Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/pm-part2

22 files changed, 763 insertions, 141 deletions

diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 1a45d6bd253..88fa9494d5e 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -548,16 +548,16 @@ static struct clk mcasp1_fck = {
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk smartreflex0_fck = {
-	.name		= "smartreflex0_fck",
+static struct clk smartreflex_mpu_fck = {
+	.name		= "smartreflex_mpu_fck",
 	.clkdm_name	= "l4_wkup_clkdm",
 	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
 	.recalc		= &followparent_recalc,
 };
 
-static struct clk smartreflex1_fck = {
-	.name		= "smartreflex1_fck",
+static struct clk smartreflex_core_fck = {
+	.name		= "smartreflex_core_fck",
 	.clkdm_name	= "l4_wkup_clkdm",
 	.parent		= &sys_clkin_ck,
 	.ops		= &clkops_null,
@@ -1039,8 +1039,8 @@ static struct omap_clk am33xx_clks[] = {
 	CLK(NULL,	"mcasp1_fck",		&mcasp1_fck,	CK_AM33XX),
 	CLK("NULL",	"mmc2_fck",		&mmc2_fck,	CK_AM33XX),
 	CLK(NULL,	"mmu_fck",		&mmu_fck,	CK_AM33XX),
-	CLK(NULL,	"smartreflex0_fck",	&smartreflex0_fck,	CK_AM33XX),
-	CLK(NULL,	"smartreflex1_fck",	&smartreflex1_fck,	CK_AM33XX),
+	CLK(NULL,	"smartreflex_mpu_fck",	&smartreflex_mpu_fck,	CK_AM33XX),
+	CLK(NULL,	"smartreflex_core_fck",	&smartreflex_core_fck,	CK_AM33XX),
 	CLK(NULL,	"timer1_fck",		&timer1_fck,	CK_AM33XX),
 	CLK(NULL,	"timer2_fck",		&timer2_fck,	CK_AM33XX),
 	CLK(NULL,	"timer3_fck",		&timer3_fck,	CK_AM33XX),
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 1f42c9d5ecf..d1786fca691 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -3050,8 +3050,8 @@ static struct clk traceclk_fck = {
 /* SR clocks */
 
 /* SmartReflex fclk (VDD1) */
-static struct clk sr1_fck = {
-	.name		= "sr1_fck",
+static struct clk smartreflex_mpu_iva_fck = {
+	.name		= "smartreflex_mpu_iva_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
@@ -3061,8 +3061,8 @@ static struct clk sr1_fck = {
 };
 
 /* SmartReflex fclk (VDD2) */
-static struct clk sr2_fck = {
-	.name		= "sr2_fck",
+static struct clk smartreflex_core_fck = {
+	.name		= "smartreflex_core_fck",
 	.ops		= &clkops_omap2_dflt_wait,
 	.parent		= &sys_ck,
 	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
@@ -3478,8 +3478,8 @@ static struct omap_clk omap3xxx_clks[] = {
 	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_3XXX),
 	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_3XXX),
 	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_3XXX),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_34XX | CK_36XX),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"smartreflex_mpu_iva_fck",	&smartreflex_mpu_iva_fck,	CK_34XX | CK_36XX),
+	CLK(NULL,	"smartreflex_core_fck",	&smartreflex_core_fck,	CK_34XX | CK_36XX),
 	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_34XX | CK_36XX),
 	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_3XXX),
 	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 6efc30c961a..dc92e5f4e78 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3226,9 +3226,9 @@ static struct omap_clk omap44xx_clks[] = {
 	CLK(NULL,	"slimbus2_fclk_0",		&slimbus2_fclk_0,	CK_443X),
 	CLK(NULL,	"slimbus2_slimbus_clk",		&slimbus2_slimbus_clk,	CK_443X),
 	CLK(NULL,	"slimbus2_fck",			&slimbus2_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_core_fck",		&smartreflex_core_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_iva_fck",		&smartreflex_iva_fck,	CK_443X),
-	CLK(NULL,	"smartreflex_mpu_fck",		&smartreflex_mpu_fck,	CK_443X),
+	CLK(NULL,	"smartreflex_core_fck",	&smartreflex_core_fck,	CK_443X),
+	CLK(NULL,	"smartreflex_iva_fck",	&smartreflex_iva_fck,	CK_443X),
+	CLK(NULL,	"smartreflex_mpu_fck",	&smartreflex_mpu_fck,	CK_443X),
 	CLK(NULL,	"timer1_fck",			&timer1_fck,	CK_443X),
 	CLK(NULL,	"timer10_fck",			&timer10_fck,	CK_443X),
 	CLK(NULL,	"timer11_fck",			&timer11_fck,	CK_443X),
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index a89e8256fd0..d236257626b 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -201,6 +201,7 @@
 #define OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO	0x249
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP50	0x254
 #define OMAP44XX_CONTROL_FUSE_CORE_OPP100	0x257
+#define OMAP44XX_CONTROL_FUSE_CORE_OPP100OV	0x25A
 
 /* AM35XX only CONTROL_GENERAL register offsets */
 #define AM35XX_CONTROL_MSUSPENDMUX_6    (OMAP2_CONTROL_GENERAL + 0x0038)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f67b7ee07dd..9693a187ff6 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1406,7 +1406,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_mpu_irqs[] = {
 static struct omap_hwmod omap34xx_sr1_hwmod = {
 	.name		= "smartreflex_mpu_iva",
 	.class		= &omap34xx_smartreflex_hwmod_class,
-	.main_clk	= "sr1_fck",
+	.main_clk	= "smartreflex_mpu_iva_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1424,7 +1424,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = {
 static struct omap_hwmod omap36xx_sr1_hwmod = {
 	.name		= "smartreflex_mpu_iva",
 	.class		= &omap36xx_smartreflex_hwmod_class,
-	.main_clk	= "sr1_fck",
+	.main_clk	= "smartreflex_mpu_iva_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1451,7 +1451,7 @@ static struct omap_hwmod_irq_info omap3_smartreflex_core_irqs[] = {
 static struct omap_hwmod omap34xx_sr2_hwmod = {
 	.name		= "smartreflex_core",
 	.class		= &omap34xx_smartreflex_hwmod_class,
-	.main_clk	= "sr2_fck",
+	.main_clk	= "smartreflex_core_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
@@ -1469,7 +1469,7 @@ static struct omap_hwmod omap34xx_sr2_hwmod = {
 static struct omap_hwmod omap36xx_sr2_hwmod = {
 	.name		= "smartreflex_core",
 	.class		= &omap36xx_smartreflex_hwmod_class,
-	.main_clk	= "sr2_fck",
+	.main_clk	= "smartreflex_core_fck",
 	.prcm		= {
 		.omap2 = {
 			.prcm_reg_id = 1,
diff --git a/arch/arm/mach-omap2/omap_opp_data.h b/arch/arm/mach-omap2/omap_opp_data.h
index c784c12f98a..18a750e296a 100644
--- a/arch/arm/mach-omap2/omap_opp_data.h
+++ b/arch/arm/mach-omap2/omap_opp_data.h
@@ -89,8 +89,11 @@ extern struct omap_volt_data omap34xx_vddcore_volt_data[];
 extern struct omap_volt_data omap36xx_vddmpu_volt_data[];
 extern struct omap_volt_data omap36xx_vddcore_volt_data[];
 
