the i82489DX when using the NMI - * watchdog as that APIC treats NMIs as level-triggered. - * The AEOI mode will finish them in the 8259A - * automatically. - */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - init_8259A(1); -#ifdef CONFIG_X86_32 - timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); -#endif - - pin1 = find_isa_irq_pin(0, mp_INT); - apic1 = find_isa_irq_apic(0, mp_INT); - pin2 = ioapic_i8259.pin; - apic2 = ioapic_i8259.apic; - - apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " - "apic1=%d pin1=%d apic2=%d pin2=%d\n", - cfg->vector, apic1, pin1, apic2, pin2); - - /* - * Some BIOS writers are clueless and report the ExtINTA - * I/O APIC input from the cascaded 8259A as the timer - * interrupt input. So just in case, if only one pin - * was found above, try it both directly and through the - * 8259A. - */ - if (pin1 == -1) { -#ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) - panic("BIOS bug: timer not connected to IO-APIC"); -#endif - pin1 = pin2; - apic1 = apic2; - no_pin1 = 1; - } else if (pin2 == -1) { - pin2 = pin1; - apic2 = apic1; - } - - if (pin1 != -1) { - /* - * Ok, does IRQ0 through the IOAPIC work? - */ - if (no_pin1) { - add_pin_to_irq(0, apic1, pin1); - setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); - } - unmask_IO_APIC_irq(0); - if (timer_irq_works()) { - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - enable_8259A_irq(0); - } - if (disable_timer_pin_1 > 0) - clear_IO_APIC_pin(0, pin1); - goto out; - } -#ifdef CONFIG_INTR_REMAP - if (intr_remapping_enabled) - panic("timer doesn't work through Interrupt-remapped IO-APIC"); -#endif - clear_IO_APIC_pin(apic1, pin1); - if (!no_pin1) - apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " - "8254 timer not connected to IO-APIC\n"); - - apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " - "(IRQ0) through the 8259A ...\n"); - apic_printk(APIC_QUIET, KERN_INFO - "..... (found apic %d pin %d) ...\n", apic2, pin2); - /* - * legacy devices should be connected to IO APIC #0 - */ - replace_pin_at_irq(0, apic1, pin1, apic2, pin2); - setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); - unmask_IO_APIC_irq(0); - enable_8259A_irq(0); - if (timer_irq_works()) { - apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); - timer_through_8259 = 1; - if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); - setup_nmi(); - enable_8259A_irq(0); - } - goto out; - } - /* - * Cleanup, just in case ... - */ - disable_8259A_irq(0); - clear_IO_APIC_pin(apic2, pin2); - apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); - } - - if (nmi_watchdog == NMI_IO_APIC) { - apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " - "through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = NMI_NONE; - } -#ifdef CONFIG_X86_32 - timer_ack = 0; -#endif - - apic_printk(APIC_QUIET, KERN_INFO - "...trying to set up timer as Virtual Wire IRQ...\n"); - - lapic_register_intr(0); - apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ - enable_8259A_irq(0); - - if (timer_irq_works()) { - apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); - goto out; - } - disable_8259A_irq(0); - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); - apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); - - apic_printk(APIC_QUIET, KERN_INFO - "...trying to set up timer as ExtINT IRQ...\n"); - - init_8259A(0); - make_8259A_irq(0); - apic_write(APIC_LVT0, APIC_DM_EXTINT); - - unlock_ExtINT_logic(); - - if (timer_irq_works()) { - apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); - goto out; - } - apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); - panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " - "report. Then try booting with the 'noapic' option.