Merge tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging drivers patches from Greg KH:
 "Here's the big staging driver tree update for 3.20-rc1.

  Lots of little things in here, adding up to lots of overall cleanups.
  The IIO driver updates are also in here as they cross the staging tree
  boundry a lot.  I2O has moved into staging as well, as a plan to drop
  it from the tree eventually as that's a dead subsystem.

  All of this has been in linux-next with no reported issues for a
  while"

* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
  staging: lustre: lustre: libcfs: define symbols as static
  staging: rtl8712: Do coding style cleanup
  staging: lustre: make obd_updatemax_lock static
  staging: rtl8188eu: core: switch with redundant cases
  staging: rtl8188eu: odm: conditional setting with no effect
  staging: rtl8188eu: odm: condition with no effect
  staging: ft1000: fix braces warning
  staging: sm7xxfb: fix remaining CamelCase
  staging: sm7xxfb: fix CamelCase
  staging: rtl8723au: multiple condition with no effect - if identical to else
  staging: sm7xxfb: make smtc_scr_info static
  staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
  staging/lustre/clio: Do not allow group locks with gid 0
  staging/lustre/llite: don't add to page cache upon failure
  staging/lustre/llite: Add exception entry check after radix_tree
  staging/lustre/libcfs: protect kkuc_groups from write access
  staging/lustre/fld: refer to MDT0 for fld lookup in some cases
  staging/lustre/llite: Solve a race to access lli_has_smd in read case
  staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
  staging/lustre/lnet: portal spreading rotor should be unsigned
  ...

9 files changed, 906 insertions, 21 deletions

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 5bea821adca..ae68c64bdad 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -48,6 +48,17 @@ config CM32181
 	 To compile this driver as a module, choose M here:
 	 the module will be called cm32181.
 
+config CM3232
+	depends on I2C
+	tristate "CM3232 ambient light sensor"
+	help
+	 Say Y here if you use cm3232.
+	 This option enables ambient light sensor using
+	 Capella Microsystems cm3232 device driver.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called cm3232.
+
 config CM36651
 	depends on I2C
 	tristate "CM36651 driver"
@@ -95,6 +106,9 @@ config HID_SENSOR_ALS
 	  Say yes here to build support for the HID SENSOR
 	  Ambient light sensor.
 
+	  To compile this driver as a module, choose M here: the
+	  module will be called hid-sensor-als.
+
 config HID_SENSOR_PROX
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
@@ -109,6 +123,16 @@ config HID_SENSOR_PROX
 	  To compile this driver as a module, choose M here: the
 	  module will be called hid-sensor-prox.
 
+config JSA1212
+	tristate "JSA1212 ALS and proximity sensor driver"
+	depends on I2C
+	help
+	 Say Y here if you want to build a IIO driver for JSA1212
+	 proximity & ALS sensor device.
+
+	 To compile this driver as a module, choose M here:
+	 the module will be called jsa1212.
+
 config SENSORS_LM3533
 	tristate "LM3533 ambient light sensor"
 	depends on MFD_LM3533
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 47877a36cc1..b12a5160d9e 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -7,11 +7,13 @@ obj-$(CONFIG_ADJD_S311)		+= adjd_s311.o
 obj-$(CONFIG_AL3320A)		+= al3320a.o
 obj-$(CONFIG_APDS9300)		+= apds9300.o
 obj-$(CONFIG_CM32181)		+= cm32181.o
+obj-$(CONFIG_CM3232)		+= cm3232.o
 obj-$(CONFIG_CM36651)		+= cm36651.o
 obj-$(CONFIG_GP2AP020A00F)	+= gp2ap020a00f.o
 obj-$(CONFIG_HID_SENSOR_ALS)	+= hid-sensor-als.o
 obj-$(CONFIG_HID_SENSOR_PROX)	+= hid-sensor-prox.o
 obj-$(CONFIG_ISL29125)		+= isl29125.o
+obj-$(CONFIG_JSA1212)		+= jsa1212.o
 obj-$(CONFIG_SENSORS_LM3533)	+= lm3533-als.o
 obj-$(CONFIG_LTR501)		+= ltr501.o
 obj-$(CONFIG_SENSORS_TSL2563)	+= tsl2563.o
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index ad36b294e4d..5d12ae54d08 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -169,7 +169,7 @@ static int cm32181_write_als_it(struct cm32181_chip *cm32181, int val)
  * @cm32181:	pointer of struct cm32181.