-extern struct omap_volt_data omap44xx_vdd_mpu_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_iva_volt_data[];
-extern struct omap_volt_data omap44xx_vdd_core_volt_data[];
+extern struct omap_volt_data omap443x_vdd_mpu_volt_data[];
+extern struct omap_volt_data omap443x_vdd_iva_volt_data[];
+extern struct omap_volt_data omap443x_vdd_core_volt_data[];
+extern struct omap_volt_data omap446x_vdd_mpu_volt_data[];
+extern struct omap_volt_data omap446x_vdd_iva_volt_data[];
+extern struct omap_volt_data omap446x_vdd_core_volt_data[];
 
 #endif		/* __ARCH_ARM_MACH_OMAP2_OMAP_OPP_DATA_H */
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index f515a1a056d..7ff9667d976 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -30,16 +30,6 @@
 #define OMAP3_VP_VSTEPMAX_VSTEPMAX	0x04
 #define OMAP3_VP_VLIMITTO_TIMEOUT_US	200
 
-#define OMAP3430_VP1_VLIMITTO_VDDMIN	0x14
-#define OMAP3430_VP1_VLIMITTO_VDDMAX	0x42
-#define OMAP3430_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3430_VP2_VLIMITTO_VDDMAX	0x2c
-
-#define OMAP3630_VP1_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP1_VLIMITTO_VDDMAX	0x3c
-#define OMAP3630_VP2_VLIMITTO_VDDMIN	0x18
-#define OMAP3630_VP2_VLIMITTO_VDDMAX	0x30
-
 #define OMAP4_SRI2C_SLAVE_ADDR		0x12
 #define OMAP4_VDD_MPU_SR_VOLT_REG	0x55
 #define OMAP4_VDD_MPU_SR_CMD_REG	0x56
@@ -53,13 +43,6 @@
 #define OMAP4_VP_VSTEPMAX_VSTEPMAX	0x04
 #define OMAP4_VP_VLIMITTO_TIMEOUT_US	200
 
-#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	0x39
-#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	0x2D
-#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	0xA
-#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	0x28
-
 static bool is_offset_valid;
 static u8 smps_offset;
 /*
@@ -158,16 +141,11 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
 static struct omap_voltdm_pmic omap3_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1000000,
-	.ret_volt		= 975000,
-	.off_volt		= 600000,
-	.volt_setup_time	= 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP1_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
+	.vddmin			= 600000,
+	.vddmax			= 1450000,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP3_VDD_MPU_SR_CONTROL_REG,
@@ -179,16 +157,11 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = {
 static struct omap_voltdm_pmic omap3_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12500,
-	.on_volt                = 1200000,
-	.onlp_volt              = 1000000,
-	.ret_volt               = 975000,
-	.off_volt               = 600000,
-	.volt_setup_time        = 0xfff,
 	.vp_erroroffset		= OMAP3_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP3_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP3_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP3430_VP2_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
+	.vddmin			= 600000,
+	.vddmax			= 1450000,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP3_VDD_CORE_SR_CONTROL_REG,
@@ -200,21 +173,17 @@ static struct omap_voltdm_pmic omap3_core_pmic = {
 static struct omap_voltdm_pmic omap4_mpu_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1375000,
-	.onlp_volt		= 1375000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_MPU_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_MPU_SR_CMD_REG,
 	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -222,21 +191,17 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = {
 static struct omap_voltdm_pmic omap4_iva_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1188000,
-	.onlp_volt		= 1188000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_IVA_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_IVA_SR_CMD_REG,
 	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -244,20 +209,17 @@ static struct omap_voltdm_pmic omap4_iva_pmic = {
 static struct omap_voltdm_pmic omap4_core_pmic = {
 	.slew_rate		= 4000,
 	.step_size		= 12660,
-	.on_volt		= 1200000,
-	.onlp_volt		= 1200000,
-	.ret_volt		= 830000,
-	.off_volt		= 0,
-	.volt_setup_time	= 0,
 	.vp_erroroffset		= OMAP4_VP_CONFIG_ERROROFFSET,
 	.vp_vstepmin		= OMAP4_VP_VSTEPMIN_VSTEPMIN,
 	.vp_vstepmax		= OMAP4_VP_VSTEPMAX_VSTEPMAX,
-	.vp_vddmin		= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
-	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+	.vddmin			= 0,
+	.vddmax			= 2100000,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
 	.volt_reg_addr		= OMAP4_VDD_CORE_SR_VOLT_REG,
 	.cmd_reg_addr		= OMAP4_VDD_CORE_SR_CMD_REG,
+	.i2c_high_speed		= true,
+	.i2c_pad_load		= 3,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -288,13 +250,6 @@ int __init omap3_twl_init(void)
 	if (!cpu_is_omap34xx())
 		return -ENODEV;
 
-	if (cpu_is_omap3630()) {
-		omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN;
-		omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX;
-		omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN;
-		omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX;
-	}
-
 	/*
 	 * The smartreflex bit on twl4030 specifies if the setting of voltage
 	 * is done over the I2C_SR path. Since this setting is independent of
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index a9fd6d5fe79..d470b728e72 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -1,7 +1,7 @@
 /*
  * OMAP4 OPP table definitions.
  *
- * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2012 Texas Instruments Incorporated - http://www.ti.com/
  *	Nishanth Menon
  *	Kevin Hilman
  *	Thara Gopinath
@@ -35,7 +35,7 @@
 #define OMAP4430_VDD_MPU_OPPTURBO_UV		1313000
 #define OMAP4430_VDD_MPU_OPPNITRO_UV		1375000
 
-struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
+struct omap_volt_data omap443x_vdd_mpu_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
@@ -47,7 +47,7 @@ struct omap_volt_data omap44xx_vdd_mpu_volt_data[] = {
 #define OMAP4430_VDD_IVA_OPP100_UV		1188000
 #define OMAP4430_VDD_IVA_OPPTURBO_UV		1300000
 
-struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
+struct omap_volt_data omap443x_vdd_iva_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
@@ -57,14 +57,14 @@ struct omap_volt_data omap44xx_vdd_iva_volt_data[] = {
 #define OMAP4430_VDD_CORE_OPP50_UV		1025000
 #define OMAP4430_VDD_CORE_OPP100_UV		1200000
 
-struct omap_volt_data omap44xx_vdd_core_volt_data[] = {
+struct omap_volt_data omap443x_vdd_core_volt_data[] = {
 	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
 	VOLT_DATA_DEFINE(OMAP4430_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
 	VOLT_DATA_DEFINE(0, 0, 0, 0),
 };
 
 
-static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
+static struct omap_opp_def __initdata omap443x_opp_def_list[] = {
 	/* MPU OPP1 - OPP50 */
 	OPP_INITIALIZER("mpu", true, 300000000, OMAP4430_VDD_MPU_OPP50_UV),
 	/* MPU OPP2 - OPP100 */
@@ -86,6 +86,82 @@ static struct omap_opp_def __initdata omap44xx_opp_def_list[] = {
 	/* TODO: add DSP, aess, fdif, gpu */
 };
 
