Merge branch 'next' into for-linus

Prepare first round of input updates for 3.20.

1 files changed, 70 insertions, 7 deletions

diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 5163ec13429..095c1774592 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -299,6 +299,21 @@ static void __arch_timer_setup(unsigned type,
 	clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
 }
 
+static void arch_timer_evtstrm_enable(int divider)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+
+	cntkctl &= ~ARCH_TIMER_EVT_TRIGGER_MASK;
+	/* Set the divider and enable virtual event stream */
+	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
+			| ARCH_TIMER_VIRT_EVT_EN;
+	arch_timer_set_cntkctl(cntkctl);
+	elf_hwcap |= HWCAP_EVTSTRM;
+#ifdef CONFIG_COMPAT
+	compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
+}
+
 static void arch_timer_configure_evtstream(void)
 {
 	int evt_stream_div, pos;
@@ -312,6 +327,23 @@ static void arch_timer_configure_evtstream(void)
 	arch_timer_evtstrm_enable(min(pos, 15));
 }
 
+static void arch_counter_set_user_access(void)
+{
+	u32 cntkctl = arch_timer_get_cntkctl();
+
+	/* Disable user access to the timers and the physical counter */
+	/* Also disable virtual event stream */
+	cntkctl &= ~(ARCH_TIMER_USR_PT_ACCESS_EN
+			| ARCH_TIMER_USR_VT_ACCESS_EN
+			| ARCH_TIMER_VIRT_EVT_EN
+			| ARCH_TIMER_USR_PCT_ACCESS_EN);
+
+	/* Enable user access to the virtual counter */
+	cntkctl |= ARCH_TIMER_USR_VCT_ACCESS_EN;
+
+	arch_timer_set_cntkctl(cntkctl);
+}
+
 static int arch_timer_setup(struct clock_event_device *clk)
 {
 	__arch_timer_setup(ARCH_CP15_TIMER, clk);
@@ -429,11 +461,22 @@ static void __init arch_counter_register(unsigned type)
 	u64 start_count;
 
 	/* Register the CP15 based counter if we have one */
-	if (type & ARCH_CP15_TIMER)
-		arch_timer_read_counter = arch_counter_get_cntvct;
-	else
+	if (type & ARCH_CP15_TIMER) {
+		if (IS_ENABLED(CONFIG_ARM64) || arch_timer_use_virtual)
+			arch_timer_read_counter = arch_counter_get_cntvct;
+		else
+			arch_timer_read_counter = arch_counter_get_cntpct;
+	} else {
 		arch_timer_read_counter = arch_counter_get_cntvct_mem;
 
+		/* If the clocksource name is "arch_sys_counter" the
+		 * VDSO will attempt to read the CP15-based counter.
+		 * Ensure this does not happen when CP15-based
+		 * counter is not available.
+		 */
+		clocksource_counter.name = "arch_mem_counter";
+	}
+
 	start_count = arch_timer_read_counter();
 	clocksource_register_hz(&clocksource_counter, arch_timer_rate);
 	cyclecounter.mult = clocksource_counter.mult;
@@ -616,17 +659,29 @@ static const struct of_device_id arch_timer_mem_of_match[] __initconst = {
 	{},
 };
 
+static bool __init
+arch_timer_probed(int type, const struct of_device_id *matches)
+{
+	struct device_node *dn;
+	bool probed = true;
+
+	dn = of_find_matching_node(NULL, matches);
+	if (dn && of_device_is_available(dn) && !(arch_timers_present & type))
+		probed = false;
+	of_node_put(dn);
+
+	return probed;
+}
+
 static void __init arch_timer_common_init(void)
 {
 	unsigned mask = ARCH_CP15_TIMER | ARCH_MEM_TIMER;
 
 	/* Wait until both nodes are probed if we have two timers */
 	if ((arch_timers_present & mask) != mask) {
-		if (of_find_matching_node(NULL, arch_timer_mem_of_match) &&
-				!(arch_timers_present & ARCH_MEM_TIMER))
+		if (!arch_timer_probed(ARCH_MEM_TIMER, arch_timer_mem_of_match))
 			return;
-		if (of_find_matching_node(NULL, arch_timer_of_match) &&
-				!(arch_timers_present & ARCH_CP15_TIMER))
+		if (!arch_timer_probed(ARCH_CP15_TIMER, arch_timer_of_match))
 			return;
 	}
 
@@ -650,6 +705,14 @@ static void __init arch_timer_init(struct device_node *np)
 	arch_timer_detect_rate(NULL, np);
 
 	/*
+	 * If we cannot rely on firmware initializing the timer registers then
+	 * we should use the physical timers instead.
+	 */
+	if (IS_ENABLED(CONFIG_ARM) &&
+	    of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
+			arch_timer_use_virtual = false;
+
+	/*
 	 * If HYP mode is available, we know that the physical timer
 	 * has been configured to be accessible from PL1. Use it, so
 	 * that a guest can use the virtual timer instead.