  *
  * Convert sensor raw data to lux.  It depends on integration
- * time and claibscale variable.
+ * time and calibscale variable.
  *
  * Return: Positive value is lux, otherwise is error code.
  */
diff --git a/drivers/iio/light/cm3232.c b/drivers/iio/light/cm3232.c
new file mode 100644
index 00000000000..90e3519a91d
--- /dev/null
+++ b/drivers/iio/light/cm3232.c
@@ -0,0 +1,403 @@
+/*
+ * CM3232 Ambient Light Sensor
+ *
+ * Copyright (C) 2014-2015 Capella Microsystems Inc.
+ * Author: Kevin Tsai <ktsai@capellamicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2, as published
+ * by the Free Software Foundation.
+ *
+ * IIO driver for CM3232 (7-bit I2C slave address 0x10).
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/init.h>
+
+/* Registers Address */
+#define CM3232_REG_ADDR_CMD		0x00
+#define CM3232_REG_ADDR_ALS		0x50
+#define CM3232_REG_ADDR_ID		0x53
+
+#define CM3232_CMD_ALS_DISABLE		BIT(0)
+
+#define CM3232_CMD_ALS_IT_SHIFT		2
+#define CM3232_CMD_ALS_IT_MASK		(BIT(2) | BIT(3) | BIT(4))
+#define CM3232_CMD_ALS_IT_DEFAULT	(0x01 << CM3232_CMD_ALS_IT_SHIFT)
+
+#define CM3232_CMD_ALS_RESET		BIT(6)
+
+#define CM3232_CMD_DEFAULT		CM3232_CMD_ALS_IT_DEFAULT
+
+#define CM3232_HW_ID			0x32
+#define CM3232_CALIBSCALE_DEFAULT	100000
+#define CM3232_CALIBSCALE_RESOLUTION	100000
+#define CM3232_MLUX_PER_LUX		1000
+
+#define CM3232_MLUX_PER_BIT_DEFAULT	64
+#define CM3232_MLUX_PER_BIT_BASE_IT	100000
+
+static const struct {
+	int val;
+	int val2;
+	u8 it;
+} cm3232_als_it_scales[] = {
+	{0, 100000, 0},	/* 0.100000 */
+	{0, 200000, 1},	/* 0.200000 */
+	{0, 400000, 2},	/* 0.400000 */
+	{0, 800000, 3},	/* 0.800000 */
+	{1, 600000, 4},	/* 1.600000 */
+	{3, 200000, 5},	/* 3.200000 */
+};
+
+struct cm3232_als_info {
+	u8 regs_cmd_default;
+	u8 hw_id;
+	int calibscale;
+	int mlux_per_bit;
+	int mlux_per_bit_base_it;
+};
+
+static struct cm3232_als_info cm3232_als_info_default = {
+	.regs_cmd_default = CM3232_CMD_DEFAULT,
+	.hw_id = CM3232_HW_ID,
+	.calibscale = CM3232_CALIBSCALE_DEFAULT,
+	.mlux_per_bit = CM3232_MLUX_PER_BIT_DEFAULT,
+	.mlux_per_bit_base_it = CM3232_MLUX_PER_BIT_BASE_IT,
+};
+
+struct cm3232_chip {
+	struct i2c_client *client;
+	struct cm3232_als_info *als_info;
+	u8 regs_cmd;
+	u16 regs_als;
+};
+
+/**
+ * cm3232_reg_init() - Initialize CM3232
+ * @chip:	pointer of struct cm3232_chip.
+ *
+ * Check and initialize CM3232 ambient light sensor.
+ *
+ * Return: 0 for success; otherwise for error code.
