Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 976 insertions, 0 deletions

diff --git a/drivers/acpi/dispatcher/dswload.c b/drivers/acpi/dispatcher/dswload.c
new file mode 100644
index 00000000000..06d75867958
--- /dev/null
+++ b/drivers/acpi/dispatcher/dswload.c
@@ -0,0 +1,976 @@
+/******************************************************************************
+ *
+ * Module Name: dswload - Dispatcher namespace load callbacks
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2005, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+#include <acpi/acpi.h>
+#include <acpi/acparser.h>
+#include <acpi/amlcode.h>
+#include <acpi/acdispat.h>
+#include <acpi/acinterp.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acevents.h>
+
+#ifdef _ACPI_ASL_COMPILER
+#include <acpi/acdisasm.h>
+#endif
+
+#define _COMPONENT          ACPI_DISPATCHER
+	 ACPI_MODULE_NAME    ("dswload")
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_init_callbacks
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              pass_number     - 1, 2, or 3
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Init walk state callbacks
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_init_callbacks (
+	struct acpi_walk_state          *walk_state,
+	u32                             pass_number)
+{
+
+	switch (pass_number) {
+	case 1:
+		walk_state->parse_flags       = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load1_begin_op;
+		walk_state->ascending_callback = acpi_ds_load1_end_op;
+		break;
+
+	case 2:
+		walk_state->parse_flags       = ACPI_PARSE_LOAD_PASS1 | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_load2_begin_op;
+		walk_state->ascending_callback = acpi_ds_load2_end_op;
+		break;
+
+	case 3:
+#ifndef ACPI_NO_METHOD_EXECUTION
+		walk_state->parse_flags      |= ACPI_PARSE_EXECUTE  | ACPI_PARSE_DELETE_TREE;
+		walk_state->descending_callback = acpi_ds_exec_begin_op;
+		walk_state->ascending_callback = acpi_ds_exec_end_op;
+#endif
+		break;
+
+	default:
+		return (AE_BAD_PARAMETER);
+	}
+
+	return (AE_OK);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been reached in the
+ *                                walk;  Arguments have not been evaluated yet.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	acpi_object_type                object_type;
+	char                            *path;
+	u32                             flags;
+
+
+	ACPI_FUNCTION_NAME ("ds_load1_begin_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (op) {
+		if (!(walk_state->op_info->flags & AML_NAMED)) {
+#if 0
+			if ((walk_state->op_info->class == AML_CLASS_EXECUTE) ||
+				(walk_state->op_info->class == AML_CLASS_CONTROL)) {
+				acpi_os_printf ("\n\n***EXECUTABLE OPCODE %s***\n\n", walk_state->op_info->name);
+				*out_op = op;
+				return (AE_CTRL_SKIP);
+			}
+#endif
+			*out_op = op;
+			return (AE_OK);
+		}
+
+		/* Check if this object has already been installed in the namespace */
+
+		if (op->common.node) {
+			*out_op = op;
+			return (AE_OK);
+		}
+	}
+
+	path = acpi_ps_get_next_namestring (&walk_state->parser_state);
+
+	/* Map the raw opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"State=%p Op=%p [%s]\n", walk_state, op, acpi_ut_get_type_name (object_type)));
+
+	switch (walk_state->opcode) {
+	case AML_SCOPE_OP:
+
+		/*
+		 * The target name of the Scope() operator must exist at this point so
+		 * that we can actually open the scope to enter new names underneath it.
+		 * Allow search-to-root for single namesegs.
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+#ifdef _ACPI_ASL_COMPILER
+		if (status == AE_NOT_FOUND) {
+			/*
+			 * Table disassembly:
+			 * Target of Scope() not found.  Generate an External for it, and
+			 * insert the name into the namespace.
