dmaengine: shdma: separate DMA headers.

Separate SH DMA headers into ones, commonly used by both drivers, and ones,
specific to each of them. This will make the future development of the
dmaengine driver easier.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 49 insertions, 30 deletions

diff --git a/drivers/dma/shdma.c b/drivers/dma/shdma.c
index ab12fa5a129..b419afaa238 100644
--- a/drivers/dma/shdma.c
+++ b/drivers/dma/shdma.c
@@ -24,8 +24,7 @@
 #include <linux/delay.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <cpu/dma.h>
-#include <asm/dma-sh.h>
+#include <asm/dmaengine.h>
 #include "shdma.h"
 
 /* DMA descriptor control */
@@ -38,15 +37,8 @@ enum sh_dmae_desc_status {
 };
 
 #define NR_DESCS_PER_CHANNEL 32
-/*
- * Define the default configuration for dual address memory-memory transfer.
- * The 0x400 value represents auto-request, external->external.
- *
- * And this driver set 4byte burst mode.
- * If you want to change mode, you need to change RS_DEFAULT of value.
- * (ex 1byte burst mode -> (RS_DUAL & ~TS_32)
- */
-#define RS_DEFAULT  (RS_DUAL)
+/* Default MEMCPY transfer size = 2^2 = 4 bytes */
+#define LOG2_DEFAULT_XFER_SIZE	2
 
 /* A bitmask with bits enough for enum sh_dmae_slave_chan_id */
 static unsigned long sh_dmae_slave_used[BITS_TO_LONGS(SHDMA_SLAVE_NUMBER)];
@@ -90,7 +82,7 @@ static int sh_dmae_rst(struct sh_dmae_device *shdev)
 	unsigned short dmaor;
 
 	sh_dmae_ctl_stop(shdev);
-	dmaor = dmaor_read(shdev) | DMAOR_INIT;
+	dmaor = dmaor_read(shdev) | shdev->pdata->dmaor_init;
 
 	dmaor_write(shdev, dmaor);
 	if (dmaor_read(shdev) & (DMAOR_AE | DMAOR_NMIF)) {
@@ -110,13 +102,36 @@ static bool dmae_is_busy(struct sh_dmae_chan *sh_chan)
 	return false; /* waiting */
 }
 
-static unsigned int ts_shift[] = TS_SHIFT;
-static inline unsigned int calc_xmit_shift(u32 chcr)
+static unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan, u32 chcr)
 {
-	int cnt = ((chcr & CHCR_TS_LOW_MASK) >> CHCR_TS_LOW_SHIFT) |
-		((chcr & CHCR_TS_HIGH_MASK) >> CHCR_TS_HIGH_SHIFT);
+	struct sh_dmae_device *shdev = container_of(sh_chan->common.device,
+						struct sh_dmae_device, common);
+	struct sh_dmae_pdata *pdata = shdev->pdata;
+	int cnt = ((chcr & pdata->ts_low_mask) >> pdata->ts_low_shift) |
+		((chcr & pdata->ts_high_mask) >> pdata->ts_high_shift);
+
+	if (cnt >= pdata->ts_shift_num)
+		cnt = 0;
 
-	return ts_shift[cnt];
+	return pdata->ts_shift[cnt];
+}
+
+static u32 log2size_to_chcr(struct sh_dmae_chan *sh_chan, int l2size)
+{
+	struct sh_dmae_device *shdev = container_of(sh_chan->common.device,
+						struct sh_dmae_device, common);
+	struct sh_dmae_pdata *pdata = shdev->pdata;
+	int i;
+
+	for (i = 0; i < pdata->ts_shift_num; i++)
+		if (pdata->ts_shift[i] == l2size)
+			break;
+
+	if (i == pdata->ts_shift_num)
+		i = 0;
+
+	return ((i << pdata->ts_low_shift) & pdata->ts_low_mask) |
+		((i << pdata->ts_high_shift) & pdata->ts_high_mask);
 }
 
 static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs *hw)
@@ -144,8 +159,13 @@ static void dmae_halt(struct sh_dmae_chan *sh_chan)
 