+ */
+static int cm3232_reg_init(struct cm3232_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	s32 ret;
+
+	chip->als_info = &cm3232_als_info_default;
+
+	/* Identify device */
+	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ID);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "Error reading addr_id\n");
+		return ret;
+	}
+
+	if ((ret & 0xFF) != chip->als_info->hw_id)
+		return -ENODEV;
+
+	/* Disable and reset device */
+	chip->regs_cmd = CM3232_CMD_ALS_DISABLE | CM3232_CMD_ALS_RESET;
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd);
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
+		return ret;
+	}
+
+	/* Register default value */
+	chip->regs_cmd = chip->als_info->regs_cmd_default;
+
+	/* Configure register */
+	ret = i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+					chip->regs_cmd);
+	if (ret < 0)
+		dev_err(&chip->client->dev, "Error writing reg_cmd\n");
+
+	return 0;
+}
+
+/**
+ *  cm3232_read_als_it() - Get sensor integration time
+ *  @chip:	pointer of struct cm3232_chip
+ *  @val:	pointer of int to load the integration (sec).
+ *  @val2:	pointer of int to load the integration time (microsecond).
+ *
+ *  Report the current integration time.
+ *
+ *  Return: IIO_VAL_INT_PLUS_MICRO for success, otherwise -EINVAL.
+ */
+static int cm3232_read_als_it(struct cm3232_chip *chip, int *val, int *val2)
+{
+	u16 als_it;
+	int i;
+
+	als_it = chip->regs_cmd;
+	als_it &= CM3232_CMD_ALS_IT_MASK;
+	als_it >>= CM3232_CMD_ALS_IT_SHIFT;
+	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
+		if (als_it == cm3232_als_it_scales[i].it) {
+			*val = cm3232_als_it_scales[i].val;
+			*val2 = cm3232_als_it_scales[i].val2;
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * cm3232_write_als_it() - Write sensor integration time
+ * @chip:	pointer of struct cm3232_chip.
+ * @val:	integration time in second.
+ * @val2:	integration time in microsecond.
+ *
+ * Convert integration time to sensor value.
+ *
+ * Return: i2c_smbus_write_byte_data command return value.
+ */
+static int cm3232_write_als_it(struct cm3232_chip *chip, int val, int val2)
+{
+	struct i2c_client *client = chip->client;
+	u16 als_it, cmd;
+	int i;
+	s32 ret;
+
+	for (i = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++) {
+		if (val == cm3232_als_it_scales[i].val &&
+			val2 == cm3232_als_it_scales[i].val2) {
+
+			als_it = cm3232_als_it_scales[i].it;
+			als_it <<= CM3232_CMD_ALS_IT_SHIFT;
+
+			cmd = chip->regs_cmd & ~CM3232_CMD_ALS_IT_MASK;
+			cmd |= als_it;
+			ret = i2c_smbus_write_byte_data(client,
+							CM3232_REG_ADDR_CMD,
+							cmd);
+			if (ret < 0)
+				return ret;
+			chip->regs_cmd = cmd;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
+/**
+ * cm3232_get_lux() - report current lux value
+ * @chip:	pointer of struct cm3232_chip.
+ *
+ * Convert sensor data to lux.  It depends on integration
+ * time and calibscale variable.
+ *
+ * Return: Zero or positive value is lux, otherwise error code.
+ */
+static int cm3232_get_lux(struct cm3232_chip *chip)
+{
+	struct i2c_client *client = chip->client;
+	struct cm3232_als_info *als_info = chip->als_info;
+	int ret;
+	int val, val2;
+	int als_it;
+	u64 lux;
+
+	/* Calculate mlux per bit based on als_it */
+	ret = cm3232_read_als_it(chip, &val, &val2);
+	if (ret < 0)
+		return -EINVAL;
+	als_it = val * 1000000 + val2;
+	lux = (__force u64)als_info->mlux_per_bit;
+	lux *= als_info->mlux_per_bit_base_it;
+	lux = div_u64(lux, als_it);
+
+	ret = i2c_smbus_read_word_data(client, CM3232_REG_ADDR_ALS);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading reg_addr_als\n");
+		return ret;
+	}
+
+	chip->regs_als = (u16)ret;
+	lux *= chip->regs_als;
+	lux *= als_info->calibscale;
+	lux = div_u64(lux, CM3232_CALIBSCALE_RESOLUTION);
+	lux = div_u64(lux, CM3232_MLUX_PER_LUX);
+
+	if (lux > 0xFFFF)
+		lux = 0xFFFF;
+
+	return (int)lux;
+}
+
+static int cm3232_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct cm3232_als_info *als_info = chip->als_info;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = cm3232_get_lux(chip);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		*val = als_info->calibscale;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_INT_TIME:
+		return cm3232_read_als_it(chip, val, val2);
+	}
+
+	return -EINVAL;
+}
+
+static int cm3232_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int val, int val2, long mask)
+{
+	struct cm3232_chip *chip = iio_priv(indio_dev);
+	struct cm3232_als_info *als_info = chip->als_info;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBSCALE:
+		als_info->calibscale = val;
+		return 0;
+	case IIO_CHAN_INFO_INT_TIME:
+		return cm3232_write_als_it(chip, val, val2);
+	}
+
+	return -EINVAL;
+}
+
+/**
+ * cm3232_get_it_available() - Get available ALS IT value
+ * @dev:	pointer of struct device.