+#define OMAP4460_VDD_MPU_OPP50_UV		1025000
+#define OMAP4460_VDD_MPU_OPP100_UV		1200000
+#define OMAP4460_VDD_MPU_OPPTURBO_UV		1313000
+#define OMAP4460_VDD_MPU_OPPNITRO_UV		1375000
+
+struct omap_volt_data omap446x_vdd_mpu_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP50_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPP100_UV, OMAP44XX_CONTROL_FUSE_MPU_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_MPU_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_MPU_OPPNITRO, 0xfa, 0x27),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+#define OMAP4460_VDD_IVA_OPP50_UV		1025000
+#define OMAP4460_VDD_IVA_OPP100_UV		1200000
+#define OMAP4460_VDD_IVA_OPPTURBO_UV		1313000
+#define OMAP4460_VDD_IVA_OPPNITRO_UV		1375000
+
+struct omap_volt_data omap446x_vdd_iva_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP50_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPP100_UV, OMAP44XX_CONTROL_FUSE_IVA_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPTURBO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPTURBO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_IVA_OPPNITRO_UV, OMAP44XX_CONTROL_FUSE_IVA_OPPNITRO, 0xfa, 0x23),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+#define OMAP4460_VDD_CORE_OPP50_UV		1025000
+#define OMAP4460_VDD_CORE_OPP100_UV		1200000
+#define OMAP4460_VDD_CORE_OPP100_OV_UV		1250000
+
+struct omap_volt_data omap446x_vdd_core_volt_data[] = {
+	VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP50_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP50, 0xf4, 0x0c),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(OMAP4460_VDD_CORE_OPP100_OV_UV, OMAP44XX_CONTROL_FUSE_CORE_OPP100OV, 0xf9, 0x16),
+	VOLT_DATA_DEFINE(0, 0, 0, 0),
+};
+
+static struct omap_opp_def __initdata omap446x_opp_def_list[] = {
+	/* MPU OPP1 - OPP50 */
+	OPP_INITIALIZER("mpu", true, 350000000, OMAP4460_VDD_MPU_OPP50_UV),
+	/* MPU OPP2 - OPP100 */
+	OPP_INITIALIZER("mpu", true, 700000000, OMAP4460_VDD_MPU_OPP100_UV),
+	/* MPU OPP3 - OPP-Turbo */
+	OPP_INITIALIZER("mpu", true, 920000000, OMAP4460_VDD_MPU_OPPTURBO_UV),
+	/*
+	 * MPU OPP4 - OPP-Nitro + Disabled as the reference schematics
+	 * recommends TPS623631 - confirm and enable the opp in board file
+	 * XXX: May be we should enable these based on mpu capability and
+	 * Exception board files disable it...
+	 */
+	OPP_INITIALIZER("mpu", false, 1200000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
+	/* MPU OPP4 - OPP-Nitro SpeedBin */
+	OPP_INITIALIZER("mpu", false, 1500000000, OMAP4460_VDD_MPU_OPPNITRO_UV),
+	/* L3 OPP1 - OPP50 */
+	OPP_INITIALIZER("l3_main_1", true, 100000000, OMAP4460_VDD_CORE_OPP50_UV),
+	/* L3 OPP2 - OPP100 */
+	OPP_INITIALIZER("l3_main_1", true, 200000000, OMAP4460_VDD_CORE_OPP100_UV),
+	/* IVA OPP1 - OPP50 */
+	OPP_INITIALIZER("iva", true, 133000000, OMAP4460_VDD_IVA_OPP50_UV),
+	/* IVA OPP2 - OPP100 */
+	OPP_INITIALIZER("iva", true, 266100000, OMAP4460_VDD_IVA_OPP100_UV),
+	/*
+	 * IVA OPP3 - OPP-Turbo + Disabled as the reference schematics
+	 * recommends Phoenix VCORE2 which can supply only 600mA - so the ones
+	 * above this OPP frequency, even though OMAP is capable, should be
+	 * enabled by board file which is sure of the chip power capability
+	 */
+	OPP_INITIALIZER("iva", false, 332000000, OMAP4460_VDD_IVA_OPPTURBO_UV),
+	/* IVA OPP4 - OPP-Nitro */
+	OPP_INITIALIZER("iva", false, 430000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
+	/* IVA OPP5 - OPP-Nitro SpeedBin*/
+	OPP_INITIALIZER("iva", false, 500000000, OMAP4460_VDD_IVA_OPPNITRO_UV),
+
+	/* TODO: add DSP, aess, fdif, gpu */
+};
+
 /**
  * omap4_opp_init() - initialize omap4 opp table
  */
@@ -93,12 +169,12 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap443x())
-		return r;
-
-	r = omap_init_opp_table(omap44xx_opp_def_list,
-			ARRAY_SIZE(omap44xx_opp_def_list));
-
+	if (cpu_is_omap443x())
+		r = omap_init_opp_table(omap443x_opp_def_list,
+			ARRAY_SIZE(omap443x_opp_def_list));
+	else if (cpu_is_omap446x())
+		r = omap_init_opp_table(omap446x_opp_def_list,
+			ARRAY_SIZE(omap446x_opp_def_list));
 	return r;
 }
 device_initcall(omap4_opp_init);
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index ea61c32957b..109a02e02d7 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -39,6 +39,36 @@ static struct omap_device_pm_latency *pm_lats;
  */
 int (*omap_pm_suspend)(void);
 
+/**
+ * struct omap2_oscillator - Describe the board main oscillator latencies
+ * @startup_time: oscillator startup latency
+ * @shutdown_time: oscillator shutdown latency
+ */
+struct omap2_oscillator {
+	u32 startup_time;
+	u32 shutdown_time;
+};
+
+static struct omap2_oscillator oscillator = {
+	.startup_time = ULONG_MAX,
+	.shutdown_time = ULONG_MAX,
+};
+
+void omap_pm_setup_oscillator(u32 tstart, u32 tshut)
+{
+	oscillator.startup_time = tstart;
+	oscillator.shutdown_time = tshut;
+}
+
+void omap_pm_get_oscillator(u32 *tstart, u32 *tshut)
+{
+	if (!tstart || !tshut)
+		return;
+
+	*tstart = oscillator.startup_time;
+	*tshut = oscillator.shutdown_time;
+}
+
 static int __init _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 67d66131cfa..4db7b238a0d 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -129,4 +129,14 @@ static inline int omap4_twl_init(void)
 }
 #endif
 
+#ifdef CONFIG_PM
+extern void omap_pm_setup_oscillator(u32 tstart, u32 tshut);
+extern void omap_pm_get_oscillator(u32 *tstart, u32 *tshut);
+extern void omap_pm_setup_sr_i2c_pcb_length(u32 mm);
+#else
+static inline void omap_pm_setup_oscillator(u32 tstart, u32 tshut) { }
+static inline void omap_pm_get_oscillator(u32 *tstart, u32 *tshut) { }
+static inline void omap_pm_setup_sr_i2c_pcb_length(u32 mm) { }
+#endif
+
 #endif
diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c
index f8217a5a4a2..a04bc25a1d2 100644
--- a/arch/arm/mach-omap2/sr_device.c
+++ b/arch/arm/mach-omap2/sr_device.c
@@ -121,6 +121,19 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 	sr_data->senn_mod = 0x1;
 	sr_data->senp_mod = 0x1;
 
