diff options
| author | Jean Delvare <khali@linux-fr.org> | 2011-05-25 20:43:33 +0200 |
|---|---|---|
| committer | Jean Delvare <khali@endymion.delvare> | 2011-05-25 20:43:33 +0200 |
| commit | ec693fe5287e1791f4d206e81ebdfdc7d1f8f6b9 (patch) | |
| tree | 6f261c6f8a23fdd604f6a7b2f31cac906b0533ea /drivers/hwmon | |
| parent | 5b0380c94a2e888b7858fbec6fc3ac623bc9b05a (diff) | |
hwmon: (abituguru) Depend on DMI
The abituguru drivers are only built on X86, where DMI support is now
enabled by default. So let these drivers depend on DMI, for the
following gains:
* Robustness and safety. Detection of these devices is weak and uses
non-standard methods, it should really be limited to Abit boards
unless the user explicitly asks otherwise.
* Code simplicity. The code is easier to read without ifdefs.
* Better build testing coverage. Now there's only one way to build the
drivers, so no risk of build failure on exotic systems.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Alistair John Strachan <alistair@devzero.co.uk>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/hwmon/abituguru.c | 3 | ||||
| -rw-r--r-- | drivers/hwmon/abituguru3.c | 13 |
3 files changed, 2 insertions, 18 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 12bfc073fc5..900409615ae 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -41,7 +41,7 @@ comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI && EXPERIMENTAL help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -56,7 +56,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && EXPERIMENTAL + depends on X86 && DMI && EXPERIMENTAL help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c index e7d4c4687f0..65a35cf5b3c 100644 --- a/drivers/hwmon/abituguru.c +++ b/drivers/hwmon/abituguru.c @@ -1448,15 +1448,12 @@ static int __init abituguru_init(void) { int address, err; struct resource res = { .flags = IORESOURCE_IO }; - -#ifdef CONFIG_DMI const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); /* safety check, refuse to load on non Abit motherboards */ if (!force && (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/"))) return -ENODEV; -#endif address = abituguru_detect(); if (address < 0) diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index e89d572e332..d30855a7578 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -1119,8 +1119,6 @@ static struct platform_driver abituguru3_driver = { .resume = abituguru3_resume }; -#ifdef CONFIG_DMI - static int __init abituguru3_dmi_detect(void) { const char *board_vendor, *board_name; @@ -1159,15 +1157,6 @@ static int __init abituguru3_dmi_detect(void) return 1; } -#else /* !CONFIG_DMI */ - -static inline int abituguru3_dmi_detect(void) -{ - return 1; -} - -#endif /* CONFIG_DMI */ - /* FIXME: Manual detection should die eventually; we need to collect stable * DMI model names first before we can rely entirely on CONFIG_DMI. */ @@ -1216,10 +1205,8 @@ static int __init abituguru3_init(void) if (err) return err; -#ifdef CONFIG_DMI pr_warn("this motherboard was not detected using DMI. " "Please send the output of \"dmidecode\" to the abituguru3 maintainer (see MAINTAINERS)\n"); -#endif } err = platform_driver_register(&abituguru3_driver); |