+			 */
+			acpi_dm_add_to_external_list (path);
+			status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+					   ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		}
+#endif
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (path, status);
+			return (status);
+		}
+
+		/*
+		 * Check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_LOCAL_SCOPE:         /* Scope  */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.  This
+			 * enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 *
+			 * Note: silently change the type here.  On the second pass, we will report a warning
+			 */
+
+			ACPI_DEBUG_PRINT ((ACPI_DB_INFO, "Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+				path, acpi_ut_get_type_name (node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s] (Cannot override)\n",
+				acpi_ut_get_type_name (node->type), path));
+
+			return (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+
+	default:
+
+		/*
+		 * For all other named opcodes, we will enter the name into the namespace.
+		 *
+		 * Setup the search flags.
+		 * Since we are entering a name into the namespace, we do not want to
+		 * enable the search-to-root upsearch.
+		 *
+		 * There are only two conditions where it is acceptable that the name
+		 * already exists:
+		 *    1) the Scope() operator can reopen a scoping object that was
+		 *       previously defined (Scope, Method, Device, etc.)
+		 *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
+		 *       buffer_field, or Package), the name of the object is already
+		 *       in the namespace.
+		 */
+		if (walk_state->deferred_node) {
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		flags = ACPI_NS_NO_UPSEARCH;
+		if ((walk_state->opcode != AML_SCOPE_OP) &&
+			(!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
+			flags |= ACPI_NS_ERROR_IF_FOUND;
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Cannot already exist\n",
+					acpi_ut_get_type_name (object_type)));
+		}
+		else {
+			ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "[%s] Both Find or Create allowed\n",
+					acpi_ut_get_type_name (object_type)));
+		}
+
+		/*
+		 * Enter the named type into the internal namespace.  We enter the name
+		 * as we go downward in the parse tree.  Any necessary subobjects that involve
+		 * arguments to the opcode must be created as we go back up the parse tree later.
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, path, object_type,
+				  ACPI_IMODE_LOAD_PASS1, flags, walk_state, &(node));
+		if (ACPI_FAILURE (status)) {
+			ACPI_REPORT_NSERROR (path, status);
+			return (status);
+		}
+		break;
+	}
+
+
+	/* Common exit */
+
+	if (!op) {
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op (walk_state->opcode);
+		if (!op) {
+			return (AE_NO_MEMORY);
+		}
+	}
+
+	/* Initialize */
+
+	op->named.name = node->name.integer;
+
+#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
+	op->named.path = (u8 *) path;
+#endif
+
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+	acpi_ps_append_arg (acpi_ps_get_parent_scope (&walk_state->parser_state), op);
+
+	*out_op = op;
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load1_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load1_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_object_type                object_type;
+	acpi_status                     status = AE_OK;
+
+
+	ACPI_FUNCTION_NAME ("ds_load1_end_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	/* We are only interested in opcodes that have an associated name */
+
+	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
+		return (AE_OK);
+	}
+
+	/* Get the object type to determine if we should pop the scope */
+
+	object_type = walk_state->op_info->object_type;
+
+#ifndef ACPI_NO_METHOD_EXECUTION
+	if (walk_state->op_info->flags & AML_FIELD) {
+		if (walk_state->opcode == AML_FIELD_OP         ||
+			walk_state->opcode == AML_BANK_FIELD_OP    ||
+			walk_state->opcode == AML_INDEX_FIELD_OP) {
+			status = acpi_ds_init_field_objects (op, walk_state);
+		}
+		return (status);
+	}
+
+
+	if (op->common.aml_opcode == AML_REGION_OP) {
+		status = acpi_ex_create_region (op->named.data, op->named.length,
+				   (acpi_adr_space_type) ((op->common.value.arg)->common.value.integer), walk_state);
+		if (ACPI_FAILURE (status)) {
+			return (status);
+		}
+	}
+#endif
+
+	if (op->common.aml_opcode == AML_NAME_OP) {
+		/* For Name opcode, get the object type from the argument */
+
+		if (op->common.value.arg) {
+			object_type = (acpi_ps_get_opcode_info ((op->common.value.arg)->common.aml_opcode))->object_type;
+			op->common.node->type = (u8) object_type;
+		}
+	}
+
+	if (op->common.aml_opcode == AML_METHOD_OP) {
+		/*
+		 * method_op pkg_length name_string method_flags term_list
+		 *
+		 * Note: We must create the method node/object pair as soon as we
+		 * see the method declaration.  This allows later pass1 parsing
+		 * of invocations of the method (need to know the number of
+		 * arguments.)
