Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...

23 files changed, 206 insertions, 56 deletions

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 2b1a166d41f..386c769c38d 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -213,5 +213,14 @@
 				status = "disabled";
 			};
 		};
+		nand@d8000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			compatible = "fsl,imx27-nand";
+			reg = <0xd8000000 0x1000>;
+			interrupts = <29>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index eb282378fa7..01abd3516a7 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -82,8 +82,6 @@ static int snappercl15_nand_dev_ready(struct mtd_info *mtd)
 	return !!(__raw_readw(NAND_CTRL_ADDR(chip)) & SNAPPERCL15_NAND_RDY);
 }
 
-static const char *snappercl15_nand_part_probes[] = {"cmdlinepart", NULL};
-
 static struct mtd_partition snappercl15_nand_parts[] = {
 	{
 		.name		= "Kernel",
@@ -100,10 +98,8 @@ static struct mtd_partition snappercl15_nand_parts[] = {
 static struct platform_nand_data snappercl15_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
-		.part_probe_types	= snappercl15_nand_part_probes,
 		.partitions		= snappercl15_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(snappercl15_nand_parts),
-		.options		= NAND_NO_AUTOINCR,
 		.chip_delay		= 25,
 	},
 	.ctrl = {
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index d4ef339d961..75cab2d7ec7 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -105,8 +105,6 @@ static int ts72xx_nand_device_ready(struct mtd_info *mtd)
 	return !!(__raw_readb(addr) & 0x20);
 }
 
-static const char *ts72xx_nand_part_probes[] = { "cmdlinepart", NULL };
-
 #define TS72XX_BOOTROM_PART_SIZE	(SZ_16K)
 #define TS72XX_REDBOOT_PART_SIZE	(SZ_2M + SZ_1M)
 
@@ -134,7 +132,6 @@ static struct platform_nand_data ts72xx_nand_data = {
 		.nr_chips	= 1,
 		.chip_offset	= 0,
 		.chip_delay	= 15,
-		.part_probe_types = ts72xx_nand_part_probes,
 		.partitions	= ts72xx_nand_parts,
 		.nr_partitions	= ARRAY_SIZE(ts72xx_nand_parts),
 	},
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ed38d03c61f..eee0cc8d92a 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -29,6 +29,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI2_BASE_ADDR, "imx27-cspi.1", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-cspi", MX27_CSPI3_BASE_ADDR, "imx27-cspi.2", NULL),
 	OF_DEV_AUXDATA("fsl,imx27-wdt", MX27_WDOG_BASE_ADDR, "imx2-wdt.0", NULL),
+	OF_DEV_AUXDATA("fsl,imx27-nand", MX27_NFC_BASE_ADDR, "mxc_nand.0", NULL),
 	{ /* sentinel */ }
 };
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 3d742aee177..108a9d3f382 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -60,8 +60,6 @@ static struct platform_device ixdp425_flash = {
 #if defined(CONFIG_MTD_NAND_PLATFORM) || \
     defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition ixdp425_partitions[] = {
 	{
 		.name	= "ixp400 NAND FS 0",
@@ -100,8 +98,6 @@ static struct platform_nand_data ixdp425_flash_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
 		.chip_delay		= 30,
-		.options		= NAND_NO_AUTOINCR,
-		.part_probe_types 	= part_probes,
 		.partitions	 	= ixdp425_partitions,
 		.nr_partitions	 	= ARRAY_SIZE(ixdp425_partitions),
 	},
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 58cacafcf66..2e8d3e176bc 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -111,7 +111,7 @@ static struct nomadik_nand_platform_data nhk8815_nand_data = {
 	.parts		= nhk8815_partitions,
 	.nparts		= ARRAY_SIZE(nhk8815_partitions),
 	.options	= NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
-			| NAND_NO_READRDY | NAND_NO_AUTOINCR,
+			| NAND_NO_READRDY,
 	.init		= nhk8815_nand_init,
 };
 
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index c7364fdbda0..6872f3fd400 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -192,14 +192,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 7e503686f7a..a28e989a63f 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -186,8 +186,6 @@ static int h2_nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
 }
 
-static const char *h2_part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data h2_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -195,7 +193,6 @@ static struct platform_nand_data h2_nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
 		.partitions		= h2_nand_partitions,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= h2_part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 9fb03f189d9..108a8640fc6 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -188,8 +188,6 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -197,7 +195,6 @@ static struct platform_nand_data nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(nand_partitions),
 		.partitions		= nand_partitions,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index f2cb24387c2..703d55ecffe 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -150,14 +150,11 @@ static int nand_dev_ready(struct mtd_info *mtd)
 	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
 }
 
-static const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct platform_nand_data nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
 		.chip_offset		= 0,
 		.options		= NAND_SAMSUNG_LP_OPTIONS,
-		.part_probe_types	= part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= omap1_nand_cmd_ctl,
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 46b09dae770..2286410671e 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -49,6 +49,7 @@
 #define GPMC_ECC_CONTROL	0x1f8
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
+#define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
 