+ * @attr:	pointer of struct device_attribute.
+ * @buf:	pointer of return string buffer.
+ *
+ * Display the available integration time in second.
+ *
+ * Return: string length.
+ */
+static ssize_t cm3232_get_it_available(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	int i, len;
+
+	for (i = 0, len = 0; i < ARRAY_SIZE(cm3232_als_it_scales); i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ",
+			cm3232_als_it_scales[i].val,
+			cm3232_als_it_scales[i].val2);
+	return len + scnprintf(buf + len, PAGE_SIZE - len, "\n");
+}
+
+static const struct iio_chan_spec cm3232_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_CALIBSCALE) |
+			BIT(IIO_CHAN_INFO_INT_TIME),
+	}
+};
+
+static IIO_DEVICE_ATTR(in_illuminance_integration_time_available,
+			S_IRUGO, cm3232_get_it_available, NULL, 0);
+
+static struct attribute *cm3232_attributes[] = {
+	&iio_dev_attr_in_illuminance_integration_time_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group cm3232_attribute_group = {
+	.attrs = cm3232_attributes
+};
+
+static const struct iio_info cm3232_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &cm3232_read_raw,
+	.write_raw		= &cm3232_write_raw,
+	.attrs			= &cm3232_attribute_group,
+};
+
+static int cm3232_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct cm3232_chip *chip;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	chip = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	chip->client = client;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = cm3232_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cm3232_channels);
+	indio_dev->info = &cm3232_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = cm3232_reg_init(chip);
+	if (ret) {
+		dev_err(&client->dev,
+			"%s: register init failed\n",
+			__func__);
+		return ret;
+	}
+
+	return iio_device_register(indio_dev);
+}
+
+static int cm3232_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	i2c_smbus_write_byte_data(client, CM3232_REG_ADDR_CMD,
+		CM3232_CMD_ALS_DISABLE);
+
+	iio_device_unregister(indio_dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id cm3232_id[] = {
+	{"cm3232", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, cm3232_id);
+
+static const struct of_device_id cm3232_of_match[] = {
+	{.compatible = "capella,cm3232"},
+	{}
+};
+
+static struct i2c_driver cm3232_driver = {
+	.driver = {
+		.name	= "cm3232",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(cm3232_of_match),
+	},
+	.id_table	= cm3232_id,
+	.probe		= cm3232_probe,
+	.remove		= cm3232_remove,
+};
+
+module_i2c_driver(cm3232_driver);
+
+MODULE_AUTHOR("Kevin Tsai <ktsai@capellamicro.com>");
+MODULE_DESCRIPTION("CM3232 ambient light sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c
index a5283d75c09..948acfc38b8 100644
--- a/drivers/iio/light/hid-sensor-als.c
+++ b/drivers/iio/light/hid-sensor-als.c
@@ -80,7 +80,6 @@ static int als_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
-	s32 poll_value;
 
 	*val = 0;
 	*val2 = 0;
@@ -97,15 +96,8 @@ static int als_read_raw(struct iio_dev *indio_dev,
 			break;
 		}
 		if (report_id >= 0) {
-			poll_value = hid_sensor_read_poll_value(
-						&als_state->common_attributes);
-			if (poll_value < 0)
-				return -EINVAL;
-
 			hid_sensor_power_state(&als_state->common_attributes,