+		 */
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"LOADING-Method: State=%p Op=%p named_obj=%p\n",
+			walk_state, op, op->named.node));
+
+		if (!acpi_ns_get_attached_object (op->named.node)) {
+			walk_state->operands[0] = (void *) op->named.node;
+			walk_state->num_operands = 1;
+
+			status = acpi_ds_create_operands (walk_state, op->common.value.arg);
+			if (ACPI_SUCCESS (status)) {
+				status = acpi_ex_create_method (op->named.data,
+						   op->named.length, walk_state);
+			}
+			walk_state->operands[0] = NULL;
+			walk_state->num_operands = 0;
+
+			if (ACPI_FAILURE (status)) {
+				return (status);
+			}
+		}
+	}
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope (object_type)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s): Popping scope for Op %p\n",
+			acpi_ut_get_type_name (object_type), op));
+
+		status = acpi_ds_scope_stack_pop (walk_state);
+	}
+
+	return (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_begin_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been reached in the
+ *                                walk;  Arguments have not been evaluated yet.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Descending callback used during the loading of ACPI tables.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_begin_op (
+	struct acpi_walk_state          *walk_state,
+	union acpi_parse_object         **out_op)
+{
+	union acpi_parse_object         *op;
+	struct acpi_namespace_node      *node;
+	acpi_status                     status;
+	acpi_object_type                object_type;
+	char                            *buffer_ptr;
+
+
+	ACPI_FUNCTION_TRACE ("ds_load2_begin_op");
+
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op, walk_state));
+
+	if (op) {
+		/* We only care about Namespace opcodes here */
+
+		if ((!(walk_state->op_info->flags & AML_NSOPCODE) && (walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
+			(!(walk_state->op_info->flags & AML_NAMED))) {
+			return_ACPI_STATUS (AE_OK);
+		}
+
+		/*
+		 * Get the name we are going to enter or lookup in the namespace
+		 */
+		if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
+			/* For Namepath op, get the path string */
+
+			buffer_ptr = op->common.value.string;
+			if (!buffer_ptr) {
+				/* No name, just exit */
+
+				return_ACPI_STATUS (AE_OK);
+			}
+		}
+		else {
+			/* Get name from the op */
+
+			buffer_ptr = (char *) &op->named.name;
+		}
+	}
+	else {
+		/* Get the namestring from the raw AML */
+
+		buffer_ptr = acpi_ps_get_next_namestring (&walk_state->parser_state);
+	}
+
+	/* Map the opcode into an internal object type */
+
+	object_type = walk_state->op_info->object_type;
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"State=%p Op=%p Type=%X\n", walk_state, op, object_type));
+
+
+	switch (walk_state->opcode) {
+	case AML_FIELD_OP:
+	case AML_BANK_FIELD_OP:
+	case AML_INDEX_FIELD_OP:
+
+		node = NULL;
+		status = AE_OK;
+		break;
+
+	case AML_INT_NAMEPATH_OP:
+
+		/*
+		 * The name_path is an object reference to an existing object. Don't enter the
+		 * name into the namespace, but look it up for use later
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		break;
+
+	case AML_SCOPE_OP:
+
+		/*
+		 * The Path is an object reference to an existing object.  Don't enter the
+		 * name into the namespace, but look it up for use later
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT, walk_state, &(node));
+		if (ACPI_FAILURE (status)) {
+#ifdef _ACPI_ASL_COMPILER
+			if (status == AE_NOT_FOUND) {
