Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD KFD driver merge

     This is the AMD HSA interface for exposing a lowlevel interface for
     GPGPU use.  They have an open source userspace built on top of this
     interface, and the code looks as good as it was going to get out of
     tree.

   - Initial atomic modesetting work

     The need for an atomic modesetting interface to allow userspace to
     try and send a complete set of modesetting state to the driver has
     arisen, and been suffering from neglect this past year.  No more,
     the start of the common code and changes for msm driver to use it
     are in this tree.  Ongoing work to get the userspace ioctl finished
     and the code clean will probably wait until next kernel.

   - DisplayID 1.3 and tiled monitor exposed to userspace.

     Tiled monitor property is now exposed for userspace to make use of.

   - Rockchip drm driver merged.

   - imx gpu driver moved out of staging

  Other stuff:

   - core:
        panel - MIPI DSI + new panels.
        expose suggested x/y properties for virtual GPUs

   - i915:
        Initial Skylake (SKL) support
        gen3/4 reset work
        start of dri1/ums removal
        infoframe tracking
        fixes for lots of things.

   - nouveau:
        tegra k1 voltage support
        GM204 modesetting support
        GT21x memory reclocking work

   - radeon:
        CI dpm fixes
        GPUVM improvements
        Initial DPM fan control

   - rcar-du:
        HDMI support added
        removed some support for old boards
        slave encoder driver for Analog Devices adv7511

   - exynos:
        Exynos4415 SoC support

   - msm:
        a4xx gpu support
        atomic helper conversion

   - tegra:
        iommu support
        universal plane support
        ganged-mode DSI support

   - sti:
        HDMI i2c improvements

   - vmwgfx:
        some late fixes.

   - qxl:
        use suggested x/y properties"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (969 commits)
  drm: sti: fix module compilation issue
  drm/i915: save/restore GMBUS freq across suspend/resume on gen4
  drm: sti: correctly cleanup CRTC and planes
  drm: sti: add HQVDP plane
  drm: sti: add cursor plane
  drm: sti: enable auxiliary CRTC
  drm: sti: fix delay in VTG programming
  drm: sti: prepare sti_tvout to support auxiliary crtc
  drm: sti: use drm_crtc_vblank_{on/off} instead of drm_vblank_{on/off}
  drm: sti: fix hdmi avi infoframe
  drm: sti: remove event lock while disabling vblank
  drm: sti: simplify gdp code
  drm: sti: clear all mixer control
  drm: sti: remove gpio for HDMI hot plug detection
  drm: sti: allow to change hdmi ddc i2c adapter
  drm/doc: Document drm_add_modes_noedid() usage
  drm/i915: Remove '& 0xffff' from the mask given to WA_REG()
  drm/i915: Invert the mask and val arguments in wa_add() and WA_REG()
  drm: Zero out DRM object memory upon cleanup
  drm/i915/bdw: Fix the write setting up the WIZ hashing mode
  ...