 						true);
-			msleep_interruptible(poll_value * 2);
-
 			*val = sensor_hub_input_attr_get_raw_value(
 					als_state->common_attributes.hsdev,
 					HID_USAGE_SENSOR_ALS, address,
@@ -381,6 +373,7 @@ static struct platform_driver hid_als_platform_driver = {
 	.id_table = hid_als_ids,
 	.driver = {
 		.name	= KBUILD_MODNAME,
+		.pm	= &hid_sensor_pm_ops,
 	},
 	.probe		= hid_als_probe,
 	.remove		= hid_als_remove,
diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c
index f5a514698fd..3ecf79ed08a 100644
--- a/drivers/iio/light/hid-sensor-prox.c
+++ b/drivers/iio/light/hid-sensor-prox.c
@@ -75,7 +75,6 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 	int report_id = -1;
 	u32 address;
 	int ret_type;
-	s32 poll_value;
 
 	*val = 0;
 	*val2 = 0;
@@ -92,16 +91,8 @@ static int prox_read_raw(struct iio_dev *indio_dev,
 			break;
 		}
 		if (report_id >= 0) {
-			poll_value = hid_sensor_read_poll_value(
-					&prox_state->common_attributes);
-			if (poll_value < 0)
-				return -EINVAL;
-
 			hid_sensor_power_state(&prox_state->common_attributes,
 						true);
-
-			msleep_interruptible(poll_value * 2);
-
 			*val = sensor_hub_input_attr_get_raw_value(
 				prox_state->common_attributes.hsdev,
 				HID_USAGE_SENSOR_PROX, address,
@@ -373,6 +364,7 @@ static struct platform_driver hid_prox_platform_driver = {
 	.id_table = hid_prox_ids,
 	.driver = {
 		.name	= KBUILD_MODNAME,
+		.pm	= &hid_sensor_pm_ops,
 	},
 	.probe		= hid_prox_probe,
 	.remove		= hid_prox_remove,
diff --git a/drivers/iio/light/jsa1212.c b/drivers/iio/light/jsa1212.c
new file mode 100644
index 00000000000..29de7e7d956
--- /dev/null
+++ b/drivers/iio/light/jsa1212.c
@@ -0,0 +1,471 @@
+/*
+ * JSA1212 Ambient Light & Proximity Sensor Driver
+ *
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * JSA1212 I2C slave address: 0x44(ADDR tied to GND), 0x45(ADDR tied to VDD)
+ *
+ * TODO: Interrupt support, thresholds, range support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+/* JSA1212 reg address */
+#define JSA1212_CONF_REG		0x01
+#define JSA1212_INT_REG			0x02
+#define JSA1212_PXS_LT_REG		0x03
+#define JSA1212_PXS_HT_REG		0x04
+#define JSA1212_ALS_TH1_REG		0x05
+#define JSA1212_ALS_TH2_REG		0x06
+#define JSA1212_ALS_TH3_REG		0x07
+#define JSA1212_PXS_DATA_REG		0x08
+#define JSA1212_ALS_DT1_REG		0x09
+#define JSA1212_ALS_DT2_REG		0x0A
+#define JSA1212_ALS_RNG_REG		0x0B
+#define JSA1212_MAX_REG			0x0C
+
+/* JSA1212 reg masks */
+#define JSA1212_CONF_MASK		0xFF
+#define JSA1212_INT_MASK		0xFF
+#define JSA1212_PXS_LT_MASK		0xFF
+#define JSA1212_PXS_HT_MASK		0xFF
+#define JSA1212_ALS_TH1_MASK		0xFF
+#define JSA1212_ALS_TH2_LT_MASK		0x0F
+#define JSA1212_ALS_TH2_HT_MASK		0xF0
+#define JSA1212_ALS_TH3_MASK		0xFF
+#define JSA1212_PXS_DATA_MASK		0xFF
+#define JSA1212_ALS_DATA_MASK		0x0FFF
+#define JSA1212_ALS_DT1_MASK		0xFF
+#define JSA1212_ALS_DT2_MASK		0x0F
+#define JSA1212_ALS_RNG_MASK		0x07
+
+/* JSA1212 CONF REG bits */
+#define JSA1212_CONF_PXS_MASK		0x80
+#define JSA1212_CONF_PXS_ENABLE		0x80
+#define JSA1212_CONF_PXS_DISABLE	0x00
+#define JSA1212_CONF_ALS_MASK		0x04
+#define JSA1212_CONF_ALS_ENABLE		0x04
+#define JSA1212_CONF_ALS_DISABLE	0x00
+#define JSA1212_CONF_IRDR_MASK		0x08
+/* Proxmity sensing IRDR current sink settings */
