drm/radeon/hdmi: DCE2: update setmode

Recent RE efforts revealed ops performed by fglrx during HDMI setup.
This mostly adds masks to r/w ops plus few single missing bits.

This has been tested for possible regressions on:
1) DCE2 HD2400 (RV610)
2) DCE3 HD3470 (RV620)

For a reference and details see:
https://bugzilla.kernel.org/show_bug.cgi?id=76231

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1 files changed, 75 insertions, 37 deletions

diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index a828222e816..a90914f3426 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -142,14 +142,26 @@ void r600_hdmi_update_ACR(struct drm_encoder *encoder, uint32_t clock)
 	struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
 	uint32_t offset = dig->afmt->offset;
 
-	WREG32(HDMI0_ACR_32_0 + offset, HDMI0_ACR_CTS_32(acr.cts_32khz));
-	WREG32(HDMI0_ACR_32_1 + offset, acr.n_32khz);
-
-	WREG32(HDMI0_ACR_44_0 + offset, HDMI0_ACR_CTS_44(acr.cts_44_1khz));
-	WREG32(HDMI0_ACR_44_1 + offset, acr.n_44_1khz);
-
-	WREG32(HDMI0_ACR_48_0 + offset, HDMI0_ACR_CTS_48(acr.cts_48khz));
-	WREG32(HDMI0_ACR_48_1 + offset, acr.n_48khz);
+	WREG32_P(HDMI0_ACR_32_0 + offset,
+		 HDMI0_ACR_CTS_32(acr.cts_32khz),
+		 ~HDMI0_ACR_CTS_32_MASK);
+	WREG32_P(HDMI0_ACR_32_1 + offset,
+		 HDMI0_ACR_N_32(acr.n_32khz),
+		 ~HDMI0_ACR_N_32_MASK);
+
+	WREG32_P(HDMI0_ACR_44_0 + offset,
+		 HDMI0_ACR_CTS_44(acr.cts_44_1khz),
+		 ~HDMI0_ACR_CTS_44_MASK);
+	WREG32_P(HDMI0_ACR_44_1 + offset,
+		 HDMI0_ACR_N_44(acr.n_44_1khz),
+		 ~HDMI0_ACR_N_44_MASK);
+
+	WREG32_P(HDMI0_ACR_48_0 + offset,
+		 HDMI0_ACR_CTS_48(acr.cts_48khz),
+		 ~HDMI0_ACR_CTS_48_MASK);
+	WREG32_P(HDMI0_ACR_48_1 + offset,
+		 HDMI0_ACR_N_48(acr.n_48khz),
+		 ~HDMI0_ACR_N_48_MASK);
 }
 
 /*
@@ -349,39 +361,44 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 
 	r600_audio_set_dto(encoder, mode->clock);
 
-	WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
-	       HDMI0_NULL_SEND); /* send null packets when required */
-
-	WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset,
-	       HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
-	       HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
-	       HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
-	       HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
+	WREG32_P(HDMI0_AUDIO_PACKET_CONTROL + offset,
+		 HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */
+		 HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */
+		 HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */
+		 HDMI0_60958_CS_UPDATE, /* allow 60958 channel status fields to be updated */
+		 ~(HDMI0_AUDIO_SAMPLE_SEND |
+		   HDMI0_AUDIO_DELAY_EN_MASK |
+		   HDMI0_AUDIO_PACKETS_PER_LINE_MASK |
+		   HDMI0_60958_CS_UPDATE));
 