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
+		sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
+		sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
+		if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
+			sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
+			sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
+		} else {
+			sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
+			sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
+		}
+	}
+
 	sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
 	if (!sr_data->voltdm) {
 		pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 880249b1701..687aa86c0d5 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -11,13 +11,20 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/bug.h>
+#include <linux/io.h>
 
+#include <asm/div64.h>
+
+#include "iomap.h"
 #include "soc.h"
 #include "voltage.h"
 #include "vc.h"
 #include "prm-regbits-34xx.h"
 #include "prm-regbits-44xx.h"
 #include "prm44xx.h"
+#include "pm.h"
+#include "scrm44xx.h"
+#include "control.h"
 
 /**
  * struct omap_vc_channel_cfg - describe the cfg_channel bitfield
@@ -63,6 +70,9 @@ static struct omap_vc_channel_cfg vc_mutant_channel_cfg = {
 };
 
 static struct omap_vc_channel_cfg *vc_cfg_bits;
+
+/* Default I2C trace length on pcb, 6.3cm. Used for capacitance calculations. */
+static u32 sr_i2c_pcb_length = 63;
 #define CFG_CHANNEL_MASK 0x1f
 
 /**
@@ -135,6 +145,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm,
 	vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift);
 	voltdm->write(vc_cmdval, vc->cmdval_reg);
 
+	voltdm->vc_param->on = target_volt;
+
 	omap_vp_update_errorgain(voltdm, target_volt);
 
 	return 0;
@@ -202,46 +214,389 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
 	return 0;
 }
 
-static void __init omap3_vfsm_init(struct voltagedomain *voltdm)
+/* Convert microsecond value to number of 32kHz clock cycles */
+static inline u32 omap_usec_to_32k(u32 usec)
+{
+	return DIV_ROUND_UP_ULL(32768ULL * (u64)usec, 1000000ULL);
+}
+
+/* Set oscillator setup time for omap3 */
+static void omap3_set_clksetup(u32 usec, struct voltagedomain *voltdm)
+{
+	voltdm->write(omap_usec_to_32k(usec), OMAP3_PRM_CLKSETUP_OFFSET);
+}
+
+/**
+ * omap3_set_i2c_timings - sets i2c sleep timings for a channel
+ * @voltdm: channel to configure
+ * @off_mode: select whether retention or off mode values used
+ *
+ * Calculates and sets up voltage controller to use I2C based
+ * voltage scaling for sleep modes. This can be used for either off mode
+ * or retention. Off mode has additionally an option to use sys_off_mode
+ * pad, which uses a global signal to program the whole power IC to
+ * off-mode.
+ */
+static void omap3_set_i2c_timings(struct voltagedomain *voltdm, bool off_mode)
 {
+	unsigned long voltsetup1;
+	u32 tgt_volt;
+
+	/*
+	 * Oscillator is shut down only if we are using sys_off_mode pad,
+	 * thus we set a minimal setup time here
+	 */
+	omap3_set_clksetup(1, voltdm);
+
+	if (off_mode)
+		tgt_volt = voltdm->vc_param->off;
+	else
+		tgt_volt = voltdm->vc_param->ret;
+
+	voltsetup1 = (voltdm->vc_param->on - tgt_volt) /
+			voltdm->pmic->slew_rate;
+
+	voltsetup1 = voltsetup1 * voltdm->sys_clk.rate / 8 / 1000000 + 1;
+
+	voltdm->rmw(voltdm->vfsm->voltsetup_mask,
+		voltsetup1 << __ffs(voltdm->vfsm->voltsetup_mask),
+		voltdm->vfsm->voltsetup_reg);
+
 	/*
-	 * Voltage Manager FSM parameters init
-	 * XXX This data should be passed in from the board file
+	 * pmic is not controlling the voltage scaling during retention,
+	 * thus set voltsetup2 to 0
 	 */
-	voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET);
-	voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET);
-	voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+	voltdm->write(0, OMAP3_PRM_VOLTSETUP2_OFFSET);
 }
 
-static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+/**
+ * omap3_set_off_timings - sets off-mode timings for a channel
+ * @voltdm: channel to configure
+ *
+ * Calculates and sets up off-mode timings for a channel. Off-mode
+ * can use either I2C based voltage scaling, or alternatively
+ * sys_off_mode pad can be used to send a global command to power IC.
+ * This function first checks which mode is being used, and calls
+ * omap3_set_i2c_timings() if the system is using I2C control mode.
+ * sys_off_mode has the additional benefit that voltages can be
+ * scaled to zero volt level with TWL4030 / TWL5030, I2C can only
+ * scale to 600mV.
+ */
+static void omap3_set_off_timings(struct voltagedomain *voltdm)
 {
-	static bool is_initialized;
+	unsigned long clksetup;
+	unsigned long voltsetup2;
+	unsigned long voltsetup2_old;
+	u32 val;
+	u32 tstart, tshut;
 
