diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-26 13:44:19 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-04-26 13:44:19 -0700 |
commit | a52b0d25a722e84da999005b75f972aa4824253c (patch) | |
tree | 4a3a48305f744e6bde2e3fd663a4473dd712049c /drivers/ide/ide-iops.c | |
parent | 539a5fe22620a1665cce504167953a71a43232ad (diff) | |
parent | f37afdaca711838b50ecd89b9c15fc745270d77c (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (46 commits)
ide: constify struct ide_dma_ops
ide: add struct ide_dma_ops (take 3)
ide: add IDE_HFLAG_SERIALIZE_DMA host flag
sl82c105: check bridge revision in sl82c105_init_one()
au1xxx-ide: use ->init_dma method
palm_bk3710: use ->init_dma method
sgiioc4: use ->init_dma method
icside: use ->init_dma method
ide-pmac: use ->init_dma method
ide: do complete DMA setup in ->init_dma method (take 2)
au1xxx-ide: fix MWDMA support
ide: cleanup ide_setup_dma()
ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
ide: export ide_allocate_dma_engine()
ide: move ide_setup_dma() call out from ->init_dma method
alim15x3: skip DMA initialization completely on revs < 0x20
pdc202xx_old: remove init_dma_pdc202xx()
ide: don't display "BIOS" settings in ide_setup_dma()
ide: remove ->cds field from ide_hwif_t (take 2)
ide: remove ide_dma_iobase()
...
Diffstat (limited to 'drivers/ide/ide-iops.c')
-rw-r--r-- | drivers/ide/ide-iops.c | 38 |
1 files changed, 23 insertions, 15 deletions
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 45944219eea..9c646bd6354 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -159,17 +159,20 @@ EXPORT_SYMBOL(default_hwif_mmiops); void SELECT_DRIVE (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; + const struct ide_port_ops *port_ops = hwif->port_ops; - if (hwif->selectproc) - hwif->selectproc(drive); + if (port_ops && port_ops->selectproc) + port_ops->selectproc(drive); hwif->OUTB(drive->select.all, hwif->io_ports[IDE_SELECT_OFFSET]); } void SELECT_MASK (ide_drive_t *drive, int mask) { - if (HWIF(drive)->maskproc) - HWIF(drive)->maskproc(drive, mask); + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + + if (port_ops && port_ops->maskproc) + port_ops->maskproc(drive, mask); } /* @@ -429,7 +432,7 @@ int drive_is_ready (ide_drive_t *drive) u8 stat = 0; if (drive->waiting_for_dma) - return hwif->ide_dma_test_irq(drive); + return hwif->dma_ops->dma_test_irq(drive); #if 0 /* need to guarantee 400ns since last command was issued */ @@ -700,8 +703,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) // msleep(50); #ifdef CONFIG_BLK_DEV_IDEDMA - if (hwif->dma_host_set) /* check if host supports DMA */ - hwif->dma_host_set(drive, 0); + if (hwif->dma_ops) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 0); #endif /* Skip setting PIO flow-control modes on pre-EIDE drives */ @@ -759,8 +762,8 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) #ifdef CONFIG_BLK_DEV_IDEDMA if ((speed >= XFER_SW_DMA_0 || (hwif->host_flags & IDE_HFLAG_VDMA)) && drive->using_dma) - hwif->dma_host_set(drive, 1); - else if (hwif->dma_host_set) /* check if host supports DMA */ + hwif->dma_ops->dma_host_set(drive, 1); + else if (hwif->dma_ops) /* check if host supports DMA */ ide_dma_off_quietly(drive); #endif @@ -905,10 +908,11 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); ide_hwif_t *hwif = HWIF(drive); + const struct ide_port_ops *port_ops = hwif->port_ops; u8 tmp; - if (hwif->reset_poll != NULL) { - if (hwif->reset_poll(drive)) { + if (port_ops && port_ops->reset_poll) { + if (port_ops->reset_poll(drive)) { printk(KERN_ERR "%s: host reset_poll failure for %s.\n", hwif->name, drive->name); return ide_stopped; @@ -974,6 +978,8 @@ static void ide_disk_pre_reset(ide_drive_t *drive) static void pre_reset(ide_drive_t *drive) { + const struct ide_port_ops *port_ops = drive->hwif->port_ops; + if (drive->media == ide_disk) ide_disk_pre_reset(drive); else @@ -994,8 +1000,8 @@ static void pre_reset(ide_drive_t *drive) return; } - if (HWIF(drive)->pre_reset != NULL) - HWIF(drive)->pre_reset(drive); + if (port_ops && port_ops->pre_reset) + port_ops->pre_reset(drive); if (drive->current_speed != 0xff) drive->desired_speed = drive->current_speed; @@ -1023,6 +1029,7 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) unsigned long flags; ide_hwif_t *hwif; ide_hwgroup_t *hwgroup; + const struct ide_port_ops *port_ops; u8 ctl; spin_lock_irqsave(&ide_lock, flags); @@ -1089,8 +1096,9 @@ static ide_startstop_t do_reset1 (ide_drive_t *drive, int do_not_try_atapi) * state when the disks are reset this way. At least, the Winbond * 553 documentation says that */ - if (hwif->resetproc) - hwif->resetproc(drive); + port_ops = hwif->port_ops; + if (port_ops && port_ops->resetproc) + port_ops->resetproc(drive); spin_unlock_irqrestore(&ide_lock, flags); return ide_started; |