summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
authorVitaly Bordug <vitb@kernel.crashing.org>2008-11-09 19:43:30 +0100
committerGreg Kroah-Hartman <gregkh@suse.de>2009-01-07 09:59:52 -0800
commit796bcae7361c28cf825780f6f1aac9dd3411394e (patch)
tree3fe4ee89e373bf29f868d70430098b7dc625c16f /arch
parentcd40c4c45eaedc289d2e1cc33b18a49a211f0f82 (diff)
USB: powerpc: Workaround for the PPC440EPX USBH_23 errata [take 3]
A published errata for ppc440epx states, that when running Linux with both EHCI and OHCI modules loaded, the EHCI module experiences a fatal error when a high-speed device is connected to the USB2.0, and functions normally if OHCI module is not loaded. There used to be recommendation to use only hi-speed or full-speed devices with specific conditions, when respective module was unloaded. Later, it was observed that ohci suspend is enough to keep things going, and it was turned into workaround, as explained below. Quote from original descriprion: The 440EPx USB 2.0 Host controller is an EHCI compliant controller. In USB 2.0 Host controllers, each EHCI controller has one or more companion controllers, which may be OHCI or UHCI. An USB 2.0 Host controller will contain one or more ports. For each port, only one of the controllers is connected at any one time. In the 440EPx, there is only one OHCI companion controller, and only one USB 2.0 Host port. All ports on an USB 2.0 controller default to the companion controller. If you load only an ohci driver, it will have control of the ports and any deviceplugged in will operate, although high speed devices will be forced to operate at full speed. When an ehci driver is loaded, it explicitly takes control of the ports. If there is a device connected, and / or every time there is a new device connected, the ehci driver determines if the device is high speed or not. If it is high speed, the driver retains control of the port. If it is not, the driver explicitly gives the companion controller control of the port. The is a software workaround that uses Initial version of the software workaround was posted to linux-usb-devel: http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg54019.html and later available from amcc.com: http://www.amcc.com/Embedded/Downloads/download.html?cat=1&family=15&ins=2 The patch below is generally based on the latter, but reworked to powerpc/of_device USB drivers, and uses a few devicetree inquiries to get rid of (some) hardcoded defines. Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org> Signed-off-by: Stefan Roese <sr@denx.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/boot/dts/sequoia.dts2
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 3b295e8df53..43cc68bd319 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -134,7 +134,7 @@
};
USB1: usb@e0000400 {
- compatible = "ohci-be";
+ compatible = "ibm,usb-ohci-440epx", "ohci-be";
reg = <0x00000000 0xe0000400 0x00000060>;
interrupt-parent = <&UIC0>;
interrupts = <0x15 0x8>;