-	if (is_initialized)
+	/* check if sys_off_mode is used to control off-mode voltages */
+	val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
+	if (!(val & OMAP3430_SEL_OFF_MASK)) {
+		/* No, omap is controlling them over I2C */
+		omap3_set_i2c_timings(voltdm, true);
 		return;
+	}
+
+	omap_pm_get_oscillator(&tstart, &tshut);
+	omap3_set_clksetup(tstart, voltdm);
+
+	clksetup = voltdm->read(OMAP3_PRM_CLKSETUP_OFFSET);
+
+	/* voltsetup 2 in us */
+	voltsetup2 = voltdm->vc_param->on / voltdm->pmic->slew_rate;
+
+	/* convert to 32k clk cycles */
+	voltsetup2 = DIV_ROUND_UP(voltsetup2 * 32768, 1000000);
+
+	voltsetup2_old = voltdm->read(OMAP3_PRM_VOLTSETUP2_OFFSET);
+
+	/*
+	 * Update voltsetup2 if higher than current value (needed because
+	 * we have multiple channels with different ramp times), also
+	 * update voltoffset always to value recommended by TRM
+	 */
+	if (voltsetup2 > voltsetup2_old) {
+		voltdm->write(voltsetup2, OMAP3_PRM_VOLTSETUP2_OFFSET);
+		voltdm->write(clksetup - voltsetup2,
+			OMAP3_PRM_VOLTOFFSET_OFFSET);
+	} else
+		voltdm->write(clksetup - voltsetup2_old,
+			OMAP3_PRM_VOLTOFFSET_OFFSET);
+
+	/*
+	 * omap is not controlling voltage scaling during off-mode,
+	 * thus set voltsetup1 to 0
+	 */
+	voltdm->rmw(voltdm->vfsm->voltsetup_mask, 0,
+		voltdm->vfsm->voltsetup_reg);
+
+	/* voltoffset must be clksetup minus voltsetup2 according to TRM */
+	voltdm->write(clksetup - voltsetup2, OMAP3_PRM_VOLTOFFSET_OFFSET);
+}
+
+static void __init omap3_vc_init_channel(struct voltagedomain *voltdm)
+{
+	omap3_set_off_timings(voltdm);
+}
+
+/**
+ * omap4_calc_volt_ramp - calculates voltage ramping delays on omap4
+ * @voltdm: channel to calculate values for
+ * @voltage_diff: voltage difference in microvolts
+ *
+ * Calculates voltage ramp prescaler + counter values for a voltage
+ * difference on omap4. Returns a field value suitable for writing to
+ * VOLTSETUP register for a channel in following format:
+ * bits[8:9] prescaler ... bits[0:5] counter. See OMAP4 TRM for reference.
+ */
+static u32 omap4_calc_volt_ramp(struct voltagedomain *voltdm, u32 voltage_diff)
+{
+	u32 prescaler;
+	u32 cycles;
+	u32 time;
+
+	time = voltage_diff / voltdm->pmic->slew_rate;
+
+	cycles = voltdm->sys_clk.rate / 1000 * time / 1000;
+
+	cycles /= 64;
+	prescaler = 0;
+
+	/* shift to next prescaler until no overflow */
+
+	/* scale for div 256 = 64 * 4 */
+	if (cycles > 63) {
+		cycles /= 4;
+		prescaler++;
+	}
+
+	/* scale for div 512 = 256 * 2 */
+	if (cycles > 63) {
+		cycles /= 2;
+		prescaler++;
+	}
+
+	/* scale for div 2048 = 512 * 4 */
+	if (cycles > 63) {
+		cycles /= 4;
+		prescaler++;
+	}
+
+	/* check for overflow => invalid ramp time */
+	if (cycles > 63) {
+		pr_warn("%s: invalid setuptime for vdd_%s\n", __func__,
+			voltdm->name);
+		return 0;
+	}
+
+	cycles++;
 
-	omap3_vfsm_init(voltdm);
+	return (prescaler << OMAP4430_RAMP_UP_PRESCAL_SHIFT) |
+		(cycles << OMAP4430_RAMP_UP_COUNT_SHIFT);
+}
+
+/**
+ * omap4_usec_to_val_scrm - convert microsecond value to SCRM module bitfield
+ * @usec: microseconds
+ * @shift: number of bits to shift left
+ * @mask: bitfield mask
+ *
+ * Converts microsecond value to OMAP4 SCRM bitfield. Bitfield is
+ * shifted to requested position, and checked agains the mask value.
+ * If larger, forced to the max value of the field (i.e. the mask itself.)
+ * Returns the SCRM bitfield value.
+ */
+static u32 omap4_usec_to_val_scrm(u32 usec, int shift, u32 mask)
+{
+	u32 val;
+
+	val = omap_usec_to_32k(usec) << shift;
 
-	is_initialized = true;
+	/* Check for overflow, if yes, force to max value */
+	if (val > mask)
+		val = mask;
+
+	return val;
 }
 
+/**
+ * omap4_set_timings - set voltage ramp timings for a channel
+ * @voltdm: channel to configure
+ * @off_mode: whether off-mode values are used
+ *
+ * Calculates and sets the voltage ramp up / down values for a channel.
+ */
+static void omap4_set_timings(struct voltagedomain *voltdm, bool off_mode)
+{
+	u32 val;
+	u32 ramp;
+	int offset;
+	u32 tstart, tshut;
+
+	if (off_mode) {
+		ramp = omap4_calc_volt_ramp(voltdm,
+			voltdm->vc_param->on - voltdm->vc_param->off);
+		offset = voltdm->vfsm->voltsetup_off_reg;
+	} else {
+		ramp = omap4_calc_volt_ramp(voltdm,
+			voltdm->vc_param->on - voltdm->vc_param->ret);
+		offset = voltdm->vfsm->voltsetup_reg;
+	}
+
+	if (!ramp)
+		return;
+
+	val = voltdm->read(offset);
+
+	val |= ramp << OMAP4430_RAMP_DOWN_COUNT_SHIFT;
+
+	val |= ramp << OMAP4430_RAMP_UP_COUNT_SHIFT;
+
+	voltdm->write(val, offset);
+
+	omap_pm_get_oscillator(&tstart, &tshut);
+
+	val = omap4_usec_to_val_scrm(tstart, OMAP4_SETUPTIME_SHIFT,
+		OMAP4_SETUPTIME_MASK);
+	val |= omap4_usec_to_val_scrm(tshut, OMAP4_DOWNTIME_SHIFT,
+		OMAP4_DOWNTIME_MASK);
+
+	__raw_writel(val, OMAP4_SCRM_CLKSETUPTIME);
+}
 
 /* OMAP4 specific voltage init functions */
 static void __init omap4_vc_init_channel(struct voltagedomain *voltdm)
 {
-	static bool is_initialized;
-	u32 vc_val;
+	omap4_set_timings(voltdm, true);
+	omap4_set_timings(voltdm, false);
+}
+
+struct i2c_init_data {
+	u8 loadbits;
+	u8 load;
+	u8 hsscll_38_4;
+	u8 hsscll_26;
+	u8 hsscll_19_2;
+	u8 hsscll_16_8;
+	u8 hsscll_12;
+};
 
-	if (is_initialized)
+static const __initdata struct i2c_init_data omap4_i2c_timing_data[] = {
+	{
+		.load = 50,
+		.loadbits = 0x3,
+		.hsscll_38_4 = 13,
+		.hsscll_26 = 11,
+		.hsscll_19_2 = 9,
+		.hsscll_16_8 = 9,
+		.hsscll_12 = 8,
+	},
+	{
+		.load = 25,
+		.loadbits = 0x2,
+		.hsscll_38_4 = 13,
+		.hsscll_26 = 11,
+		.hsscll_19_2 = 9,
+		.hsscll_16_8 = 9,
+		.hsscll_12 = 8,
+	},
+	{
+		.load = 12,
+		.loadbits = 0x1,
+		.hsscll_38_4 = 11,
+		.hsscll_26 = 10,
+		.hsscll_19_2 = 9,
+		.hsscll_16_8 = 9,
+		.hsscll_12 = 8,
+	},
+	{
+		.load = 0,
+		.loadbits = 0x0,
+		.hsscll_38_4 = 12,
+		.hsscll_26 = 10,
+		.hsscll_19_2 = 9,
+		.hsscll_16_8 = 8,
+		.hsscll_12 = 8,
+	},
+};
+
+/**
+ * omap4_vc_i2c_timing_init - sets up board I2C timing parameters
+ * @voltdm: voltagedomain pointer to get data from
+ *
+ * Use PMIC + board supplied settings for calculating the total I2C
+ * channel capacitance and set the timing parameters based on this.
+ * Pre-calculated values are provided in data tables, as it is not
+ * too straightforward to calculate these runtime.
+ */
+static void __init omap4_vc_i2c_timing_init(struct voltagedomain *voltdm)
+{
+	u32 capacitance;
+	u32 val;
+	u16 hsscll;
+	const struct i2c_init_data *i2c_data;
+
+	if (!voltdm->pmic->i2c_high_speed) {
+		pr_warn("%s: only high speed supported!\n", __func__);
 		return;
+	}
+
+	/* PCB trace capacitance, 0.125pF / mm => mm / 8 */
+	capacitance = DIV_ROUND_UP(sr_i2c_pcb_length, 8);
+
+	/* OMAP pad capacitance */
+	capacitance += 4;
+
+	/* PMIC pad capacitance */
+	capacitance += voltdm->pmic->i2c_pad_load;
+
+	/* Search for capacitance match in the table */
+	i2c_data = omap4_i2c_timing_data;
+
+	while (i2c_data->load > capacitance)
+		i2c_data++;
+
+	/* Select proper values based on sysclk frequency */
+	switch (voltdm->sys_clk.rate) {
+	case 38400000:
+		hsscll = i2c_data->hsscll_38_4;
+		break;
+	case 26000000:
+		hsscll = i2c_data->hsscll_26;
+		break;
+	case 19200000:
+		hsscll = i2c_data->hsscll_19_2;
+		break;
+	case 16800000:
+		hsscll = i2c_data->hsscll_16_8;
+		break;
+	case 12000000:
+		hsscll = i2c_data->hsscll_12;
+		break;
+	default:
+		pr_warn("%s: unsupported sysclk rate: %d!\n", __func__,
+			voltdm->sys_clk.rate);
+		return;
+	}
 