1 files changed, 279 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/intel_frontbuffer.c b/drivers/gpu/drm/i915/intel_frontbuffer.c
new file mode 100644
index 00000000000..79f6d72179c
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_frontbuffer.c
@@ -0,0 +1,279 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ * Authors:
+ *	Daniel Vetter <daniel.vetter@ffwll.ch>
+ */
+
+/**
+ * DOC: frontbuffer tracking
+ *
+ * Many features require us to track changes to the currently active
+ * frontbuffer, especially rendering targeted at the frontbuffer.
+ *
+ * To be able to do so GEM tracks frontbuffers using a bitmask for all possible
+ * frontbuffer slots through i915_gem_track_fb(). The function in this file are
+ * then called when the contents of the frontbuffer are invalidated, when
+ * frontbuffer rendering has stopped again to flush out all the changes and when
+ * the frontbuffer is exchanged with a flip. Subsystems interested in
+ * frontbuffer changes (e.g. PSR, FBC, DRRS) should directly put their callbacks
+ * into the relevant places and filter for the frontbuffer slots that they are
+ * interested int.
+ *
+ * On a high level there are two types of powersaving features. The first one
+ * work like a special cache (FBC and PSR) and are interested when they should
+ * stop caching and when to restart caching. This is done by placing callbacks
+ * into the invalidate and the flush functions: At invalidate the caching must
+ * be stopped and at flush time it can be restarted. And maybe they need to know
+ * when the frontbuffer changes (e.g. when the hw doesn't initiate an invalidate
+ * and flush on its own) which can be achieved with placing callbacks into the
+ * flip functions.
+ *
+ * The other type of display power saving feature only cares about busyness
+ * (e.g. DRRS). In that case all three (invalidate, flush and flip) indicate
+ * busyness. There is no direct way to detect idleness. Instead an idle timer
+ * work delayed work should be started from the flush and flip functions and
+ * cancelled as soon as busyness is detected.
+ *
+ * Note that there's also an older frontbuffer activity tracking scheme which
+ * just tracks general activity. This is done by the various mark_busy and
+ * mark_idle functions. For display power management features using these
+ * functions is deprecated and should be avoided.
+ */
+
+#include <drm/drmP.h>
+
+#include "intel_drv.h"
+#include "i915_drv.h"
+
+static void intel_increase_pllclock(struct drm_device *dev,
+				    enum pipe pipe)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	int dpll_reg = DPLL(pipe);
+	int dpll;
+
+	if (!HAS_GMCH_DISPLAY(dev))
+		return;
+
+	if (!dev_priv->lvds_downclock_avail)
+		return;
+
+	dpll = I915_READ(dpll_reg);
+	if (!HAS_PIPE_CXSR(dev) && (dpll & DISPLAY_RATE_SELECT_FPA1)) {
+		DRM_DEBUG_DRIVER("upclocking LVDS\n");
+
+		assert_panel_unlocked(dev_priv, pipe);
+
+		dpll &= ~DISPLAY_RATE_SELECT_FPA1;
+		I915_WRITE(dpll_reg, dpll);
+		intel_wait_for_vblank(dev, pipe);
+
+		dpll = I915_READ(dpll_reg);
+		if (dpll & DISPLAY_RATE_SELECT_FPA1)
+			DRM_DEBUG_DRIVER("failed to upclock LVDS!\n");
+	}
+}
+
+/**
+ * intel_mark_fb_busy - mark given planes as busy
+ * @dev: DRM device
+ * @frontbuffer_bits: bits for the affected planes
+ * @ring: optional ring for asynchronous commands
+ *
+ * This function gets called every time the screen contents change. It can be
+ * used to keep e.g. the update rate at the nominal refresh rate with DRRS.
+ */
+static void intel_mark_fb_busy(struct drm_device *dev,
+			       unsigned frontbuffer_bits,
+			       struct intel_engine_cs *ring)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	enum pipe pipe;
+
+	if (!i915.powersave)
+		return;
+
+	for_each_pipe(dev_priv, pipe) {
+		if (!(frontbuffer_bits & INTEL_FRONTBUFFER_ALL_MASK(pipe)))
+			continue;
+
+		intel_increase_pllclock(dev, pipe);
+		if (ring && intel_fbc_enabled(dev))
+			ring->fbc_dirty = true;
+	}
+}
+
+/**
+ * intel_fb_obj_invalidate - invalidate frontbuffer object
+ * @obj: GEM object to invalidate
+ * @ring: set for asynchronous rendering
+ *
+ * This function gets called every time rendering on the given object starts and
+ * frontbuffer caching (fbc, low refresh rate for DRRS, panel self refresh) must
+ * be invalidated. If @ring is non-NULL any subsequent invalidation will be delayed