+#define JSA1212_CONF_IRDR_200MA		0x08
+#define JSA1212_CONF_IRDR_100MA		0x00
+#define JSA1212_CONF_PXS_SLP_MASK	0x70
+#define JSA1212_CONF_PXS_SLP_0MS	0x70
+#define JSA1212_CONF_PXS_SLP_12MS	0x60
+#define JSA1212_CONF_PXS_SLP_50MS	0x50
+#define JSA1212_CONF_PXS_SLP_75MS	0x40
+#define JSA1212_CONF_PXS_SLP_100MS	0x30
+#define JSA1212_CONF_PXS_SLP_200MS	0x20
+#define JSA1212_CONF_PXS_SLP_400MS	0x10
+#define JSA1212_CONF_PXS_SLP_800MS	0x00
+
+/* JSA1212 INT REG bits */
+#define JSA1212_INT_CTRL_MASK		0x01
+#define JSA1212_INT_CTRL_EITHER		0x00
+#define JSA1212_INT_CTRL_BOTH		0x01
+#define JSA1212_INT_ALS_PRST_MASK	0x06
+#define JSA1212_INT_ALS_PRST_1CONV	0x00
+#define JSA1212_INT_ALS_PRST_4CONV	0x02
+#define JSA1212_INT_ALS_PRST_8CONV	0x04
+#define JSA1212_INT_ALS_PRST_16CONV	0x06
+#define JSA1212_INT_ALS_FLAG_MASK	0x08
+#define JSA1212_INT_ALS_FLAG_CLR	0x00
+#define JSA1212_INT_PXS_PRST_MASK	0x60
+#define JSA1212_INT_PXS_PRST_1CONV	0x00
+#define JSA1212_INT_PXS_PRST_4CONV	0x20
+#define JSA1212_INT_PXS_PRST_8CONV	0x40
+#define JSA1212_INT_PXS_PRST_16CONV	0x60
+#define JSA1212_INT_PXS_FLAG_MASK	0x80
+#define JSA1212_INT_PXS_FLAG_CLR	0x00
+
+/* JSA1212 ALS RNG REG bits */
+#define JSA1212_ALS_RNG_0_2048		0x00
+#define JSA1212_ALS_RNG_0_1024		0x01
+#define JSA1212_ALS_RNG_0_512		0x02
+#define JSA1212_ALS_RNG_0_256		0x03
+#define JSA1212_ALS_RNG_0_128		0x04
+
+/* JSA1212 INT threshold range */
+#define JSA1212_ALS_TH_MIN	0x0000
+#define JSA1212_ALS_TH_MAX	0x0FFF
+#define JSA1212_PXS_TH_MIN	0x00
+#define JSA1212_PXS_TH_MAX	0xFF
+
+#define JSA1212_ALS_DELAY_MS	200
+#define JSA1212_PXS_DELAY_MS	100
+
+#define JSA1212_DRIVER_NAME	"jsa1212"
+#define JSA1212_REGMAP_NAME	"jsa1212_regmap"
+
+enum jsa1212_op_mode {
+	JSA1212_OPMODE_ALS_EN,
+	JSA1212_OPMODE_PXS_EN,
+};
+
+struct jsa1212_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	u8 als_rng_idx;
+	bool als_en; /* ALS enable status */
+	bool pxs_en; /* proximity enable status */
+	struct regmap *regmap;
+};
+
+/* ALS range idx to val mapping */
+static const int jsa1212_als_range_val[] = {2048, 1024, 512, 256, 128,
+						128, 128, 128};
+
+/* Enables or disables ALS function based on status */
+static int jsa1212_als_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->als_en = !!status;
+
+	return 0;
+}
+
+/* Enables or disables PXS function based on status */
+static int jsa1212_pxs_enable(struct jsa1212_data *data, u8 status)
+{
+	int ret;
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_PXS_MASK,
+				status);
+	if (ret < 0)
+		return ret;
+
+	data->pxs_en = !!status;
+
+	return 0;
+}
+
+static int jsa1212_read_als_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	__le16 als_data;
+
+	ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_ALS_DELAY_MS);
+
+	/* Read 12 bit data */
+	ret = regmap_bulk_read(data->regmap, JSA1212_ALS_DT1_REG, &als_data, 2);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "als data read err\n");
+		goto als_data_read_err;
+	}
+
+	*val = le16_to_cpu(als_data);
+
+als_data_read_err:
+	return jsa1212_als_enable(data, JSA1212_CONF_ALS_DISABLE);
+}
+
+static int jsa1212_read_pxs_data(struct jsa1212_data *data,
+				unsigned int *val)
+{
+	int ret;
+	unsigned int pxs_data;
+
+	ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+	if (ret < 0)
