Merge tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
"Probably the last feature pull for 3.9, there's some fixes outstanding
thought that I'd like to sneak in. And maybe 3.8 takes a bit longer ...
Anyway, highlights of this pull:
- Kill the horrible IS_DISPLAYREG hack to handle the mmio offset movements
  on vlv, big thanks to Ville.
- Dynamic power well support for Haswell, shaves away a bit when only
  using the eDP port on pipe A (Paulo). Plus unclaimed register fixes
  uncovered by this.
- Clarifications of the gpu hang/reset state transitions, hopefully fixing
  a few spurious -EIO deaths in userspace.
- Haswell ELD fixes.
- Some more (pp)gtt cleanups from Ben.
- A few smaller things all over.

Plus all the stuff from the previous rather small pull request:
- Broadcast RBG improvements and reduced color range fixes from Ville.
- Ben is on a "kill legacy gtt code for good" spree, first pile of patches
  included.
- No-relocs and bo lut improvements for faster execbuf from Chris.
- Some refactorings from Imre."

* tag 'drm-intel-next-2013-02-01' of git://people.freedesktop.org/~danvet/drm-intel: (101 commits)
  GPU/i915: Fix acpi_bus_get_device() check in drivers/gpu/drm/i915/intel_opregion.c
  drm/i915: Set the SR01 "screen off" bit in i915_redisable_vga() too
  drm/i915: Kill IS_DISPLAYREG()
  drm/i915: Introduce i915_vgacntrl_reg()
  drm/i915: gen6_gmch_remove can be static
  drm/i915: dynamic Haswell display power well support
  drm/i915: check the power down well on assert_pipe()
  drm/i915: don't send DP "idle" pattern before "normal" on HSW PORT_A
  drm/i915: don't run hsw power well code on !hsw
  drm/i915: kill cargo-culted locking from power well code
  drm/i915: Only run idle processing from i915_gem_retire_requests_worker
  drm/i915: Fix CAGF for HSW
  drm/i915: Reclaim GTT space for failed PPGTT
  drm/i915: remove intel_gtt structure
  drm/i915: Add probe and remove to the gtt ops
  drm/i915: extract hw ppgtt setup/cleanup code
  drm/i915: pte_encode is gen6+
  drm/i915: vfuncs for ppgtt
  drm/i915: vfuncs for gtt_clear_range/insert_entries
  drm/i915: Error state should print /sys/kernel/debug
  ...

1 files changed, 28 insertions, 1 deletions

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 2e904a5cd6c..cedf4ab5ff1 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -677,6 +677,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder,
 	DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n",
 		      port_name(port), pipe_name(pipe));
 
+	intel_crtc->eld_vld = false;
 	if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
@@ -987,7 +988,13 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
 	if (cpu_transcoder == TRANSCODER_EDP) {
 		switch (pipe) {
 		case PIPE_A:
-			temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+			/* Can only use the always-on power well for eDP when
+			 * not using the panel fitter, and when not using motion
+			  * blur mitigation (which we don't support). */
+			if (dev_priv->pch_pf_size)
+				temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+			else
+				temp |= TRANS_DDI_EDP_INPUT_A_ON;
 			break;
 		case PIPE_B:
 			temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
@@ -1287,10 +1294,14 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
 static void intel_enable_ddi(struct intel_encoder *intel_encoder)
 {
 	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
 	struct drm_device *dev = encoder->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	enum port port = intel_ddi_get_encoder_port(intel_encoder);
 	int type = intel_encoder->type;
+	uint32_t tmp;
 
 	if (type == INTEL_OUTPUT_HDMI) {
 		/* In HDMI/DVI mode, the port width, and swing/emphasis values
@@ -1303,18 +1314,34 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder)
 
 		ironlake_edp_backlight_on(intel_dp);
 	}
+
+	if (intel_crtc->eld_vld) {
+		tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+		tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+		I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+	}
 }
 
 static void intel_disable_ddi(struct intel_encoder *intel_encoder)
 {
 	struct drm_encoder *encoder = &intel_encoder->base;
+	struct drm_crtc *crtc = encoder->crtc;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
 	int type = intel_encoder->type;
+	struct drm_device *dev = encoder->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	uint32_t tmp;
 
 	if (type == INTEL_OUTPUT_EDP) {
 		struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 
 		ironlake_edp_backlight_off(intel_dp);
 	}
+
+	tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+	tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+	I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
 }
 
 int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)