 static void dmae_init(struct sh_dmae_chan *sh_chan)
 {
-	u32 chcr = RS_DEFAULT; /* default is DUAL mode */
-	sh_chan->xmit_shift = calc_xmit_shift(chcr);
+	/*
+	 * Default configuration for dual address memory-memory transfer.
+	 * 0x400 represents auto-request.
+	 */
+	u32 chcr = DM_INC | SM_INC | 0x400 | log2size_to_chcr(sh_chan,
+						   LOG2_DEFAULT_XFER_SIZE);
+	sh_chan->xmit_shift = calc_xmit_shift(sh_chan, chcr);
 	sh_dmae_writel(sh_chan, chcr, CHCR);
 }
 
@@ -155,7 +175,7 @@ static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
 	if (dmae_is_busy(sh_chan))
 		return -EBUSY;
 
-	sh_chan->xmit_shift = calc_xmit_shift(val);
+	sh_chan->xmit_shift = calc_xmit_shift(sh_chan, val);
 	sh_dmae_writel(sh_chan, val, CHCR);
 
 	return 0;
@@ -285,9 +305,8 @@ static int sh_dmae_alloc_chan_resources(struct dma_chan *chan)
 
 		dmae_set_dmars(sh_chan, cfg->mid_rid);
 		dmae_set_chcr(sh_chan, cfg->chcr);
-	} else {
-		if ((sh_dmae_readl(sh_chan, CHCR) & 0x700) != 0x400)
-			dmae_set_chcr(sh_chan, RS_DEFAULT);
+	} else if ((sh_dmae_readl(sh_chan, CHCR) & 0xf00) != 0x400) {
+		dmae_init(sh_chan);
 	}
 
 	spin_lock_bh(&sh_chan->desc_lock);
@@ -757,7 +776,7 @@ static irqreturn_t sh_dmae_err(int irq, void *data)
 	sh_dmae_ctl_stop(shdev);
 
 	/* We cannot detect, which channel caused the error, have to reset all */
-	for (i = 0; i < MAX_DMA_CHANNELS; i++) {
+	for (i = 0; i < SH_DMAC_MAX_CHANNELS; i++) {
 		struct sh_dmae_chan *sh_chan = shdev->chan[i];
 		if (sh_chan) {
 			struct sh_desc *desc;
@@ -822,6 +841,9 @@ static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
 		return -ENOMEM;
 	}
 
+	/* copy struct dma_device */
+	new_sh_chan->common.device = &shdev->common;
+
 	new_sh_chan->dev = shdev->common.dev;
 	new_sh_chan->id = id;
 	new_sh_chan->irq = irq;
@@ -840,9 +862,6 @@ static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id,
 	INIT_LIST_HEAD(&new_sh_chan->ld_queue);
 	INIT_LIST_HEAD(&new_sh_chan->ld_free);
 
-	/* copy struct dma_device */
-	new_sh_chan->common.device = &shdev->common;
-
 	/* Add the channel to DMA device channel list */
 	list_add_tail(&new_sh_chan->common.device_node,
 			&shdev->common.channels);
@@ -896,8 +915,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 {
 	struct sh_dmae_pdata *pdata = pdev->dev.platform_data;
 	unsigned long irqflags = IRQF_DISABLED,
-		chan_flag[MAX_DMA_CHANNELS] = {};
-	int errirq, chan_irq[MAX_DMA_CHANNELS];
+		chan_flag[SH_DMAC_MAX_CHANNELS] = {};
+	int errirq, chan_irq[SH_DMAC_MAX_CHANNELS];
 	int err, i, irq_cnt = 0, irqres = 0;
 	struct sh_dmae_device *shdev;
 	struct resource *chan, *dmars, *errirq_res, *chanirq_res;
@@ -983,7 +1002,7 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 
 	shdev->common.dev = &pdev->dev;
 	/* Default transfer size of 32 bytes requires 32-byte alignment */
-	shdev->common.copy_align = 5;
+	shdev->common.copy_align = LOG2_DEFAULT_XFER_SIZE;
 
 #if defined(CONFIG_CPU_SH4)
 	chanirq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 1);