+		return ret;
+
+	/* Delay for data output */
+	msleep(JSA1212_PXS_DELAY_MS);
+
+	/* Read out all data */
+	ret = regmap_read(data->regmap, JSA1212_PXS_DATA_REG, &pxs_data);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "pxs data read err\n");
+		goto pxs_data_read_err;
+	}
+
+	*val = pxs_data & JSA1212_PXS_DATA_MASK;
+
+pxs_data_read_err:
+	return jsa1212_pxs_enable(data, JSA1212_CONF_PXS_DISABLE);
+}
+
+static int jsa1212_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int *val, int *val2, long mask)
+{
+	int ret;
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		switch (chan->type) {
+		case IIO_LIGHT:
+			ret = jsa1212_read_als_data(data, val);
+			break;
+		case IIO_PROXIMITY:
+			ret = jsa1212_read_pxs_data(data, val);
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->lock);
+		return ret < 0 ? ret : IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_LIGHT:
+			*val = jsa1212_als_range_val[data->als_rng_idx];
+			*val2 = BIT(12); /* Max 12 bit value */
+			return IIO_VAL_FRACTIONAL;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec jsa1212_channels[] = {
+	{
+		.type = IIO_LIGHT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+	}
+};
+
+static const struct iio_info jsa1212_info = {
+	.driver_module		= THIS_MODULE,
+	.read_raw		= &jsa1212_read_raw,
+};
+
+static int jsa1212_chip_init(struct jsa1212_data *data)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, JSA1212_CONF_REG,
+				(JSA1212_CONF_PXS_SLP_50MS |
+				JSA1212_CONF_IRDR_200MA));
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, JSA1212_INT_REG,
+				JSA1212_INT_ALS_PRST_4CONV);
+	if (ret < 0)
+		return ret;
+
+	data->als_rng_idx = JSA1212_ALS_RNG_0_2048;
+
+	return 0;
+}
+
+static bool jsa1212_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case JSA1212_PXS_DATA_REG:
+	case JSA1212_ALS_DT1_REG:
+	case JSA1212_ALS_DT2_REG:
+	case JSA1212_INT_REG:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static struct regmap_config jsa1212_regmap_config = {
+	.name =  JSA1212_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = JSA1212_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+	.volatile_reg = jsa1212_is_volatile_reg,
+};
+
+static int jsa1212_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct jsa1212_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	regmap = devm_regmap_init_i2c(client, &jsa1212_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Regmap initialization failed.\n");
+		return PTR_ERR(regmap);
+	}
+
+	data = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->regmap = regmap;
+
+	mutex_init(&data->lock);
+
+	ret = jsa1212_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->channels = jsa1212_channels;
+	indio_dev->num_channels = ARRAY_SIZE(jsa1212_channels);
+	indio_dev->name = JSA1212_DRIVER_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->info = &jsa1212_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		dev_err(&client->dev, "%s: register device failed\n", __func__);
+
+	return ret;
+}
+
+ /* power off the device */
+static int jsa1212_power_off(struct jsa1212_data *data)
+{
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	ret = regmap_update_bits(data->regmap, JSA1212_CONF_REG,
+				JSA1212_CONF_ALS_MASK |
+				JSA1212_CONF_PXS_MASK,
