summaryrefslogtreecommitdiffstats
path: root/drivers/acpi
diff options
context:
space:
mode:
authorLen Brown <len.brown@intel.com>2009-01-09 04:01:26 -0500
committerLen Brown <len.brown@intel.com>2009-01-09 04:56:56 -0500
commitd97c0defba25a959a990f6d4759f43075540832e (patch)
tree27dceaf310e01a6bbcceee3550112b19202f142f /drivers/acpi
parentec9f168fcc344d2ffec1c8c822076bf22dab5c33 (diff)
parentb4f9fe12157a33351d0df78e925dcacd13252783 (diff)
Merge branch 'drivers-platform' into release
Conflicts: drivers/misc/Kconfig Signed-off-by: Len Brown <len.brown@intel.com>
Diffstat (limited to 'drivers/acpi')
-rw-r--r--drivers/acpi/Kconfig84
-rw-r--r--drivers/acpi/Makefile3
-rw-r--r--drivers/acpi/asus_acpi.c1460
-rw-r--r--drivers/acpi/toshiba_acpi.c863
-rw-r--r--drivers/acpi/wmi.c747
5 files changed, 0 insertions, 3157 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index b0243fd55ac..d7f9839ba26 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -196,90 +196,6 @@ config ACPI_NUMA
depends on (X86 || IA64)
default y if IA64_GENERIC || IA64_SGI_SN2
-config ACPI_WMI
- tristate "WMI (EXPERIMENTAL)"
- depends on X86
- depends on EXPERIMENTAL
- help
- This driver adds support for the ACPI-WMI (Windows Management
- Instrumentation) mapper device (PNP0C14) found on some systems.
-
- ACPI-WMI is a proprietary extension to ACPI to expose parts of the
- ACPI firmware to userspace - this is done through various vendor
- defined methods and data blocks in a PNP0C14 device, which are then
- made available for userspace to call.
-
- The implementation of this in Linux currently only exposes this to
- other kernel space drivers.
-
- This driver is a required dependency to build the firmware specific
- drivers needed on many machines, including Acer and HP laptops.
-
- It is safe to enable this driver even if your DSDT doesn't define
- any ACPI-WMI devices.
-
-config ACPI_ASUS
- tristate "ASUS/Medion Laptop Extras"
- depends on X86
- select BACKLIGHT_CLASS_DEVICE
- ---help---
- This driver provides support for extra features of ACPI-compatible
- ASUS laptops. As some of Medion laptops are made by ASUS, it may also
- support some Medion laptops (such as 9675 for example). It makes all
- the extra buttons generate standard ACPI events that go through
- /proc/acpi/events, and (on some models) adds support for changing the
- display brightness and output, switching the LCD backlight on and off,
- and most importantly, allows you to blink those fancy LEDs intended
- for reporting mail and wireless status.
-
- Note: display switching code is currently considered EXPERIMENTAL,
- toying with these values may even lock your machine.
-
- All settings are changed via /proc/acpi/asus directory entries. Owner
- and group for these entries can be set with asus_uid and asus_gid
- parameters.
-
- More information and a userspace daemon for handling the extra buttons
- at <http://sourceforge.net/projects/acpi4asus/>.
-
- If you have an ACPI-compatible ASUS laptop, say Y or M here. This
- driver is still under development, so if your laptop is unsupported or
- something works not quite as expected, please use the mailing list
- available on the above page (acpi4asus-user@lists.sourceforge.net).
-
- NOTE: This driver is deprecated and will probably be removed soon,
- use asus-laptop instead.
-
-config ACPI_TOSHIBA
- tristate "Toshiba Laptop Extras"
- depends on X86 && INPUT
- select INPUT_POLLDEV
- select NET
- select RFKILL
- select BACKLIGHT_CLASS_DEVICE
- ---help---
- This driver adds support for access to certain system settings
- on "legacy free" Toshiba laptops. These laptops can be recognized by
- their lack of a BIOS setup menu and APM support.
-
- On these machines, all system configuration is handled through the
- ACPI. This driver is required for access to controls not covered
- by the general ACPI drivers, such as LCD brightness, video output,
- etc.
-
- This driver differs from the non-ACPI Toshiba laptop driver (located
- under "Processor type and features") in several aspects.
- Configuration is accessed by reading and writing text files in the
- /proc tree instead of by program interface to /dev. Furthermore, no
- power management functions are exposed, as those are handled by the
- general ACPI drivers.
-
- More information about this driver is available at
- <http://memebeam.org/toys/ToshibaAcpiDriver>.
-
- If you have a legacy free Toshiba laptop (such as the Libretto L1
- series), say Y.
-
config ACPI_CUSTOM_DSDT_FILE
string "Custom DSDT Table file to include"
default ""
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 5d23c13ac7d..d80f4cc2e0d 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -55,9 +55,6 @@ obj-y += power.o
obj-$(CONFIG_ACPI_SYSTEM) += system.o event.o
obj-$(CONFIG_ACPI_DEBUG) += debug.o
obj-$(CONFIG_ACPI_NUMA) += numa.o
-obj-$(CONFIG_ACPI_WMI) += wmi.o
-obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
-obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
obj-$(CONFIG_ACPI_SBS) += sbshc.o
diff --git a/drivers/acpi/asus_acpi.c b/drivers/acpi/asus_acpi.c
deleted file mode 100644
index 1e74988c7b2..00000000000
--- a/drivers/acpi/asus_acpi.c
+++ /dev/null
@@ -1,1460 +0,0 @@
-/*
- * asus_acpi.c - Asus Laptop ACPI Extras
- *
- *
- * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * The development page for this driver is located at
- * http://sourceforge.net/projects/acpi4asus/
- *
- * Credits:
- * Pontus Fuchs - Helper functions, cleanup
- * Johann Wiesner - Small compile fixes
- * John Belmonte - ACPI code for Toshiba laptop was a good starting point.
- * �ic Burghard - LED display support for W1N
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <acpi/acpi_drivers.h>
-#include <acpi/acpi_bus.h>
-#include <asm/uaccess.h>
-
-#define ASUS_ACPI_VERSION "0.30"
-
-#define PROC_ASUS "asus" /* The directory */
-#define PROC_MLED "mled"
-#define PROC_WLED "wled"
-#define PROC_TLED "tled"
-#define PROC_BT "bluetooth"
-#define PROC_LEDD "ledd"
-#define PROC_INFO "info"
-#define PROC_LCD "lcd"
-#define PROC_BRN "brn"
-#define PROC_DISP "disp"
-
-#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver"
-#define ACPI_HOTK_CLASS "hotkey"
-#define ACPI_HOTK_DEVICE_NAME "Hotkey"
-
-/*
- * Some events we use, same for all Asus
- */
-#define BR_UP 0x10
-#define BR_DOWN 0x20
-
-/*
- * Flags for hotk status
- */
-#define MLED_ON 0x01 /* Mail LED */
-#define WLED_ON 0x02 /* Wireless LED */
-#define TLED_ON 0x04 /* Touchpad LED */
-#define BT_ON 0x08 /* Internal Bluetooth */
-
-MODULE_AUTHOR("Julien Lerouge, Karol Kozimor");
-MODULE_DESCRIPTION(ACPI_HOTK_NAME);
-MODULE_LICENSE("GPL");
-
-static uid_t asus_uid;
-static gid_t asus_gid;
-module_param(asus_uid, uint, 0);
-MODULE_PARM_DESC(asus_uid, "UID for entries in /proc/acpi/asus");
-module_param(asus_gid, uint, 0);
-MODULE_PARM_DESC(asus_gid, "GID for entries in /proc/acpi/asus");
-
-/* For each model, all features implemented,
- * those marked with R are relative to HOTK, A for absolute */
-struct model_data {
- char *name; /* name of the laptop________________A */
- char *mt_mled; /* method to handle mled_____________R */
- char *mled_status; /* node to handle mled reading_______A */
- char *mt_wled; /* method to handle wled_____________R */
- char *wled_status; /* node to handle wled reading_______A */
- char *mt_tled; /* method to handle tled_____________R */
- char *tled_status; /* node to handle tled reading_______A */
- char *mt_ledd; /* method to handle LED display______R */
- char *mt_bt_switch; /* method to switch Bluetooth on/off_R */
- char *bt_status; /* no model currently supports this__? */
- char *mt_lcd_switch; /* method to turn LCD on/off_________A */
- char *lcd_status; /* node to read LCD panel state______A */
- char *brightness_up; /* method to set brightness up_______A */
- char *brightness_down; /* method to set brightness down ____A */
- char *brightness_set; /* method to set absolute brightness_R */
- char *brightness_get; /* method to get absolute brightness_R */
- char *brightness_status;/* node to get brightness____________A */
- char *display_set; /* method to set video output________R */
- char *display_get; /* method to get video output________R */
-};
-
-/*
- * This is the main structure, we can use it to store anything interesting
- * about the hotk device
- */
-struct asus_hotk {
- struct acpi_device *device; /* the device we are in */
- acpi_handle handle; /* the handle of the hotk device */
- char status; /* status of the hotk, for LEDs */
- u32 ledd_status; /* status of the LED display */
- struct model_data *methods; /* methods available on the laptop */
- u8 brightness; /* brightness level */
- enum {
- A1x = 0, /* A1340D, A1300F */
- A2x, /* A2500H */
- A4G, /* A4700G */
- D1x, /* D1 */
- L2D, /* L2000D */
- L3C, /* L3800C */
- L3D, /* L3400D */
- L3H, /* L3H, L2000E, L5D */
- L4R, /* L4500R */
- L5x, /* L5800C */
- L8L, /* L8400L */
- M1A, /* M1300A */
- M2E, /* M2400E, L4400L */
- M6N, /* M6800N, W3400N */
- M6R, /* M6700R, A3000G */
- P30, /* Samsung P30 */
- S1x, /* S1300A, but also L1400B and M2400A (L84F) */
- S2x, /* S200 (J1 reported), Victor MP-XP7210 */
- W1N, /* W1000N */
- W5A, /* W5A */
- W3V, /* W3030V */
- xxN, /* M2400N, M3700N, M5200N, M6800N,
- S1300N, S5200N*/
- A4S, /* Z81sp */
- F3Sa, /* (Centrino) */
- END_MODEL
- } model; /* Models currently supported */
- u16 event_count[128]; /* Count for each event TODO make this better */
-};
-
-/* Here we go */
-#define A1x_PREFIX "\\_SB.PCI0.ISA.EC0."
-#define L3C_PREFIX "\\_SB.PCI0.PX40.ECD0."
-#define M1A_PREFIX "\\_SB.PCI0.PX40.EC0."
-#define P30_PREFIX "\\_SB.PCI0.LPCB.EC0."
-#define S1x_PREFIX "\\_SB.PCI0.PX40."
-#define S2x_PREFIX A1x_PREFIX
-#define xxN_PREFIX "\\_SB.PCI0.SBRG.EC0."
-
-static struct model_data model_conf[END_MODEL] = {
- /*
- * TODO I have seen a SWBX and AIBX method on some models, like L1400B,
- * it seems to be a kind of switch, but what for ?