+				status = AE_OK;
+			}
+			else {
+				ACPI_REPORT_NSERROR (buffer_ptr, status);
+			}
+#else
+			ACPI_REPORT_NSERROR (buffer_ptr, status);
+#endif
+			return_ACPI_STATUS (status);
+		}
+		/*
+		 * We must check to make sure that the target is
+		 * one of the opcodes that actually opens a scope
+		 */
+		switch (node->type) {
+		case ACPI_TYPE_LOCAL_SCOPE:         /* Scope */
+		case ACPI_TYPE_DEVICE:
+		case ACPI_TYPE_POWER:
+		case ACPI_TYPE_PROCESSOR:
+		case ACPI_TYPE_THERMAL:
+
+			/* These are acceptable types */
+			break;
+
+		case ACPI_TYPE_INTEGER:
+		case ACPI_TYPE_STRING:
+		case ACPI_TYPE_BUFFER:
+
+			/*
+			 * These types we will allow, but we will change the type.  This
+			 * enables some existing code of the form:
+			 *
+			 *  Name (DEB, 0)
+			 *  Scope (DEB) { ... }
+			 */
+
+			ACPI_REPORT_WARNING (("Type override - [%4.4s] had invalid type (%s) for Scope operator, changed to (Scope)\n",
+				buffer_ptr, acpi_ut_get_type_name (node->type)));
+
+			node->type = ACPI_TYPE_ANY;
+			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
+			break;
+
+		default:
+
+			/* All other types are an error */
+
+			ACPI_REPORT_ERROR (("Invalid type (%s) for target of Scope operator [%4.4s]\n",
+				acpi_ut_get_type_name (node->type), buffer_ptr));
+
+			return (AE_AML_OPERAND_TYPE);
+		}
+		break;
+
+	default:
+
+		/* All other opcodes */
+
+		if (op && op->common.node) {
+			/* This op/node was previously entered into the namespace */
+
+			node = op->common.node;
+
+			if (acpi_ns_opens_scope (object_type)) {
+				status = acpi_ds_scope_stack_push (node, object_type, walk_state);
+				if (ACPI_FAILURE (status)) {
+					return_ACPI_STATUS (status);
+				}
+
+			}
+			return_ACPI_STATUS (AE_OK);
+		}
+
+		/*
+		 * Enter the named type into the internal namespace.  We enter the name
+		 * as we go downward in the parse tree.  Any necessary subobjects that involve
+		 * arguments to the opcode must be created as we go back up the parse tree later.
+		 *
+		 * Note: Name may already exist if we are executing a deferred opcode.
+		 */
+		if (walk_state->deferred_node) {
+			/* This name is already in the namespace, get the node */
+
+			node = walk_state->deferred_node;
+			status = AE_OK;
+			break;
+		}
+
+		status = acpi_ns_lookup (walk_state->scope_info, buffer_ptr, object_type,
+				  ACPI_IMODE_EXECUTE, ACPI_NS_NO_UPSEARCH, walk_state, &(node));
+		break;
+	}
+
+	if (ACPI_FAILURE (status)) {
+		ACPI_REPORT_NSERROR (buffer_ptr, status);
+		return_ACPI_STATUS (status);
+	}
+
+
+	if (!op) {
+		/* Create a new op */
+
+		op = acpi_ps_alloc_op (walk_state->opcode);
+		if (!op) {
+			return_ACPI_STATUS (AE_NO_MEMORY);
+		}
+
+		/* Initialize the new op */
+
+		if (node) {
+			op->named.name = node->name.integer;
+		}
+		if (out_op) {
+			*out_op = op;
+		}
+	}
+
+	/*
+	 * Put the Node in the "op" object that the parser uses, so we
+	 * can get it again quickly when this scope is closed
+	 */
+	op->common.node = node;
+
+	return_ACPI_STATUS (status);
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ds_load2_end_op
+ *
+ * PARAMETERS:  walk_state      - Current state of the parse tree walk
+ *              Op              - Op that has been just been completed in the
+ *                                walk;  Arguments have now been evaluated.
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Ascending callback used during the loading of the namespace,
+ *              both control methods and everything else.
