Merge commit '5bc66170dc486556a1e36fd384463536573f4b82' into x86/urgent

From Borislav Petkov <bp@amd64.org>:

Below is a RAS fix which reverts the addition of a sysfs attribute
which we agreed is not needed, post-factum. And this should go in now
because that sysfs attribute is going to end up in 3.7 otherwise and
thus exposed to userspace; removing it then would be a lot harder.

This is done as a merge rather than a simple patch/cherry-pick since
the baseline for this patch was not in the previous x86/urgent.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

1 files changed, 17 insertions, 16 deletions

diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1063f..f892a424009 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -46,14 +46,19 @@ static int i2c_debug;
 #define pca_set_con(adap, val) pca_outw(adap, I2C_PCA_CON, val)
 #define pca_get_con(adap) pca_inw(adap, I2C_PCA_CON)
 #define pca_wait(adap) adap->wait_for_completion(adap->data)
-#define pca_reset(adap) adap->reset_chip(adap->data)
 
-static void pca9665_reset(void *pd)
+static void pca_reset(struct i2c_algo_pca_data *adap)
 {
-	struct i2c_algo_pca_data *adap = pd;
-	pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
-	pca_outw(adap, I2C_PCA_IND, 0xA5);
-	pca_outw(adap, I2C_PCA_IND, 0x5A);
+	if (adap->chip == I2C_PCA_CHIP_9665) {
+		/* Ignore the reset function from the module,
+		 * we can use the parallel bus reset.
+		 */
+		pca_outw(adap, I2C_PCA_INDPTR, I2C_PCA_IPRESET);
+		pca_outw(adap, I2C_PCA_IND, 0xA5);
+		pca_outw(adap, I2C_PCA_IND, 0x5A);
+	} else {
+		adap->reset_chip(adap->data);
+	}
 }
 
 /*
@@ -378,11 +383,12 @@ static unsigned int pca_probe_chip(struct i2c_adapter *adap)
 	pca_outw(pca_data, I2C_PCA_INDPTR, I2C_PCA_IADR);
 	if (pca_inw(pca_data, I2C_PCA_IND) == 0xAA) {
 		printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name);
-		return I2C_PCA_CHIP_9665;
+		pca_data->chip = I2C_PCA_CHIP_9665;
 	} else {
 		printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name);
-		return I2C_PCA_CHIP_9564;
+		pca_data->chip = I2C_PCA_CHIP_9564;
 	}
+	return pca_data->chip;
 }
 
 static int pca_init(struct i2c_adapter *adap)
@@ -456,11 +462,6 @@ static int pca_init(struct i2c_adapter *adap)
 		 */
 		int raise_fall_time;
 
-		/* Ignore the reset function from the module,
-		 * we can use the parallel bus reset
-		 */
-		pca_data->reset_chip = pca9665_reset;
-
 		if (pca_data->i2c_clock > 1265800) {
 			printk(KERN_WARNING "%s: I2C clock speed too high."
 				" Using 1265.8kHz.\n", adap->name);
@@ -476,17 +477,17 @@ static int pca_init(struct i2c_adapter *adap)
 		/* To avoid integer overflow, use clock/100 for calculations */
 		clock = pca_clock(pca_data) / 100;
 
-		if (pca_data->i2c_clock > 10000) {
+		if (pca_data->i2c_clock > 1000000) {
 			mode = I2C_PCA_MODE_TURBO;
 			min_tlow = 14;
 			min_thi  = 5;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 4000) {
+		} else if (pca_data->i2c_clock > 400000) {
 			mode = I2C_PCA_MODE_FASTP;
 			min_tlow = 17;
 			min_thi  = 9;
 			raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
-		} else if (pca_data->i2c_clock > 1000) {
+		} else if (pca_data->i2c_clock > 100000) {
 			mode = I2C_PCA_MODE_FAST;
 			min_tlow = 44;
 			min_thi  = 20;