- */
-
- {
- .name = "A1x",
- .mt_mled = "MLED",
- .mled_status = "\\MAIL",
- .mt_lcd_switch = A1x_PREFIX "_Q10",
- .lcd_status = "\\BKLI",
- .brightness_up = A1x_PREFIX "_Q0E",
- .brightness_down = A1x_PREFIX "_Q0F"},
-
- {
- .name = "A2x",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .wled_status = "\\SG66",
- .mt_lcd_switch = "\\Q10",
- .lcd_status = "\\BAOF",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "A4G",
- .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\ADVG"},
-
- {
- .name = "D1x",
- .mt_mled = "MLED",
- .mt_lcd_switch = "\\Q0D",
- .lcd_status = "\\GP11",
- .brightness_up = "\\Q0C",
- .brightness_down = "\\Q0B",
- .brightness_status = "\\BLVL",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "L2D",
- .mt_mled = "MLED",
- .mled_status = "\\SGP6",
- .mt_wled = "WLED",
- .wled_status = "\\RCP3",
- .mt_lcd_switch = "\\Q10",
- .lcd_status = "\\SGP0",
- .brightness_up = "\\Q0E",
- .brightness_down = "\\Q0F",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "L3C",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = L3C_PREFIX "_Q10",
- .lcd_status = "\\GL32",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\_SB.PCI0.PCI1.VGAC.NMAP"},
-
- {
- .name = "L3D",
- .mt_mled = "MLED",
- .mled_status = "\\MALD",
- .mt_wled = "WLED",
- .mt_lcd_switch = "\\Q10",
- .lcd_status = "\\BKLG",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "L3H",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = "EHK",
- .lcd_status = "\\_SB.PCI0.PM.PBC",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "L4R",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .wled_status = "\\_SB.PCI0.SBRG.SG13",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\_SB.PCI0.SBSM.SEO4",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
-
- {
- .name = "L5x",
- .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
- .mt_tled = "TLED",
- .mt_lcd_switch = "\\Q0D",
- .lcd_status = "\\BAOF",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "L8L"
-/* No features, but at least support the hotkeys */
- },
-
- {
- .name = "M1A",
- .mt_mled = "MLED",
- .mt_lcd_switch = M1A_PREFIX "Q10",
- .lcd_status = "\\PNOF",
- .brightness_up = M1A_PREFIX "Q0E",
- .brightness_down = M1A_PREFIX "Q0F",
- .brightness_status = "\\BRIT",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "M2E",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = "\\Q10",
- .lcd_status = "\\GP06",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "M6N",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .wled_status = "\\_SB.PCI0.SBRG.SG13",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\_SB.BKLT",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\SSTE"},
-
- {
- .name = "M6R",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\_SB.PCI0.SBSM.SEO4",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\_SB.PCI0.P0P1.VGA.GETD"},
-
- {
- .name = "P30",
- .mt_wled = "WLED",
- .mt_lcd_switch = P30_PREFIX "_Q0E",
- .lcd_status = "\\BKLT",
- .brightness_up = P30_PREFIX "_Q68",
- .brightness_down = P30_PREFIX "_Q69",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\DNXT"},
-
- {
- .name = "S1x",
- .mt_mled = "MLED",
- .mled_status = "\\EMLE",
- .mt_wled = "WLED",
- .mt_lcd_switch = S1x_PREFIX "Q10",
- .lcd_status = "\\PNOF",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV"},
-
- {
- .name = "S2x",
- .mt_mled = "MLED",
- .mled_status = "\\MAIL",
- .mt_lcd_switch = S2x_PREFIX "_Q10",
- .lcd_status = "\\BKLI",
- .brightness_up = S2x_PREFIX "_Q0B",
- .brightness_down = S2x_PREFIX "_Q0A"},
-
- {
- .name = "W1N",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_ledd = "SLCM",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\BKLT",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\ADVG"},
-
- {
- .name = "W5A",
- .mt_bt_switch = "BLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\ADVG"},
-
- {
- .name = "W3V",
- .mt_mled = "MLED",
- .mt_wled = "WLED",
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\BKLT",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\INFB"},
-
- {
- .name = "xxN",
- .mt_mled = "MLED",
-/* WLED present, but not controlled by ACPI */
- .mt_lcd_switch = xxN_PREFIX "_Q10",
- .lcd_status = "\\BKLT",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .display_set = "SDSP",
- .display_get = "\\ADVG"},
-
- {
- .name = "A4S",
- .brightness_set = "SPLV",
- .brightness_get = "GPLV",
- .mt_bt_switch = "BLED",
- .mt_wled = "WLED"
- },
-
- {
- .name = "F3Sa",
- .mt_bt_switch = "BLED",
- .mt_wled = "WLED",
- .mt_mled = "MLED",
- .brightness_get = "GPLV",
- .brightness_set = "SPLV",
- .mt_lcd_switch = "\\_SB.PCI0.SBRG.EC0._Q10",
- .lcd_status = "\\_SB.PCI0.SBRG.EC0.RPIN",
- .display_get = "\\ADVG",
- .display_set = "SDSP",
- },
-
-};
-
-/* procdir we use */
-static struct proc_dir_entry *asus_proc_dir;
-
-static struct backlight_device *asus_backlight_device;
-
-/*
- * This header is made available to allow proper configuration given model,
- * revision number , ... this info cannot go in struct asus_hotk because it is
- * available before the hotk
- */
-static struct acpi_table_header *asus_info;
-
-/* The actual device the driver binds to */
-static struct asus_hotk *hotk;
-
-/*
- * The hotkey driver and autoloading declaration
- */
-static int asus_hotk_add(struct acpi_device *device);
-static int asus_hotk_remove(struct acpi_device *device, int type);
-static const struct acpi_device_id asus_device_ids[] = {
- {"ATK0100", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, asus_device_ids);
-
-static struct acpi_driver asus_hotk_driver = {
- .name = "asus_acpi",
- .class = ACPI_HOTK_CLASS,
- .ids = asus_device_ids,
- .ops = {
- .add = asus_hotk_add,
- .remove = asus_hotk_remove,
- },
-};
-
-/*
- * This function evaluates an ACPI method, given an int as parameter, the
- * method is searched within the scope of the handle, can be NULL. The output
- * of the method is written is output, which can also be NULL
- *
- * returns 1 if write is successful, 0 else.
- */
-static int write_acpi_int(acpi_handle handle, const char *method, int val,
- struct acpi_buffer *output)
-{
- struct acpi_object_list params; /* list of input parameters (int) */
- union acpi_object in_obj; /* the only param we use */
- acpi_status status;
-
- params.count = 1;
- params.pointer = &in_obj;
- in_obj.type = ACPI_TYPE_INTEGER;
- in_obj.integer.value = val;
-
- status = acpi_evaluate_object(handle, (char *)method, &params, output);
- return (status == AE_OK);
-}
-
-static int read_acpi_int(acpi_handle handle, const char *method, int *val)
-{
- struct acpi_buffer output;
- union acpi_object out_obj;
- acpi_status status;
-
- output.length = sizeof(out_obj);
- output.pointer = &out_obj;
-
- status = acpi_evaluate_object(handle, (char *)method, NULL, &output);
- *val = out_obj.integer.value;
- return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
-}
-
-/*
- * We write our info in page, we begin at offset off and cannot write more
- * than count bytes. We set eof to 1 if we handle those 2 values. We return the
- * number of bytes written in page
- */
-static int
-proc_read_info(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- int len = 0;
- int temp;
- char buf[16]; /* enough for all info */
- /*
- * We use the easy way, we don't care of off and count,
- * so we don't set eof to 1
- */
-
- len += sprintf(page, ACPI_HOTK_NAME " " ASUS_ACPI_VERSION "\n");
- len += sprintf(page + len, "Model reference : %s\n",
- hotk->methods->name);
- /*
- * The SFUN method probably allows the original driver to get the list
- * of features supported by a given model. For now, 0x0100 or 0x0800
- * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
- * The significance of others is yet to be found.
- */
- if (read_acpi_int(hotk->handle, "SFUN", &temp))
- len +=
- sprintf(page + len, "SFUN value : 0x%04x\n", temp);
- /*
- * Another value for userspace: the ASYM method returns 0x02 for
- * battery low and 0x04 for battery critical, its readings tend to be
- * more accurate than those provided by _BST.
- * Note: since not all the laptops provide this method, errors are
- * silently ignored.
- */
- if (read_acpi_int(hotk->handle, "ASYM", &temp))
- len +=
- sprintf(page + len, "ASYM value : 0x%04x\n", temp);
- if (asus_info) {
- snprintf(buf, 16, "%d", asus_info->length);
- len += sprintf(page + len, "DSDT length : %s\n", buf);
- snprintf(buf, 16, "%d", asus_info->checksum);
- len += sprintf(page + len, "DSDT checksum : %s\n", buf);
- snprintf(buf, 16, "%d", asus_info->revision);
- len += sprintf(page + len, "DSDT revision : %s\n", buf);
- snprintf(buf, 7, "%s", asus_info->oem_id);
- len += sprintf(page + len, "OEM id : %s\n", buf);
- snprintf(buf, 9, "%s", asus_info->oem_table_id);
- len += sprintf(page + len, "OEM table id : %s\n", buf);
- snprintf(buf, 16, "%x", asus_info->oem_revision);
- len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
- snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
- len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
- snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
- len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
- }
-
- return len;
-}
-
-/*
- * /proc handlers
- * We write our info in page, we begin at offset off and cannot write more
- * than count bytes. We set eof to 1 if we handle those 2 values. We return the
- * number of bytes written in page
- */
-
-/* Generic LED functions */
-static int read_led(const char *ledname, int ledmask)
-{
- if (ledname) {
- int led_status;
-
- if (read_acpi_int(NULL, ledname, &led_status))
- return led_status;
- else
- printk(KERN_WARNING "Asus ACPI: Error reading LED "
- "status\n");
- }
- return (hotk->status & ledmask) ? 1 : 0;
-}
-
-static int parse_arg(const char __user *buf, unsigned long count, int *val)
-{
- char s[32];
- if (!count)
- return 0;
- if (count > 31)
- return -EINVAL;
- if (copy_from_user(s, buf, count))
- return -EFAULT;
- s[count] = 0;
- if (sscanf(s, "%i", val) != 1)
- return -EINVAL;
- return count;
-}
-
-/* FIXME: kill extraneous args so it can be called independently */
-static int
-write_led(const char __user *buffer, unsigned long count,
- char *ledname, int ledmask, int invert)
-{
- int rv, value;
- int led_out = 0;
-
- rv = parse_arg(buffer, count, &value);
- if (rv > 0)
- led_out = value ? 1 : 0;
-
- hotk->status =
- (led_out) ? (hotk->status | ledmask) : (hotk->status & ~ledmask);
-
- if (invert) /* invert target value */
- led_out = !led_out;
-
- if (!write_acpi_int(hotk->handle, ledname, led_out, NULL))
- printk(KERN_WARNING "Asus ACPI: LED (%s) write failed\n",
- ledname);
-
- return rv;
-}
-
-/*
- * Proc handlers for MLED
- */
-static int
-proc_read_mled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->mled_status, MLED_ON));
-}
-
-static int
-proc_write_mled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- return write_led(buffer, count, hotk->methods->mt_mled, MLED_ON, 1);
-}
-
-/*
- * Proc handlers for LED display
- */
-static int
-proc_read_ledd(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "0x%08x\n", hotk->ledd_status);
-}
-
-static int
-proc_write_ledd(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int rv, value;
-
- rv = parse_arg(buffer, count, &value);
- if (rv > 0) {
- if (!write_acpi_int
- (hotk->handle, hotk->methods->mt_ledd, value, NULL))
- printk(KERN_WARNING
- "Asus ACPI: LED display write failed\n");
- else