+ *
+ ******************************************************************************/
+
+acpi_status
+acpi_ds_load2_end_op (
+	struct acpi_walk_state          *walk_state)
+{
+	union acpi_parse_object         *op;
+	acpi_status                     status = AE_OK;
+	acpi_object_type                object_type;
+	struct acpi_namespace_node      *node;
+	union acpi_parse_object         *arg;
+	struct acpi_namespace_node      *new_node;
+#ifndef ACPI_NO_METHOD_EXECUTION
+	u32                             i;
+#endif
+
+
+	ACPI_FUNCTION_TRACE ("ds_load2_end_op");
+
+	op = walk_state->op;
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
+			walk_state->op_info->name, op, walk_state));
+
+	/* Only interested in opcodes that have namespace objects */
+
+	if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
+		return_ACPI_STATUS (AE_OK);
+	}
+
+	if (op->common.aml_opcode == AML_SCOPE_OP) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"Ending scope Op=%p State=%p\n", op, walk_state));
+	}
+
+
+	object_type = walk_state->op_info->object_type;
+
+	/*
+	 * Get the Node/name from the earlier lookup
+	 * (It was saved in the *op structure)
+	 */
+	node = op->common.node;
+
+	/*
+	 * Put the Node on the object stack (Contains the ACPI Name of
+	 * this object)
+	 */
+	walk_state->operands[0] = (void *) node;
+	walk_state->num_operands = 1;
+
+	/* Pop the scope stack */
+
+	if (acpi_ns_opens_scope (object_type) && (op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH, "(%s) Popping scope for Op %p\n",
+			acpi_ut_get_type_name (object_type), op));
+
+		status = acpi_ds_scope_stack_pop (walk_state);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+	}
+
+	/*
+	 * Named operations are as follows:
+	 *
+	 * AML_ALIAS
+	 * AML_BANKFIELD
+	 * AML_CREATEBITFIELD
+	 * AML_CREATEBYTEFIELD
+	 * AML_CREATEDWORDFIELD
+	 * AML_CREATEFIELD
+	 * AML_CREATEQWORDFIELD
+	 * AML_CREATEWORDFIELD
+	 * AML_DATA_REGION
+	 * AML_DEVICE
+	 * AML_EVENT
+	 * AML_FIELD
+	 * AML_INDEXFIELD
+	 * AML_METHOD
+	 * AML_METHODCALL
+	 * AML_MUTEX
+	 * AML_NAME
+	 * AML_NAMEDFIELD
+	 * AML_OPREGION
+	 * AML_POWERRES
+	 * AML_PROCESSOR
+	 * AML_SCOPE
+	 * AML_THERMALZONE
+	 */
+
+	ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+		"Create-Load [%s] State=%p Op=%p named_obj=%p\n",
+		acpi_ps_get_opcode_name (op->common.aml_opcode), walk_state, op, node));
+
+	/* Decode the opcode */
+
+	arg = op->common.value.arg;
+
+	switch (walk_state->op_info->type) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+
+	case AML_TYPE_CREATE_FIELD:
+
+		/*
+		 * Create the field object, but the field buffer and index must
+		 * be evaluated later during the execution phase
+		 */
+		status = acpi_ds_create_buffer_field (op, walk_state);
+		break;
+
+
+	 case AML_TYPE_NAMED_FIELD:
+
+		switch (op->common.aml_opcode) {
+		case AML_INDEX_FIELD_OP:
+
+			status = acpi_ds_create_index_field (op, (acpi_handle) arg->common.node,
+					   walk_state);
+			break;
+
+		case AML_BANK_FIELD_OP:
+
+			status = acpi_ds_create_bank_field (op, arg->common.node, walk_state);
+			break;
+
+		case AML_FIELD_OP:
+
+			status = acpi_ds_create_field (op, arg->common.node, walk_state);
+			break;
+
+		default:
+			/* All NAMED_FIELD opcodes must be handled above */
+			break;
+		}
+		break;
+
+
+	 case AML_TYPE_NAMED_SIMPLE:
+
+		status = acpi_ds_create_operands (walk_state, arg);
