diff options
author | Viresh Kumar <viresh.kumar@linaro.org> | 2013-04-04 18:24:25 +0530 |
---|---|---|
committer | Rafael J. Wysocki <rafael.j.wysocki@intel.com> | 2013-06-07 13:44:39 +0200 |
commit | 7fb6a53db58c729ff470095371f431b6d66c527b (patch) | |
tree | 57379088a169748c4335cbce7c5b76ab616d8392 /arch | |
parent | 7a4b35082c0f6997cb32b67a9cde169ec8e64706 (diff) |
cpufreq: powerpc: move cpufreq driver to drivers/cpufreq
Move cpufreq driver of powerpc platform to drivers/cpufreq.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/platforms/Kconfig | 31 | ||||
-rw-r--r-- | arch/powerpc/platforms/pasemi/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/pasemi/cpufreq.c | 331 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/Makefile | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_32.c | 721 | ||||
-rw-r--r-- | arch/powerpc/platforms/powermac/cpufreq_64.c | 746 |
6 files changed, 0 insertions, 1832 deletions
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index b62aab3e22e..e17cdfc5ba4 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -193,37 +193,6 @@ config PPC_IO_WORKAROUNDS source "drivers/cpufreq/Kconfig" -menu "CPU Frequency drivers" - depends on CPU_FREQ - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on PPC_PMAC && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC_PASEMI_CPUFREQ - bool "Support for PA Semi PWRficient" - depends on PPC_PASEMI - default y - select CPU_FREQ_TABLE - help - This adds the support for frequency switching on PA Semi - PWRficient processors. - -endmenu - menu "CPUIdle driver" source "drivers/cpuidle/Kconfig" diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index ce6d789e074..8e8d4cae5eb 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,3 +1,2 @@ obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o -obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c deleted file mode 100644 index b704da40406..00000000000 --- a/arch/powerpc/platforms/pasemi/cpufreq.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * Copyright (C) 2007 PA Semi, Inc - * - * Authors: Egor Martovetsky <egor@pasemi.com> - * Olof Johansson <olof@lixom.net> - * - * Maintained by: Olof Johansson <olof@lixom.net> - * - * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: - * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include <linux/cpufreq.h> -#include <linux/timer.h> -#include <linux/module.h> - -#include <asm/hw_irq.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/time.h> -#include <asm/smp.h> - -#define SDCASR_REG 0x0100 -#define SDCASR_REG_STRIDE 0x1000 -#define SDCPWR_CFGA0_REG 0x0100 -#define SDCPWR_PWST0_REG 0x0000 -#define SDCPWR_GIZTIME_REG 0x0440 - -/* SDCPWR_GIZTIME_REG fields */ -#define SDCPWR_GIZTIME_GR 0x80000000 -#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff - -/* Offset of ASR registers from SDC base */ -#define SDCASR_OFFSET 0x120000 - -static void __iomem *sdcpwr_mapbase; -static void __iomem *sdcasr_mapbase; - -static DEFINE_MUTEX(pas_switch_mutex); - -/* Current astate, is used when waking up from power savings on - * one core, in case the other core has switched states during - * the idle time. - */ -static int current_astate; - -/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ -static struct cpufreq_frequency_table pas_freqs[] = { - {0, 0}, - {1, 0}, - {2, 0}, - {3, 0}, - {4, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr *pas_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* - * hardware specific functions - */ - -static int get_astate_freq(int astate) -{ - u32 ret; - ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); - - return ret & 0x3f; -} - -static int get_cur_astate(int cpu) -{ - u32 ret; - - ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); - ret = (ret >> (cpu * 4)) & 0x7; - - return ret; -} - -static int get_gizmo_latency(void) -{ - u32 giztime, ret; - - giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); - - /* just provide the upper bound */ - if (giztime & SDCPWR_GIZTIME_GR) - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; - else - ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; - - return ret; -} - -static void set_astate(int cpu, unsigned int astate) -{ - unsigned long flags; - - /* Return if called before init has run */ - if (unlikely(!sdcasr_mapbase)) - return; - - local_irq_save(flags); - - out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); - - local_irq_restore(flags); -} - -int check_astate(void) -{ - return get_cur_astate(hard_smp_processor_id()); -} - -void restore_astate(int cpu) -{ - set_astate(cpu, current_astate); -} - -/* - * cpufreq functions - */ - -static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - const u32 *max_freqp; - u32 max_freq; - int i, cur_astate; - struct resource res; - struct device_node *cpu, *dn; - int err = -ENODEV; - - cpu = of_get_cpu_node(policy->cpu, NULL); - - if (!cpu) - goto out; - - dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-sdc"); - if (!dn) - goto out; - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out; - sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); - if (!sdcasr_mapbase) { - err = -EINVAL; - goto out; - } - - dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); - if (!dn) - dn = of_find_compatible_node(NULL, NULL, - "pasemi,pwrficient-gizmo"); - if (!dn) { - err = -ENODEV; - goto out_unmap_sdcasr; - } - err = of_address_to_resource(dn, 0, &res); - of_node_put(dn); - if (err) - goto out_unmap_sdcasr; - sdcpwr_mapbase = ioremap(res.start, 0x1000); - if (!sdcpwr_mapbase) { - err = -EINVAL; - goto out_unmap_sdcasr; - } - - pr_debug("init cpufreq on CPU %d\n", policy->cpu); - - max_freqp = of_get_property(cpu, "clock-frequency", NULL); - if (!max_freqp) { - err = -EINVAL; - goto out_unmap_sdcpwr; - } - - /* we need the freq in kHz */ - max_freq = *max_freqp / 1000; - - pr_debug("max clock-frequency is at %u kHz\n", max_freq); - pr_debug("initializing frequency table\n"); - - /* initialize frequency table */ - for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - pas_freqs[i].frequency = - get_astate_freq(pas_freqs[i].driver_data) * 100000; - pr_debug("%d: %d\n", i, pas_freqs[i].frequency); - } - - policy->cpuinfo.transition_latency = get_gizmo_latency(); - - cur_astate = get_cur_astate(policy->cpu); - pr_debug("current astate is at %d\n",cur_astate); - - policy->cur = pas_freqs[cur_astate].frequency; - cpumask_copy(policy->cpus, cpu_online_mask); - - ppc_proc_freq = policy->cur * 1000ul; - - cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); - - /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max - * are set correctly - */ - return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); - -out_unmap_sdcpwr: - iounmap(sdcpwr_mapbase); - -out_unmap_sdcasr: - iounmap(sdcasr_mapbase); -out: - return err; -} - -static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) -{ - /* - * We don't support CPU hotplug. Don't unmap after the system - * has already made it to a running state. - */ - if (system_state != SYSTEM_BOOTING) - return 0; - - if (sdcasr_mapbase) - iounmap(sdcasr_mapbase); - if (sdcpwr_mapbase) - iounmap(sdcpwr_mapbase); - - cpufreq_frequency_table_put_attr(policy->cpu); - return 0; -} - -static int pas_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pas_freqs); -} - -static int pas_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - struct cpufreq_freqs freqs; - int pas_astate_new; - int i; - - cpufreq_frequency_table_target(policy, - pas_freqs, - target_freq, - relation, - &pas_astate_new); - - freqs.old = policy->cur; - freqs.new = pas_freqs[pas_astate_new].frequency; - - mutex_lock(&pas_switch_mutex); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - - pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", - policy->cpu, - pas_freqs[pas_astate_new].frequency, - pas_freqs[pas_astate_new].driver_data); - - current_astate = pas_astate_new; - - for_each_online_cpu(i) - set_astate(i, pas_astate_new); - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - mutex_unlock(&pas_switch_mutex); - - ppc_proc_freq = freqs.new * 1000ul; - return 0; -} - -static struct cpufreq_driver pas_cpufreq_driver = { - .name = "pas-cpufreq", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = pas_cpufreq_cpu_init, - .exit = pas_cpufreq_cpu_exit, - .verify = pas_cpufreq_verify, - .target = pas_cpufreq_target, - .attr = pas_cpu_freqs_attr, -}; - -/* - * module init and destoy - */ - -static int __init pas_cpufreq_init(void) -{ - if (!of_machine_is_compatible("PA6T-1682M") && - !of_machine_is_compatible("pasemi,pwrficient")) - return -ENODEV; - - return cpufreq_register_driver(&pas_cpufreq_driver); -} - -static void __exit pas_cpufreq_exit(void) -{ - cpufreq_unregister_driver(&pas_cpufreq_driver); -} - -module_init(pas_cpufreq_init); -module_exit(pas_cpufreq_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index ea47df66fee..52c6ce1cc98 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -9,8 +9,6 @@ obj-y += pic.o setup.o time.o feature.o pci.o \ sleep.o low_i2c.o cache.o pfunc_core.o \ pfunc_base.o udbg_scc.o udbg_adb.o obj-$(CONFIG_PMAC_BACKLIGHT) += backlight.o -obj-$(CONFIG_CPU_FREQ_PMAC) += cpufreq_32.o -obj-$(CONFIG_CPU_FREQ_PMAC64) += cpufreq_64.o # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really # need this to be a bool. Cheat here and pretend CONFIG_NVRAM=m is really # CONFIG_NVRAM=y diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c deleted file mode 100644 index 3104fad8248..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ /dev/null @@ -1,721 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * TODO: Need a big cleanup here. Basically, we need to have different - * cpufreq_driver structures for the different type of HW instead of the - * current mess. We also need to better deal with the detection of the - * type of machine. - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/hardirq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/pmac_feature.h> -#include <asm/mmu_context.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/mpic.h> -#include <asm/keylargo.h> -#include <asm/switch_to.h> - -/* WARNING !!! This will cause calibrate_delay() to be called, - * but this is an __init function ! So you MUST go edit - * init/main.c to make it non-init before enabling DEBUG_FREQ - */ -#undef DEBUG_FREQ - -extern void low_choose_7447a_dfs(int dfs); -extern void low_choose_750fx_pll(int pll); -extern void low_sleep_handler(void); - -/* - * Currently, PowerMac cpufreq supports only high & low frequencies - * that are set by the firmware - */ -static unsigned int low_freq; -static unsigned int hi_freq; -static unsigned int cur_freq; -static unsigned int sleep_freq; -static unsigned long transition_latency; - -/* - * Different models uses different mechanisms to switch the frequency - */ -static int (*set_speed_proc)(int low_speed); -static unsigned int (*get_speed_proc)(void); - -/* - * Some definitions used by the various speedprocs - */ -static u32 voltage_gpio; -static u32 frequency_gpio; -static u32 slew_done_gpio; -static int no_schedule; -static int has_cpu_l2lve; -static int is_pmu_based; - -/* There are only two frequency states for each processor. Values - * are in kHz for the time being. - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table pmac_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* pmac_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static inline void local_delay(unsigned long ms) -{ - if (no_schedule) - mdelay(ms); - else - msleep(ms); -} - -#ifdef DEBUG_FREQ -static inline void debug_calc_bogomips(void) -{ - /* This will cause a recalc of bogomips and display the - * result. We backup/restore the value to avoid affecting the - * core cpufreq framework's own calculation. - */ - unsigned long save_lpj = loops_per_jiffy; - calibrate_delay(); - loops_per_jiffy = save_lpj; -} -#endif /* DEBUG_FREQ */ - -/* Switch CPU speed under 750FX CPU control - */ -static int cpu_750fx_cpu_speed(int low_speed) -{ - u32 hid2; - - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(10); - - /* tweak L2 for high voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 &= ~0x2000; - mtspr(SPRN_HID2, hid2); - } - } -#ifdef CONFIG_6xx - low_choose_750fx_pll(low_speed); -#endif - if (low_speed == 1) { - /* tweak L2 for low voltage */ - if (has_cpu_l2lve) { - hid2 = mfspr(SPRN_HID2); - hid2 |= 0x2000; - mtspr(SPRN_HID2, hid2); - } - - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(10); - } - - return 0; -} - -static unsigned int cpu_750fx_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_PS) - return low_freq; - else - return hi_freq; -} - -/* Switch CPU speed using DFS */ -static int dfs_set_cpu_speed(int low_speed) -{ - if (low_speed == 0) { - /* ramping up, set voltage first */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Make sure we sleep for at least 1ms */ - local_delay(1); - } - - /* set frequency */ -#ifdef CONFIG_6xx - low_choose_7447a_dfs(low_speed); -#endif - udelay(100); - - if (low_speed == 1) { - /* ramping down, set voltage last */ - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - local_delay(1); - } - - return 0; -} - -static unsigned int dfs_get_cpu_speed(void) -{ - if (mfspr(SPRN_HID1) & HID1_DFS) - return low_freq; - else - return hi_freq; -} - - -/* Switch CPU speed using slewing GPIOs - */ -static int gpios_set_cpu_speed(int low_speed) -{ - int gpio, timeout = 0; - - /* If ramping up, set voltage first */ - if (low_speed == 0) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - - /* Set frequency */ - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - if (low_speed == ((gpio & 0x01) == 0)) - goto skip; - - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, - low_speed ? 0x04 : 0x05); - udelay(200); - do { - if (++timeout > 100) - break; - local_delay(1); - gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); - } while((gpio & 0x02) == 0); - skip: - /* If ramping down, set voltage last */ - if (low_speed == 1) { - pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); - /* Delay is way too big but it's ok, we schedule */ - local_delay(10); - } - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - return 0; -} - -/* Switch CPU speed under PMU control - */ -static int pmu_set_cpu_speed(int low_speed) -{ - struct adb_request req; - unsigned long save_l2cr; - unsigned long save_l3cr; - unsigned int pic_prio; - unsigned long flags; - - preempt_disable(); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); -#endif - pmu_suspend(); - - /* Disable all interrupt sources on openpic */ - pic_prio = mpic_cpu_get_priority(); - mpic_cpu_set_priority(0xf); - - /* Make sure the decrementer won't interrupt us */ - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - /* Make sure any pending DEC interrupt occurring while we did - * the above didn't re-enable the DEC */ - mb(); - asm volatile("mtdec %0" : : "r" (0x7fffffff)); - - /* We can now disable MSR_EE */ - local_irq_save(flags); - - /* Giveup the FPU & vec */ - enable_kernel_fp(); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - enable_kernel_altivec(); -#endif /* CONFIG_ALTIVEC */ - - /* Save & disable L2 and L3 caches */ - save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ - save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ - - /* Send the new speed command. My assumption is that this command - * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep - */ - pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); - while (!req.complete) - pmu_poll(); - - /* Prepare the northbridge for the speed transition */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); - - /* Call low level code to backup CPU state and recover from - * hardware reset - */ - low_sleep_handler(); - - /* Restore the northbridge */ - pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); - - /* Restore L2 cache */ - if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) - _set_L2CR(save_l2cr); - /* Restore L3 cache */ - if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) - _set_L3CR(save_l3cr); - - /* Restore userland MMU context */ - switch_mmu_context(NULL, current->active_mm); - -#ifdef DEBUG_FREQ - printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); -#endif - - /* Restore low level PMU operations */ - pmu_unlock(); - - /* - * Restore decrementer; we'll take a decrementer interrupt - * as soon as interrupts are re-enabled and the generic - * clockevents code will reprogram it with the right value. - */ - set_dec(1); - - /* Restore interrupts */ - mpic_cpu_set_priority(pic_prio); - - /* Let interrupts flow again ... */ - local_irq_restore(flags); - -#ifdef DEBUG_FREQ - debug_calc_bogomips(); -#endif - - pmu_resume(); - - preempt_enable(); - - return 0; -} - -static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode, - int notify) -{ - struct cpufreq_freqs freqs; - unsigned long l3cr; - static unsigned long prev_l3cr; - - freqs.old = cur_freq; - freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - if (freqs.old == freqs.new) - return 0; - - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - if (speed_mode == CPUFREQ_LOW && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if (l3cr & L3CR_L3E) { - prev_l3cr = l3cr; - _set_L3CR(0); - } - } - set_speed_proc(speed_mode == CPUFREQ_LOW); - if (speed_mode == CPUFREQ_HIGH && - cpu_has_feature(CPU_FTR_L3CR)) { - l3cr = _get_L3CR(); - if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) - _set_L3CR(prev_l3cr); - } - if (notify) - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; - - return 0; -} - -static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) -{ - return cur_freq; -} - -static int pmac_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs); -} - -static int pmac_cpufreq_target( struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int newstate = 0; - int rc; - - if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - rc = do_set_cpu_speed(policy, newstate, 1); - - ppc_proc_freq = cur_freq * 1000ul; - return rc; -} - -static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -ENODEV; - - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = cur_freq; - - cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs); -} - -static u32 read_gpio(struct device_node *np) -{ - const u32 *reg = of_get_property(np, "reg", NULL); - u32 offset; - - if (reg == NULL) - return 0; - /* That works for all keylargos but shall be fixed properly - * some day... The problem is that it seems we can't rely - * on the "reg" property of the GPIO nodes, they are either - * relative to the base of KeyLargo or to the base of the - * GPIO space, and the device-tree doesn't help. - */ - offset = *reg; - if (offset < KEYLARGO_GPIO_LEVELS0) - offset += KEYLARGO_GPIO_LEVELS0; - return offset; -} - -static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) -{ - /* Ok, this could be made a bit smarter, but let's be robust for now. We - * always force a speed change to high speed before sleep, to make sure - * we have appropriate voltage and/or bus speed for the wakeup process, - * and to make sure our loops_per_jiffies are "good enough", that is will - * not cause too short delays if we sleep in low speed and wake in high - * speed.. - */ - no_schedule = 1; - sleep_freq = cur_freq; - if (cur_freq == low_freq && !is_pmu_based) - do_set_cpu_speed(policy, CPUFREQ_HIGH, 0); - return 0; -} - -static int pmac_cpufreq_resume(struct cpufreq_policy *policy) -{ - /* If we resume, first check if we have a get() function */ - if (get_speed_proc) - cur_freq = get_speed_proc(); - else - cur_freq = 0; - - /* We don't, hrm... we don't really know our speed here, best - * is that we force a switch to whatever it was, which is - * probably high speed due to our suspend() routine - */ - do_set_cpu_speed(policy, sleep_freq == low_freq ? - CPUFREQ_LOW : CPUFREQ_HIGH, 0); - - ppc_proc_freq = cur_freq * 1000ul; - - no_schedule = 0; - return 0; -} - -static struct cpufreq_driver pmac_cpufreq_driver = { - .verify = pmac_cpufreq_verify, - .target = pmac_cpufreq_target, - .get = pmac_cpufreq_get_speed, - .init = pmac_cpufreq_cpu_init, - .suspend = pmac_cpufreq_suspend, - .resume = pmac_cpufreq_resume, - .flags = CPUFREQ_PM_NO_WARN, - .attr = pmac_cpu_freqs_attr, - .name = "powermac", - .owner = THIS_MODULE, -}; - - -static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np = of_find_node_by_name(NULL, - "voltage-gpio"); - struct device_node *freq_gpio_np = of_find_node_by_name(NULL, - "frequency-gpio"); - struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, - "slewing-done"); - const u32 *value; - - /* - * Check to see if it's GPIO driven or PMU only - * - * The way we extract the GPIO address is slightly hackish, but it - * works well enough for now. We need to abstract the whole GPIO - * stuff sooner or later anyway - */ - - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (freq_gpio_np) - frequency_gpio = read_gpio(freq_gpio_np); - if (slew_done_gpio_np) - slew_done_gpio = read_gpio(slew_done_gpio_np); - - /* If we use the frequency GPIOs, calculate the min/max speeds based - * on the bus frequencies - */ - if (frequency_gpio && slew_done_gpio) { - int lenp, rc; - const u32 *freqs, *ratio; - - freqs = of_get_property(cpunode, "bus-frequencies", &lenp); - lenp /= sizeof(u32); - if (freqs == NULL || lenp != 2) { - printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); - return 1; - } - ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", - NULL); - if (ratio == NULL) { - printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); - return 1; - } - - /* Get the min/max bus frequencies */ - low_freq = min(freqs[0], freqs[1]); - hi_freq = max(freqs[0], freqs[1]); - - /* Grrrr.. It _seems_ that the device-tree is lying on the low bus - * frequency, it claims it to be around 84Mhz on some models while - * it appears to be approx. 101Mhz on all. Let's hack around here... - * fortunately, we don't need to be too precise - */ - if (low_freq < 98000000) - low_freq = 101000000; - - /* Convert those to CPU core clocks */ - low_freq = (low_freq * (*ratio)) / 2000; - hi_freq = (hi_freq * (*ratio)) / 2000; - - /* Now we get the frequencies, we read the GPIO to see what is out current - * speed - */ - rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); - cur_freq = (rc & 0x01) ? hi_freq : low_freq; - - set_speed_proc = gpios_set_cpu_speed; - return 1; - } - - /* If we use the PMU, look for the min & max frequencies in the - * device-tree - */ - value = of_get_property(cpunode, "min-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree - * here */ - if (low_freq < 100000) - low_freq *= 10; - - value = of_get_property(cpunode, "max-clock-frequency", NULL); - if (!value) - return 1; - hi_freq = (*value) / 1000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - - return 0; -} - -static int pmac_cpufreq_init_7447A(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - if (!voltage_gpio){ - printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n"); - return 1; - } - - /* OF only reports the high frequency */ - hi_freq = cur_freq; - low_freq = cur_freq/2; - - /* Read actual frequency from CPU */ - cur_freq = dfs_get_cpu_speed(); - set_speed_proc = dfs_set_cpu_speed; - get_speed_proc = dfs_get_cpu_speed; - - return 0; -} - -static int pmac_cpufreq_init_750FX(struct device_node *cpunode) -{ - struct device_node *volt_gpio_np; - u32 pvr; - const u32 *value; - - if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) - return 1; - - hi_freq = cur_freq; - value = of_get_property(cpunode, "reduced-clock-frequency", NULL); - if (!value) - return 1; - low_freq = (*value) / 1000; - - volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); - if (volt_gpio_np) - voltage_gpio = read_gpio(volt_gpio_np); - - pvr = mfspr(SPRN_PVR); - has_cpu_l2lve = !((pvr & 0xf00) == 0x100); - - set_speed_proc = cpu_750fx_cpu_speed; - get_speed_proc = cpu_750fx_get_cpu_speed; - cur_freq = cpu_750fx_get_cpu_speed(); - - return 0; -} - -/* Currently, we support the following machines: - * - * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) - * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) - * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) - * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) - * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) - * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) - * - Recent MacRISC3 laptops - * - All new machines with 7447A CPUs - */ -static int __init pmac_cpufreq_setup(void) -{ - struct device_node *cpunode; - const u32 *value; - - if (strstr(cmd_line, "nocpufreq")) - return 0; - - /* Assume only one CPU */ - cpunode = of_find_node_by_type(NULL, "cpu"); - if (!cpunode) - goto out; - - /* Get current cpu clock freq */ - value = of_get_property(cpunode, "clock-frequency", NULL); - if (!value) - goto out; - cur_freq = (*value) / 1000; - transition_latency = CPUFREQ_ETERNAL; - - /* Check for 7447A based MacRISC3 */ - if (of_machine_is_compatible("MacRISC3") && - of_get_property(cpunode, "dynamic-power-step", NULL) && - PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { - pmac_cpufreq_init_7447A(cpunode); - transition_latency = 8000000; - /* Check for other MacRISC3 machines */ - } else if (of_machine_is_compatible("PowerBook3,4") || - of_machine_is_compatible("PowerBook3,5") || - of_machine_is_compatible("MacRISC3")) { - pmac_cpufreq_init_MacRISC3(cpunode); - /* Else check for iBook2 500/600 */ - } else if (of_machine_is_compatible("PowerBook4,1")) { - hi_freq = cur_freq; - low_freq = 400000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 550 */ - else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { - hi_freq = cur_freq; - low_freq = 500000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for TiPb 400 & 500 */ - else if (of_machine_is_compatible("PowerBook3,2")) { - /* We only know about the 400 MHz and the 500Mhz model - * they both have 300 MHz as low frequency - */ - if (cur_freq < 350000 || cur_freq > 550000) - goto out; - hi_freq = cur_freq; - low_freq = 300000; - set_speed_proc = pmu_set_cpu_speed; - is_pmu_based = 1; - } - /* Else check for 750FX */ - else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) - pmac_cpufreq_init_750FX(cpunode); -out: - of_node_put(cpunode); - if (set_speed_proc == NULL) - return -ENODEV; - - pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; - pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; - ppc_proc_freq = cur_freq * 1000ul; - - printk(KERN_INFO "Registering PowerMac CPU frequency driver\n"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", - low_freq/1000, hi_freq/1000, cur_freq/1000); - - return cpufreq_register_driver(&pmac_cpufreq_driver); -} - -module_init(pmac_cpufreq_setup); - diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c deleted file mode 100644 index 7ba423431cf..00000000000 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ /dev/null @@ -1,746 +0,0 @@ -/* - * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> - * and Markus Demleitner <msdemlei@cl.uni-heidelberg.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs, - * that is iMac G5 and latest single CPU desktop. - */ - -#undef DEBUG - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/cpufreq.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/mutex.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/irq.h> -#include <asm/sections.h> -#include <asm/cputable.h> -#include <asm/time.h> -#include <asm/smu.h> -#include <asm/pmac_pfunc.h> - -#define DBG(fmt...) pr_debug(fmt) - -/* see 970FX user manual */ - -#define SCOM_PCR 0x0aa001 /* PCR scom addr */ - -#define PCR_HILO_SELECT 0x80000000U /* 1 = PCR, 0 = PCRH */ -#define PCR_SPEED_FULL 0x00000000U /* 1:1 speed value */ -#define PCR_SPEED_HALF 0x00020000U /* 1:2 speed value */ -#define PCR_SPEED_QUARTER 0x00040000U /* 1:4 speed value */ -#define PCR_SPEED_MASK 0x000e0000U /* speed mask */ -#define PCR_SPEED_SHIFT 17 -#define PCR_FREQ_REQ_VALID 0x00010000U /* freq request valid */ -#define PCR_VOLT_REQ_VALID 0x00008000U /* volt request valid */ -#define PCR_TARGET_TIME_MASK 0x00006000U /* target time */ -#define PCR_STATLAT_MASK 0x00001f00U /* STATLAT value */ -#define PCR_SNOOPLAT_MASK 0x000000f0U /* SNOOPLAT value */ -#define PCR_SNOOPACC_MASK 0x0000000fU /* SNOOPACC value */ - -#define SCOM_PSR 0x408001 /* PSR scom addr */ -/* warning: PSR is a 64 bits register */ -#define PSR_CMD_RECEIVED 0x2000000000000000U /* command received */ -#define PSR_CMD_COMPLETED 0x1000000000000000U /* command completed */ -#define PSR_CUR_SPEED_MASK 0x0300000000000000U /* current speed */ -#define PSR_CUR_SPEED_SHIFT (56) - -/* - * The G5 only supports two frequencies (Quarter speed is not supported) - */ -#define CPUFREQ_HIGH 0 -#define CPUFREQ_LOW 1 - -static struct cpufreq_frequency_table g5_cpu_freqs[] = { - {CPUFREQ_HIGH, 0}, - {CPUFREQ_LOW, 0}, - {0, CPUFREQ_TABLE_END}, -}; - -static struct freq_attr* g5_cpu_freqs_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -/* Power mode data is an array of the 32 bits PCR values to use for - * the various frequencies, retrieved from the device-tree - */ -static int g5_pmode_cur; - -static void (*g5_switch_volt)(int speed_mode); -static int (*g5_switch_freq)(int speed_mode); -static int (*g5_query_freq)(void); - -static DEFINE_MUTEX(g5_switch_mutex); - -static unsigned long transition_latency; - -#ifdef CONFIG_PMAC_SMU - -static const u32 *g5_pmode_data; -static int g5_pmode_max; - -static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ -static int g5_fvt_count; /* number of op. points */ -static int g5_fvt_cur; /* current op. point */ - -/* - * SMU based voltage switching for Neo2 platforms - */ - -static void g5_smu_switch_volt(int speed_mode) -{ - struct smu_simple_cmd cmd; - - DECLARE_COMPLETION_ONSTACK(comp); - smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete, - &comp, 'V', 'S', 'L', 'E', 'W', - 0xff, g5_fvt_cur+1, speed_mode); - wait_for_completion(&comp); -} - -/* - * Platform function based voltage/vdnap switching for Neo2 - */ - -static struct pmf_function *pfunc_set_vdnap0; -static struct pmf_function *pfunc_vdnap0_complete; - -static void g5_vdnap_switch_volt(int speed_mode) -{ - struct pmf_args args; - u32 slew, done = 0; - unsigned long timeout; - - slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0; - args.count = 1; - args.u[0].p = &slew; - - pmf_call_one(pfunc_set_vdnap0, &args); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_vdnap0_complete, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); -} - - -/* - * SCOM based frequency switching for 970FX rev3 - */ -static int g5_scom_switch_freq(int speed_mode) -{ - unsigned long flags; - int to; - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - local_irq_save(flags); - - /* Clear PCR high */ - scom970_write(SCOM_PCR, 0); - /* Clear PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0); - /* Set PCR low */ - scom970_write(SCOM_PCR, PCR_HILO_SELECT | - g5_pmode_data[speed_mode]); - - /* Wait for completion */ - for (to = 0; to < 10; to++) { - unsigned long psr = scom970_read(SCOM_PSR); - - if ((psr & PSR_CMD_RECEIVED) == 0 && - (((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3) - == 0) - break; - if (psr & PSR_CMD_COMPLETED) - break; - udelay(100); - } - - local_irq_restore(flags); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_scom_query_freq(void) -{ - unsigned long psr = scom970_read(SCOM_PSR); - int i; - - for (i = 0; i <= g5_pmode_max; i++) - if ((((psr >> PSR_CUR_SPEED_SHIFT) ^ - (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0) - break; - return i; -} - -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} - -#endif /* CONFIG_PMAC_SMU */ - -/* - * Platform function based voltage switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu0_volt_high; -static struct pmf_function *pfunc_cpu0_volt_low; -static struct pmf_function *pfunc_cpu1_volt_high; -static struct pmf_function *pfunc_cpu1_volt_low; - -static void g5_pfunc_switch_volt(int speed_mode) -{ - if (speed_mode == CPUFREQ_HIGH) { - if (pfunc_cpu0_volt_high) - pmf_call_one(pfunc_cpu0_volt_high, NULL); - if (pfunc_cpu1_volt_high) - pmf_call_one(pfunc_cpu1_volt_high, NULL); - } else { - if (pfunc_cpu0_volt_low) - pmf_call_one(pfunc_cpu0_volt_low, NULL); - if (pfunc_cpu1_volt_low) - pmf_call_one(pfunc_cpu1_volt_low, NULL); - } - msleep(10); /* should be faster , to fix */ -} - -/* - * Platform function based frequency switching for PowerMac7,2 & 7,3 - */ - -static struct pmf_function *pfunc_cpu_setfreq_high; -static struct pmf_function *pfunc_cpu_setfreq_low; -static struct pmf_function *pfunc_cpu_getfreq; -static struct pmf_function *pfunc_slewing_done; - -static int g5_pfunc_switch_freq(int speed_mode) -{ - struct pmf_args args; - u32 done = 0; - unsigned long timeout; - int rc; - - DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); - - /* If frequency is going up, first ramp up the voltage */ - if (speed_mode < g5_pmode_cur) - g5_switch_volt(speed_mode); - - /* Do it */ - if (speed_mode == CPUFREQ_HIGH) - rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); - else - rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); - - if (rc) - printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); - - /* It's an irq GPIO so we should be able to just block here, - * I'll do that later after I've properly tested the IRQ code for - * platform functions - */ - timeout = jiffies + HZ/10; - while(!time_after(jiffies, timeout)) { - args.count = 1; - args.u[0].p = &done; - pmf_call_one(pfunc_slewing_done, &args); - if (done) - break; - msleep(1); - } - if (done == 0) - printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n"); - - /* If frequency is going down, last ramp the voltage */ - if (speed_mode > g5_pmode_cur) - g5_switch_volt(speed_mode); - - g5_pmode_cur = speed_mode; - ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul; - - return 0; -} - -static int g5_pfunc_query_freq(void) -{ - struct pmf_args args; - u32 val = 0; - - args.count = 1; - args.u[0].p = &val; - pmf_call_one(pfunc_cpu_getfreq, &args); - return val ? CPUFREQ_HIGH : CPUFREQ_LOW; -} - - -/* - * Common interface to the cpufreq core - */ - -static int g5_cpufreq_verify(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, g5_cpu_freqs); -} - -static int g5_cpufreq_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned int newstate = 0; - struct cpufreq_freqs freqs; - int rc; - - if (cpufreq_frequency_table_target(policy, g5_cpu_freqs, - target_freq, relation, &newstate)) - return -EINVAL; - - if (g5_pmode_cur == newstate) - return 0; - - mutex_lock(&g5_switch_mutex); - - freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency; - freqs.new = g5_cpu_freqs[newstate].frequency; - - cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); - rc = g5_switch_freq(newstate); - cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); - - mutex_unlock(&g5_switch_mutex); - - return rc; -} - -static unsigned int g5_cpufreq_get_speed(unsigned int cpu) -{ - return g5_cpu_freqs[g5_pmode_cur].frequency; -} - -static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cpuinfo.transition_latency = transition_latency; - policy->cur = g5_cpu_freqs[g5_query_freq()].frequency; - /* secondary CPUs are tied to the primary one by the - * cpufreq core if in the secondary policy we tell it that - * it actually must be one policy together with all others. */ - cpumask_copy(policy->cpus, cpu_online_mask); - cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu); - - return cpufreq_frequency_table_cpuinfo(policy, - g5_cpu_freqs); -} - - -static struct cpufreq_driver g5_cpufreq_driver = { - .name = "powermac", - .owner = THIS_MODULE, - .flags = CPUFREQ_CONST_LOOPS, - .init = g5_cpufreq_cpu_init, - .verify = g5_cpufreq_verify, - .target = g5_cpufreq_target, - .get = g5_cpufreq_get_speed, - .attr = g5_cpu_freqs_attr, -}; - - -#ifdef CONFIG_PMAC_SMU - -static int __init g5_neo2_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpunode; - unsigned int psize, ssize; - unsigned long max_freq; - char *freq_method, *volt_method; - const u32 *valp; - u32 pvr_hi; - int use_volts_vdnap = 0; - int use_volts_smu = 0; - int rc = -ENODEV; - - /* Check supported platforms */ - if (of_machine_is_compatible("PowerMac8,1") || - of_machine_is_compatible("PowerMac8,2") || - of_machine_is_compatible("PowerMac9,1")) - use_volts_smu = 1; - else if (of_machine_is_compatible("PowerMac11,2")) - use_volts_vdnap = 1; - else - return -ENODEV; - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - const u32 *reg = of_get_property(cpunode, "reg", NULL); - if (reg == NULL || (*reg) != 0) - continue; - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n"); - return -ENODEV; - } - - /* Check 970FX for now */ - valp = of_get_property(cpunode, "cpu-version", NULL); - if (!valp) { - DBG("No cpu-version property !\n"); - goto bail_noprops; - } - pvr_hi = (*valp) >> 16; - if (pvr_hi != 0x3c && pvr_hi != 0x44) { - printk(KERN_ERR "cpufreq: Unsupported CPU version\n"); - goto bail_noprops; - } - - /* Look for the powertune data in the device-tree */ - g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); - if (!g5_pmode_data) { - DBG("No power-mode-data !\n"); - goto bail_noprops; - } - g5_pmode_max = psize / sizeof(u32) - 1; - - if (use_volts_smu) { - const struct smu_sdbp_header *shdr; - - /* Look for the FVT table */ - shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL); - if (!shdr) - goto bail_noprops; - g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1]; - ssize = (shdr->len * sizeof(u32)) - - sizeof(struct smu_sdbp_header); - g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt); - g5_fvt_cur = 0; - - /* Sanity checking */ - if (g5_fvt_count < 1 || g5_pmode_max < 1) - goto bail_noprops; - - g5_switch_volt = g5_smu_switch_volt; - volt_method = "SMU"; - } else if (use_volts_vdnap) { - struct device_node *root; - - root = of_find_node_by_path("/"); - if (root == NULL) { - printk(KERN_ERR "cpufreq: Can't find root of " - "device tree\n"); - goto bail_noprops; - } - pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0"); - pfunc_vdnap0_complete = - pmf_find_function(root, "slewing-done"); - if (pfunc_set_vdnap0 == NULL || - pfunc_vdnap0_complete == NULL) { - printk(KERN_ERR "cpufreq: Can't find required " - "platform function\n"); - goto bail_noprops; - } - - g5_switch_volt = g5_vdnap_switch_volt; - volt_method = "GPIO"; - } else { - g5_switch_volt = g5_dummy_switch_volt; - volt_method = "none"; - } - - /* - * From what I see, clock-frequency is always the maximal frequency. - * The current driver can not slew sysclk yet, so we really only deal - * with powertune steps for now. We also only implement full freq and - * half freq in this version. So far, I haven't yet seen a machine - * supporting anything else. - */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) - return -ENODEV; - max_freq = (*valp)/1000; - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = max_freq/2; - - /* Set callbacks */ - transition_latency = 12000; - g5_switch_freq = g5_scom_switch_freq; - g5_query_freq = g5_scom_query_freq; - freq_method = "SCOM"; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n", - freq_method, volt_method); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - - /* We keep the CPU node on hold... hopefully, Apple G5 don't have - * hotplug CPU with a dynamic device-tree ... - */ - return rc; - - bail_noprops: - of_node_put(cpunode); - - return rc; -} - -#endif /* CONFIG_PMAC_SMU */ - - -static int __init g5_pm72_cpufreq_init(struct device_node *cpus) -{ - struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; - const u8 *eeprom = NULL; - const u32 *valp; - u64 max_freq, min_freq, ih, il; - int has_volt = 1, rc = 0; - - DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" - " RackMac3,1...\n"); - - /* Get first CPU node */ - for (cpunode = NULL; - (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - if (!strcmp(cpunode->type, "cpu")) - break; - } - if (cpunode == NULL) { - printk(KERN_ERR "cpufreq: Can't find any CPU node\n"); - return -ENODEV; - } - - /* Lookup the cpuid eeprom node */ - cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); - if (cpuid != NULL) - eeprom = of_get_property(cpuid, "cpuid", NULL); - if (eeprom == NULL) { - printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); - rc = -ENODEV; - goto bail; - } - - /* Lookup the i2c hwclock */ - for (hwclock = NULL; - (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ - const char *loc = of_get_property(hwclock, - "hwctrl-location", NULL); - if (loc == NULL) - continue; - if (strcmp(loc, "CPU CLOCK")) - continue; - if (!of_get_property(hwclock, "platform-get-frequency", NULL)) - continue; - break; - } - if (hwclock == NULL) { - printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n"); - rc = -ENODEV; - goto bail; - } - - DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name); - - /* Now get all the platform functions */ - pfunc_cpu_getfreq = - pmf_find_function(hwclock, "get-frequency"); - pfunc_cpu_setfreq_high = - pmf_find_function(hwclock, "set-frequency-high"); - pfunc_cpu_setfreq_low = - pmf_find_function(hwclock, "set-frequency-low"); - pfunc_slewing_done = - pmf_find_function(hwclock, "slewing-done"); - pfunc_cpu0_volt_high = - pmf_find_function(hwclock, "set-voltage-high-0"); - pfunc_cpu0_volt_low = - pmf_find_function(hwclock, "set-voltage-low-0"); - pfunc_cpu1_volt_high = - pmf_find_function(hwclock, "set-voltage-high-1"); - pfunc_cpu1_volt_low = - pmf_find_function(hwclock, "set-voltage-low-1"); - - /* Check we have minimum requirements */ - if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL || - pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) { - printk(KERN_ERR "cpufreq: Can't find platform functions !\n"); - rc = -ENODEV; - goto bail; - } - - /* Check that we have complete sets */ - if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) { - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL; - has_volt = 0; - } - if (!has_volt || - pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) { - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL; - } - - /* Note: The device tree also contains a "platform-set-values" - * function for which I haven't quite figured out the usage. It - * might have to be called on init and/or wakeup, I'm not too sure - * but things seem to work fine without it so far ... - */ - - /* Get max frequency from device-tree */ - valp = of_get_property(cpunode, "clock-frequency", NULL); - if (!valp) { - printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); - rc = -ENODEV; - goto bail; - } - - max_freq = (*valp)/1000; - - /* Now calculate reduced frequency by using the cpuid input freq - * ratio. This requires 64 bits math unless we are willing to lose - * some precision - */ - ih = *((u32 *)(eeprom + 0x10)); - il = *((u32 *)(eeprom + 0x20)); - - /* Check for machines with no useful settings */ - if (il == ih) { - printk(KERN_WARNING "cpufreq: No low frequency mode available" - " on this model !\n"); - rc = -ENODEV; - goto bail; - } - - min_freq = 0; - if (ih != 0 && il != 0) - min_freq = (max_freq * il) / ih; - - /* Sanity check */ - if (min_freq >= max_freq || min_freq < 1000) { - printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENXIO; - goto bail; - } - g5_cpu_freqs[0].frequency = max_freq; - g5_cpu_freqs[1].frequency = min_freq; - - /* Set callbacks */ - transition_latency = CPUFREQ_ETERNAL; - g5_switch_volt = g5_pfunc_switch_volt; - g5_switch_freq = g5_pfunc_switch_freq; - g5_query_freq = g5_pfunc_query_freq; - - /* Force apply current frequency to make sure everything is in - * sync (voltage is right for example). Firmware may leave us with - * a strange setting ... - */ - g5_switch_volt(CPUFREQ_HIGH); - msleep(10); - g5_pmode_cur = -1; - g5_switch_freq(g5_query_freq()); - - printk(KERN_INFO "Registering G5 CPU frequency driver\n"); - printk(KERN_INFO "Frequency method: i2c/pfunc, " - "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none"); - printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n", - g5_cpu_freqs[1].frequency/1000, - g5_cpu_freqs[0].frequency/1000, - g5_cpu_freqs[g5_pmode_cur].frequency/1000); - - rc = cpufreq_register_driver(&g5_cpufreq_driver); - bail: - if (rc != 0) { - pmf_put_function(pfunc_cpu_getfreq); - pmf_put_function(pfunc_cpu_setfreq_high); - pmf_put_function(pfunc_cpu_setfreq_low); - pmf_put_function(pfunc_slewing_done); - pmf_put_function(pfunc_cpu0_volt_high); - pmf_put_function(pfunc_cpu0_volt_low); - pmf_put_function(pfunc_cpu1_volt_high); - pmf_put_function(pfunc_cpu1_volt_low); - } - of_node_put(hwclock); - of_node_put(cpuid); - of_node_put(cpunode); - - return rc; -} - -static int __init g5_cpufreq_init(void) -{ - struct device_node *cpus; - int rc = 0; - - cpus = of_find_node_by_path("/cpus"); - if (cpus == NULL) { - DBG("No /cpus node !\n"); - return -ENODEV; - } - - if (of_machine_is_compatible("PowerMac7,2") || - of_machine_is_compatible("PowerMac7,3") || - of_machine_is_compatible("RackMac3,1")) - rc = g5_pm72_cpufreq_init(cpus); -#ifdef CONFIG_PMAC_SMU - else - rc = g5_neo2_cpufreq_init(cpus); -#endif /* CONFIG_PMAC_SMU */ - - of_node_put(cpus); - return rc; -} - -module_init(g5_cpufreq_init); - - -MODULE_LICENSE("GPL"); |