- hotk->ledd_status = (u32) value;
- }
- return rv;
-}
-
-/*
- * Proc handlers for WLED
- */
-static int
-proc_read_wled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->wled_status, WLED_ON));
-}
-
-static int
-proc_write_wled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- return write_led(buffer, count, hotk->methods->mt_wled, WLED_ON, 0);
-}
-
-/*
- * Proc handlers for Bluetooth
- */
-static int
-proc_read_bluetooth(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n", read_led(hotk->methods->bt_status, BT_ON));
-}
-
-static int
-proc_write_bluetooth(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- /* Note: mt_bt_switch controls both internal Bluetooth adapter's
- presence and its LED */
- return write_led(buffer, count, hotk->methods->mt_bt_switch, BT_ON, 0);
-}
-
-/*
- * Proc handlers for TLED
- */
-static int
-proc_read_tled(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n",
- read_led(hotk->methods->tled_status, TLED_ON));
-}
-
-static int
-proc_write_tled(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- return write_led(buffer, count, hotk->methods->mt_tled, TLED_ON, 0);
-}
-
-static int get_lcd_state(void)
-{
- int lcd = 0;
-
- if (hotk->model == L3H) {
- /* L3H and the like have to be handled differently */
- acpi_status status = 0;
- struct acpi_object_list input;
- union acpi_object mt_params[2];
- struct acpi_buffer output;
- union acpi_object out_obj;
-
- input.count = 2;
- input.pointer = mt_params;
- /* Note: the following values are partly guessed up, but
- otherwise they seem to work */
- mt_params[0].type = ACPI_TYPE_INTEGER;
- mt_params[0].integer.value = 0x02;
- mt_params[1].type = ACPI_TYPE_INTEGER;
- mt_params[1].integer.value = 0x02;
-
- output.length = sizeof(out_obj);
- output.pointer = &out_obj;
-
- status =
- acpi_evaluate_object(NULL, hotk->methods->lcd_status,
- &input, &output);
- if (status != AE_OK)
- return -1;
- if (out_obj.type == ACPI_TYPE_INTEGER)
- /* That's what the AML code does */
- lcd = out_obj.integer.value >> 8;
- } else if (hotk->model == F3Sa) {
- unsigned long long tmp;
- union acpi_object param;
- struct acpi_object_list input;
- acpi_status status;
-
- /* Read pin 11 */
- param.type = ACPI_TYPE_INTEGER;
- param.integer.value = 0x11;
- input.count = 1;
- input.pointer = &param;
-
- status = acpi_evaluate_integer(NULL, hotk->methods->lcd_status,
- &input, &tmp);
- if (status != AE_OK)
- return -1;
-
- lcd = tmp;
- } else {
- /* We don't have to check anything if we are here */
- if (!read_acpi_int(NULL, hotk->methods->lcd_status, &lcd))
- printk(KERN_WARNING
- "Asus ACPI: Error reading LCD status\n");
-
- if (hotk->model == L2D)
- lcd = ~lcd;
- }
-
- return (lcd & 1);
-}
-
-static int set_lcd_state(int value)
-{
- int lcd = 0;
- acpi_status status = 0;
-
- lcd = value ? 1 : 0;
- if (lcd != get_lcd_state()) {
- /* switch */
- if (hotk->model != L3H) {
- status =
- acpi_evaluate_object(NULL,
- hotk->methods->mt_lcd_switch,
- NULL, NULL);
- } else {
- /* L3H and the like must be handled differently */
- if (!write_acpi_int
- (hotk->handle, hotk->methods->mt_lcd_switch, 0x07,
- NULL))
- status = AE_ERROR;
- /* L3H's AML executes EHK (0x07) upon Fn+F7 keypress,
- the exact behaviour is simulated here */
- }
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING "Asus ACPI: Error switching LCD\n");
- }
- return 0;
-
-}
-
-static int
-proc_read_lcd(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n", get_lcd_state());
-}
-
-static int
-proc_write_lcd(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int rv, value;
-
- rv = parse_arg(buffer, count, &value);
- if (rv > 0)
- set_lcd_state(value);
- return rv;
-}
-
-static int read_brightness(struct backlight_device *bd)
-{
- int value;
-
- if (hotk->methods->brightness_get) { /* SPLV/GPLV laptop */
- if (!read_acpi_int(hotk->handle, hotk->methods->brightness_get,
- &value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading brightness\n");
- } else if (hotk->methods->brightness_status) { /* For D1 for example */
- if (!read_acpi_int(NULL, hotk->methods->brightness_status,
- &value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading brightness\n");
- } else /* No GPLV method */
- value = hotk->brightness;
- return value;
-}
-
-/*
- * Change the brightness level
- */
-static int set_brightness(int value)
-{
- acpi_status status = 0;
- int ret = 0;
-
- /* SPLV laptop */
- if (hotk->methods->brightness_set) {
- if (!write_acpi_int(hotk->handle, hotk->methods->brightness_set,
- value, NULL))
- printk(KERN_WARNING
- "Asus ACPI: Error changing brightness\n");
- ret = -EIO;
- goto out;
- }
-
- /* No SPLV method if we are here, act as appropriate */
- value -= read_brightness(NULL);
- while (value != 0) {
- status = acpi_evaluate_object(NULL, (value > 0) ?
- hotk->methods->brightness_up :
- hotk->methods->brightness_down,
- NULL, NULL);
- (value > 0) ? value-- : value++;
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING
- "Asus ACPI: Error changing brightness\n");
- ret = -EIO;
- }
-out:
- return ret;
-}
-
-static int set_brightness_status(struct backlight_device *bd)
-{
- return set_brightness(bd->props.brightness);
-}
-
-static int
-proc_read_brn(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- return sprintf(page, "%d\n", read_brightness(NULL));
-}
-
-static int
-proc_write_brn(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int rv, value;
-
- rv = parse_arg(buffer, count, &value);
- if (rv > 0) {
- value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
- /* 0 <= value <= 15 */
- set_brightness(value);
- }
- return rv;
-}
-
-static void set_display(int value)
-{
- /* no sanity check needed for now */
- if (!write_acpi_int(hotk->handle, hotk->methods->display_set,
- value, NULL))
- printk(KERN_WARNING "Asus ACPI: Error setting display\n");
- return;
-}
-
-/*
- * Now, *this* one could be more user-friendly, but so far, no-one has
- * complained. The significance of bits is the same as in proc_write_disp()
- */
-static int
-proc_read_disp(char *page, char **start, off_t off, int count, int *eof,
- void *data)
-{
- int value = 0;
-
- if (!read_acpi_int(hotk->handle, hotk->methods->display_get, &value))
- printk(KERN_WARNING
- "Asus ACPI: Error reading display status\n");
- value &= 0x07; /* needed for some models, shouldn't hurt others */
- return sprintf(page, "%d\n", value);
-}
-
-/*
- * Experimental support for display switching. As of now: 1 should activate
- * the LCD output, 2 should do for CRT, and 4 for TV-Out. Any combination
- * (bitwise) of these will suffice. I never actually tested 3 displays hooked
- * up simultaneously, so be warned. See the acpi4asus README for more info.
- */
-static int
-proc_write_disp(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
-{
- int rv, value;
-
- rv = parse_arg(buffer, count, &value);
- if (rv > 0)
- set_display(value);
- return rv;
-}
-
-typedef int (proc_readfunc) (char *page, char **start, off_t off, int count,
- int *eof, void *data);
-typedef int (proc_writefunc) (struct file *file, const char __user *buffer,
- unsigned long count, void *data);
-
-static int
-asus_proc_add(char *name, proc_writefunc *writefunc,
- proc_readfunc *readfunc, mode_t mode,
- struct acpi_device *device)
-{
- struct proc_dir_entry *proc =
- create_proc_entry(name, mode, acpi_device_dir(device));
- if (!proc) {
- printk(KERN_WARNING " Unable to create %s fs entry\n", name);
- return -1;
- }
- proc->write_proc = writefunc;
- proc->read_proc = readfunc;
- proc->data = acpi_driver_data(device);
- proc->owner = THIS_MODULE;
- proc->uid = asus_uid;
- proc->gid = asus_gid;
- return 0;
-}
-
-static int asus_hotk_add_fs(struct acpi_device *device)
-{
- struct proc_dir_entry *proc;
- mode_t mode;
-
- /*
- * If parameter uid or gid is not changed, keep the default setting for
- * our proc entries (-rw-rw-rw-) else, it means we care about security,
- * and then set to -rw-rw----
- */
-
- if ((asus_uid == 0) && (asus_gid == 0)) {
- mode = S_IFREG | S_IRUGO | S_IWUGO;
- } else {
- mode = S_IFREG | S_IRUSR | S_IRGRP | S_IWUSR | S_IWGRP;
- printk(KERN_WARNING " asus_uid and asus_gid parameters are "
- "deprecated, use chown and chmod instead!\n");
- }
-
- acpi_device_dir(device) = asus_proc_dir;
- if (!acpi_device_dir(device))
- return -ENODEV;
-
- proc = create_proc_entry(PROC_INFO, mode, acpi_device_dir(device));
- if (proc) {
- proc->read_proc = proc_read_info;
- proc->data = acpi_driver_data(device);
- proc->owner = THIS_MODULE;
- proc->uid = asus_uid;
- proc->gid = asus_gid;
- } else {
- printk(KERN_WARNING " Unable to create " PROC_INFO
- " fs entry\n");
- }
-
- if (hotk->methods->mt_wled) {
- asus_proc_add(PROC_WLED, &proc_write_wled, &proc_read_wled,
- mode, device);
- }
-
- if (hotk->methods->mt_ledd) {
- asus_proc_add(PROC_LEDD, &proc_write_ledd, &proc_read_ledd,
- mode, device);
- }
-
- if (hotk->methods->mt_mled) {
- asus_proc_add(PROC_MLED, &proc_write_mled, &proc_read_mled,
- mode, device);
- }
-
- if (hotk->methods->mt_tled) {
- asus_proc_add(PROC_TLED, &proc_write_tled, &proc_read_tled,
- mode, device);
- }
-
- if (hotk->methods->mt_bt_switch) {
- asus_proc_add(PROC_BT, &proc_write_bluetooth,
- &proc_read_bluetooth, mode, device);
- }
-
- /*
- * We need both read node and write method as LCD switch is also
- * accessible from the keyboard
- */
- if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status) {
- asus_proc_add(PROC_LCD, &proc_write_lcd, &proc_read_lcd, mode,
- device);
- }
-
- if ((hotk->methods->brightness_up && hotk->methods->brightness_down) ||
- (hotk->methods->brightness_get && hotk->methods->brightness_set)) {
- asus_proc_add(PROC_BRN, &proc_write_brn, &proc_read_brn, mode,
- device);
- }
-
- if (hotk->methods->display_set) {
- asus_proc_add(PROC_DISP, &proc_write_disp, &proc_read_disp,
- mode, device);
- }
-
- return 0;
-}
-
-static int asus_hotk_remove_fs(struct acpi_device *device)
-{
- if (acpi_device_dir(device)) {
- remove_proc_entry(PROC_INFO, acpi_device_dir(device));
- if (hotk->methods->mt_wled)
- remove_proc_entry(PROC_WLED, acpi_device_dir(device));
- if (hotk->methods->mt_mled)
- remove_proc_entry(PROC_MLED, acpi_device_dir(device));
- if (hotk->methods->mt_tled)
- remove_proc_entry(PROC_TLED, acpi_device_dir(device));
- if (hotk->methods->mt_ledd)
- remove_proc_entry(PROC_LEDD, acpi_device_dir(device));
- if (hotk->methods->mt_bt_switch)
- remove_proc_entry(PROC_BT, acpi_device_dir(device));
- if (hotk->methods->mt_lcd_switch && hotk->methods->lcd_status)
- remove_proc_entry(PROC_LCD, acpi_device_dir(device));
- if ((hotk->methods->brightness_up
- && hotk->methods->brightness_down)
- || (hotk->methods->brightness_get
- && hotk->methods->brightness_set))
- remove_proc_entry(PROC_BRN, acpi_device_dir(device));
- if (hotk->methods->display_set)
- remove_proc_entry(PROC_DISP, acpi_device_dir(device));
- }
- return 0;
-}
-
-static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
-{
- /* TODO Find a better way to handle events count. */
- if (!hotk)
- return;
-
- if ((event & ~((u32) BR_UP)) < 16)
- hotk->brightness = (event & ~((u32) BR_UP));
- else if ((event & ~((u32) BR_DOWN)) < 16)
- hotk->brightness = (event & ~((u32) BR_DOWN));
-
- acpi_bus_generate_proc_event(hotk->device, event,
- hotk->event_count[event % 128]++);
-
- return;
-}
-
-/*
- * Match the model string to the list of supported models. Return END_MODEL if
- * no match or model is NULL.
