Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "One of the smaller drm -next pulls in ages!

  Ben (nouveau) has a rewrite in progress but we decided to leave it
  stew for another cycle, so just some fixes from him.

   - radeon: lots of documentation work, fixes, more ring and locking
     changes, pcie gen2, more dp fixes.
   - i915: haswell features, gpu reset fixes, /dev/agpgart removal on
     machines that we never used it on, more VGA/HDP fix., more DP fixes
   - drm core: cleanups from Daniel, sis 64-bit fixes, range allocator
     colouring.

  but yeah fairly quiet merge this time, probably because I missed half
  of it!"

Trivial add-add conflict in include/linux/pci_regs.h

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (255 commits)
  drm/nouveau: init vblank requests list
  drm/nv50: extend vblank semaphore to generic dmaobj + offset pair
  drm/nouveau: mark most of our ioctls as deprecated, move to compat layer
  drm/nouveau: move current gpuobj code out of nouveau_object.c
  drm/nouveau/gem: fix object reference leak in a failure path
  drm/nv50: rename INVALID_QUERY_OR_TEXTURE error to INVALID_OPERATION
  drm/nv84: decode PCRYPT errors
  drm/nouveau: dcb table quirk for fdo#50830
  nouveau: Fix alignment requirements on src and dst addresses
  drm/i915: unbreak lastclose for failed driver init
  drm/i915: Set the context before setting up regs for the context.
  drm/i915: constify mode in crtc_mode_fixup
  drm/i915/lvds: ditch ->prepare special case
  drm/i915: dereferencing an error pointer
  drm/i915: fix invalid reference handling of the default ctx obj
  drm/i915: Add -EIO to the list of known errors for __wait_seqno
  drm/i915: Flush the context object from the CPU caches upon switching
  drm/radeon: fix dpms on/off on trinity/aruba v2
  drm/radeon: on hotplug force link training to happen (v2)
  drm/radeon: fix hotplug of DP to DVI|HDMI passive adapters (v2)
  ...

1 files changed, 69 insertions, 23 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 75a70c46ef1..7ed4a41c396 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -88,6 +88,9 @@ static void gmch_crt_dpms(struct drm_encoder *encoder, int mode)
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;
 
+	if (IS_VALLEYVIEW(dev) && mode != DRM_MODE_DPMS_ON)
+		mode = DRM_MODE_DPMS_OFF;
+
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		temp |= ADPA_DAC_ENABLE;
@@ -129,7 +132,7 @@ static int intel_crt_mode_valid(struct drm_connector *connector,
 }
 
 static bool intel_crt_mode_fixup(struct drm_encoder *encoder,
-				 struct drm_display_mode *mode,
+				 const struct drm_display_mode *mode,
 				 struct drm_display_mode *adjusted_mode)
 {
 	return true;
@@ -230,6 +233,42 @@ static bool intel_ironlake_crt_detect_hotplug(struct drm_connector *connector)
 	return ret;
 }
 
+static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
+{
+	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	u32 adpa;
+	bool ret;
+	u32 save_adpa;
+
+	save_adpa = adpa = I915_READ(ADPA);
+	DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
+
+	adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
+
+	I915_WRITE(ADPA, adpa);
+
+	if (wait_for((I915_READ(ADPA) & ADPA_CRT_HOTPLUG_FORCE_TRIGGER) == 0,
+		     1000)) {
+		DRM_DEBUG_KMS("timed out waiting for FORCE_TRIGGER");
+		I915_WRITE(ADPA, save_adpa);
+	}
+
+	/* Check the status to see if both blue and green are on now */
+	adpa = I915_READ(ADPA);
+	if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
+		ret = true;
+	else
+		ret = false;
+
+	DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
+
+	/* FIXME: debug force function and remove */
+	ret = true;
+
+	return ret;
+}
+
 /**
  * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect CRT presence.
  *
@@ -249,6 +288,9 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 	if (HAS_PCH_SPLIT(dev))
 		return intel_ironlake_crt_detect_hotplug(connector);
 
+	if (IS_VALLEYVIEW(dev))
+		return valleyview_crt_detect_hotplug(connector);
+
 	/*
 	 * On 4 series desktop, CRT detect sequence need to be done twice
 	 * to get a reliable result.
@@ -288,39 +330,34 @@ static bool intel_crt_detect_ddc(struct drm_connector *connector)
 {
 	struct intel_crt *crt = intel_attached_crt(connector);
 	struct drm_i915_private *dev_priv = crt->base.base.dev->dev_private;
+	struct edid *edid;
+	struct i2c_adapter *i2c;
 
-	/* CRT should always be at 0, but check anyway */
-	if (crt->base.type != INTEL_OUTPUT_ANALOG)
-		return false;
+	BUG_ON(crt->base.type != INTEL_OUTPUT_ANALOG);
+
+	i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
+	edid = drm_get_edid(connector, i2c);
 
-	if (intel_ddc_probe(&crt->base, dev_priv->crt_ddc_pin)) {
-		struct edid *edid;
-		bool is_digital = false;
-		struct i2c_adapter *i2c;
+	if (edid) {
+		bool is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
 
-		i2c = intel_gmbus_get_adapter(dev_priv, dev_priv->crt_ddc_pin);
-		edid = drm_get_edid(connector, i2c);
 		/*
 		 * This may be a DVI-I connector with a shared DDC
 		 * link between analog and digital outputs, so we
 		 * have to check the EDID input spec of the attached device.
-		 *
-		 * On the other hand, what should we do if it is a broken EDID?
 		 */
-		if (edid != NULL) {
-			is_digital = edid->input & DRM_EDID_INPUT_DIGITAL;
-			connector->display_info.raw_edid = NULL;
-			kfree(edid);
-		}
-
 		if (!is_digital) {
 			DRM_DEBUG_KMS("CRT detected via DDC:0x50 [EDID]\n");
 			return true;
-		} else {
-			DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 		}
+
+		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
+	} else {
+		DRM_DEBUG_KMS("CRT not detected via DDC:0x50 [no valid EDID found]\n");
 	}
 
+	kfree(edid);
+
 	return false;
 }
 
@@ -453,18 +490,27 @@ intel_crt_detect(struct drm_connector *connector, bool force)
 	struct intel_load_detect_pipe tmp;
 
 	if (I915_HAS_HOTPLUG(dev)) {
+		/* We can not rely on the HPD pin always being correctly wired
+		 * up, for example many KVM do not pass it through, and so
+		 * only trust an assertion that the monitor is connected.
+		 */
 		if (intel_crt_detect_hotplug(connector)) {
 			DRM_DEBUG_KMS("CRT detected via hotplug\n");
 			return connector_status_connected;
-		} else {
+		} else
 			DRM_DEBUG_KMS("CRT not detected via hotplug\n");
-			return connector_status_disconnected;
-		}
 	}
 
 	if (intel_crt_detect_ddc(connector))
 		return connector_status_connected;
 
+	/* Load detection is broken on HPD capable machines. Whoever wants a
+	 * broken monitor (without edid) to work behind a broken kvm (that fails
+	 * to have the right resistors for HP detection) needs to fix this up.
+	 * For now just bail out. */
+	if (I915_HAS_HOTPLUG(dev))
+		return connector_status_disconnected;
+
 	if (!force)
 		return connector->status;