-	/* XXX These are magic numbers and do not belong! */
-	vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT);
-	voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
+	/* Loadbits define pull setup for the I2C channels */
+	val = i2c_data->loadbits << 25 | i2c_data->loadbits << 29;
 
-	is_initialized = true;
+	/* Write to SYSCTRL_PADCONF_WKUP_CTRL_I2C_2 to setup I2C pull */
+	__raw_writel(val, OMAP2_L4_IO_ADDRESS(OMAP4_CTRL_MODULE_PAD_WKUP +
+				OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2));
+
+	/* HSSCLH can always be zero */
+	val = hsscll << OMAP4430_HSSCLL_SHIFT;
+	val |= (0x28 << OMAP4430_SCLL_SHIFT | 0x2c << OMAP4430_SCLH_SHIFT);
+
+	/* Write setup times to I2C config register */
+	voltdm->write(val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET);
 }
 
+
+
 /**
  * omap_vc_i2c_init - initialize I2C interface to PMIC
  * @voltdm: voltage domain containing VC data
@@ -281,9 +636,49 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 			    mcode << __ffs(vc->common->i2c_mcode_mask),
 			    vc->common->i2c_cfg_reg);
 
+	if (cpu_is_omap44xx())
+		omap4_vc_i2c_timing_init(voltdm);
+
 	initialized = true;
 }
 
+/**
+ * omap_vc_calc_vsel - calculate vsel value for a channel
+ * @voltdm: channel to calculate value for
+ * @uvolt: microvolt value to convert to vsel
+ *
+ * Converts a microvolt value to vsel value for the used PMIC.
+ * This checks whether the microvolt value is out of bounds, and
+ * adjusts the value accordingly. If unsupported value detected,
+ * warning is thrown.
+ */
+static u8 omap_vc_calc_vsel(struct voltagedomain *voltdm, u32 uvolt)
+{
+	if (voltdm->pmic->vddmin > uvolt)
+		uvolt = voltdm->pmic->vddmin;
+	if (voltdm->pmic->vddmax < uvolt) {
+		WARN(1, "%s: voltage not supported by pmic: %u vs max %u\n",
+			__func__, uvolt, voltdm->pmic->vddmax);
+		/* Lets try maximum value anyway */
+		uvolt = voltdm->pmic->vddmax;
+	}
+
+	return voltdm->pmic->uv_to_vsel(uvolt);
+}
+
+/**
+ * omap_pm_setup_sr_i2c_pcb_length - set length of SR I2C traces on PCB
+ * @mm: length of the PCB trace in millimetres
+ *
+ * Sets the PCB trace length for the I2C channel. By default uses 63mm.
+ * This is needed for properly calculating the capacitance value for
+ * the PCB trace, and for setting the SR I2C channel timing parameters.
+ */
+void __init omap_pm_setup_sr_i2c_pcb_length(u32 mm)
+{
+	sr_i2c_pcb_length = mm;
+}
+
 void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 {
 	struct omap_vc_channel *vc = voltdm->vc;
@@ -311,7 +706,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr;
 	vc->volt_reg_addr = voltdm->pmic->volt_reg_addr;
 	vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr;
-	vc->setup_time = voltdm->pmic->volt_setup_time;
 
 	/* Configure the i2c slave address for this VC */
 	voltdm->rmw(vc->smps_sa_mask,
@@ -331,14 +725,18 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 		voltdm->rmw(vc->smps_cmdra_mask,
 			    vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask),
 			    vc->smps_cmdra_reg);
-		vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen;
+		vc->cfg_channel |= vc_cfg_bits->rac;
 	}
 
+	if (vc->cmd_reg_addr == vc->volt_reg_addr)
+		vc->cfg_channel |= vc_cfg_bits->racen;
+
 	/* Set up the on, inactive, retention and off voltage */
-	on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt);
-	onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt);
-	ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt);
-	off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt);
+	on_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->on);
+	onlp_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->onlp);
+	ret_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->ret);
+	off_vsel = omap_vc_calc_vsel(voltdm, voltdm->vc_param->off);
+
 	val = ((on_vsel << vc->common->cmd_on_shift) |
 	       (onlp_vsel << vc->common->cmd_onlp_shift) |
 	       (ret_vsel << vc->common->cmd_ret_shift) |
@@ -349,11 +747,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	/* Channel configuration */
 	omap_vc_config_channel(voltdm);
 
-	/* Configure the setup times */
-	voltdm->rmw(voltdm->vfsm->voltsetup_mask,
-		    vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask),
-		    voltdm->vfsm->voltsetup_reg);
-
 	omap_vc_i2c_init(voltdm);
 
 	if (cpu_is_omap34xx())
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index 478bf6b432c..91c8d75bf2e 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -86,7 +86,6 @@ struct omap_vc_channel {
 	u16 i2c_slave_addr;
 	u16 volt_reg_addr;
 	u16 cmd_reg_addr;
-	u16 setup_time;
 	u8 cfg_channel;
 	bool i2c_high_speed;
 
@@ -111,6 +110,13 @@ extern struct omap_vc_channel omap4_vc_mpu;
 extern struct omap_vc_channel omap4_vc_iva;
 extern struct omap_vc_channel omap4_vc_core;
 