- */
-static int asus_model_match(char *model)
-{
- if (model == NULL)
- return END_MODEL;
-
- if (strncmp(model, "L3D", 3) == 0)
- return L3D;
- else if (strncmp(model, "L2E", 3) == 0 ||
- strncmp(model, "L3H", 3) == 0 || strncmp(model, "L5D", 3) == 0)
- return L3H;
- else if (strncmp(model, "L3", 2) == 0 || strncmp(model, "L2B", 3) == 0)
- return L3C;
- else if (strncmp(model, "L8L", 3) == 0)
- return L8L;
- else if (strncmp(model, "L4R", 3) == 0)
- return L4R;
- else if (strncmp(model, "M6N", 3) == 0 || strncmp(model, "W3N", 3) == 0)
- return M6N;
- else if (strncmp(model, "M6R", 3) == 0 || strncmp(model, "A3G", 3) == 0)
- return M6R;
- else if (strncmp(model, "M2N", 3) == 0 ||
- strncmp(model, "M3N", 3) == 0 ||
- strncmp(model, "M5N", 3) == 0 ||
- strncmp(model, "M6N", 3) == 0 ||
- strncmp(model, "S1N", 3) == 0 ||
- strncmp(model, "S5N", 3) == 0 || strncmp(model, "W1N", 3) == 0)
- return xxN;
- else if (strncmp(model, "M1", 2) == 0)
- return M1A;
- else if (strncmp(model, "M2", 2) == 0 || strncmp(model, "L4E", 3) == 0)
- return M2E;
- else if (strncmp(model, "L2", 2) == 0)
- return L2D;
- else if (strncmp(model, "L8", 2) == 0)
- return S1x;
- else if (strncmp(model, "D1", 2) == 0)
- return D1x;
- else if (strncmp(model, "A1", 2) == 0)
- return A1x;
- else if (strncmp(model, "A2", 2) == 0)
- return A2x;
- else if (strncmp(model, "J1", 2) == 0)
- return S2x;
- else if (strncmp(model, "L5", 2) == 0)
- return L5x;
- else if (strncmp(model, "A4G", 3) == 0)
- return A4G;
- else if (strncmp(model, "W1N", 3) == 0)
- return W1N;
- else if (strncmp(model, "W3V", 3) == 0)
- return W3V;
- else if (strncmp(model, "W5A", 3) == 0)
- return W5A;
- else if (strncmp(model, "A4S", 3) == 0)
- return A4S;
- else if (strncmp(model, "F3Sa", 4) == 0)
- return F3Sa;
- else
- return END_MODEL;
-}
-
-/*
- * This function is used to initialize the hotk with right values. In this
- * method, we can make all the detection we want, and modify the hotk struct
- */
-static int asus_hotk_get_info(void)
-{
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- union acpi_object *model = NULL;
- int bsts_result;
- char *string = NULL;
- acpi_status status;
-
- /*
- * Get DSDT headers early enough to allow for differentiating between
- * models, but late enough to allow acpi_bus_register_driver() to fail
- * before doing anything ACPI-specific. Should we encounter a machine,
- * which needs special handling (i.e. its hotkey device has a different
- * HID), this bit will be moved. A global variable asus_info contains
- * the DSDT header.
- */
- status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Couldn't get the DSDT table header\n");
-
- /* We have to write 0 on init this far for all ASUS models */
- if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
- printk(KERN_ERR " Hotkey initialization failed\n");
- return -ENODEV;
- }
-
- /* This needs to be called for some laptops to init properly */
- if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result))
- printk(KERN_WARNING " Error calling BSTS\n");
- else if (bsts_result)
- printk(KERN_NOTICE " BSTS called, 0x%02x returned\n",
- bsts_result);
-
- /*
- * Try to match the object returned by INIT to the specific model.
- * Handle every possible object (or the lack of thereof) the DSDT
- * writers might throw at us. When in trouble, we pass NULL to
- * asus_model_match() and try something completely different.
- */
- if (buffer.pointer) {
- model = buffer.pointer;
- switch (model->type) {
- case ACPI_TYPE_STRING:
- string = model->string.pointer;
- break;
- case ACPI_TYPE_BUFFER:
- string = model->buffer.pointer;
- break;
- default:
- kfree(model);
- model = NULL;
- break;
- }
- }
- hotk->model = asus_model_match(string);
- if (hotk->model == END_MODEL) { /* match failed */
- if (asus_info &&
- strncmp(asus_info->oem_table_id, "ODEM", 4) == 0) {
- hotk->model = P30;
- printk(KERN_NOTICE
- " Samsung P30 detected, supported\n");
- } else {
- hotk->model = M2E;
- printk(KERN_NOTICE " unsupported model %s, trying "
- "default values\n", string);
- printk(KERN_NOTICE
- " send /proc/acpi/dsdt to the developers\n");
- kfree(model);
- return -ENODEV;
- }
- hotk->methods = &model_conf[hotk->model];
- return AE_OK;
- }
- hotk->methods = &model_conf[hotk->model];
- printk(KERN_NOTICE " %s model detected, supported\n", string);
-
- /* Sort of per-model blacklist */
- if (strncmp(string, "L2B", 3) == 0)
- hotk->methods->lcd_status = NULL;
- /* L2B is similar enough to L3C to use its settings, with this only
- exception */
- else if (strncmp(string, "A3G", 3) == 0)
- hotk->methods->lcd_status = "\\BLFG";
- /* A3G is like M6R */
- else if (strncmp(string, "S5N", 3) == 0 ||
- strncmp(string, "M5N", 3) == 0 ||
- strncmp(string, "W3N", 3) == 0)
- hotk->methods->mt_mled = NULL;
- /* S5N, M5N and W3N have no MLED */
- else if (strncmp(string, "L5D", 3) == 0)
- hotk->methods->mt_wled = NULL;
- /* L5D's WLED is not controlled by ACPI */
- else if (strncmp(string, "M2N", 3) == 0 ||
- strncmp(string, "W3V", 3) == 0 ||
- strncmp(string, "S1N", 3) == 0)
- hotk->methods->mt_wled = "WLED";
- /* M2N, S1N and W3V have a usable WLED */
- else if (asus_info) {
- if (strncmp(asus_info->oem_table_id, "L1", 2) == 0)
- hotk->methods->mled_status = NULL;
- /* S1300A reports L84F, but L1400B too, account for that */
- }
-
- kfree(model);
-
- return AE_OK;
-}
-
-static int asus_hotk_check(void)
-{
- int result = 0;
-
- result = acpi_bus_get_status(hotk->device);
- if (result)
- return result;
-
- if (hotk->device->status.present) {
- result = asus_hotk_get_info();
- } else {
- printk(KERN_ERR " Hotkey device not present, aborting\n");
- return -EINVAL;
- }
-
- return result;
-}
-
-static int asus_hotk_found;
-
-static int asus_hotk_add(struct acpi_device *device)
-{
- acpi_status status = AE_OK;
- int result;
-
- if (!device)
- return -EINVAL;
-
- printk(KERN_NOTICE "Asus Laptop ACPI Extras version %s\n",
- ASUS_ACPI_VERSION);
-
- hotk = kzalloc(sizeof(struct asus_hotk), GFP_KERNEL);
- if (!hotk)
- return -ENOMEM;
-
- hotk->handle = device->handle;
- strcpy(acpi_device_name(device), ACPI_HOTK_DEVICE_NAME);
- strcpy(acpi_device_class(device), ACPI_HOTK_CLASS);
- device->driver_data = hotk;
- hotk->device = device;
-
- result = asus_hotk_check();
- if (result)
- goto end;
-
- result = asus_hotk_add_fs(device);
- if (result)
- goto end;
-
- /*
- * We install the handler, it will receive the hotk in parameter, so, we
- * could add other data to the hotk struct
- */
- status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify, hotk);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR " Error installing notify handler\n");
-
- /* For laptops without GPLV: init the hotk->brightness value */
- if ((!hotk->methods->brightness_get)
- && (!hotk->methods->brightness_status)
- && (hotk->methods->brightness_up && hotk->methods->brightness_down)) {
- status =
- acpi_evaluate_object(NULL, hotk->methods->brightness_down,
- NULL, NULL);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Error changing brightness\n");
- else {
- status =
- acpi_evaluate_object(NULL,
- hotk->methods->brightness_up,
- NULL, NULL);
- if (ACPI_FAILURE(status))
- printk(KERN_WARNING " Strange, error changing"
- " brightness\n");
- }
- }
-
- asus_hotk_found = 1;
-
- /* LED display is off by default */
- hotk->ledd_status = 0xFFF;
-
-end:
- if (result)
- kfree(hotk);
-
- return result;
-}
-
-static int asus_hotk_remove(struct acpi_device *device, int type)
-{
- acpi_status status = 0;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
- asus_hotk_notify);
- if (ACPI_FAILURE(status))
- printk(KERN_ERR "Asus ACPI: Error removing notify handler\n");
-
- asus_hotk_remove_fs(device);
-
- kfree(hotk);
-
- return 0;
-}
-
-static struct backlight_ops asus_backlight_data = {
- .get_brightness = read_brightness,
- .update_status = set_brightness_status,
-};
-
-static void asus_acpi_exit(void)
-{
- if (asus_backlight_device)
- backlight_device_unregister(asus_backlight_device);
-
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
-
- return;
-}
-
-static int __init asus_acpi_init(void)
-{
- int result;
-
- if (acpi_disabled)
- return -ENODEV;
-
- asus_proc_dir = proc_mkdir(PROC_ASUS, acpi_root_dir);
- if (!asus_proc_dir) {
- printk(KERN_ERR "Asus ACPI: Unable to create /proc entry\n");
- return -ENODEV;
- }
- asus_proc_dir->owner = THIS_MODULE;
-
- result = acpi_bus_register_driver(&asus_hotk_driver);
- if (result < 0) {
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
- return result;
- }
-
- /*
- * This is a bit of a kludge. We only want this module loaded
- * for ASUS systems, but there's currently no way to probe the
- * ACPI namespace for ASUS HIDs. So we just return failure if
- * we didn't find one, which will cause the module to be
- * unloaded.
- */
- if (!asus_hotk_found) {
- acpi_bus_unregister_driver(&asus_hotk_driver);
- remove_proc_entry(PROC_ASUS, acpi_root_dir);
- return -ENODEV;
- }
-
- asus_backlight_device = backlight_device_register("asus", NULL, NULL,
- &asus_backlight_data);
- if (IS_ERR(asus_backlight_device)) {
- printk(KERN_ERR "Could not register asus backlight device\n");
- asus_backlight_device = NULL;
- asus_acpi_exit();
- return -ENODEV;
- }
- asus_backlight_device->props.max_brightness = 15;
-
- return 0;
-}
-
-module_init(asus_acpi_init);
-module_exit(asus_acpi_exit);
diff --git a/drivers/acpi/toshiba_acpi.c b/drivers/acpi/toshiba_acpi.c
deleted file mode 100644
index 40e60fc2e59..00000000000
--- a/drivers/acpi/toshiba_acpi.c
+++ /dev/null
@@ -1,863 +0,0 @@
-/*
- * toshiba_acpi.c - Toshiba Laptop ACPI Extras
- *
- *
- * Copyright (C) 2002-2004 John Belmonte
- * Copyright (C) 2008 Philip Langdale
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * The devolpment page for this driver is located at
- * http://memebeam.org/toys/ToshibaAcpiDriver.