 	/* DCE 3.0 uses register that's normally for CRC_CONTROL */
 	acr_ctl = ASIC_IS_DCE3(rdev) ? DCE3_HDMI0_ACR_PACKET_CONTROL :
 				       HDMI0_ACR_PACKET_CONTROL;
-	WREG32(acr_ctl + offset,
-	       HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
-	       HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */
-
-	WREG32(HDMI0_VBI_PACKET_CONTROL + offset,
-	       HDMI0_NULL_SEND | /* send null packets when required */
-	       HDMI0_GC_SEND | /* send general control packets */
-	       HDMI0_GC_CONT); /* send general control packets every frame */
-
-	/* TODO: HDMI0_AUDIO_INFO_UPDATE */
-	WREG32(HDMI0_INFOFRAME_CONTROL0 + offset,
-	       HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
-	       HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
-	       HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
-	       HDMI0_AUDIO_INFO_CONT); /* send audio info frames every frame/field */
-
-	WREG32(HDMI0_INFOFRAME_CONTROL1 + offset,
-	       HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
-	       HDMI0_AUDIO_INFO_LINE(2)); /* anything other than 0 */
-
-	WREG32(HDMI0_GC + offset, 0); /* unset HDMI0_GC_AVMUTE */
+	WREG32_P(acr_ctl + offset,
+		 HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */
+		 HDMI0_ACR_AUTO_SEND, /* allow hw to sent ACR packets when required */
+		 ~(HDMI0_ACR_SOURCE |
+		   HDMI0_ACR_AUTO_SEND));
+
+	WREG32_OR(HDMI0_VBI_PACKET_CONTROL + offset,
+		  HDMI0_NULL_SEND | /* send null packets when required */
+		  HDMI0_GC_SEND | /* send general control packets */
+		  HDMI0_GC_CONT); /* send general control packets every frame */
+
+	WREG32_OR(HDMI0_INFOFRAME_CONTROL0 + offset,
+		  HDMI0_AVI_INFO_SEND | /* enable AVI info frames */
+		  HDMI0_AVI_INFO_CONT | /* send AVI info frames every frame/field */
+		  HDMI0_AUDIO_INFO_SEND | /* enable audio info frames (frames won't be set until audio is enabled) */
+		  HDMI0_AUDIO_INFO_UPDATE); /* required for audio info values to be updated */
+
+	WREG32_P(HDMI0_INFOFRAME_CONTROL1 + offset,
+		 HDMI0_AVI_INFO_LINE(2) | /* anything other than 0 */
+		 HDMI0_AUDIO_INFO_LINE(2), /* anything other than 0 */
+		 ~(HDMI0_AVI_INFO_LINE_MASK |
+		   HDMI0_AUDIO_INFO_LINE_MASK));
+
+	WREG32_AND(HDMI0_GC + offset,
+		   ~HDMI0_GC_AVMUTE); /* unset HDMI0_GC_AVMUTE */
 
 	err = drm_hdmi_avi_infoframe_from_display_mode(&frame, mode);
 	if (err < 0) {
@@ -396,8 +413,29 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
 	}
 
 	r600_hdmi_update_avi_infoframe(encoder, buffer, sizeof(buffer));
+
+	/* fglrx duplicates INFOFRAME_CONTROL0 & INFOFRAME_CONTROL1 ops here */
+
+	WREG32_AND(HDMI0_GENERIC_PACKET_CONTROL + offset,
+		   ~(HDMI0_GENERIC0_SEND |
+		     HDMI0_GENERIC0_CONT |
+		     HDMI0_GENERIC0_UPDATE |
+		     HDMI0_GENERIC1_SEND |
+		     HDMI0_GENERIC1_CONT |
+		     HDMI0_GENERIC0_LINE_MASK |
+		     HDMI0_GENERIC1_LINE_MASK));
+
 	r600_hdmi_update_ACR(encoder, mode->clock);
 
+	WREG32_P(HDMI0_60958_0 + offset,
+		 HDMI0_60958_CS_CHANNEL_NUMBER_L(1),
+		 ~(HDMI0_60958_CS_CHANNEL_NUMBER_L_MASK |
+		   HDMI0_60958_CS_CLOCK_ACCURACY_MASK));
+
+	WREG32_P(HDMI0_60958_1 + offset,
+		 HDMI0_60958_CS_CHANNEL_NUMBER_R(2),
+		 ~HDMI0_60958_CS_CHANNEL_NUMBER_R_MASK);
+
 	/* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
 	WREG32(HDMI0_RAMP_CONTROL0 + offset, 0x00FFFFFF);
 	WREG32(HDMI0_RAMP_CONTROL1 + offset, 0x007FFFFF);