Merge tag 'v3.10-rc1' into stable/for-linus-3.10

Linux 3.10-rc1

* tag 'v3.10-rc1': (12273 commits)
  Linux 3.10-rc1
  [SCSI] qla2xxx: Update firmware link in Kconfig file.
  [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used
  [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type
  [SCSI] pm80xx: thermal, sas controller config and error handling update
  [SCSI] pm80xx: NCQ error handling changes
  [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers
  [SCSI] pm80xx: Changed module name and debug messages update
  [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it
  [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone
  [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files
  [SCSI] pm80xx: MSI-X implementation for using 64 interrupts
  [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve
  [SCSI] pm80xx: Multiple inbound/outbound queue configuration
  [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC
  [SCSI] lpfc: fix up Kconfig dependencies
  [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd
  dm cache: set config value
  dm cache: move config fns
  dm thin: generate event when metadata threshold passed
  ...

1 files changed, 12 insertions, 10 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 1ce45a0a2d3..58b4a53715c 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -199,10 +199,14 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 	return MODE_OK;
 }
 
-static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 const struct drm_display_mode *mode,
-				 struct drm_display_mode *adjusted_mode)
+static bool intel_crt_compute_config(struct intel_encoder *encoder,
+				     struct intel_crtc_config *pipe_config)
 {
+	struct drm_device *dev = encoder->base.dev;
+
+	if (HAS_PCH_SPLIT(dev))
+		pipe_config->has_pch_encoder = true;
+
 	return true;
 }
 
@@ -676,7 +680,6 @@ static void intel_crt_reset(struct drm_connector *connector)
  */
 
 static const struct drm_encoder_helper_funcs crt_encoder_funcs = {
-	.mode_fixup = intel_crt_mode_fixup,
 	.mode_set = intel_crt_mode_set,
 };
 
@@ -768,8 +771,11 @@ void intel_crt_init(struct drm_device *dev)
 	else
 		crt->adpa_reg = ADPA;
 
+	crt->base.compute_config = intel_crt_compute_config;
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
+	if (I915_HAS_HOTPLUG(dev))
+		crt->base.hpd_pin = HPD_CRT;
 	if (HAS_DDI(dev))
 		crt->base.get_hw_state = intel_ddi_get_hw_state;
 	else
@@ -781,18 +787,14 @@ void intel_crt_init(struct drm_device *dev)
 
 	drm_sysfs_connector_add(connector);
 
-	if (I915_HAS_HOTPLUG(dev))
-		connector->polled = DRM_CONNECTOR_POLL_HPD;
-	else
-		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+	if (!I915_HAS_HOTPLUG(dev))
+		intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
 
 	/*
 	 * Configure the automatic hotplug detection stuff
 	 */
 	crt->force_hotplug_required = 0;
 
-	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
-
 	/*
 	 * TODO: find a proper way to discover whether we need to set the the
 	 * polarity and link reversal bits or not, instead of relying on the