- *
- * Credits:
- * Jonathan A. Buzzard - Toshiba HCI info, and critical tips on reverse
- * engineering the Windows drivers
- * Yasushi Nagato - changes for linux kernel 2.4 -> 2.5
- * Rob Miller - TV out and hotkeys help
- *
- *
- * TODO
- *
- */
-
-#define TOSHIBA_ACPI_VERSION "0.19"
-#define PROC_INTERFACE_VERSION 1
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/proc_fs.h>
-#include <linux/backlight.h>
-#include <linux/platform_device.h>
-#include <linux/rfkill.h>
-#include <linux/input-polldev.h>
-
-#include <asm/uaccess.h>
-
-#include <acpi/acpi_drivers.h>
-
-MODULE_AUTHOR("John Belmonte");
-MODULE_DESCRIPTION("Toshiba Laptop ACPI Extras Driver");
-MODULE_LICENSE("GPL");
-
-#define MY_LOGPREFIX "toshiba_acpi: "
-#define MY_ERR KERN_ERR MY_LOGPREFIX
-#define MY_NOTICE KERN_NOTICE MY_LOGPREFIX
-#define MY_INFO KERN_INFO MY_LOGPREFIX
-
-/* Toshiba ACPI method paths */
-#define METHOD_LCD_BRIGHTNESS "\\_SB_.PCI0.VGA_.LCD_._BCM"
-#define METHOD_HCI_1 "\\_SB_.VALD.GHCI"
-#define METHOD_HCI_2 "\\_SB_.VALZ.GHCI"
-#define METHOD_VIDEO_OUT "\\_SB_.VALX.DSSX"
-
-/* Toshiba HCI interface definitions
- *
- * HCI is Toshiba's "Hardware Control Interface" which is supposed to
- * be uniform across all their models. Ideally we would just call
- * dedicated ACPI methods instead of using this primitive interface.
- * However the ACPI methods seem to be incomplete in some areas (for
- * example they allow setting, but not reading, the LCD brightness value),
- * so this is still useful.
- */
-
-#define HCI_WORDS 6
-
-/* operations */
-#define HCI_SET 0xff00
-#define HCI_GET 0xfe00
-
-/* return codes */
-#define HCI_SUCCESS 0x0000
-#define HCI_FAILURE 0x1000
-#define HCI_NOT_SUPPORTED 0x8000
-#define HCI_EMPTY 0x8c00
-
-/* registers */
-#define HCI_FAN 0x0004
-#define HCI_SYSTEM_EVENT 0x0016
-#define HCI_VIDEO_OUT 0x001c
-#define HCI_HOTKEY_EVENT 0x001e
-#define HCI_LCD_BRIGHTNESS 0x002a
-#define HCI_WIRELESS 0x0056
-
-/* field definitions */
-#define HCI_LCD_BRIGHTNESS_BITS 3
-#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS)
-#define HCI_LCD_BRIGHTNESS_LEVELS (1 << HCI_LCD_BRIGHTNESS_BITS)
-#define HCI_VIDEO_OUT_LCD 0x1
-#define HCI_VIDEO_OUT_CRT 0x2
-#define HCI_VIDEO_OUT_TV 0x4
-#define HCI_WIRELESS_KILL_SWITCH 0x01
-#define HCI_WIRELESS_BT_PRESENT 0x0f
-#define HCI_WIRELESS_BT_ATTACH 0x40
-#define HCI_WIRELESS_BT_POWER 0x80
-
-static const struct acpi_device_id toshiba_device_ids[] = {
- {"TOS6200", 0},
- {"TOS6208", 0},
- {"TOS1900", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, toshiba_device_ids);
-
-/* utility
- */
-
-static __inline__ void _set_bit(u32 * word, u32 mask, int value)
-{
- *word = (*word & ~mask) | (mask * value);
-}
-
-/* acpi interface wrappers
- */
-
-static int is_valid_acpi_path(const char *methodName)
-{
- acpi_handle handle;
- acpi_status status;
-
- status = acpi_get_handle(NULL, (char *)methodName, &handle);
- return !ACPI_FAILURE(status);
-}
-
-static int write_acpi_int(const char *methodName, int val)
-{
- struct acpi_object_list params;
- union acpi_object in_objs[1];
- acpi_status status;
-
- params.count = ARRAY_SIZE(in_objs);
- params.pointer = in_objs;
- in_objs[0].type = ACPI_TYPE_INTEGER;
- in_objs[0].integer.value = val;
-
- status = acpi_evaluate_object(NULL, (char *)methodName, &params, NULL);
- return (status == AE_OK);
-}
-
-#if 0
-static int read_acpi_int(const char *methodName, int *pVal)
-{
- struct acpi_buffer results;
- union acpi_object out_objs[1];
- acpi_status status;
-
- results.length = sizeof(out_objs);
- results.pointer = out_objs;
-
- status = acpi_evaluate_object(0, (char *)methodName, 0, &results);
- *pVal = out_objs[0].integer.value;
-
- return (status == AE_OK) && (out_objs[0].type == ACPI_TYPE_INTEGER);
-}
-#endif
-
-static const char *method_hci /*= 0*/ ;
-
-/* Perform a raw HCI call. Here we don't care about input or output buffer
- * format.
- */
-static acpi_status hci_raw(const u32 in[HCI_WORDS], u32 out[HCI_WORDS])
-{
- struct acpi_object_list params;
- union acpi_object in_objs[HCI_WORDS];
- struct acpi_buffer results;
- union acpi_object out_objs[HCI_WORDS + 1];
- acpi_status status;
- int i;
-
- params.count = HCI_WORDS;
- params.pointer = in_objs;
- for (i = 0; i < HCI_WORDS; ++i) {
- in_objs[i].type = ACPI_TYPE_INTEGER;
- in_objs[i].integer.value = in[i];
- }
-
- results.length = sizeof(out_objs);
- results.pointer = out_objs;
-
- status = acpi_evaluate_object(NULL, (char *)method_hci, &params,
- &results);
- if ((status == AE_OK) && (out_objs->package.count <= HCI_WORDS)) {
- for (i = 0; i < out_objs->package.count; ++i) {
- out[i] = out_objs->package.elements[i].integer.value;
- }
- }
-
- return status;
-}
-
-/* common hci tasks (get or set one or two value)
- *
- * In addition to the ACPI status, the HCI system returns a result which
- * may be useful (such as "not supported").
- */
-
-static acpi_status hci_write1(u32 reg, u32 in1, u32 * result)
-{
- u32 in[HCI_WORDS] = { HCI_SET, reg, in1, 0, 0, 0 };
- u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
- return status;
-}
-
-static acpi_status hci_read1(u32 reg, u32 * out1, u32 * result)
-{
- u32 in[HCI_WORDS] = { HCI_GET, reg, 0, 0, 0, 0 };
- u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
- *out1 = out[2];
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
- return status;
-}
-
-static acpi_status hci_write2(u32 reg, u32 in1, u32 in2, u32 *result)
-{
- u32 in[HCI_WORDS] = { HCI_SET, reg, in1, in2, 0, 0 };
- u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
- return status;
-}
-
-static acpi_status hci_read2(u32 reg, u32 *out1, u32 *out2, u32 *result)
-{
- u32 in[HCI_WORDS] = { HCI_GET, reg, *out1, *out2, 0, 0 };
- u32 out[HCI_WORDS];
- acpi_status status = hci_raw(in, out);
- *out1 = out[2];
- *out2 = out[3];
- *result = (status == AE_OK) ? out[0] : HCI_FAILURE;
- return status;
-}
-
-struct toshiba_acpi_dev {
- struct platform_device *p_dev;
- struct rfkill *rfk_dev;
- struct input_polled_dev *poll_dev;
-
- const char *bt_name;
- const char *rfk_name;
-
- bool last_rfk_state;
-
- struct mutex mutex;
-};
-
-static struct toshiba_acpi_dev toshiba_acpi = {
- .bt_name = "Toshiba Bluetooth",
- .rfk_name = "Toshiba RFKill Switch",
- .last_rfk_state = false,
-};
-
-/* Bluetooth rfkill handlers */
-
-static u32 hci_get_bt_present(bool *present)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0;
- hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
- if (hci_result == HCI_SUCCESS)
- *present = (value & HCI_WIRELESS_BT_PRESENT) ? true : false;
-
- return hci_result;
-}
-
-static u32 hci_get_bt_on(bool *on)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0x0001;
- hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
- if (hci_result == HCI_SUCCESS)
- *on = (value & HCI_WIRELESS_BT_POWER) &&
- (value & HCI_WIRELESS_BT_ATTACH);
-
- return hci_result;
-}
-
-static u32 hci_get_radio_state(bool *radio_state)
-{
- u32 hci_result;
- u32 value, value2;
-
- value = 0;
- value2 = 0x0001;
- hci_read2(HCI_WIRELESS, &value, &value2, &hci_result);
-
- *radio_state = value & HCI_WIRELESS_KILL_SWITCH;
- return hci_result;
-}
-
-static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
-{
- u32 result1, result2;
- u32 value;
- bool radio_state;
- struct toshiba_acpi_dev *dev = data;
-
- value = (state == RFKILL_STATE_UNBLOCKED);
-
- if (hci_get_radio_state(&radio_state) != HCI_SUCCESS)
- return -EFAULT;
-
- switch (state) {
- case RFKILL_STATE_UNBLOCKED:
- if (!radio_state)
- return -EPERM;
- break;
- case RFKILL_STATE_SOFT_BLOCKED:
- break;
- default:
- return -EINVAL;
- }
-
- mutex_lock(&dev->mutex);
- hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_POWER, &result1);
- hci_write2(HCI_WIRELESS, value, HCI_WIRELESS_BT_ATTACH, &result2);
- mutex_unlock(&dev->mutex);
-
- if (result1 != HCI_SUCCESS || result2 != HCI_SUCCESS)
- return -EFAULT;
-
- return 0;
-}
-
-static void bt_poll_rfkill(struct input_polled_dev *poll_dev)
-{
- bool state_changed;
- bool new_rfk_state;
- bool value;
- u32 hci_result;
- struct toshiba_acpi_dev *dev = poll_dev->private;
-
- hci_result = hci_get_radio_state(&value);
- if (hci_result != HCI_SUCCESS)
- return; /* Can't do anything useful */
-
- new_rfk_state = value;
-
- mutex_lock(&dev->mutex);
- state_changed = new_rfk_state != dev->last_rfk_state;
- dev->last_rfk_state = new_rfk_state;
- mutex_unlock(&dev->mutex);
-
- if (unlikely(state_changed)) {
- rfkill_force_state(dev->rfk_dev,
- new_rfk_state ?
- RFKILL_STATE_SOFT_BLOCKED :
- RFKILL_STATE_HARD_BLOCKED);
- input_report_switch(poll_dev->input, SW_RFKILL_ALL,
- new_rfk_state);
- input_sync(poll_dev->input);
- }
-}
-
-static struct proc_dir_entry *toshiba_proc_dir /*= 0*/ ;
-static struct backlight_device *toshiba_backlight_device;
-static int force_fan;
-static int last_key_event;
-static int key_event_valid;
-
-typedef struct _ProcItem {
- const char *name;
- char *(*read_func) (char *);
- unsigned long (*write_func) (const char *, unsigned long);
-} ProcItem;
-
-/* proc file handlers
- */
-
-static int
-dispatch_read(char *page, char **start, off_t off, int count, int *eof,
- ProcItem * item)
-{
- char *p = page;
- int len;
-
- if (off == 0)
- p = item->read_func(p);
-
- /* ISSUE: I don't understand this code */
- len = (p - page);
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
- return len;
-}
-
-static int
-dispatch_write(struct file *file, const char __user * buffer,
- unsigned long count, ProcItem * item)
-{
- int result;
- char *tmp_buffer;
-
- /* Arg buffer points to userspace memory, which can't be accessed
- * directly. Since we're making a copy, zero-terminate the
- * destination so that sscanf can be used on it safely.
