[MIPS] db1x00: Remove unused mirage_ts.c

CONFIG_WM97XX_COMODULE doesn't exist.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

2 files changed, 0 insertions, 261 deletions

diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 4c7d763f211..51d62bd5d90 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -6,4 +6,3 @@
 # Makefile for the Alchemy Semiconductor Db1x00 board.
 
 lib-y := init.o board_setup.o irqmap.o
-obj-$(CONFIG_WM97XX_COMODULE) += mirage_ts.o
diff --git a/arch/mips/au1000/db1x00/mirage_ts.c b/arch/mips/au1000/db1x00/mirage_ts.c
deleted file mode 100644
index 0942dcf6951..00000000000
--- a/arch/mips/au1000/db1x00/mirage_ts.c
+++ /dev/null
@@ -1,260 +0,0 @@
-/*
- * linux/arch/mips/au1000/db1x00/mirage_ts.c
- *
- * BRIEF MODULE DESCRIPTION
- *	Glue between Mirage board-specific touchscreen pieces
- *	and generic Wolfson Codec touchscreen support.
- *
- *	Based on pb1100_ts.c used in Hydrogen II.
- *
- * Copyright (c) 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/wait.h>
-
-#include <asm/segment.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/delay.h>
-#include <asm/au1000.h>
-
-/*
- *  Imported interface to Wolfson Codec driver.
- */
-extern void *wm97xx_ts_get_handle(int which);
-extern int wm97xx_ts_ready(void* ts_handle);
-extern void wm97xx_ts_set_cal(void* ts_handle, int xscale, int xtrans, int yscale, int ytrans);
-extern u16 wm97xx_ts_get_ac97(void* ts_handle, u8 reg);
-extern void wm97xx_ts_set_ac97(void* ts_handle, u8 reg, u16 val);
-extern int wm97xx_ts_read_data(void* ts_handle, long* x, long* y, long* pressure);
-extern void wm97xx_ts_send_data(void* ts_handle, long x, long y, long z);
-
-int wm97xx_comodule_present = 1;
-
-
-#define TS_NAME "mirage_ts"
-
-#define err(format, arg...) printk(KERN_ERR TS_NAME ": " format "\n" , ## arg)
-#define info(format, arg...) printk(KERN_INFO TS_NAME ": " format "\n" , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING TS_NAME ": " format "\n" , ## arg)
-#define DPRINTK(format, arg...) printk("%s: " format "\n", __FUNCTION__ , ## arg)
-
-
-#define PEN_DOWN_IRQ	AU1000_GPIO_7
-
-static struct task_struct *ts_task = 0;
-static DECLARE_COMPLETION(ts_complete);
-static DECLARE_WAIT_QUEUE_HEAD(pendown_wait);
-
-#ifdef CONFIG_WM97XX_FIVEWIRETS
-static int release_pressure = 1;
-#else
-static int release_pressure = 50;
-#endif
-
-typedef struct {
-   long x;
-   long y;
-} DOWN_EVENT;
-
-#define SAMPLE_RATE	50	/* samples per second */
-#define PEN_DEBOUNCE	5	/* samples for settling - fn of SAMPLE_RATE */
-#define PEN_UP_TIMEOUT	10	/* in seconds */
-#define PEN_UP_SETTLE	5	/* samples per second */
-
-static struct {
-	int xscale;
-	int xtrans;
-	int yscale;
-	int ytrans;
-} mirage_ts_cal =
-{
-#if 0
-	.xscale   = 84,
-	.xtrans = -157,
-	.yscale   = 66,
-	.ytrans = -150,
-#else
-	.xscale   = 84,
-	.xtrans = -150,
-	.yscale   = 66,
-	.ytrans = -146,
-#endif
-};
-
-
-static void pendown_irq(int irqnr, void *devid, struct pt_regs *regs)
-{
-//DPRINTK("got one 0x%x", au_readl(SYS_PINSTATERD));
-	wake_up(&pendown_wait);
-}
-
-static int ts_thread(void *id)
-{
-	static int pen_was_down = 0;
-	static DOWN_EVENT pen_xy;
-	long x, y, z;
-	void *ts;	/* handle */
-	struct task_struct *tsk = current;
-	int timeout = HZ / SAMPLE_RATE;
-
-	ts_task = tsk;
-
-	daemonize();
-	tsk->tty = NULL;
-	tsk->policy = SCHED_FIFO;
-	tsk->rt_priority = 1;
-	strcpy(tsk->comm, "touchscreen");
-
-	/* only want to receive SIGKILL */
-	spin_lock_irq(&tsk->sigmask_lock);
-	siginitsetinv(&tsk->blocked, sigmask(SIGKILL));
-	recalc_sigpending(tsk);
-	spin_unlock_irq(&tsk->sigmask_lock);
-
-	/* get handle for codec */
-	ts = wm97xx_ts_get_handle(0);
-
-	/* proceed only after everybody is ready */
-	wait_event_timeout(pendown_wait, wm97xx_ts_ready(ts), HZ/4);
-
-	/* board-specific calibration */
-	wm97xx_ts_set_cal(ts,
-			mirage_ts_cal.xscale,
-			mirage_ts_cal.xtrans,
-			mirage_ts_cal.yscale,
-			mirage_ts_cal.ytrans);
-
-	/* route Wolfson pendown interrupts to our GPIO */
-	au_sync();
-	wm97xx_ts_set_ac97(ts, 0x4c, wm97xx_ts_get_ac97(ts, 0x4c) & ~0x0008);
-	au_sync();
-	wm97xx_ts_set_ac97(ts, 0x56, wm97xx_ts_get_ac97(ts, 0x56) & ~0x0008);
-	au_sync();
-	wm97xx_ts_set_ac97(ts, 0x52, wm97xx_ts_get_ac97(ts, 0x52) | 0x2008);
-	au_sync();
-
-	for (;;) {
-		interruptible_sleep_on_timeout(&pendown_wait, timeout);
-		disable_irq(PEN_DOWN_IRQ);
-		if (signal_pending(tsk)) {
-			break;
-		}
-
-		/* read codec */
-		if (!wm97xx_ts_read_data(ts, &x, &y, &z))
-			z = 0;	/* treat no-data and pen-up the same */
-
-		if (signal_pending(tsk)) {
-			break;
-		}
-
-		if (z >= release_pressure) {
-			y = ~y;	/* top to bottom */
-			if (pen_was_down > 1 /*&& pen_was_down < PEN_DEBOUNCE*/) {//THXXX
-				/* bounce ? */
-				x = pen_xy.x;
-				y = pen_xy.y;
-				--pen_was_down;
-			} else if (pen_was_down <= 1) {
-				pen_xy.x = x;
-				pen_xy.y = y;
-				if (pen_was_down)
-					wm97xx_ts_send_data(ts, x, y, z);
-				pen_was_down = PEN_DEBOUNCE;
-			}
-			//wm97xx_ts_send_data(ts, x, y, z);
-			timeout = HZ / SAMPLE_RATE;
-		} else {
-			if (pen_was_down) {
-				if (--pen_was_down)
-					z = release_pressure;
-				else //THXXX
-				wm97xx_ts_send_data(ts, pen_xy.x, pen_xy.y, z);
-			}
-			/* The pendown signal takes some time to settle after
-			 * reading the pen pressure so wait a little
-			 * before enabling the pen.
-			 */
-			if (! pen_was_down) {
-//				interruptible_sleep_on_timeout(&pendown_wait, HZ / PEN_UP_SETTLE);
-				timeout = HZ * PEN_UP_TIMEOUT;
-			}
-		}
-		enable_irq(PEN_DOWN_IRQ);
-	}
-	enable_irq(PEN_DOWN_IRQ);
-	ts_task = NULL;
-	complete(&ts_complete);
-	return 0;
-}
-
-static int __init ts_mirage_init(void)
-{
-	int ret;
-
-	/* pen down signal is connected to GPIO 7 */
-
-	ret = request_irq(PEN_DOWN_IRQ, pendown_irq, 0, "ts-pendown", NULL);
-	if (ret) {
-		err("unable to get pendown irq%d: [%d]", PEN_DOWN_IRQ, ret);
-		return ret;
-	}
-
-	lock_kernel();
-	ret = kernel_thread(ts_thread, NULL, CLONE_FS | CLONE_FILES);
-	if (ret < 0) {
-		unlock_kernel();
-		return ret;
-	}
-	unlock_kernel();
-
-	info("Mirage touchscreen IRQ initialized.");
-
-	return 0;
-}
-
-static void __exit ts_mirage_exit(void)
-{
-	if (ts_task) {
-		send_sig(SIGKILL, ts_task, 1);
-		wait_for_completion(&ts_complete);
-	}
-
-	free_irq(PEN_DOWN_IRQ, NULL);
-}
-
-module_init(ts_mirage_init);
-module_exit(ts_mirage_exit);
-