+extern struct omap_vc_param omap3_mpu_vc_data;
+extern struct omap_vc_param omap3_core_vc_data;
+
+extern struct omap_vc_param omap4_mpu_vc_data;
+extern struct omap_vc_param omap4_iva_vc_data;
+extern struct omap_vc_param omap4_core_vc_data;
+
 void omap_vc_init_channel(struct voltagedomain *voltdm);
 int omap_vc_pre_scale(struct voltagedomain *voltdm,
 		      unsigned long target_volt,
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 5d8eaf31569..75bc4aa22b3 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -71,3 +71,25 @@ struct omap_vc_channel omap3_vc_core = {
 	.smps_cmdra_mask = OMAP3430_CMDRA1_MASK,
 	.cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
 };
+
+/*
+ * Voltage levels for different operating modes: on, sleep, retention and off
+ */
+#define OMAP3_ON_VOLTAGE_UV		1200000
+#define OMAP3_ONLP_VOLTAGE_UV		1000000
+#define OMAP3_RET_VOLTAGE_UV		975000
+#define OMAP3_OFF_VOLTAGE_UV		600000
+
+struct omap_vc_param omap3_mpu_vc_data = {
+	.on		= OMAP3_ON_VOLTAGE_UV,
+	.onlp		= OMAP3_ONLP_VOLTAGE_UV,
+	.ret		= OMAP3_RET_VOLTAGE_UV,
+	.off		= OMAP3_OFF_VOLTAGE_UV,
+};
+
+struct omap_vc_param omap3_core_vc_data = {
+	.on		= OMAP3_ON_VOLTAGE_UV,
+	.onlp		= OMAP3_ONLP_VOLTAGE_UV,
+	.ret		= OMAP3_RET_VOLTAGE_UV,
+	.off		= OMAP3_OFF_VOLTAGE_UV,
+};
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index d70b930f273..085e5d6a04f 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -87,3 +87,31 @@ struct omap_vc_channel omap4_vc_core = {
 	.cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT,
 };
 
+/*
+ * Voltage levels for different operating modes: on, sleep, retention and off
+ */
+#define OMAP4_ON_VOLTAGE_UV			1375000
+#define OMAP4_ONLP_VOLTAGE_UV			1375000
+#define OMAP4_RET_VOLTAGE_UV			837500
+#define OMAP4_OFF_VOLTAGE_UV			0
+
+struct omap_vc_param omap4_mpu_vc_data = {
+	.on			= OMAP4_ON_VOLTAGE_UV,
+	.onlp			= OMAP4_ONLP_VOLTAGE_UV,
+	.ret			= OMAP4_RET_VOLTAGE_UV,
+	.off			= OMAP4_OFF_VOLTAGE_UV,
+};
+
+struct omap_vc_param omap4_iva_vc_data = {
+	.on			= OMAP4_ON_VOLTAGE_UV,
+	.onlp			= OMAP4_ONLP_VOLTAGE_UV,
+	.ret			= OMAP4_RET_VOLTAGE_UV,
+	.off			= OMAP4_OFF_VOLTAGE_UV,
+};
+
+struct omap_vc_param omap4_core_vc_data = {
+	.on			= OMAP4_ON_VOLTAGE_UV,
+	.onlp			= OMAP4_ONLP_VOLTAGE_UV,
+	.ret			= OMAP4_RET_VOLTAGE_UV,
+	.off			= OMAP4_OFF_VOLTAGE_UV,
+};
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 7283b7ed7de..a0ce4f10ff1 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -40,12 +40,14 @@ struct powerdomain;
  * data
  * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register
  * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base
+ * @voltsetup_off_reg: register offset of PRM_VOLTSETUP_OFF from PRM base
  *
  * XXX What about VOLTOFFSET/VOLTCTRL?
  */
 struct omap_vfsm_instance {
 	u32 voltsetup_mask;
 	u8 voltsetup_reg;
+	u8 voltsetup_off_reg;
 };
 
 /**
@@ -74,6 +76,8 @@ struct voltagedomain {
 	const struct omap_vfsm_instance *vfsm;
 	struct omap_vp_instance *vp;
 	struct omap_voltdm_pmic *pmic;
+	struct omap_vp_param *vp_param;
+	struct omap_vc_param *vc_param;
 
 	/* VC/VP register access functions: SoC specific */
 	u32 (*read) (u8 offset);
@@ -92,6 +96,24 @@ struct voltagedomain {
 	struct omap_volt_data *volt_data;
 };
 
+/* Min and max voltages from OMAP perspective */
+#define OMAP3430_VP1_VLIMITTO_VDDMIN	850000
+#define OMAP3430_VP1_VLIMITTO_VDDMAX	1425000
+#define OMAP3430_VP2_VLIMITTO_VDDMIN	900000
+#define OMAP3430_VP2_VLIMITTO_VDDMAX	1150000
+
+#define OMAP3630_VP1_VLIMITTO_VDDMIN	900000
+#define OMAP3630_VP1_VLIMITTO_VDDMAX	1350000
+#define OMAP3630_VP2_VLIMITTO_VDDMIN	900000
+#define OMAP3630_VP2_VLIMITTO_VDDMAX	1200000
+
+#define OMAP4_VP_MPU_VLIMITTO_VDDMIN	830000
+#define OMAP4_VP_MPU_VLIMITTO_VDDMAX	1410000
+#define OMAP4_VP_IVA_VLIMITTO_VDDMIN	830000
+#define OMAP4_VP_IVA_VLIMITTO_VDDMAX	1260000
+#define OMAP4_VP_CORE_VLIMITTO_VDDMIN	830000
+#define OMAP4_VP_CORE_VLIMITTO_VDDMAX	1200000
+
 /**
  * struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
  * @slew_rate:	PMIC slew rate (in uv/us)
@@ -107,26 +129,34 @@ struct voltagedomain {
 struct omap_voltdm_pmic {
 	int slew_rate;
 	int step_size;
-	u32 on_volt;
-	u32 onlp_volt;
-	u32 ret_volt;
-	u32 off_volt;
-	u16 volt_setup_time;
 	u16 i2c_slave_addr;
 	u16 volt_reg_addr;
 	u16 cmd_reg_addr;
 	u8 vp_erroroffset;
 	u8 vp_vstepmin;
 	u8 vp_vstepmax;
-	u8 vp_vddmin;
-	u8 vp_vddmax;
+	u32 vddmin;
+	u32 vddmax;
 	u8 vp_timeout_us;
 	bool i2c_high_speed;
+	u32 i2c_pad_load;
 	u8 i2c_mcode;
 	unsigned long (*vsel_to_uv) (const u8 vsel);
 	u8 (*uv_to_vsel) (unsigned long uV);
 };
 
+struct omap_vp_param {
+	u32 vddmax;
+	u32 vddmin;
+};
+
+struct omap_vc_param {
+	u32 on;
+	u32 onlp;
+	u32 ret;
+	u32 off;
+};
+
 void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 		struct omap_volt_data **volt_data);
 struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index 63afbfed3cb..261bb7cb4e6 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -117,6 +117,11 @@ void __init omap3xxx_voltagedomains_init(void)
 	}
 #endif
 