- */
- tmp_buffer = kmalloc(count + 1, GFP_KERNEL);
- if (!tmp_buffer)
- return -ENOMEM;
-
- if (copy_from_user(tmp_buffer, buffer, count)) {
- result = -EFAULT;
- } else {
- tmp_buffer[count] = 0;
- result = item->write_func(tmp_buffer, count);
- }
- kfree(tmp_buffer);
- return result;
-}
-
-static int get_lcd(struct backlight_device *bd)
-{
- u32 hci_result;
- u32 value;
-
- hci_read1(HCI_LCD_BRIGHTNESS, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
- return (value >> HCI_LCD_BRIGHTNESS_SHIFT);
- } else
- return -EFAULT;
-}
-
-static char *read_lcd(char *p)
-{
- int value = get_lcd(NULL);
-
- if (value >= 0) {
- p += sprintf(p, "brightness: %d\n", value);
- p += sprintf(p, "brightness_levels: %d\n",
- HCI_LCD_BRIGHTNESS_LEVELS);
- } else {
- printk(MY_ERR "Error reading LCD brightness\n");
- }
-
- return p;
-}
-
-static int set_lcd(int value)
-{
- u32 hci_result;
-
- value = value << HCI_LCD_BRIGHTNESS_SHIFT;
- hci_write1(HCI_LCD_BRIGHTNESS, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
- return -EFAULT;
-
- return 0;
-}
-
-static int set_lcd_status(struct backlight_device *bd)
-{
- return set_lcd(bd->props.brightness);
-}
-
-static unsigned long write_lcd(const char *buffer, unsigned long count)
-{
- int value;
- int ret;
-
- if (sscanf(buffer, " brightness : %i", &value) == 1 &&
- value >= 0 && value < HCI_LCD_BRIGHTNESS_LEVELS) {
- ret = set_lcd(value);
- if (ret == 0)
- ret = count;
- } else {
- ret = -EINVAL;
- }
- return ret;
-}
-
-static char *read_video(char *p)
-{
- u32 hci_result;
- u32 value;
-
- hci_read1(HCI_VIDEO_OUT, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
- int is_lcd = (value & HCI_VIDEO_OUT_LCD) ? 1 : 0;
- int is_crt = (value & HCI_VIDEO_OUT_CRT) ? 1 : 0;
- int is_tv = (value & HCI_VIDEO_OUT_TV) ? 1 : 0;
- p += sprintf(p, "lcd_out: %d\n", is_lcd);
- p += sprintf(p, "crt_out: %d\n", is_crt);
- p += sprintf(p, "tv_out: %d\n", is_tv);
- } else {
- printk(MY_ERR "Error reading video out status\n");
- }
-
- return p;
-}
-
-static unsigned long write_video(const char *buffer, unsigned long count)
-{
- int value;
- int remain = count;
- int lcd_out = -1;
- int crt_out = -1;
- int tv_out = -1;
- u32 hci_result;
- u32 video_out;
-
- /* scan expression. Multiple expressions may be delimited with ;
- *
- * NOTE: to keep scanning simple, invalid fields are ignored
- */
- while (remain) {
- if (sscanf(buffer, " lcd_out : %i", &value) == 1)
- lcd_out = value & 1;
- else if (sscanf(buffer, " crt_out : %i", &value) == 1)
- crt_out = value & 1;
- else if (sscanf(buffer, " tv_out : %i", &value) == 1)
- tv_out = value & 1;
- /* advance to one character past the next ; */
- do {
- ++buffer;
- --remain;
- }
- while (remain && *(buffer - 1) != ';');
- }
-
- hci_read1(HCI_VIDEO_OUT, &video_out, &hci_result);
- if (hci_result == HCI_SUCCESS) {
- unsigned int new_video_out = video_out;
- if (lcd_out != -1)
- _set_bit(&new_video_out, HCI_VIDEO_OUT_LCD, lcd_out);
- if (crt_out != -1)
- _set_bit(&new_video_out, HCI_VIDEO_OUT_CRT, crt_out);
- if (tv_out != -1)
- _set_bit(&new_video_out, HCI_VIDEO_OUT_TV, tv_out);
- /* To avoid unnecessary video disruption, only write the new
- * video setting if something changed. */
- if (new_video_out != video_out)
- write_acpi_int(METHOD_VIDEO_OUT, new_video_out);
- } else {
- return -EFAULT;
- }
-
- return count;
-}
-
-static char *read_fan(char *p)
-{
- u32 hci_result;
- u32 value;
-
- hci_read1(HCI_FAN, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
- p += sprintf(p, "running: %d\n", (value > 0));
- p += sprintf(p, "force_on: %d\n", force_fan);
- } else {
- printk(MY_ERR "Error reading fan status\n");
- }
-
- return p;
-}
-
-static unsigned long write_fan(const char *buffer, unsigned long count)
-{
- int value;
- u32 hci_result;
-
- if (sscanf(buffer, " force_on : %i", &value) == 1 &&
- value >= 0 && value <= 1) {
- hci_write1(HCI_FAN, value, &hci_result);
- if (hci_result != HCI_SUCCESS)
- return -EFAULT;
- else
- force_fan = value;
- } else {
- return -EINVAL;
- }
-
- return count;
-}
-
-static char *read_keys(char *p)
-{
- u32 hci_result;
- u32 value;
-
- if (!key_event_valid) {
- hci_read1(HCI_SYSTEM_EVENT, &value, &hci_result);
- if (hci_result == HCI_SUCCESS) {
- key_event_valid = 1;
- last_key_event = value;
- } else if (hci_result == HCI_EMPTY) {
- /* better luck next time */
- } else if (hci_result == HCI_NOT_SUPPORTED) {
- /* This is a workaround for an unresolved issue on
- * some machines where system events sporadically
- * become disabled. */
- hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
- printk(MY_NOTICE "Re-enabled hotkeys\n");
- } else {
- printk(MY_ERR "Error reading hotkey status\n");
- goto end;
- }
- }
-
- p += sprintf(p, "hotkey_ready: %d\n", key_event_valid);
- p += sprintf(p, "hotkey: 0x%04x\n", last_key_event);
-
- end:
- return p;
-}
-
-static unsigned long write_keys(const char *buffer, unsigned long count)
-{
- int value;
-
- if (sscanf(buffer, " hotkey_ready : %i", &value) == 1 && value == 0) {
- key_event_valid = 0;
- } else {
- return -EINVAL;
- }
-
- return count;
-}
-
-static char *read_version(char *p)
-{
- p += sprintf(p, "driver: %s\n", TOSHIBA_ACPI_VERSION);
- p += sprintf(p, "proc_interface: %d\n",
- PROC_INTERFACE_VERSION);
- return p;
-}
-
-/* proc and module init
- */
-
-#define PROC_TOSHIBA "toshiba"
-
-static ProcItem proc_items[] = {
- {"lcd", read_lcd, write_lcd},
- {"video", read_video, write_video},
- {"fan", read_fan, write_fan},
- {"keys", read_keys, write_keys},
- {"version", read_version, NULL},
- {NULL}
-};
-
-static acpi_status __init add_device(void)
-{
- struct proc_dir_entry *proc;
- ProcItem *item;
-
- for (item = proc_items; item->name; ++item) {
- proc = create_proc_read_entry(item->name,
- S_IFREG | S_IRUGO | S_IWUSR,
- toshiba_proc_dir,
- (read_proc_t *) dispatch_read,
- item);
- if (proc)
- proc->owner = THIS_MODULE;
- if (proc && item->write_func)
- proc->write_proc = (write_proc_t *) dispatch_write;
- }
-
- return AE_OK;
-}
-
-static acpi_status remove_device(void)
-{
- ProcItem *item;
-
- for (item = proc_items; item->name; ++item)
- remove_proc_entry(item->name, toshiba_proc_dir);
- return AE_OK;
-}
-
-static struct backlight_ops toshiba_backlight_data = {
- .get_brightness = get_lcd,
- .update_status = set_lcd_status,
-};
-
-static void toshiba_acpi_exit(void)
-{
- if (toshiba_acpi.poll_dev) {
- input_unregister_polled_device(toshiba_acpi.poll_dev);
- input_free_polled_device(toshiba_acpi.poll_dev);
- }
-
- if (toshiba_acpi.rfk_dev)
- rfkill_unregister(toshiba_acpi.rfk_dev);
-
- if (toshiba_backlight_device)
- backlight_device_unregister(toshiba_backlight_device);
-
- remove_device();
-
- if (toshiba_proc_dir)
- remove_proc_entry(PROC_TOSHIBA, acpi_root_dir);
-
- platform_device_unregister(toshiba_acpi.p_dev);
-
- return;
-}
-
-static int __init toshiba_acpi_init(void)
-{
- acpi_status status = AE_OK;
- u32 hci_result;
- bool bt_present;
- bool bt_on;
- bool radio_on;
- int ret = 0;
-
- if (acpi_disabled)
- return -ENODEV;
-
- /* simple device detection: look for HCI method */
- if (is_valid_acpi_path(METHOD_HCI_1))
- method_hci = METHOD_HCI_1;
- else if (is_valid_acpi_path(METHOD_HCI_2))
- method_hci = METHOD_HCI_2;
- else
- return -ENODEV;
-
- printk(MY_INFO "Toshiba Laptop ACPI Extras version %s\n",
- TOSHIBA_ACPI_VERSION);
- printk(MY_INFO " HCI method: %s\n", method_hci);
-
- mutex_init(&toshiba_acpi.mutex);
-
- toshiba_acpi.p_dev = platform_device_register_simple("toshiba_acpi",
- -1, NULL, 0);
- if (IS_ERR(toshiba_acpi.p_dev)) {
- ret = PTR_ERR(toshiba_acpi.p_dev);
- printk(MY_ERR "unable to register platform device\n");
- toshiba_acpi.p_dev = NULL;
- toshiba_acpi_exit();
- return ret;
- }
-
- force_fan = 0;
- key_event_valid = 0;
-
- /* enable event fifo */
- hci_write1(HCI_SYSTEM_EVENT, 1, &hci_result);
-
- toshiba_proc_dir = proc_mkdir(PROC_TOSHIBA, acpi_root_dir);
- if (!toshiba_proc_dir) {
- toshiba_acpi_exit();
- return -ENODEV;
- } else {
- toshiba_proc_dir->owner = THIS_MODULE;
- status = add_device();
- if (ACPI_FAILURE(status)) {
- toshiba_acpi_exit();
- return -ENODEV;
- }
- }
-
- toshiba_backlight_device = backlight_device_register("toshiba",
- &toshiba_acpi.p_dev->dev,
- NULL,
- &toshiba_backlight_data);
- if (IS_ERR(toshiba_backlight_device)) {
- ret = PTR_ERR(toshiba_backlight_device);
-
- printk(KERN_ERR "Could not register toshiba backlight device\n");
- toshiba_backlight_device = NULL;
- toshiba_acpi_exit();
- return ret;
- }
- toshiba_backlight_device->props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1;
-
- /* Register rfkill switch for Bluetooth */
- if (hci_get_bt_present(&bt_present) == HCI_SUCCESS && bt_present) {
- toshiba_acpi.rfk_dev = rfkill_allocate(&toshiba_acpi.p_dev->dev,
- RFKILL_TYPE_BLUETOOTH);
- if (!toshiba_acpi.rfk_dev) {
- printk(MY_ERR "unable to allocate rfkill device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
-
- toshiba_acpi.rfk_dev->name = toshiba_acpi.bt_name;
- toshiba_acpi.rfk_dev->toggle_radio = bt_rfkill_toggle_radio;
- toshiba_acpi.rfk_dev->user_claim_unsupported = 1;
- toshiba_acpi.rfk_dev->data = &toshiba_acpi;
-
- if (hci_get_bt_on(&bt_on) == HCI_SUCCESS && bt_on) {
- toshiba_acpi.rfk_dev->state = RFKILL_STATE_UNBLOCKED;
- } else if (hci_get_radio_state(&radio_on) == HCI_SUCCESS &&
- radio_on) {
- toshiba_acpi.rfk_dev->state = RFKILL_STATE_SOFT_BLOCKED;
- } else {
- toshiba_acpi.rfk_dev->state = RFKILL_STATE_HARD_BLOCKED;
- }
-
- ret = rfkill_register(toshiba_acpi.rfk_dev);