\n"); -out: - local_irq_restore(flags); -} - -/* - * Traditionally ISA IRQ2 is the cascade IRQ, and is not available - * to devices. However there may be an I/O APIC pin available for - * this interrupt regardless. The pin may be left unconnected, but - * typically it will be reused as an ExtINT cascade interrupt for - * the master 8259A. In the MPS case such a pin will normally be - * reported as an ExtINT interrupt in the MP table. With ACPI - * there is no provision for ExtINT interrupts, and in the absence - * of an override it would be treated as an ordinary ISA I/O APIC - * interrupt, that is edge-triggered and unmasked by default. We - * used to do this, but it caused problems on some systems because - * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using - * the same ExtINT cascade interrupt to drive the local APIC of the - * bootstrap processor. Therefore we refrain from routing IRQ2 to - * the I/O APIC in all cases now. No actual device should request - * it anyway. --macro - */ -#define PIC_IRQS (1 << PIC_CASCADE_IR) - -void __init setup_IO_APIC(void) -{ - -#ifdef CONFIG_X86_32 - enable_IO_APIC(); -#else - /* - * calling enable_IO_APIC() is moved to setup_local_APIC for BP - */ -#endif - - io_apic_irqs = ~PIC_IRQS; - - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - /* - * Set up IO-APIC IRQ routing. - */ -#ifdef CONFIG_X86_32 - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); -#endif - sync_Arb_IDs(); - setup_IO_APIC_irqs(); - init_IO_APIC_traps(); - check_timer(); -} - -/* - * Called after all the initialization is done. If we didnt find any - * APIC bugs then we can allow the modify fast path - */ - -static int __init io_apic_bug_finalize(void) -{ - if (sis_apic_bug == -1) - sis_apic_bug = 0; - return 0; -} - -late_initcall(io_apic_bug_finalize); - -struct sysfs_ioapic_data { - struct sys_device dev; - struct IO_APIC_route_entry entry[0]; -}; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; - -static int ioapic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) - *entry = ioapic_read_entry(dev->id, i); - - return 0; -} - -static int ioapic_resume(struct sys_device *dev) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - unsigned long flags; - union IO_APIC_reg_00 reg_00; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; - io_apic_write(dev->id, 0, reg_00.raw); - } - spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i++) - ioapic_write_entry(dev->id, i, entry[i]); - - return 0; -} - -static struct sysdev_class ioapic_sysdev_class = { - .name = "ioapic", - .suspend = ioapic_suspend, - .resume = ioapic_resume, -}; - -static int __init ioapic_init_sysfs(void) -{ - struct sys_device * dev; - int i, size, error; - - error = sysdev_class_register(&ioapic_sysdev_class); - if (error) - return error; - - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] - * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kzalloc(size, GFP_KERNEL); - if (!mp_ioapic_data[i]) { - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - dev = &mp_ioapic_data[i]->dev; - dev->id = i; - dev->cls = &ioapic_sysdev_class; - error = sysdev_register(dev); - if (error) { - kfree(mp_ioapic_data[i]); - mp_ioapic_data[i] = NULL; - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - } - - return 0; -} - -device_initcall(ioapic_init_sysfs); - -/* - * Dynamic irq allocate and deallocation - */ -unsigned int create_irq_nr(unsigned int irq_want) -{ - /* Allocate an unused irq */ - unsigned int irq; - unsigned int new; - unsigned long flags; - struct irq_cfg *cfg_new; - -#ifndef CONFIG_HAVE_SPARSE_IRQ - irq_want = nr_irqs - 1; -#endif - - irq = 0; - spin_lock_irqsave(&vector_lock, flags); - for (new = irq_want; new > 0; new--) { - if (platform_legacy_irq(new)) - continue; - cfg_new = irq_cfg(new); - if (cfg_new && cfg_new->vector != 0) - continue; - /* check if need to create one */ - if (!cfg_new) - cfg_new = irq_cfg_alloc(new); - if (__assign_irq_vector(new, TARGET_CPUS) == 0) - irq = new; - break; - } - spin_unlock_irqrestore(&vector_lock, flags); - - if (irq > 0) { - dynamic_irq_init(irq); - } - return irq; -} - -int create_irq(void) -{ - int irq; - - irq = create_irq_nr(nr_irqs - 1); - - if (irq == 0) - irq = -1; - - return irq; -} - -void destroy_irq(unsigned int irq) -{ - unsigned long flags; - - dynamic_irq_cleanup(irq); - -#ifdef CONFIG_INTR_REMAP - free_irte(irq); -#endif - spin_lock_irqsave(&vector_lock, flags); - __clear_irq_vector(irq); - spin_unlock_irqrestore(&vector_lock, flags); -} - -/* - * MSI message composition - */ -#ifdef CONFIG_PCI_MSI -static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) -{ - struct irq_cfg *cfg; - int err; - unsigned dest; - cpumask_t tmp; - - tmp = TARGET_CPUS; - err = assign_irq_vector(irq, tmp); - if (err) - return err; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); - -#ifdef CONFIG_INTR_REMAP - if (irq_remapped(irq)) { - struct irte irte; - int ir_index; - u16 sub_handle; - - ir_index = map_irq_to_irte_handle(irq, &sub_handle); - BUG_ON(ir_index == -1); - - memset (&irte, 0, sizeof(irte)); - - irte.present = 1; - irte.dst_mode = INT_DEST_MODE; - irte.trigger_mode = 0; /* edge */ - irte.dlvry_mode = INT_DELIVERY_MODE; - irte.vector = cfg->vector; - irte.dest_id = IRTE_DEST(dest); - - modify_irte(irq, &irte); - - msg->address_hi = MSI_ADDR_BASE_HI; - msg->data = sub_handle; - msg->address_lo = MSI_ADDR_BASE_LO | MSI_ADDR_IR_EXT_INT | - MSI_ADDR_IR_SHV | - MSI_ADDR_IR_INDEX1(ir_index) | - MSI_ADDR_IR_INDEX2(ir_index); - } else -#endif - { - msg->address_hi = MSI_ADDR_BASE_HI; - msg->address_lo = - MSI_ADDR_BASE_LO | - ((INT_DEST_MODE == 0) ? - MSI_ADDR_DEST_MODE_PHYSICAL: - MSI_ADDR_DEST_MODE_LOGICAL) | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_ADDR_REDIRECTION_CPU: - MSI_ADDR_REDIRECTION_LOWPRI) | - MSI_ADDR_DEST_ID(dest); - - msg->data = - MSI_DATA_TRIGGER_EDGE | - MSI_DATA_LEVEL_ASSERT | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - MSI_DATA_DELIVERY_FIXED: - MSI_DATA_DELIVERY_LOWPRI) | - MSI_DATA_VECTOR(cfg->vector); - } - return err; -} - -#ifdef CONFIG_SMP -static void set_msi_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - struct msi_msg msg; - unsigned int dest; - cpumask_t tmp; - struct irq_desc *desc; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - read_msi_msg(irq, &msg); - - msg.data &= ~MSI_DATA_VECTOR_MASK; - msg.data |= MSI_DATA_VECTOR(cfg->vector); - msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; - msg.address_lo |= MSI_ADDR_DEST_ID(dest); - - write_msi_msg(irq, &msg); - desc = irq_to_desc(irq); - desc->affinity = mask; -} - -#ifdef CONFIG_INTR_REMAP -/* - * Migrate the MSI irq to another cpumask. This migration is - * done in the process context using interrupt-remapping hardware. - */ -static void ir_set_msi_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - unsigned int dest; - cpumask_t tmp, cleanup_mask; - struct irte irte; - struct irq_desc *desc; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (get_irte(irq, &irte)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - irte.vector = cfg->vector; - irte.dest_id = IRTE_DEST(dest); - - /* - * atomically update the IRTE with the new destination and vector. - */ - modify_irte(irq, &irte); - - /* - * After this point, all the interrupts will start arriving - * at the new destination. So, time to cleanup the previous - * vector allocation. - */ - if (cfg->move_in_progress) { - cpus_and(cleanup_mask, cfg->old_domain, cpu_online_map); - cfg->move_cleanup_count = cpus_weight(cleanup_mask); - send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR); - cfg->move_in_progress = 0; - } - - desc = irq_to_desc(irq); - desc->affinity = mask; -} -#endif -#endif /* CONFIG_SMP */ - -/* - * IRQ Chip for MSI PCI/PCI-X/PCI-Express Devices, - * which implement the MSI or MSI-X Capability Structure. - */ -static struct irq_chip msi_chip = { - .name = "PCI-MSI", - .unmask = unmask_msi_irq, - .mask = mask_msi_irq, - .ack = ack_apic_edge, -#ifdef CONFIG_SMP - .set_affinity = set_msi_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -#ifdef CONFIG_INTR_REMAP -static struct irq_chip msi_ir_chip = { - .name = "IR-PCI-MSI", - .unmask = unmask_msi_irq, - .mask = mask_msi_irq, - .ack = ack_x2apic_edge, -#ifdef CONFIG_SMP - .set_affinity = ir_set_msi_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -/* - * Map the PCI dev to the corresponding remapping hardware unit - * and allocate 'nvec' consecutive interrupt-remapping table entries - * in it. - */ -static int msi_alloc_irte(struct pci_dev *dev, int irq, int nvec) -{ - struct intel_iommu *iommu; - int index; - - iommu = map_dev_to_ir(dev); - if (!iommu) { - printk(KERN_ERR - "Unable to map PCI %s to iommu\n", pci_name(dev)); - return -ENOENT; - } - - index = alloc_irte(iommu, irq, nvec); - if (index < 0) { - printk(KERN_ERR - "Unable to allocate %d IRTE for PCI %s\n", nvec, - pci_name(dev)); - return -ENOSPC; - } - return index; -} -#endif - -static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc, int irq) -{ - int ret; - struct msi_msg msg; - - ret = msi_compose_msg(dev, irq, &msg); - if (ret < 0) - return ret; - - set_irq_msi(irq, desc); - write_msi_msg(irq, &msg); - -#ifdef CONFIG_INTR_REMAP - if (irq_remapped(irq)) { - struct irq_desc *desc = irq_to_desc(irq); - /* - * irq migration in process context - */ - desc->status |= IRQ_MOVE_PCNTXT; - set_irq_chip_and_handler_name(irq, &msi_ir_chip, handle_edge_irq, "edge"); - } else -#endif - set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); - - return 0; -} - -static unsigned int build_irq_for_pci_dev(struct pci_dev *dev) -{ - unsigned int irq; - - irq = dev->bus->number; - irq <<= 8; - irq |= dev->devfn; - irq <<= 12; - - return irq; -} - -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) -{ - unsigned int irq; - int ret; - unsigned int irq_want; - - irq_want = build_irq_for_pci_dev(dev) + 0x100; - - irq = create_irq_nr(irq_want); - if (irq == 0) - return -1; - -#ifdef CONFIG_INTR_REMAP - if (!intr_remapping_enabled) - goto no_ir; - - ret = msi_alloc_irte(dev, irq, 1); - if (ret < 0) - goto error; -no_ir: -#endif - ret = setup_msi_irq(dev, desc, irq); - if (ret < 0) { - destroy_irq(irq); - return ret; - } - return 0; - -#ifdef CONFIG_INTR_REMAP -error: - destroy_irq(irq); - return ret; -#endif -} - -int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) -{ - unsigned int irq; - int ret, sub_handle; - struct msi_desc *desc; - unsigned int irq_want; - -#ifdef CONFIG_INTR_REMAP - struct intel_iommu *iommu = 0; - int index = 0; -#endif - - irq_want = build_irq_for_pci_dev(dev) + 0x100; - sub_handle = 0; - list_for_each_entry(desc, &dev->msi_list, list) { - irq = create_irq_nr(irq_want--); - if (irq == 0) - return -1; -#ifdef CONFIG_INTR_REMAP - if (!intr_remapping_enabled) - goto no_ir; - - if (!sub_handle) { - /* - * allocate the consecutive block of IRTE's - * for 'nvec' - */ - index = msi_alloc_irte(dev, irq, nvec); - if (index < 0) { - ret = index; - goto error; - } - } else { - iommu = map_dev_to_ir(dev); - if (!iommu) { - ret = -ENOENT; - goto error; - } - /* - * setup the mapping between the irq and the IRTE - * base index, the sub_handle pointing to the - * appropriate interrupt remap table entry. - */ - set_irte_irq(irq, iommu, index, sub_handle); - } -no_ir: -#endif - ret = setup_msi_irq(dev, desc, irq); - if (ret < 0) - goto error; - sub_handle++; - } - return 0; - -error: - destroy_irq(irq); - return ret; -} - -void arch_teardown_msi_irq(unsigned int irq) -{ - destroy_irq(irq); -} - -#ifdef CONFIG_DMAR -#ifdef CONFIG_SMP -static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - struct msi_msg msg; - unsigned int dest; - cpumask_t tmp; - struct irq_desc *desc; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - dmar_msi_read(irq, &msg); - - msg.data &= ~MSI_DATA_VECTOR_MASK; - msg.data |= MSI_DATA_VECTOR(cfg->vector); - msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; - msg.address_lo |= MSI_ADDR_DEST_ID(dest); - - dmar_msi_write(irq, &msg); - desc = irq_to_desc(irq); - desc->affinity = mask; -} -#endif /* CONFIG_SMP */ - -struct irq_chip dmar_msi_type = { - .name = "DMAR_MSI", - .unmask = dmar_msi_unmask, - .mask = dmar_msi_mask, - .ack = ack_apic_edge, -#ifdef CONFIG_SMP - .set_affinity = dmar_msi_set_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_dmar_msi(unsigned int irq) -{ - int ret; - struct msi_msg msg; - - ret = msi_compose_msg(NULL, irq, &msg); - if (ret < 0) - return ret; - dmar_msi_write(irq, &msg); - set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq, - "edge"); - return 0; -} -#endif - -#endif /* CONFIG_PCI_MSI */ -/* - * Hypertransport interrupt support - */ -#ifdef CONFIG_HT_IRQ - -#ifdef CONFIG_SMP - -static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) -{ - struct ht_irq_msg msg; - fetch_ht_irq_msg(irq, &msg); - - msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); - msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); - - msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); - msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); - - write_ht_irq_msg(irq, &msg); -} - -static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) -{ - struct irq_cfg *cfg; - unsigned int dest; - cpumask_t tmp; - struct irq_desc *desc; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - return; - - if (assign_irq_vector(irq, mask)) - return; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, mask); - dest = cpu_mask_to_apicid(tmp); - - target_ht_irq(irq, dest, cfg->vector); - desc = irq_to_desc(irq); - desc->affinity = mask; -} -#endif - -static struct irq_chip ht_irq_chip = { - .name = "PCI-HT", - .mask = mask_ht_irq, - .unmask = unmask_ht_irq, - .ack = ack_apic_edge, -#ifdef CONFIG_SMP - .set_affinity = set_ht_irq_affinity, -#endif - .retrigger = ioapic_retrigger_irq, -}; - -int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) -{ - struct irq_cfg *cfg; - int err; - cpumask_t tmp; - - tmp = TARGET_CPUS; - err = assign_irq_vector(irq, tmp); - if (!err) { - struct ht_irq_msg msg; - unsigned dest; - - cfg = irq_cfg(irq); - cpus_and(tmp, cfg->domain, tmp); - dest = cpu_mask_to_apicid(tmp); - - msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); - - msg.address_lo = - HT_IRQ_LOW_BASE | - HT_IRQ_LOW_DEST_ID(dest) | - HT_IRQ_LOW_VECTOR(cfg->vector) | - ((INT_DEST_MODE == 0) ? - HT_IRQ_LOW_DM_PHYSICAL : - HT_IRQ_LOW_DM_LOGICAL) | - HT_IRQ_LOW_RQEOI_EDGE | - ((INT_DELIVERY_MODE != dest_LowestPrio) ? - HT_IRQ_LOW_MT_FIXED : - HT_IRQ_LOW_MT_ARBITRATED) | - HT_IRQ_LOW_IRQ_MASKED; - - write_ht_irq_msg(irq, &msg); - - set_irq_chip_and_handler_name(irq, &ht_irq_chip, - handle_edge_irq, "edge"); - } - return err; -} -#endif /* CONFIG_HT_IRQ */ - -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#ifdef CONFIG_X86_32 -int __init io_apic_get_unique_id(int ioapic, int apic_id) -{ - union IO_APIC_reg_00 reg_00; - static physid_mask_t apic_id_map = PHYSID_MASK_NONE; - physid_mask_t tmp; - unsigned long flags; - int i = 0; - - /* - * The P4 platform supports up to 256 APIC IDs on two separate APIC - * buses (one for LAPICs, one for IOAPICs), where predecessors only - * supports up to 16 on one shared APIC bus. - * - * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full - * advantage of new APIC bus architecture. - */ - - if (physids_empty(apic_id_map)) - apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - if (apic_id >= get_physical_broadcast()) { - printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " - "%d\n", ioapic, apic_id, reg_00.bits.ID); - apic_id = reg_00.bits.ID; - } - - /* - * Every APIC in a system must have a unique ID or we get lots of nice - * 'stuck on smp_invalidate_needed IPI wait' messages. - */ - if (check_apicid_used(apic_id_map, apic_id)) { - - for (i = 0; i < get_physical_broadcast(); i++) { - if (!check_apicid_used(apic_id_map, i)) - break; - } - - if (i == get_physical_broadcast()) - panic("Max apic_id exceeded!\n"); - - printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " - "trying %d\n", ioapic, apic_id, i); - - apic_id = i; - } - - tmp = apicid_to_cpu_present(apic_id); - physids_or(apic_id_map, apic_id_map, tmp); - - if (reg_00.bits.ID != apic_id) { - reg_00.bits.ID = apic_id; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(ioapic, 0, reg_00.raw); - reg_00.raw = io_apic_read(ioapic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* Sanity check */ - if (reg_00.bits.ID != apic_id) { - printk("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); - return -1; - } - } - - apic_printk(APIC_VERBOSE, KERN_INFO - "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); - - return apic_id; -} - -int __init io_apic_get_version(int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.version; -} -#endif - -int __init io_apic_get_redir_entries (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.entries; -} - - -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) -{ - if (!IO_APIC_IRQ(irq)) { - apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= 16) - add_pin_to_irq(irq, ioapic, pin); - - setup_IO_APIC_irq(ioapic, pin, irq, triggering, polarity); - - return 0; -} - - -int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) -{ - int i; - - if (skip_ioapic_setup) - return -1; - - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_irqtype == mp_INT && - mp_irqs[i].mp_srcbusirq == bus_irq) - break; - if (i >= mp_irq_entries) - return -1; - - *trigger = irq_trigger(i); - *polarity = irq_polarity(i); - return 0; -} - -#endif /* CONFIG_ACPI */ - -/* - * This function currently is only a helper for the i386 smp boot process where - * we need to reprogram the ioredtbls to cater for the cpus which have come online - * so mask in all cases should simply be TARGET_CPUS - */ -#ifdef CONFIG_SMP -void __init setup_ioapic_dest(void) -{ - int pin, ioapic, irq, irq_entry; - struct irq_cfg *cfg; - - if (skip_ioapic_setup == 1) - return; - - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - - /* setup_IO_APIC_irqs could fail to get vector for some device - * when you have too many devices, because at that time only boot - * cpu is online. - */ - cfg = irq_cfg(irq); - if (!cfg->vector) - setup_IO_APIC_irq(ioapic, pin, irq, - irq_trigger(irq_entry), - irq_polarity(irq_entry)); -#ifdef CONFIG_INTR_REMAP - else if (intr_remapping_enabled) - set_ir_ioapic_affinity_irq(irq, TARGET_CPUS); -#endif - else - set_ioapic_affinity_irq(irq, TARGET_CPUS); - } - - } -} -#endif - -#ifdef CONFIG_X86_64 -#define IOAPIC_RESOURCE_NAME_SIZE 11 - -static struct resource *ioapic_resources; - -static struct resource * __init ioapic_setup_resources(void) -{ - unsigned long n; - struct resource *res; - char *mem; - int i; - - if (nr_ioapics <= 0) - return NULL; - - n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); - n *= nr_ioapics; - - mem = alloc_bootmem(n); - res = (void *)mem; - - if (mem != NULL) { - mem += sizeof(struct resource) * nr_ioapics; - - for (i = 0; i < nr_ioapics; i++) { - res[i].name = mem; - res[i].flags = IORESOURCE_MEM | IORESOURCE_BUSY; - sprintf(mem, "IOAPIC %u", i); - mem += IOAPIC_RESOURCE_NAME_SIZE; - } - } - - ioapic_resources = res; - - return res; -} -#endif - -void __init ioapic_init_mappings(void) -{ - unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; - int i; -#ifdef CONFIG_X86_64 - struct resource *ioapic_res; - - ioapic_res = ioapic_setup_resources(); -#endif - for (i = 0; i < nr_ioapics; i++) { - if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mp_apicaddr; -#ifdef CONFIG_X86_32 - if (!ioapic_phys) { - printk(KERN_ERR - "WARNING: bogus zero IO-APIC " - "address found in MPTABLE, " - "disabling IO/APIC support!\n"); - smp_found_config = 0; - skip_ioapic_setup = 1; - goto fake_ioapic_page; - } -#endif - } else { -#ifdef CONFIG_X86_32 -fake_ioapic_page: -#endif - ioapic_phys = (unsigned long) - alloc_bootmem_pages(PAGE_SIZE); - ioapic_phys = __pa(ioapic_phys); - } - set_fixmap_nocache(idx, ioapic_phys); - apic_printk(APIC_VERBOSE, - "mapped IOAPIC to %08lx (%08lx)\n", - __fix_to_virt(idx), ioapic_phys); - idx++; - -#ifdef CONFIG_X86_64 - if (ioapic_res != NULL) { - ioapic_res->start = ioapic_phys; - ioapic_res->end = ioapic_phys + (4 * 1024) - 1; - ioapic_res++; - } -#endif - } -} - -#ifdef CONFIG_X86_64 -static int __init ioapic_insert_resources(void) -{ - int i; - struct resource *r = ioapic_resources; - - if (!r) { - printk(KERN_ERR - "IO APIC resources could be not be allocated.\n"); - return -1; - } - - for (i = 0; i < nr_ioapics; i++) { - insert_resource(&iomem_resource, r); - r++; - } - - return 0; -} - -/* Insert the IO APIC resources after PCI initialization has occured to handle - * IO APICS that are mapped in on a BAR in PCI space. */ -late_initcall(ioapic_insert_resources); -#endif |