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR		0x100
@@ -935,3 +936,186 @@ int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
+
+#ifdef CONFIG_ARCH_OMAP3
+
+/**
+ * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
+ * @cs: chip select number
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ *
+ * This function must be executed before any call to gpmc_enable_hwecc_bch.
+ */
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
+{
+	/* check if ecc module is in use */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	/* support only OMAP3 class */
+	if (!cpu_is_omap34xx()) {
+		printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+	 * Other chips may be added if confirmed to work.
+	 */
+	if ((nerrors == 4) &&
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+		printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
+		return -EINVAL;
+	}
+
+	/* sanity check */
+	if (nsectors > 8) {
+		printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
+		       nsectors);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
+
+/**
+ * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
+ * @cs: chip select number
+ * @mode: read/write mode
+ * @dev_width: device bus width(1 for x16, 0 for x8)
+ * @nsectors: how many 512-byte sectors to process
+ * @nerrors: how many errors to correct per sector (4 or 8)
+ */
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+			  int nerrors)
+{
+	unsigned int val;
+
+	/* check if ecc module is in use */
+	if (gpmc_ecc_used != -EINVAL)
+		return -EINVAL;
+
+	gpmc_ecc_used = cs;
+
+	/* clear ecc and enable bits */
+	gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (cs                       <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	gpmc_write_reg(GPMC_ECC_CONFIG, val);
+	gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
+
+/**
+ * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
+{
+	int i;
+	unsigned long nsectors, reg, val1, val2;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+		/* Read hw-computed remainder */
+		val1 = gpmc_read_reg(reg + 0);
+		val2 = gpmc_read_reg(reg + 4);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
+
+/**
+ * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
+ * @cs:  chip select number
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc: The ecc output buffer
+ */
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
+{
+	int i;
+	unsigned long nsectors, reg, val1, val2, val3, val4;
+
+	if (gpmc_ecc_used != cs)
+		return -EINVAL;
+
+	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
+
+		/* Read hw-computed remainder */
+		val1 = gpmc_read_reg(reg + 0);
+		val2 = gpmc_read_reg(reg + 4);
+		val3 = gpmc_read_reg(reg + 8);
+		val4 = gpmc_read_reg(reg + 12);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc++ = 0xef ^ (val4 & 0xFF);
+		*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc++ = 0xed ^ (val3 & 0xFF);
+		*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc++ = 0x97 ^ (val2 & 0xFF);
+		*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	gpmc_ecc_used = -EINVAL;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
+
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index a74f3cf54cc..b4203277f3c 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -251,8 +251,6 @@ static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
 		readsb(io_base, buf, len);
 }
 
-const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition ts78xx_ts_nand_parts[] = {
 	{
 		.name		= "mbr",
@@ -277,7 +275,6 @@ static struct mtd_partition ts78xx_ts_nand_parts[] = {
 static struct platform_nand_data ts78xx_ts_nand_data = {
 	.chip	= {
 		.nr_chips		= 1,
-		.part_probe_types	= ts_nand_part_probes,
 		.partitions		= ts78xx_ts_nand_parts,
 		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
 		.chip_delay		= 15,
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 56e8cebeb7d..9244493dbcb 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -679,8 +679,6 @@ static struct mtd_partition balloon3_partition_info[] = {
 	},
 };
 
-static const char *balloon3_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data balloon3_nand_pdata = {
 	.chip = {
 		.nr_chips	= 4,
@@ -688,7 +686,6 @@ struct platform_nand_data balloon3_nand_pdata = {
 		.nr_partitions	= ARRAY_SIZE(balloon3_partition_info),
 		.partitions	= balloon3_partition_info,
 		.chip_delay	= 50,
-		.part_probe_types = balloon3_part_probes,
 	},
 	.ctrl = {
 		.hwcontrol	= 0,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index a3a4a38d497..97f82ad341b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -338,8 +338,6 @@ static struct mtd_partition em_x270_partition_info[] = {
 	},
 };
 
-static const char *em_x270_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data em_x270_nand_platdata = {
 	.chip = {
 		.nr_chips = 1,
@@ -347,7 +345,6 @@ struct platform_nand_data em_x270_nand_platdata = {
 		.nr_partitions = ARRAY_SIZE(em_x270_partition_info),
 		.partitions = em_x270_partition_info,
 		.chip_delay = 20,
-		.part_probe_types = em_x270_part_probes,
 	},
 	.ctrl = {
 		.hwcontrol = 0,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 9507605ed54..0da35dccfd8 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -268,8 +268,6 @@ static struct mtd_partition palmtx_partition_info[] = {
 	},
 };
 
-static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
-
 struct platform_nand_data palmtx_nand_platdata = {
 	.chip	= {
 		.nr_chips		= 1,
@@ -277,7 +275,6 @@ struct platform_nand_data palmtx_nand_platdata = {
 		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
 		.partitions		= palmtx_partition_info,
 		.chip_delay		= 20,
-		.part_probe_types 	= palmtx_part_probes,
 	},
 	.ctrl	= {
 		.cmd_ctrl	= palmtx_nand_cmd_ctl,
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 1527929b445..f37764a3607 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -92,6 +92,8 @@ enum omap_ecc {
 	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
 		/* 1-bit ecc: stored at beginning of spare area as romcode */
 	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
 };
 
 /*
@@ -157,4 +159,13 @@ extern int gpmc_nand_write(int cs, int cmd, int wval);
 
 int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
 int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
+
+#ifdef CONFIG_ARCH_OMAP3
+int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
+int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
+			  int nerrors);
+int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
+int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
+#endif /* CONFIG_ARCH_OMAP3 */
+
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c
index f6ffd6f054c..0b74218fdd3 100644
--- a/arch/blackfin/mach-bf561/boards/acvilon.c
+++ b/arch/blackfin/mach-bf561/boards/acvilon.c
@@ -248,8 +248,6 @@ static struct platform_device bfin_uart0_device = {
 
 #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 
-const char *part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition bfin_plat_nand_partitions[] = {
 	{
 	 .name = "params(nand)",
@@ -289,7 +287,6 @@ static struct platform_nand_data bfin_plat_nand_data = {
 	.chip = {
 		 .nr_chips = 1,
 		 .chip_delay = 30,
-		 .part_probe_types = part_probes,
 		 .partitions = bfin_plat_nand_partitions,
 		 .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
 		 },
diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c
index 7dde01642d6..bf2248474fa 100644
--- a/arch/mips/alchemy/devboards/db1200.c
+++ b/arch/mips/alchemy/devboards/db1200.c
@@ -213,8 +213,6 @@ static int au1200_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1200_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1200_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -235,7 +233,6 @@ struct platform_nand_data db1200_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
 		.partitions	= db1200_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1200_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1200_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1300.c b/arch/mips/alchemy/devboards/db1300.c
index 0893f2af0d0..c56e0246694 100644
--- a/arch/mips/alchemy/devboards/db1300.c
+++ b/arch/mips/alchemy/devboards/db1300.c
@@ -145,8 +145,6 @@ static int au1300_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1300_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1300_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -167,7 +165,6 @@ struct platform_nand_data db1300_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1300_nand_parts),
 		.partitions	= db1300_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1300_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1300_nand_device_ready,
diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c
index 6815d0783cd..9eb79062f46 100644
--- a/arch/mips/alchemy/devboards/db1550.c
+++ b/arch/mips/alchemy/devboards/db1550.c
@@ -149,8 +149,6 @@ static int au1550_nand_device_ready(struct mtd_info *mtd)
 	return __raw_readl((void __iomem *)MEM_STSTAT) & 1;
 }
 
-static const char *db1550_part_probes[] = { "cmdlinepart", NULL };
-
 static struct mtd_partition db1550_nand_parts[] = {
 	{
 		.name	= "NAND FS 0",
@@ -171,7 +169,6 @@ struct platform_nand_data db1550_nand_platdata = {
 		.nr_partitions	= ARRAY_SIZE(db1550_nand_parts),
 		.partitions	= db1550_nand_parts,
 		.chip_delay	= 20,
-		.part_probe_types = db1550_part_probes,
 	},
 	.ctrl = {
 		.dev_ready	= au1550_nand_device_ready,
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index 87167dcc79f..05a1d922cd6 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -244,11 +244,6 @@ static struct platform_device pnx833x_sata_device = {
 	.resource      = pnx833x_sata_resources,
 };
 
-static const char *part_probes[] = {
-	"cmdlinepart",
-	NULL
-};
-
 static void
 pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 {
@@ -268,7 +263,6 @@ static struct platform_nand_data pnx833x_flash_nand_data = {
 	.chip = {
 		.nr_chips		= 1,
 		.chip_delay		= 25,
-		.part_probe_types 	= part_probes,
 	},
 	.ctrl = {
 		.cmd_ctrl 		= pnx833x_flash_nand_cmd_ctrl
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index ea774285e6c..716e9a12f0e 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -293,7 +293,6 @@ static void __init rb532_nand_setup(void)
 	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
 	rb532_nand_data.chip.partitions = rb532_partition_info;
 	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
-	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
 }
 
 
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 34cd0c5ff2e..a8a1ca741c8 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -188,7 +188,6 @@ static struct platform_nand_data migor_nand_flash_data = {
 		.partitions = migor_nand_flash_partitions,
 		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
 		.chip_delay = 20,
-		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
 	},
 	.ctrl = {
 		.dev_ready = migor_nand_flash_ready,