- if (ret) {
- printk(MY_ERR "unable to register rfkill device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
-
- /* Register input device for kill switch */
- toshiba_acpi.poll_dev = input_allocate_polled_device();
- if (!toshiba_acpi.poll_dev) {
- printk(MY_ERR
- "unable to allocate kill-switch input device\n");
- toshiba_acpi_exit();
- return -ENOMEM;
- }
- toshiba_acpi.poll_dev->private = &toshiba_acpi;
- toshiba_acpi.poll_dev->poll = bt_poll_rfkill;
- toshiba_acpi.poll_dev->poll_interval = 1000; /* msecs */
-
- toshiba_acpi.poll_dev->input->name = toshiba_acpi.rfk_name;
- toshiba_acpi.poll_dev->input->id.bustype = BUS_HOST;
- /* Toshiba USB ID */
- toshiba_acpi.poll_dev->input->id.vendor = 0x0930;
- set_bit(EV_SW, toshiba_acpi.poll_dev->input->evbit);
- set_bit(SW_RFKILL_ALL, toshiba_acpi.poll_dev->input->swbit);
- input_report_switch(toshiba_acpi.poll_dev->input,
- SW_RFKILL_ALL, TRUE);
- input_sync(toshiba_acpi.poll_dev->input);
-
- ret = input_register_polled_device(toshiba_acpi.poll_dev);
- if (ret) {
- printk(MY_ERR
- "unable to register kill-switch input device\n");
- toshiba_acpi_exit();
- return ret;
- }
- }
-
- return 0;
-}
-
-module_init(toshiba_acpi_init);
-module_exit(toshiba_acpi_exit);
diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c
deleted file mode 100644
index 8a8b377712c..00000000000
--- a/drivers/acpi/wmi.c
+++ /dev/null
@@ -1,747 +0,0 @@
-/*
- * ACPI-WMI mapping driver
- *
- * Copyright (C) 2007-2008 Carlos Corbacho <carlos@strangeworlds.co.uk>
- *
- * GUID parsing code from ldm.c is:
- * Copyright (C) 2001,2002 Richard Russon <ldm@flatcap.org>
- * Copyright (c) 2001-2007 Anton Altaparmakov
- * Copyright (C) 2001,2002 Jakob Kemi <jakob.kemi@telia.com>
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/list.h>
-#include <linux/acpi.h>
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-
-ACPI_MODULE_NAME("wmi");
-MODULE_AUTHOR("Carlos Corbacho");
-MODULE_DESCRIPTION("ACPI-WMI Mapping Driver");
-MODULE_LICENSE("GPL");
-
-#define ACPI_WMI_CLASS "wmi"
-
-#undef PREFIX
-#define PREFIX "ACPI: WMI: "
-
-static DEFINE_MUTEX(wmi_data_lock);
-
-struct guid_block {
- char guid[16];
- union {
- char object_id[2];
- struct {
- unsigned char notify_id;
- unsigned char reserved;
- };
- };
- u8 instance_count;
- u8 flags;
-};
-
-struct wmi_block {
- struct list_head list;
- struct guid_block gblock;
- acpi_handle handle;
- wmi_notify_handler handler;
- void *handler_data;
-};
-
-static struct wmi_block wmi_blocks;
-
-/*
- * If the GUID data block is marked as expensive, we must enable and
- * explicitily disable data collection.
- */
-#define ACPI_WMI_EXPENSIVE 0x1
-#define ACPI_WMI_METHOD 0x2 /* GUID is a method */
-#define ACPI_WMI_STRING 0x4 /* GUID takes & returns a string */
-#define ACPI_WMI_EVENT 0x8 /* GUID is an event */
-
-static int acpi_wmi_remove(struct acpi_device *device, int type);
-static int acpi_wmi_add(struct acpi_device *device);
-
-static const struct acpi_device_id wmi_device_ids[] = {
- {"PNP0C14", 0},
- {"pnp0c14", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, wmi_device_ids);
-
-static struct acpi_driver acpi_wmi_driver = {
- .name = "wmi",
- .class = ACPI_WMI_CLASS,
- .ids = wmi_device_ids,
- .ops = {
- .add = acpi_wmi_add,
- .remove = acpi_wmi_remove,
- },
-};
-
-/*
- * GUID parsing functions
- */
-
-/**
- * wmi_parse_hexbyte - Convert a ASCII hex number to a byte
- * @src: Pointer to at least 2 characters to convert.
- *
- * Convert a two character ASCII hex string to a number.
- *
- * Return: 0-255 Success, the byte was parsed correctly
- * -1 Error, an invalid character was supplied
- */
-static int wmi_parse_hexbyte(const u8 *src)
-{
- unsigned int x; /* For correct wrapping */
- int h;
-
- /* high part */
- x = src[0];
- if (x - '0' <= '9' - '0') {
- h = x - '0';
- } else if (x - 'a' <= 'f' - 'a') {
- h = x - 'a' + 10;
- } else if (x - 'A' <= 'F' - 'A') {
- h = x - 'A' + 10;
- } else {
- return -1;
- }
- h <<= 4;
-
- /* low part */
- x = src[1];
- if (x - '0' <= '9' - '0')
- return h | (x - '0');
- if (x - 'a' <= 'f' - 'a')
- return h | (x - 'a' + 10);
- if (x - 'A' <= 'F' - 'A')
- return h | (x - 'A' + 10);
- return -1;
-}
-
-/**
- * wmi_swap_bytes - Rearrange GUID bytes to match GUID binary
- * @src: Memory block holding binary GUID (16 bytes)
- * @dest: Memory block to hold byte swapped binary GUID (16 bytes)
- *
- * Byte swap a binary GUID to match it's real GUID value
- */
-static void wmi_swap_bytes(u8 *src, u8 *dest)
-{
- int i;
-
- for (i = 0; i <= 3; i++)
- memcpy(dest + i, src + (3 - i), 1);
-
- for (i = 0; i <= 1; i++)
- memcpy(dest + 4 + i, src + (5 - i), 1);
-
- for (i = 0; i <= 1; i++)
- memcpy(dest + 6 + i, src + (7 - i), 1);
-
- memcpy(dest + 8, src + 8, 8);
-}
-
-/**
- * wmi_parse_guid - Convert GUID from ASCII to binary
- * @src: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- * @dest: Memory block to hold binary GUID (16 bytes)
- *
- * N.B. The GUID need not be NULL terminated.
- *
- * Return: 'true' @dest contains binary GUID
- * 'false' @dest contents are undefined
- */
-static bool wmi_parse_guid(const u8 *src, u8 *dest)
-{
- static const int size[] = { 4, 2, 2, 2, 6 };
- int i, j, v;
-
- if (src[8] != '-' || src[13] != '-' ||
- src[18] != '-' || src[23] != '-')
- return false;
-
- for (j = 0; j < 5; j++, src++) {
- for (i = 0; i < size[j]; i++, src += 2, *dest++ = v) {
- v = wmi_parse_hexbyte(src);
- if (v < 0)
- return false;
- }
- }
-
- return true;
-}
-
-static bool find_guid(const char *guid_string, struct wmi_block **out)
-{
- char tmp[16], guid_input[16];
- struct wmi_block *wblock;
- struct guid_block *block;
- struct list_head *p;
-
- wmi_parse_guid(guid_string, tmp);
- wmi_swap_bytes(tmp, guid_input);
-
- list_for_each(p, &wmi_blocks.list) {
- wblock = list_entry(p, struct wmi_block, list);
- block = &wblock->gblock;
-
- if (memcmp(block->guid, guid_input, 16) == 0) {
- if (out)
- *out = wblock;
- return 1;
- }
- }
- return 0;
-}
-
-static acpi_status wmi_method_enable(struct wmi_block *wblock, int enable)
-{
- struct guid_block *block = NULL;
- char method[5];
- struct acpi_object_list input;
- union acpi_object params[1];
- acpi_status status;
- acpi_handle handle;
-
- block = &wblock->gblock;
- handle = wblock->handle;
-
- if (!block)
- return AE_NOT_EXIST;
-
- input.count = 1;
- input.pointer = params;
- params[0].type = ACPI_TYPE_INTEGER;
- params[0].integer.value = enable;
-
- snprintf(method, 5, "WE%02X", block->notify_id);
- status = acpi_evaluate_object(handle, method, &input, NULL);
-
- if (status != AE_OK && status != AE_NOT_FOUND)
- return status;
- else
- return AE_OK;
-}
-
-/*
- * Exported WMI functions
- */
-/**
- * wmi_evaluate_method - Evaluate a WMI method
- * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- * @instance: Instance index
- * @method_id: Method ID to call
- * &in: Buffer containing input for the method call
- * &out: Empty buffer to return the method results
- *
- * Call an ACPI-WMI method
- */
-acpi_status wmi_evaluate_method(const char *guid_string, u8 instance,
-u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out)
-{
- struct guid_block *block = NULL;
- struct wmi_block *wblock = NULL;
- acpi_handle handle;
- acpi_status status;
- struct acpi_object_list input;
- union acpi_object params[3];
- char method[4] = "WM";
-
- if (!find_guid(guid_string, &wblock))
- return AE_ERROR;
-
- block = &wblock->gblock;
- handle = wblock->handle;
-
- if (!(block->flags & ACPI_WMI_METHOD))
- return AE_BAD_DATA;
-
- if (block->instance_count < instance)
- return AE_BAD_PARAMETER;
-
- input.count = 2;
- input.pointer = params;
- params[0].type = ACPI_TYPE_INTEGER;
- params[0].integer.value = instance;
- params[1].type = ACPI_TYPE_INTEGER;
- params[1].integer.value = method_id;
-
- if (in) {
- input.count = 3;
-
- if (block->flags & ACPI_WMI_STRING) {
- params[2].type = ACPI_TYPE_STRING;
- } else {
- params[2].type = ACPI_TYPE_BUFFER;
- }
- params[2].buffer.length = in->length;
- params[2].buffer.pointer = in->pointer;
- }
-
- strncat(method, block->object_id, 2);
-
- status = acpi_evaluate_object(handle, method, &input, out);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(wmi_evaluate_method);
-
-/**
- * wmi_query_block - Return contents of a WMI block
- * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- * @instance: Instance index
- * &out: Empty buffer to return the contents of the data block to
- *
- * Return the contents of an ACPI-WMI data block to a buffer
- */
-acpi_status wmi_query_block(const char *guid_string, u8 instance,
-struct acpi_buffer *out)
-{
- struct guid_block *block = NULL;
- struct wmi_block *wblock = NULL;
- acpi_handle handle, wc_handle;
- acpi_status status, wc_status = AE_ERROR;
- struct acpi_object_list input, wc_input;
- union acpi_object wc_params[1], wq_params[1];
- char method[4];
- char wc_method[4] = "WC";
-
- if (!guid_string || !out)
- return AE_BAD_PARAMETER;
-
- if (!find_guid(guid_string, &wblock))
- return AE_ERROR;
-
- block = &wblock->gblock;
- handle = wblock->handle;
-
- if (block->instance_count < instance)
- return AE_BAD_PARAMETER;
-
- /* Check GUID is a data block */
- if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
- return AE_ERROR;
-
- input.count = 1;
- input.pointer = wq_params;
- wq_params[0].type = ACPI_TYPE_INTEGER;
- wq_params[0].integer.value = instance;
-
- /*
- * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method first to
- * enable collection.