+ * until the rendering completes or a flip on this frontbuffer plane is
+ * scheduled.
+ */
+void intel_fb_obj_invalidate(struct drm_i915_gem_object *obj,
+			     struct intel_engine_cs *ring)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	if (!obj->frontbuffer_bits)
+		return;
+
+	if (ring) {
+		mutex_lock(&dev_priv->fb_tracking.lock);
+		dev_priv->fb_tracking.busy_bits
+			|= obj->frontbuffer_bits;
+		dev_priv->fb_tracking.flip_bits
+			&= ~obj->frontbuffer_bits;
+		mutex_unlock(&dev_priv->fb_tracking.lock);
+	}
+
+	intel_mark_fb_busy(dev, obj->frontbuffer_bits, ring);
+
+	intel_psr_invalidate(dev, obj->frontbuffer_bits);
+}
+
+/**
+ * intel_frontbuffer_flush - flush frontbuffer
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called every time rendering on the given planes has
+ * completed and frontbuffer caching can be started again. Flushes will get
+ * delayed if they're blocked by some outstanding asynchronous rendering.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flush(struct drm_device *dev,
+			     unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	/* Delay flushing when rings are still busy.*/
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	frontbuffer_bits &= ~dev_priv->fb_tracking.busy_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+
+	intel_mark_fb_busy(dev, frontbuffer_bits, NULL);
+
+	intel_psr_flush(dev, frontbuffer_bits);
+
+	/*
+	 * FIXME: Unconditional fbc flushing here is a rather gross hack and
+	 * needs to be reworked into a proper frontbuffer tracking scheme like
+	 * psr employs.
+	 */
+	if (dev_priv->fbc.need_sw_cache_clean) {
+		dev_priv->fbc.need_sw_cache_clean = false;
+		bdw_fbc_sw_flush(dev, FBC_REND_CACHE_CLEAN);
+	}
+}
+
+/**
+ * intel_fb_obj_flush - flush frontbuffer object
+ * @obj: GEM object to flush
+ * @retire: set when retiring asynchronous rendering
+ *
+ * This function gets called every time rendering on the given object has
+ * completed and frontbuffer caching can be started again. If @retire is true
+ * then any delayed flushes will be unblocked.
+ */
+void intel_fb_obj_flush(struct drm_i915_gem_object *obj,
+			bool retire)
+{
+	struct drm_device *dev = obj->base.dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	unsigned frontbuffer_bits;
+
+	WARN_ON(!mutex_is_locked(&dev->struct_mutex));
+
+	if (!obj->frontbuffer_bits)
+		return;
+
+	frontbuffer_bits = obj->frontbuffer_bits;
+
+	if (retire) {
+		mutex_lock(&dev_priv->fb_tracking.lock);
+		/* Filter out new bits since rendering started. */
+		frontbuffer_bits &= dev_priv->fb_tracking.busy_bits;
+
+		dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
+		mutex_unlock(&dev_priv->fb_tracking.lock);
+	}
+
+	intel_frontbuffer_flush(dev, frontbuffer_bits);
+}
+
+/**
+ * intel_frontbuffer_flip_prepare - prepare asynchronous frontbuffer flip
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called after scheduling a flip on @obj. The actual
+ * frontbuffer flushing will be delayed until completion is signalled with
+ * intel_frontbuffer_flip_complete. If an invalidate happens in between this
+ * flush will be cancelled.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flip_prepare(struct drm_device *dev,
+				    unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	dev_priv->fb_tracking.flip_bits |= frontbuffer_bits;
+	/* Remove stale busy bits due to the old buffer. */
+	dev_priv->fb_tracking.busy_bits &= ~frontbuffer_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+}
+
+/**
+ * intel_frontbuffer_flip_complete - complete asynchronous frontbuffer flip
+ * @dev: DRM device
+ * @frontbuffer_bits: frontbuffer plane tracking bits
+ *
+ * This function gets called after the flip has been latched and will complete
+ * on the next vblank. It will execute the flush if it hasn't been cancelled yet.
+ *
+ * Can be called without any locks held.
+ */
+void intel_frontbuffer_flip_complete(struct drm_device *dev,
+				     unsigned frontbuffer_bits)
+{
+	struct drm_i915_private *dev_priv = dev->dev_private;
+
+	mutex_lock(&dev_priv->fb_tracking.lock);
+	/* Mask any cancelled flips. */
+	frontbuffer_bits &= dev_priv->fb_tracking.flip_bits;
+	dev_priv->fb_tracking.flip_bits &= ~frontbuffer_bits;
+	mutex_unlock(&dev_priv->fb_tracking.lock);
+
+	intel_frontbuffer_flush(dev, frontbuffer_bits);
+}