+		if (ACPI_FAILURE (status)) {
+			goto cleanup;
+		}
+
+		switch (op->common.aml_opcode) {
+		case AML_PROCESSOR_OP:
+
+			status = acpi_ex_create_processor (walk_state);
+			break;
+
+		case AML_POWER_RES_OP:
+
+			status = acpi_ex_create_power_resource (walk_state);
+			break;
+
+		case AML_MUTEX_OP:
+
+			status = acpi_ex_create_mutex (walk_state);
+			break;
+
+		case AML_EVENT_OP:
+
+			status = acpi_ex_create_event (walk_state);
+			break;
+
+		case AML_DATA_REGION_OP:
+
+			status = acpi_ex_create_table_region (walk_state);
+			break;
+
+		case AML_ALIAS_OP:
+
+			status = acpi_ex_create_alias (walk_state);
+			break;
+
+		default:
+			/* Unknown opcode */
+
+			status = AE_OK;
+			goto cleanup;
+		}
+
+		/* Delete operands */
+
+		for (i = 1; i < walk_state->num_operands; i++) {
+			acpi_ut_remove_reference (walk_state->operands[i]);
+			walk_state->operands[i] = NULL;
+		}
+
+		break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+	case AML_TYPE_NAMED_COMPLEX:
+
+		switch (op->common.aml_opcode) {
+#ifndef ACPI_NO_METHOD_EXECUTION
+		case AML_REGION_OP:
+			/*
+			 * The op_region is not fully parsed at this time. Only valid argument is the space_id.
+			 * (We must save the address of the AML of the address and length operands)
+			 */
+			/*
+			 * If we have a valid region, initialize it
+			 * Namespace is NOT locked at this point.
+			 */
+			status = acpi_ev_initialize_region (acpi_ns_get_attached_object (node), FALSE);
+			if (ACPI_FAILURE (status)) {
+				/*
+				 *  If AE_NOT_EXIST is returned, it is not fatal
+				 *  because many regions get created before a handler
+				 *  is installed for said region.
+				 */
+				if (AE_NOT_EXIST == status) {
+					status = AE_OK;
+				}
+			}
+			break;
+
+
+		case AML_NAME_OP:
+
+			status = acpi_ds_create_node (walk_state, node, op);
+			break;
+#endif /* ACPI_NO_METHOD_EXECUTION */
+
+
+		default:
+			/* All NAMED_COMPLEX opcodes must be handled above */
+			/* Note: Method objects were already created in Pass 1 */
+			break;
+		}
+		break;
+
+
+	case AML_CLASS_INTERNAL:
+
+		/* case AML_INT_NAMEPATH_OP: */
+		break;
+
+
+	case AML_CLASS_METHOD_CALL:
+
+		ACPI_DEBUG_PRINT ((ACPI_DB_DISPATCH,
+			"RESOLVING-method_call: State=%p Op=%p named_obj=%p\n",
+			walk_state, op, node));
+
+		/*
+		 * Lookup the method name and save the Node
+		 */
+		status = acpi_ns_lookup (walk_state->scope_info, arg->common.value.string,
+				  ACPI_TYPE_ANY, ACPI_IMODE_LOAD_PASS2,
+				  ACPI_NS_SEARCH_PARENT | ACPI_NS_DONT_OPEN_SCOPE,
+				  walk_state, &(new_node));
+		if (ACPI_SUCCESS (status)) {
+			/*
+			 * Make sure that what we found is indeed a method
+			 * We didn't search for a method on purpose, to see if the name would resolve
+			 */
+			if (new_node->type != ACPI_TYPE_METHOD) {
+				status = AE_AML_OPERAND_TYPE;
+			}
+
+			/* We could put the returned object (Node) on the object stack for later, but
+			 * for now, we will put it in the "op" object that the parser uses, so we
+			 * can get it again at the end of this scope
+			 */
+			op->common.node = new_node;
+		}
+		else {
+			ACPI_REPORT_NSERROR (arg->common.value.string, status);
+		}
+		break;
+
+
+	default:
+		break;
+	}
+
+cleanup:
+
+	/* Remove the Node pushed at the very beginning */
+
+	walk_state->operands[0] = NULL;
+	walk_state->num_operands = 0;
+	return_ACPI_STATUS (status);
+}
+
+