- */
- if (block->flags & ACPI_WMI_EXPENSIVE) {
- wc_input.count = 1;
- wc_input.pointer = wc_params;
- wc_params[0].type = ACPI_TYPE_INTEGER;
- wc_params[0].integer.value = 1;
-
- strncat(wc_method, block->object_id, 2);
-
- /*
- * Some GUIDs break the specification by declaring themselves
- * expensive, but have no corresponding WCxx method. So we
- * should not fail if this happens.
- */
- wc_status = acpi_get_handle(handle, wc_method, &wc_handle);
- if (ACPI_SUCCESS(wc_status))
- wc_status = acpi_evaluate_object(handle, wc_method,
- &wc_input, NULL);
- }
-
- strcpy(method, "WQ");
- strncat(method, block->object_id, 2);
-
- status = acpi_evaluate_object(handle, method, &input, out);
-
- /*
- * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if
- * the WQxx method failed - we should disable collection anyway.
- */
- if ((block->flags & ACPI_WMI_EXPENSIVE) && ACPI_SUCCESS(wc_status)) {
- wc_params[0].integer.value = 0;
- status = acpi_evaluate_object(handle,
- wc_method, &wc_input, NULL);
- }
-
- return status;
-}
-EXPORT_SYMBOL_GPL(wmi_query_block);
-
-/**
- * wmi_set_block - Write to a WMI block
- * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- * @instance: Instance index
- * &in: Buffer containing new values for the data block
- *
- * Write the contents of the input buffer to an ACPI-WMI data block
- */
-acpi_status wmi_set_block(const char *guid_string, u8 instance,
-const struct acpi_buffer *in)
-{
- struct guid_block *block = NULL;
- struct wmi_block *wblock = NULL;
- acpi_handle handle;
- struct acpi_object_list input;
- union acpi_object params[2];
- char method[4] = "WS";
-
- if (!guid_string || !in)
- return AE_BAD_DATA;
-
- if (!find_guid(guid_string, &wblock))
- return AE_ERROR;
-
- block = &wblock->gblock;
- handle = wblock->handle;
-
- if (block->instance_count < instance)
- return AE_BAD_PARAMETER;
-
- /* Check GUID is a data block */
- if (block->flags & (ACPI_WMI_EVENT | ACPI_WMI_METHOD))
- return AE_ERROR;
-
- input.count = 2;
- input.pointer = params;
- params[0].type = ACPI_TYPE_INTEGER;
- params[0].integer.value = instance;
-
- if (block->flags & ACPI_WMI_STRING) {
- params[1].type = ACPI_TYPE_STRING;
- } else {
- params[1].type = ACPI_TYPE_BUFFER;
- }
- params[1].buffer.length = in->length;
- params[1].buffer.pointer = in->pointer;
-
- strncat(method, block->object_id, 2);
-
- return acpi_evaluate_object(handle, method, &input, NULL);
-}
-EXPORT_SYMBOL_GPL(wmi_set_block);
-
-/**
- * wmi_install_notify_handler - Register handler for WMI events
- * @handler: Function to handle notifications
- * @data: Data to be returned to handler when event is fired
- *
- * Register a handler for events sent to the ACPI-WMI mapper device.
- */
-acpi_status wmi_install_notify_handler(const char *guid,
-wmi_notify_handler handler, void *data)
-{
- struct wmi_block *block;
- acpi_status status;
-
- if (!guid || !handler)
- return AE_BAD_PARAMETER;
-
- find_guid(guid, &block);
- if (!block)
- return AE_NOT_EXIST;
-
- if (block->handler)
- return AE_ALREADY_ACQUIRED;
-
- block->handler = handler;
- block->handler_data = data;
-
- status = wmi_method_enable(block, 1);
-
- return status;
-}
-EXPORT_SYMBOL_GPL(wmi_install_notify_handler);
-
-/**
- * wmi_uninstall_notify_handler - Unregister handler for WMI events
- *
- * Unregister handler for events sent to the ACPI-WMI mapper device.
- */
-acpi_status wmi_remove_notify_handler(const char *guid)
-{
- struct wmi_block *block;
- acpi_status status;
-
- if (!guid)
- return AE_BAD_PARAMETER;
-
- find_guid(guid, &block);
- if (!block)
- return AE_NOT_EXIST;
-
- if (!block->handler)
- return AE_NULL_ENTRY;
-
- status = wmi_method_enable(block, 0);
-
- block->handler = NULL;
- block->handler_data = NULL;
-
- return status;
-}
-EXPORT_SYMBOL_GPL(wmi_remove_notify_handler);
-
-/**
- * wmi_get_event_data - Get WMI data associated with an event
- *
- * @event - Event to find
- * &out - Buffer to hold event data
- *
- * Returns extra data associated with an event in WMI.
- */
-acpi_status wmi_get_event_data(u32 event, struct acpi_buffer *out)
-{
- struct acpi_object_list input;
- union acpi_object params[1];
- struct guid_block *gblock;
- struct wmi_block *wblock;
- struct list_head *p;
-
- input.count = 1;
- input.pointer = params;
- params[0].type = ACPI_TYPE_INTEGER;
- params[0].integer.value = event;
-
- list_for_each(p, &wmi_blocks.list) {
- wblock = list_entry(p, struct wmi_block, list);
- gblock = &wblock->gblock;
-
- if ((gblock->flags & ACPI_WMI_EVENT) &&
- (gblock->notify_id == event))
- return acpi_evaluate_object(wblock->handle, "_WED",
- &input, out);
- }
-
- return AE_NOT_FOUND;
-}
-EXPORT_SYMBOL_GPL(wmi_get_event_data);
-
-/**
- * wmi_has_guid - Check if a GUID is available
- * @guid_string: 36 char string of the form fa50ff2b-f2e8-45de-83fa-65417f2f49ba
- *
- * Check if a given GUID is defined by _WDG
- */
-bool wmi_has_guid(const char *guid_string)
-{
- return find_guid(guid_string, NULL);
-}
-EXPORT_SYMBOL_GPL(wmi_has_guid);
-
-/*
- * Parse the _WDG method for the GUID data blocks
- */
-static __init acpi_status parse_wdg(acpi_handle handle)
-{
- struct acpi_buffer out = {ACPI_ALLOCATE_BUFFER, NULL};
- union acpi_object *obj;
- struct guid_block *gblock;
- struct wmi_block *wblock;
- acpi_status status;
- u32 i, total;
-
- status = acpi_evaluate_object(handle, "_WDG", NULL, &out);
-
- if (ACPI_FAILURE(status))
- return status;
-
- obj = (union acpi_object *) out.pointer;
-
- if (obj->type != ACPI_TYPE_BUFFER)
- return AE_ERROR;
-
- total = obj->buffer.length / sizeof(struct guid_block);
-
- gblock = kzalloc(obj->buffer.length, GFP_KERNEL);
- if (!gblock)
- return AE_NO_MEMORY;
-
- memcpy(gblock, obj->buffer.pointer, obj->buffer.length);
-
- for (i = 0; i < total; i++) {
- wblock = kzalloc(sizeof(struct wmi_block), GFP_KERNEL);
- if (!wblock)
- return AE_NO_MEMORY;
-
- wblock->gblock = gblock[i];
- wblock->handle = handle;
- list_add_tail(&wblock->list, &wmi_blocks.list);
- }
-
- kfree(out.pointer);
- kfree(gblock);
-
- return status;
-}
-
-/*
- * WMI can have EmbeddedControl access regions. In which case, we just want to
- * hand these off to the EC driver.
- */
-static acpi_status
-acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address,
- u32 bits, acpi_integer * value,
- void *handler_context, void *region_context)
-{
- int result = 0, i = 0;
- u8 temp = 0;
-
- if ((address > 0xFF) || !value)
- return AE_BAD_PARAMETER;
-
- if (function != ACPI_READ && function != ACPI_WRITE)
- return AE_BAD_PARAMETER;
-
- if (bits != 8)
- return AE_BAD_PARAMETER;
-
- if (function == ACPI_READ) {
- result = ec_read(address, &temp);
- (*value) |= ((acpi_integer)temp) << i;
- } else {
- temp = 0xff & ((*value) >> i);
- result = ec_write(address, temp);
- }
-
- switch (result) {
- case -EINVAL:
- return AE_BAD_PARAMETER;
- break;
- case -ENODEV:
- return AE_NOT_FOUND;
- break;
- case -ETIME:
- return AE_TIME;
- break;
- default:
- return AE_OK;
- }
-}
-
-static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data)
-{
- struct guid_block *block;
- struct wmi_block *wblock;
- struct list_head *p;
- struct acpi_device *device = data;
-
- list_for_each(p, &wmi_blocks.list) {
- wblock = list_entry(p, struct wmi_block, list);
- block = &wblock->gblock;
-
- if ((block->flags & ACPI_WMI_EVENT) &&
- (block->notify_id == event)) {
- if (wblock->handler)
- wblock->handler(event, wblock->handler_data);
-
- acpi_bus_generate_netlink_event(
- device->pnp.device_class, dev_name(&device->dev),
- event, 0);
- break;
- }
- }
-}
-
-static int acpi_wmi_remove(struct acpi_device *device, int type)
-{
- acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify);
-
- acpi_remove_address_space_handler(device->handle,
- ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler);
-
- return 0;
-}
-
-static int __init acpi_wmi_add(struct acpi_device *device)
-{
- acpi_status status;
- int result = 0;
-
- status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY,
- acpi_wmi_notify, device);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing notify handler\n");
- return -ENODEV;
- }
-
- status = acpi_install_address_space_handler(device->handle,
- ACPI_ADR_SPACE_EC,
- &acpi_wmi_ec_space_handler,
- NULL, NULL);
- if (ACPI_FAILURE(status))
- return -ENODEV;
-
- status = parse_wdg(device->handle);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing EC region handler\n");
- return -ENODEV;
- }
-
- return result;
-}
-
-static int __init acpi_wmi_init(void)
-{
- acpi_status result;
-
- INIT_LIST_HEAD(&wmi_blocks.list);
-
- if (acpi_disabled)
- return -ENODEV;
-
- result = acpi_bus_register_driver(&acpi_wmi_driver);
-
- if (result < 0) {
- printk(KERN_INFO PREFIX "Error loading mapper\n");
- } else {
- printk(KERN_INFO PREFIX "Mapper loaded\n");
- }
-
- return result;
-}
-
-static void __exit acpi_wmi_exit(void)
-{
- struct list_head *p, *tmp;
- struct wmi_block *wblock;
-
- acpi_bus_unregister_driver(&acpi_wmi_driver);
-
- list_for_each_safe(p, tmp, &wmi_blocks.list) {
- wblock = list_entry(p, struct wmi_block, list);
-
- list_del(p);
- kfree(wblock);
- }
-
- printk(KERN_INFO PREFIX "Mapper unloaded\n");
-}
-
-subsys_initcall(acpi_wmi_init);
-module_exit(acpi_wmi_exit);