+	omap3_voltdm_mpu.vp_param = &omap3_mpu_vp_data;
+	omap3_voltdm_core.vp_param = &omap3_core_vp_data;
+	omap3_voltdm_mpu.vc_param = &omap3_mpu_vc_data;
+	omap3_voltdm_core.vc_param = &omap3_core_vc_data;
+
 	if (soc_is_am35xx())
 		voltdms = voltagedomains_am35xx;
 	else
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index c3115f6853d..b893c8e6f88 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -34,14 +34,17 @@
 
 static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = {
 	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET,
+	.voltsetup_off_reg = OMAP4_PRM_VOLTSETUP_MPU_OFF_OFFSET,
 };
 
 static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = {
 	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET,
+	.voltsetup_off_reg = OMAP4_PRM_VOLTSETUP_IVA_OFF_OFFSET,
 };
 
 static const struct omap_vfsm_instance omap4_vdd_core_vfsm = {
 	.voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET,
+	.voltsetup_off_reg = OMAP4_PRM_VOLTSETUP_CORE_OFF_OFFSET,
 };
 
 static struct voltagedomain omap4_voltdm_mpu = {
@@ -101,11 +104,25 @@ void __init omap44xx_voltagedomains_init(void)
 	 * for the currently-running IC
 	 */
 #ifdef CONFIG_PM_OPP
-	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
-	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
-	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+	if (cpu_is_omap443x()) {
+		omap4_voltdm_mpu.volt_data = omap443x_vdd_mpu_volt_data;
+		omap4_voltdm_iva.volt_data = omap443x_vdd_iva_volt_data;
+		omap4_voltdm_core.volt_data = omap443x_vdd_core_volt_data;
+	} else if (cpu_is_omap446x()) {
+		omap4_voltdm_mpu.volt_data = omap446x_vdd_mpu_volt_data;
+		omap4_voltdm_iva.volt_data = omap446x_vdd_iva_volt_data;
+		omap4_voltdm_core.volt_data = omap446x_vdd_core_volt_data;
+	}
 #endif
 
+	omap4_voltdm_mpu.vp_param = &omap4_mpu_vp_data;
+	omap4_voltdm_iva.vp_param = &omap4_iva_vp_data;
+	omap4_voltdm_core.vp_param = &omap4_core_vp_data;
+
+	omap4_voltdm_mpu.vc_param = &omap4_mpu_vc_data;
+	omap4_voltdm_iva.vc_param = &omap4_iva_vc_data;
+	omap4_voltdm_core.vc_param = &omap4_core_vc_data;
+
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;
 
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index 85241b828c0..a3c30655aa3 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -58,8 +58,10 @@ void __init omap_vp_init(struct voltagedomain *voltdm)
 	sys_clk_rate = voltdm->sys_clk.rate / 1000;
 
 	timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000;
-	vddmin = voltdm->pmic->vp_vddmin;
-	vddmax = voltdm->pmic->vp_vddmax;
+	vddmin = max(voltdm->vp_param->vddmin, voltdm->pmic->vddmin);
+	vddmax = min(voltdm->vp_param->vddmax, voltdm->pmic->vddmax);
+	vddmin = voltdm->pmic->uv_to_vsel(vddmin);
+	vddmax = voltdm->pmic->uv_to_vsel(vddmax);
 
 	waittime = DIV_ROUND_UP(voltdm->pmic->step_size * sys_clk_rate,
 				1000 * voltdm->pmic->slew_rate);
@@ -138,7 +140,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm,
 		udelay(1);
 	}
 	if (timeout >= VP_TRANXDONE_TIMEOUT) {
-		pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted",
+		pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted\n",
 			__func__, voltdm->name);
 		return -ETIMEDOUT;
 	}
@@ -197,7 +199,7 @@ void omap_vp_enable(struct voltagedomain *voltdm)
 	u32 vpconfig, volt;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -214,8 +216,8 @@ void omap_vp_enable(struct voltagedomain *voltdm)
 
 	volt = voltdm_get_voltage(voltdm);
 	if (!volt) {
-		pr_warning("%s: unable to find current voltage for %s\n",
-			   __func__, voltdm->name);
+		pr_warn("%s: unable to find current voltage for %s\n",
+			__func__, voltdm->name);
 		return;
 	}
 
@@ -242,7 +244,7 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 	int timeout;
 
 	if (!voltdm || IS_ERR(voltdm)) {
-		pr_warning("%s: VDD specified does not exist!\n", __func__);
+		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
 
@@ -272,8 +274,7 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 			  VP_IDLE_TIMEOUT, timeout);
 
 	if (timeout >= VP_IDLE_TIMEOUT)
-		pr_warning("%s: vdd_%s idle timedout\n",
-			__func__, voltdm->name);
+		pr_warn("%s: vdd_%s idle timedout\n", __func__, voltdm->name);
 
 	vp->enabled = false;
 
diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h
index 7c155d248aa..0fdf7080e4a 100644
--- a/arch/arm/mach-omap2/vp.h
+++ b/arch/arm/mach-omap2/vp.h
@@ -117,6 +117,13 @@ extern struct omap_vp_instance omap4_vp_mpu;
 extern struct omap_vp_instance omap4_vp_iva;
 extern struct omap_vp_instance omap4_vp_core;
 
+extern struct omap_vp_param omap3_mpu_vp_data;
+extern struct omap_vp_param omap3_core_vp_data;
+
+extern struct omap_vp_param omap4_mpu_vp_data;
+extern struct omap_vp_param omap4_iva_vp_data;
+extern struct omap_vp_param omap4_core_vp_data;
+
 void omap_vp_init(struct voltagedomain *voltdm);
 void omap_vp_enable(struct voltagedomain *voltdm);
 void omap_vp_disable(struct voltagedomain *voltdm);
diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c
index bd89f80089f..1914e026245 100644
--- a/arch/arm/mach-omap2/vp3xxx_data.c
+++ b/arch/arm/mach-omap2/vp3xxx_data.c
@@ -77,3 +77,13 @@ struct omap_vp_instance omap3_vp_core = {
 	.vstatus = OMAP3_PRM_VP2_STATUS_OFFSET,
 	.voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET,
 };
+
+struct omap_vp_param omap3_mpu_vp_data = {
+	.vddmin			= OMAP3430_VP1_VLIMITTO_VDDMIN,
+	.vddmax			= OMAP3430_VP1_VLIMITTO_VDDMAX,
+};
+
+struct omap_vp_param omap3_core_vp_data = {
+	.vddmin			= OMAP3430_VP2_VLIMITTO_VDDMIN,
+	.vddmax			= OMAP3430_VP2_VLIMITTO_VDDMAX,
+};
diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c
index 8c031d16879..e62f6b018be 100644
--- a/arch/arm/mach-omap2/vp44xx_data.c
+++ b/arch/arm/mach-omap2/vp44xx_data.c
@@ -87,3 +87,18 @@ struct omap_vp_instance omap4_vp_core = {
 	.vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET,
 	.voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET,
 };
+
+struct omap_vp_param omap4_mpu_vp_data = {
+	.vddmin			= OMAP4_VP_MPU_VLIMITTO_VDDMIN,
+	.vddmax			= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
+};
+
+struct omap_vp_param omap4_iva_vp_data = {
+	.vddmin			= OMAP4_VP_IVA_VLIMITTO_VDDMIN,
+	.vddmax			= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
+};
+
+struct omap_vp_param omap4_core_vp_data = {
+	.vddmin			= OMAP4_VP_CORE_VLIMITTO_VDDMIN,
+	.vddmax			= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
+};