+				JSA1212_CONF_ALS_DISABLE |
+				JSA1212_CONF_PXS_DISABLE);
+
+	if (ret < 0)
+		dev_err(&data->client->dev, "power off cmd failed\n");
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int jsa1212_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct jsa1212_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	return jsa1212_power_off(data);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int jsa1212_suspend(struct device *dev)
+{
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return jsa1212_power_off(data);
+}
+
+static int jsa1212_resume(struct device *dev)
+{
+	int ret = 0;
+	struct jsa1212_data *data;
+
+	data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	mutex_lock(&data->lock);
+
+	if (data->als_en) {
+		ret = jsa1212_als_enable(data, JSA1212_CONF_ALS_ENABLE);
+		if (ret < 0) {
+			dev_err(dev, "als resume failed\n");
+			goto unlock_and_ret;
+		}
+	}
+
+	if (data->pxs_en) {
+		ret = jsa1212_pxs_enable(data, JSA1212_CONF_PXS_ENABLE);
+		if (ret < 0)
+			dev_err(dev, "pxs resume failed\n");
+	}
+
+unlock_and_ret:
+	mutex_unlock(&data->lock);
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(jsa1212_pm_ops, jsa1212_suspend, jsa1212_resume);
+
+#define JSA1212_PM_OPS (&jsa1212_pm_ops)
+#else
+#define JSA1212_PM_OPS NULL
+#endif
+
+static const struct acpi_device_id jsa1212_acpi_match[] = {
+	{"JSA1212", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, jsa1212_acpi_match);
+
+static const struct i2c_device_id jsa1212_id[] = {
+	{ JSA1212_DRIVER_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, jsa1212_id);
+
+static struct i2c_driver jsa1212_driver = {
+	.driver = {
+		.name	= JSA1212_DRIVER_NAME,
+		.pm	= JSA1212_PM_OPS,
+		.owner	= THIS_MODULE,
+		.acpi_match_table = ACPI_PTR(jsa1212_acpi_match),
+	},
+	.probe		= jsa1212_probe,
+	.remove		= jsa1212_remove,
+	.id_table	= jsa1212_id,
+};
+module_i2c_driver(jsa1212_driver);
+
+MODULE_AUTHOR("Sathya Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com>");
+MODULE_DESCRIPTION("JSA1212 proximity/ambient light sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/light/lm3533-als.c b/drivers/iio/light/lm3533-als.c
index ae3c71bdd6c..076bc46fad0 100644
--- a/drivers/iio/light/lm3533-als.c
+++ b/drivers/iio/light/lm3533-als.c
@@ -657,7 +657,7 @@ static ALS_HYSTERESIS_ATTR_RO(3);
 #define ILLUMINANCE_ATTR_RO(_name) \
 	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO, show_##_name, NULL)
 #define ILLUMINANCE_ATTR_RW(_name) \
-	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR , \
+	DEVICE_ATTR(in_illuminance0_##_name, S_IRUGO | S_IWUSR, \
 						show_##_name, store_##_name)
 /*
  * ALS Zone threshold-event enable
diff --git a/drivers/iio/light/tcs3414.c b/drivers/iio/light/tcs3414.c
index a9e449b0be0..71c2bde275a 100644
--- a/drivers/iio/light/tcs3414.c
+++ b/drivers/iio/light/tcs3414.c
@@ -149,8 +149,8 @@ static int tcs3414_read_raw(struct iio_dev *indio_dev,
 		*val = ret;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-	i = (data->gain & TCS3414_GAIN_MASK) >> TCS3414_GAIN_SHIFT;
-	*val = tcs3414_scales[i][0];
+		i = (data->gain & TCS3414_GAIN_MASK) >> TCS3414_GAIN_SHIFT;
+		*val = tcs3414_scales[i][0];
 		*val2 = tcs3414_scales[i][1];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_INT_TIME: