Merge branch 'linus' into release

Conflicts:
	drivers/acpi/debug.c

Signed-off-by: Len Brown <len.brown@intel.com>

10 files changed, 1627 insertions, 56 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 1ba25145b33..9cc488d2149 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -297,6 +297,18 @@ config KEYBOARD_MAX7359
 	  To compile this driver as a module, choose M here: the
 	  module will be called max7359_keypad.
 
+config KEYBOARD_MCS
+	tristate "MELFAS MCS Touchkey"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS5000/5080 touchkey controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs_touchkey.
+
 config KEYBOARD_IMX
 	tristate "IMX keypad support"
 	depends on ARCH_MXC
@@ -342,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY
 	  To compile this driver as a module, choose M here: the
 	  module will be called pxa930_rotary.
 
+config KEYBOARD_SAMSUNG
+	tristate "Samsung keypad support"
+	depends on SAMSUNG_DEV_KEYPAD
+	help
+	  Say Y here if you want to use the Samsung keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called samsung-keypad.
+
 config KEYBOARD_STOWAWAY
 	tristate "Stowaway keyboard"
 	select SERIO
@@ -374,6 +395,16 @@ config KEYBOARD_SH_KEYSC
 	  To compile this driver as a module, choose M here: the
 	  module will be called sh_keysc.
 
+config KEYBOARD_STMPE
+	tristate "STMPE keypad support"
+	depends on MFD_STMPE
+	help
+	  Say Y here if you want to use the keypad controller on STMPE I/O
+	  expanders.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called stmpe-keypad.
+
 config KEYBOARD_DAVINCI
 	tristate "TI DaVinci Key Scan"
 	depends on ARCH_DAVINCI_DM365
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 4596d0c6f92..504b591be0c 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -26,13 +26,16 @@ obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
 obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
+obj-$(CONFIG_KEYBOARD_MCS)		+= mcs_touchkey.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
 obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
 obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
+obj-$(CONFIG_KEYBOARD_SAMSUNG)		+= samsung-keypad.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
+obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 744600eff22..d6918cb966c 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -19,6 +19,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
 #include <linux/slab.h>
 
 #include <linux/i2c/adp5588.h>
@@ -54,6 +55,10 @@
 
 #define KEYP_MAX_EVENT		10
 
+#define MAXGPIO			18
+#define ADP_BANK(offs)		((offs) >> 3)
+#define ADP_BIT(offs)		(1u << ((offs) & 0x7))
+
 /*
  * Early pre 4.0 Silicon required to delay readout by at least 25ms,
  * since the Event Counter Register updated 25ms after the interrupt
@@ -67,6 +72,16 @@ struct adp5588_kpad {
 	struct delayed_work work;
 	unsigned long delay;
 	unsigned short keycode[ADP5588_KEYMAPSIZE];
+	const struct adp5588_gpi_map *gpimap;
+	unsigned short gpimapsize;
+#ifdef CONFIG_GPIOLIB
+	unsigned char gpiomap[MAXGPIO];
+	bool export_gpio;
+	struct gpio_chip gc;
+	struct mutex gpio_lock;	/* Protect cached dir, dat_out */
+	u8 dat_out[3];
+	u8 dir[3];
+#endif
 };
 
 static int adp5588_read(struct i2c_client *client, u8 reg)
@@ -84,12 +99,222 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
 	return i2c_smbus_write_byte_data(client, reg, val);
 }
 
+#ifdef CONFIG_GPIOLIB
+static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit);
+}
+
+static void adp5588_gpio_set_value(struct gpio_chip *chip,
+				   unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+
+	mutex_lock(&kpad->gpio_lock);
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+			   kpad->dat_out[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+}
+
+static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] &= ~bit;
+	ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int adp5588_gpio_direction_output(struct gpio_chip *chip,
+					 unsigned off, int val)
+{
+	struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc);
+	unsigned int bank = ADP_BANK(kpad->gpiomap[off]);
+	unsigned int bit = ADP_BIT(kpad->gpiomap[off]);
+	int ret;
+
+	mutex_lock(&kpad->gpio_lock);
+
+	kpad->dir[bank] |= bit;
+
+	if (val)
+		kpad->dat_out[bank] |= bit;
+	else
+		kpad->dat_out[bank] &= ~bit;
+
+	ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank,
+				 kpad->dat_out[bank]);
+	ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank,
+				 kpad->dir[bank]);
+
+	mutex_unlock(&kpad->gpio_lock);
+
+	return ret;
+}
+
+static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad,
+				const struct adp5588_kpad_platform_data *pdata)
+{
+	bool pin_used[MAXGPIO];
+	int n_unused = 0;
+	int i;
+
+	memset(pin_used, 0, sizeof(pin_used));
+
+	for (i = 0; i < pdata->rows; i++)
+		pin_used[i] = true;
+
+	for (i = 0; i < pdata->cols; i++)
+		pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < kpad->gpimapsize; i++)
+		pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true;
+
+	for (i = 0; i < MAXGPIO; i++)
+		if (!pin_used[i])
+			kpad->gpiomap[n_unused++] = i;
+
+	return n_unused;
+}
+
+static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int i, error;
+
+	if (!gpio_data)
+		return 0;
+
+	kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata);
+	if (kpad->gc.ngpio == 0) {
+		dev_info(dev, "No unused gpios left to export\n");
+		return 0;
+	}
+
+	kpad->export_gpio = true;
+
+	kpad->gc.direction_input = adp5588_gpio_direction_input;
+	kpad->gc.direction_output = adp5588_gpio_direction_output;
+	kpad->gc.get = adp5588_gpio_get_value;
+	kpad->gc.set = adp5588_gpio_set_value;
+	kpad->gc.can_sleep = 1;
+
+	kpad->gc.base = gpio_data->gpio_start;
+	kpad->gc.label = kpad->client->name;
+	kpad->gc.owner = THIS_MODULE;
+
+	mutex_init(&kpad->gpio_lock);
+
+	error = gpiochip_add(&kpad->gc);
+	if (error) {
+		dev_err(dev, "gpiochip_add failed, err: %d\n", error);
+		return error;
+	}
+
+	for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+		kpad->dat_out[i] = adp5588_read(kpad->client,
+						GPIO_DAT_OUT1 + i);
+		kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i);
+	}
+
+	if (gpio_data->setup) {
+		error = gpio_data->setup(kpad->client,
+					 kpad->gc.base, kpad->gc.ngpio,
+					 gpio_data->context);
+		if (error)
+			dev_warn(dev, "setup failed, %d\n", error);
+	}
+
+	return 0;
+}
+
+static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+	struct device *dev = &kpad->client->dev;
+	const struct adp5588_kpad_platform_data *pdata = dev->platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
+	int error;
+
+	if (!kpad->export_gpio)
+		return;
+
+	if (gpio_data->teardown) {
+		error = gpio_data->teardown(kpad->client,
+					    kpad->gc.base, kpad->gc.ngpio,
+					    gpio_data->context);
+		if (error)
+			dev_warn(dev, "teardown failed %d\n", error);
+	}
+
+	error = gpiochip_remove(&kpad->gc);
+	if (error)
+		dev_warn(dev, "gpiochip_remove failed %d\n", error);
+}
+#else
+static inline int adp5588_gpio_add(struct adp5588_kpad *kpad)
+{
+	return 0;
+}
+
+static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad)
+{
+}
+#endif
+
+static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt)
+{
+	int i, j;
+
+	for (i = 0; i < ev_cnt; i++) {
+		int key = adp5588_read(kpad->client, Key_EVENTA + i);
+		int key_val = key & KEY_EV_MASK;
+
+		if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) {
+			for (j = 0; j < kpad->gpimapsize; j++) {
+				if (key_val == kpad->gpimap[j].pin) {
+					input_report_switch(kpad->input,
+							kpad->gpimap[j].sw_evt,
+							key & KEY_EV_PRESSED);
+					break;
+				}
+			}
+		} else {
+			input_report_key(kpad->input,
+					 kpad->keycode[key_val - 1],
+					 key & KEY_EV_PRESSED);
+		}
+	}
+}
+
 static void adp5588_work(struct work_struct *work)
 {
 	struct adp5588_kpad *kpad = container_of(work,
 						struct adp5588_kpad, work.work);
 	struct i2c_client *client = kpad->client;
-	int i, key, status, ev_cnt;
+	int status, ev_cnt;
 
 	status = adp5588_read(client, INT_STAT);
 
@@ -99,12 +324,7 @@ static void adp5588_work(struct work_struct *work)
 	if (status & KE_INT) {
 		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
 		if (ev_cnt) {
-			for (i = 0; i < ev_cnt; i++) {
-				key = adp5588_read(client, Key_EVENTA + i);
-				input_report_key(kpad->input,
-					kpad->keycode[(key & KEY_EV_MASK) - 1],
-					key & KEY_EV_PRESSED);
-			}
+			adp5588_report_events(kpad, ev_cnt);
 			input_sync(kpad->input);
 		}
 	}
@@ -128,8 +348,10 @@ static irqreturn_t adp5588_irq(int irq, void *handle)
 
 static int __devinit adp5588_setup(struct i2c_client *client)
 {
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data;
 	int i, ret;
+	unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0;
 
 	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
 	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
@@ -144,6 +366,32 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	for (i = 0; i < KEYP_MAX_EVENT; i++)
 		ret |= adp5588_read(client, Key_EVENTA);
 
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE));
+		} else {
+			evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF);
+			evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8);
+		}
+	}
+
+	if (pdata->gpimapsize) {
+		ret |= adp5588_write(client, GPI_EM1, evt_mode1);
+		ret |= adp5588_write(client, GPI_EM2, evt_mode2);
+		ret |= adp5588_write(client, GPI_EM3, evt_mode3);
+	}
+
+	if (gpio_data) {
+		for (i = 0; i <= ADP_BANK(MAXGPIO); i++) {
+			int pull_mask = gpio_data->pullup_dis_mask;
+
+			ret |= adp5588_write(client, GPIO_PULL1 + i,
+				(pull_mask >> (8 * i)) & 0xFF);
+		}
+	}
+
 	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
 					OVR_FLOW_INT | K_LCK_INT |
 					GPI_INT | KE_INT); /* Status is W1C */
@@ -158,11 +406,49 @@ static int __devinit adp5588_setup(struct i2c_client *client)
 	return 0;
 }
 
+static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad)
+{
+	int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1);
+	int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2);
+	int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3);
+	int gpi_stat_tmp, pin_loc;
+	int i;
+
+	for (i = 0; i < kpad->gpimapsize; i++) {
+		unsigned short pin = kpad->gpimap[i].pin;
+
+		if (pin <= GPI_PIN_ROW_END) {
+			gpi_stat_tmp = gpi_stat1;
+			pin_loc = pin - GPI_PIN_ROW_BASE;
+		} else if ((pin - GPI_PIN_COL_BASE) < 8) {
+			gpi_stat_tmp = gpi_stat2;
+			pin_loc = pin - GPI_PIN_COL_BASE;
+		} else {
+			gpi_stat_tmp = gpi_stat3;
+			pin_loc = pin - GPI_PIN_COL_BASE - 8;
+		}
+
+		if (gpi_stat_tmp < 0) {
+			dev_err(&kpad->client->dev,
+				"Can't read GPIO_DAT_STAT switch %d default to OFF\n",
+				pin);
+			gpi_stat_tmp = 0;
+		}
+
+		input_report_switch(kpad->input,
+				    kpad->gpimap[i].sw_evt,
+				    !(gpi_stat_tmp & (1 << pin_loc)));
+	}
+
+	input_sync(kpad->input);
+}
+
+
 static int __devinit adp5588_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
 {
 	struct adp5588_kpad *kpad;
-	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *input;
 	unsigned int revid;
 	int ret, i;
@@ -189,6 +475,37 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		return -EINVAL;
 	}
 
+	if (!pdata->gpimap && pdata->gpimapsize) {
+		dev_err(&client->dev, "invalid gpimap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) {
+		dev_err(&client->dev, "invalid gpimapsize\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < pdata->gpimapsize; i++) {
+		unsigned short pin = pdata->gpimap[i].pin;
+
+		if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) {
+			dev_err(&client->dev, "invalid gpi pin data\n");
+			return -EINVAL;
+		}
+
+		if (pin <= GPI_PIN_ROW_END) {
+			if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) {
+				dev_err(&client->dev, "invalid gpi row data\n");
+				return -EINVAL;
+			}
+		} else {
+			if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) {
+				dev_err(&client->dev, "invalid gpi col data\n");
+				return -EINVAL;
+			}
+		}
+	}
+
 	if (!client->irq) {
 		dev_err(&client->dev, "no IRQ?\n");
 		return -EINVAL;
@@ -233,6 +550,9 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	memcpy(kpad->keycode, pdata->keymap,
 		pdata->keymapsize * input->keycodesize);
 
+	kpad->gpimap = pdata->gpimap;
+	kpad->gpimapsize = pdata->gpimapsize;
+
 	/* setup input device */
 	__set_bit(EV_KEY, input->evbit);
 
@@ -243,6 +563,11 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
 	__clear_bit(KEY_RESERVED, input->keybit);
 
+	if (kpad->gpimapsize)
+		__set_bit(EV_SW, input->evbit);
+	for (i = 0; i < kpad->gpimapsize; i++)
+		__set_bit(kpad->gpimap[i].sw_evt, input->swbit);
+
 	error = input_register_device(input);
 	if (error) {
 		dev_err(&client->dev, "unable to register input device\n");
@@ -261,6 +586,13 @@ static int __devinit adp5588_probe(struct i2c_client *client,
 	if (error)
 		goto err_free_irq;
 
+	if (kpad->gpimapsize)
+		adp5588_report_switch_state(kpad);
+
+	error = adp5588_gpio_add(kpad);
+	if (error)
+		goto err_free_irq;
+
 	device_init_wakeup(&client->dev, 1);
 	i2c_set_clientdata(client, kpad);
 
@@ -287,6 +619,7 @@ static int __devexit adp5588_remove(struct i2c_client *client)
 	free_irq(client->irq, kpad);
 	cancel_delayed_work_sync(&kpad->work);
 	input_unregister_device(kpad->input);
+	adp5588_gpio_remove(kpad);
 	kfree(kpad);
 
 	return 0;
diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c
index b8213fd13c3..6069abe31e4 100644
--- a/drivers/input/keyboard/gpio_keys.c
+++ b/drivers/input/keyboard/gpio_keys.c
@@ -31,6 +31,7 @@ struct gpio_button_data {
 	struct input_dev *input;
 	struct timer_list timer;
 	struct work_struct work;
+	int timer_debounce;	/* in msecs */
 	bool disabled;
 };
 
@@ -38,6 +39,8 @@ struct gpio_keys_drvdata {
 	struct input_dev *input;
 	struct mutex disable_lock;
 	unsigned int n_buttons;
+	int (*enable)(struct device *dev);
+	void (*disable)(struct device *dev);
 	struct gpio_button_data data[0];
 };
 
@@ -109,7 +112,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata)
 		 * Disable IRQ and possible debouncing timer.
 		 */
 		disable_irq(gpio_to_irq(bdata->button->gpio));
-		if (bdata->button->debounce_interval)
+		if (bdata->timer_debounce)
 			del_timer_sync(&bdata->timer);
 
 		bdata->disabled = true;
@@ -347,9 +350,9 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id)
 
 	BUG_ON(irq != gpio_to_irq(button->gpio));
 
-	if (button->debounce_interval)
+	if (bdata->timer_debounce)
 		mod_timer(&bdata->timer,
-			jiffies + msecs_to_jiffies(button->debounce_interval));
+			jiffies + msecs_to_jiffies(bdata->timer_debounce));
 	else
 		schedule_work(&bdata->work);
 
@@ -383,6 +386,14 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev,
 		goto fail3;
 	}
 
+	if (button->debounce_interval) {
+		error = gpio_set_debounce(button->gpio,
+					  button->debounce_interval * 1000);
+		/* use timer if gpiolib doesn't provide debounce */
+		if (error < 0)
+			bdata->timer_debounce = button->debounce_interval;
+	}
+
 	irq = gpio_to_irq(button->gpio);
 	if (irq < 0) {
 		error = irq;
@@ -414,6 +425,21 @@ fail2:
 	return error;
 }
 
+static int gpio_keys_open(struct input_dev *input)
+{
+	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+	return ddata->enable ? ddata->enable(input->dev.parent) : 0;
+}
+
+static void gpio_keys_close(struct input_dev *input)
+{
+	struct gpio_keys_drvdata *ddata = input_get_drvdata(input);
+
+	if (ddata->disable)
+		ddata->disable(input->dev.parent);
+}
+
 static int __devinit gpio_keys_probe(struct platform_device *pdev)
 {
 	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
@@ -435,13 +461,18 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
 
 	ddata->input = input;
 	ddata->n_buttons = pdata->nbuttons;
+	ddata->enable = pdata->enable;
+	ddata->disable = pdata->disable;
 	mutex_init(&ddata->disable_lock);
 
 	platform_set_drvdata(pdev, ddata);
+	input_set_drvdata(input, ddata);
 
 	input->name = pdev->name;
 	input->phys = "gpio-keys/input0";
 	input->dev.parent = &pdev->dev;
+	input->open = gpio_keys_open;
+	input->close = gpio_keys_close;
 
 	input->id.bustype = BUS_HOST;
 	input->id.vendor = 0x0001;
@@ -498,7 +529,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev)
  fail2:
 	while (--i >= 0) {
 		free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
@@ -526,7 +557,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev)
 	for (i = 0; i < pdata->nbuttons; i++) {
 		int irq = gpio_to_irq(pdata->buttons[i].gpio);
 		free_irq(irq, &ddata->data[i]);
-		if (pdata->buttons[i].debounce_interval)
+		if (ddata->data[i].timer_debounce)
 			del_timer_sync(&ddata->data[i].timer);
 		cancel_work_sync(&ddata->data[i].work);
 		gpio_free(pdata->buttons[i].gpio);
diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c
index c83f4b2ec7d..dcc86b97a15 100644
--- a/drivers/input/keyboard/hil_kbd.c
+++ b/drivers/input/keyboard/hil_kbd.c
@@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr)
 		if (absdev) {
 			val = lo + (hi << 8);
 #ifdef TABLET_AUTOADJUST
-			if (val < dev->absmin[ABS_X + i])
-				dev->absmin[ABS_X + i] = val;
-			if (val > dev->absmax[ABS_X + i])
-				dev->absmax[ABS_X + i] = val;
+			if (val < input_abs_min(dev, ABS_X + i))
+				input_abs_set_min(dev, ABS_X + i, val);
+			if (val > input_abs_max(dev, ABS_X + i))
+				input_abs_set_max(dev, ABS_X + i, val);
 #endif
-			if (i%3) val = dev->absmax[ABS_X + i] - val;
+			if (i % 3)
+				val = input_abs_max(dev, ABS_X + i) - val;
 			input_report_abs(dev, ABS_X + i, val);
 		} else {
-			val = (int) (((int8_t)lo) | ((int8_t)hi << 8));
+			val = (int) (((int8_t) lo) | ((int8_t) hi << 8));
 			if (i % 3)
 				val *= -1;
 			input_report_rel(dev, REL_X + i, val);
@@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr)
 
 #ifdef TABLET_AUTOADJUST
 		for (i = 0; i < ABS_MAX; i++) {
-			int diff = input_dev->absmax[ABS_X + i] / 10;
-			input_dev->absmin[ABS_X + i] += diff;
-			input_dev->absmax[ABS_X + i] -= diff;
+			int diff = input_abs_max(input_dev, ABS_X + i) / 10;
+			input_abs_set_min(input_dev, ABS_X + i,
+				input_abs_min(input_dev, ABS_X + i) + diff)
+			input_abs_set_max(input_dev, ABS_X + i,
+				input_abs_max(input_dev, ABS_X + i) - diff)
 		}
 #endif
 
diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c
index 40b032f0e32..f7c2a166576 100644
--- a/drivers/input/keyboard/lm8323.c
+++ b/drivers/input/keyboard/lm8323.c
@@ -642,6 +642,7 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 	struct lm8323_platform_data *pdata = client->dev.platform_data;
 	struct input_dev *idev;
 	struct lm8323_chip *lm;
+	int pwm;
 	int i, err;
 	unsigned long tmo;
 	u8 data[2];
@@ -710,8 +711,9 @@ static int __devinit lm8323_probe(struct i2c_client *client,
 		goto fail1;
 	}
 
-	for (i = 0; i < LM8323_NUM_PWMS; i++) {
-		err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]);
+	for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) {
+		err = init_pwm(lm, pwm + 1, &client->dev,
+			       pdata->pwm_names[pwm]);
 		if (err < 0)
 			goto fail2;
 	}
@@ -764,9 +766,9 @@ fail4:
 fail3:
 	device_remove_file(&client->dev, &dev_attr_disable_kp);
 fail2:
-	while (--i >= 0)
-		if (lm->pwm[i].enabled)
-			led_classdev_unregister(&lm->pwm[i].cdev);
+	while (--pwm >= 0)
+		if (lm->pwm[pwm].enabled)
+			led_classdev_unregister(&lm->pwm[pwm].cdev);
 fail1:
 	input_free_device(idev);
 	kfree(lm);
diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c
index b443e088fd3..b02e4268e18 100644
--- a/drivers/input/keyboard/matrix_keypad.c
+++ b/drivers/input/keyboard/matrix_keypad.c
@@ -37,6 +37,7 @@ struct matrix_keypad {
 	spinlock_t lock;
 	bool scan_pending;
 	bool stopped;
+	bool gpio_all_disabled;
 };
 
 /*
@@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		enable_irq(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			enable_irq(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 static void disable_row_irqs(struct matrix_keypad *keypad)
@@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad)
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
 	int i;
 
-	for (i = 0; i < pdata->num_row_gpios; i++)
-		disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	if (pdata->clustered_irq > 0)
+		disable_irq_nosync(pdata->clustered_irq);
+	else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i]));
+	}
 }
 
 /*
@@ -216,45 +225,69 @@ static void matrix_keypad_stop(struct input_dev *dev)
 }
 
 #ifdef CONFIG_PM
-static int matrix_keypad_suspend(struct device *dev)
+static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	matrix_keypad_stop(keypad->input_dev);
+	if (pdata->clustered_irq > 0) {
+		if (enable_irq_wake(pdata->clustered_irq) == 0)
+			keypad->gpio_all_disabled = true;
+	} else {
 
-	if (device_may_wakeup(&pdev->dev)) {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (!test_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
+				gpio = pdata->row_gpios[i];
 
 				if (enable_irq_wake(gpio_to_irq(gpio)) == 0)
 					__set_bit(i, keypad->disabled_gpios);
 			}
 		}
 	}
-
-	return 0;
 }
 
-static int matrix_keypad_resume(struct device *dev)
+static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad)
 {
-	struct platform_device *pdev = to_platform_device(dev);
-	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
 	const struct matrix_keypad_platform_data *pdata = keypad->pdata;
+	unsigned int gpio;
 	int i;
 
-	if (device_may_wakeup(&pdev->dev)) {
+	if (pdata->clustered_irq > 0) {
+		if (keypad->gpio_all_disabled) {
+			disable_irq_wake(pdata->clustered_irq);
+			keypad->gpio_all_disabled = false;
+		}
+	} else {
 		for (i = 0; i < pdata->num_row_gpios; i++) {
 			if (test_and_clear_bit(i, keypad->disabled_gpios)) {
-				unsigned int gpio = pdata->row_gpios[i];
-
+				gpio = pdata->row_gpios[i];
 				disable_irq_wake(gpio_to_irq(gpio));
 			}
 		}
 	}
+}
+
+static int matrix_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	matrix_keypad_stop(keypad->input_dev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_enable_wakeup(keypad);
+
+	return 0;
+}
+
+static int matrix_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct matrix_keypad *keypad = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(&pdev->dev))
+		matrix_keypad_disable_wakeup(keypad);
 
 	matrix_keypad_start(keypad->input_dev);
 
@@ -296,17 +329,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev,
 		gpio_direction_input(pdata->row_gpios[i]);
 	}
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+	if (pdata->clustered_irq > 0) {
+		err = request_irq(pdata->clustered_irq,
 				matrix_keypad_interrupt,
-				IRQF_DISABLED |
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				pdata->clustered_irq_flags,
 				"matrix-keypad", keypad);
 		if (err) {
 			dev_err(&pdev->dev,
-				"Unable to acquire interrupt for GPIO line %i\n",
-				pdata->row_gpios[i]);
-			goto err_free_irqs;
+				"Unable to acquire clustered interrupt\n");
+			goto err_free_rows;
+		}
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++) {
+			err = request_irq(gpio_to_irq(pdata->row_gpios[i]),
+					matrix_keypad_interrupt,
+					IRQF_DISABLED |
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					"matrix-keypad", keypad);
+			if (err) {
+				dev_err(&pdev->dev,
+					"Unable to acquire interrupt "
+					"for GPIO line %i\n",
+					pdata->row_gpios[i]);
+				goto err_free_irqs;
+			}
 		}
 	}
 
@@ -418,11 +465,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev)
 
 	device_init_wakeup(&pdev->dev, 0);
 
-	for (i = 0; i < pdata->num_row_gpios; i++) {
-		free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
-		gpio_free(pdata->row_gpios[i]);
+	if (pdata->clustered_irq > 0) {
+		free_irq(pdata->clustered_irq, keypad);
+	} else {
+		for (i = 0; i < pdata->num_row_gpios; i++)
+			free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad);
 	}
 
+	for (i = 0; i < pdata->num_row_gpios; i++)
+		gpio_free(pdata->row_gpios[i]);
+
 	for (i = 0; i < pdata->num_col_gpios; i++)
 		gpio_free(pdata->col_gpios[i]);
 
diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c
new file mode 100644
index 00000000000..63b849d7e90
--- /dev/null
+++ b/drivers/input/keyboard/mcs_touchkey.c
@@ -0,0 +1,239 @@
+/*
+ * mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+/* MCS5000 Touchkey */
+#define MCS5000_TOUCHKEY_STATUS		0x04
+#define MCS5000_TOUCHKEY_STATUS_PRESS	7
+#define MCS5000_TOUCHKEY_FW		0x0a
+#define MCS5000_TOUCHKEY_BASE_VAL	0x61
+
+/* MCS5080 Touchkey */
+#define MCS5080_TOUCHKEY_STATUS		0x00
+#define MCS5080_TOUCHKEY_STATUS_PRESS	3
+#define MCS5080_TOUCHKEY_FW		0x01
+#define MCS5080_TOUCHKEY_BASE_VAL	0x1
+
+enum mcs_touchkey_type {
+	MCS5000_TOUCHKEY,
+	MCS5080_TOUCHKEY,
+};
+
+struct mcs_touchkey_chip {
+	unsigned int status_reg;
+	unsigned int pressbit;
+	unsigned int press_invert;
+	unsigned int baseval;
+};
+
+struct mcs_touchkey_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct mcs_touchkey_chip chip;
+	unsigned int key_code;
+	unsigned int key_val;
+	unsigned short keycodes[];
+};
+
+static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id)
+{
+	struct mcs_touchkey_data *data = dev_id;
+	struct mcs_touchkey_chip *chip = &data->chip;
+	struct i2c_client *client = data->client;
+	struct input_dev *input = data->input_dev;
+	unsigned int key_val;
+	unsigned int pressed;
+	int val;
+
+	val = i2c_smbus_read_byte_data(client, chip->status_reg);
+	if (val < 0) {
+		dev_err(&client->dev, "i2c read error [%d]\n", val);
+		goto out;
+	}
+
+	pressed = (val & (1 << chip->pressbit)) >> chip->pressbit;
+	if (chip->press_invert)
+		pressed ^= chip->press_invert;
+
+	/* key_val is 0 when released, so we should use key_val of press. */
+	if (pressed) {
+		key_val = val & (0xff >> (8 - chip->pressbit));
+		if (!key_val)
+			goto out;
+		key_val -= chip->baseval;
+		data->key_code = data->keycodes[key_val];
+		data->key_val = key_val;
+	}
+
+	input_event(input, EV_MSC, MSC_SCAN, data->key_val);
+	input_report_key(input, data->key_code, pressed);
+	input_sync(input);
+
+	dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code,
+		pressed ? "pressed" : "released");
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static int __devinit mcs_touchkey_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs_touchkey_data *data;
+	struct input_dev *input_dev;
+	unsigned int fw_reg;
+	int fw_ver;
+	int error;
+	int i;
+
+	pdata = client->dev.platform_data;
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	data = kzalloc(sizeof(struct mcs_touchkey_data) +
+			sizeof(data->keycodes[0]) * (pdata->key_maxval + 1),
+			GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	if (id->driver_data == MCS5000_TOUCHKEY) {
+		data->chip.status_reg = MCS5000_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS;
+		data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5000_TOUCHKEY_FW;
+	} else {
+		data->chip.status_reg = MCS5080_TOUCHKEY_STATUS;
+		data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS;
+		data->chip.press_invert = 1;
+		data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL;
+		fw_reg = MCS5080_TOUCHKEY_FW;
+	}
+
+	fw_ver = i2c_smbus_read_byte_data(client, fw_reg);
+	if (fw_ver < 0) {
+		error = fw_ver;
+		dev_err(&client->dev, "i2c read error[%d]\n", error);
+		goto err_free_mem;
+	}
+	dev_info(&client->dev, "Firmware version: %d\n", fw_ver);
+
+	input_dev->name = "MELPAS MCS Touchkey";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+	input_dev->keycode = data->keycodes;
+	input_dev->keycodesize = sizeof(data->keycodes[0]);
+	input_dev->keycodemax = pdata->key_maxval + 1;
+
+	for (i = 0; i < pdata->keymap_size; i++) {
+		unsigned int val = MCS_KEY_VAL(pdata->keymap[i]);
+		unsigned int code = MCS_KEY_CODE(pdata->keymap[i]);
+
+		data->keycodes[val] = code;
+		__set_bit(code, input_dev->keybit);
+	}
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, data);
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt,
+			IRQF_TRIGGER_FALLING, client->dev.driver->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return error;
+}
+
+static int __devexit mcs_touchkey_remove(struct i2c_client *client)
+{
+	struct mcs_touchkey_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+
+	return 0;
+}
+
+static const struct i2c_device_id mcs_touchkey_id[] = {
+	{ "mcs5000_touchkey", MCS5000_TOUCHKEY },
+	{ "mcs5080_touchkey", MCS5080_TOUCHKEY },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id);
+
+static struct i2c_driver mcs_touchkey_driver = {
+	.driver = {
+		.name	= "mcs_touchkey",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= mcs_touchkey_probe,
+	.remove		= __devexit_p(mcs_touchkey_remove),
+	.id_table	= mcs_touchkey_id,
+};
+
+static int __init mcs_touchkey_init(void)
+{
+	return i2c_add_driver(&mcs_touchkey_driver);
+}
+
+static void __exit mcs_touchkey_exit(void)
+{
+	i2c_del_driver(&mcs_touchkey_driver);
+}
+
+module_init(mcs_touchkey_init);
+module_exit(mcs_touchkey_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
+MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
new file mode 100644
index 00000000000..f689f49e310
--- /dev/null
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -0,0 +1,491 @@
+/*
+ * Samsung keypad driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ * Author: Donghwa Lee <dh09.lee@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <plat/keypad.h>
+
+#define SAMSUNG_KEYIFCON			0x00
+#define SAMSUNG_KEYIFSTSCLR			0x04
+#define SAMSUNG_KEYIFCOL			0x08
+#define SAMSUNG_KEYIFROW			0x0c
+#define SAMSUNG_KEYIFFC				0x10
+
+/* SAMSUNG_KEYIFCON */
+#define SAMSUNG_KEYIFCON_INT_F_EN		(1 << 0)
+#define SAMSUNG_KEYIFCON_INT_R_EN		(1 << 1)
+#define SAMSUNG_KEYIFCON_DF_EN			(1 << 2)
+#define SAMSUNG_KEYIFCON_FC_EN			(1 << 3)
+#define SAMSUNG_KEYIFCON_WAKEUPEN		(1 << 4)
+
+/* SAMSUNG_KEYIFSTSCLR */
+#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK		(0xff << 0)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK		(0xff << 8)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET	8
+#define S5PV210_KEYIFSTSCLR_P_INT_MASK		(0x3fff << 0)
+#define S5PV210_KEYIFSTSCLR_R_INT_MASK		(0x3fff << 16)
+#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET	16
+
+/* SAMSUNG_KEYIFCOL */
+#define SAMSUNG_KEYIFCOL_MASK			(0xff << 0)
+#define S5PV210_KEYIFCOLEN_MASK			(0xff << 8)
+
+/* SAMSUNG_KEYIFROW */
+#define SAMSUNG_KEYIFROW_MASK			(0xff << 0)
+#define S5PV210_KEYIFROW_MASK			(0x3fff << 0)
+
+/* SAMSUNG_KEYIFFC */
+#define SAMSUNG_KEYIFFC_MASK			(0x3ff << 0)
+
+enum samsung_keypad_type {
+	KEYPAD_TYPE_SAMSUNG,
+	KEYPAD_TYPE_S5PV210,
+};
+
+struct samsung_keypad {
+	struct input_dev *input_dev;
+	struct clk *clk;
+	void __iomem *base;
+	wait_queue_head_t wait;
+	bool stopped;
+	int irq;
+	unsigned int row_shift;
+	unsigned int rows;
+	unsigned int cols;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned short keycodes[];
+};
+
+static int samsung_keypad_is_s5pv210(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	enum samsung_keypad_type type =
+		platform_get_device_id(pdev)->driver_data;
+
+	return type == KEYPAD_TYPE_S5PV210;
+}
+
+static void samsung_keypad_scan(struct samsung_keypad *keypad,
+				unsigned int *row_state)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int col;
+	unsigned int val;
+
+	for (col = 0; col < keypad->cols; col++) {
+		if (samsung_keypad_is_s5pv210(dev)) {
+			val = S5PV210_KEYIFCOLEN_MASK;
+			val &= ~(1 << col) << 8;
+		} else {
+			val = SAMSUNG_KEYIFCOL_MASK;
+			val &= ~(1 << col);
+		}
+
+		writel(val, keypad->base + SAMSUNG_KEYIFCOL);
+		mdelay(1);
+
+		val = readl(keypad->base + SAMSUNG_KEYIFROW);
+		row_state[col] = ~val & ((1 << keypad->rows) - 1);
+	}
+
+	/* KEYIFCOL reg clear */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static bool samsung_keypad_report(struct samsung_keypad *keypad,
+				  unsigned int *row_state)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	unsigned int changed;
+	unsigned int pressed;
+	unsigned int key_down = 0;
+	unsigned int val;
+	unsigned int col, row;
+
+	for (col = 0; col < keypad->cols; col++) {
+		changed = row_state[col] ^ keypad->row_state[col];
+		key_down |= row_state[col];
+		if (!changed)
+			continue;
+
+		for (row = 0; row < keypad->rows; row++) {
+			if (!(changed & (1 << row)))
+				continue;
+
+			pressed = row_state[col] & (1 << row);
+
+			dev_dbg(&keypad->input_dev->dev,
+				"key %s, row: %d, col: %d\n",
+				pressed ? "pressed" : "released", row, col);
+
+			val = MATRIX_SCAN_CODE(row, col, keypad->row_shift);
+
+			input_event(input_dev, EV_MSC, MSC_SCAN, val);
+			input_report_key(input_dev,
+					keypad->keycodes[val], pressed);
+		}
+		input_sync(keypad->input_dev);
+	}
+
+	memcpy(keypad->row_state, row_state, sizeof(keypad->row_state));
+
+	return key_down;
+}
+
+static irqreturn_t samsung_keypad_irq(int irq, void *dev_id)
+{
+	struct samsung_keypad *keypad = dev_id;
+	unsigned int row_state[SAMSUNG_MAX_COLS];
+	unsigned int val;
+	bool key_down;
+
+	do {
+		val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR);
+		/* Clear interrupt. */
+		writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+		samsung_keypad_scan(keypad, row_state);
+
+		key_down = samsung_keypad_report(keypad, row_state);
+		if (key_down)
+			wait_event_timeout(keypad->wait, keypad->stopped,
+					   msecs_to_jiffies(50));
+
+	} while (key_down && !keypad->stopped);
+
+	return IRQ_HANDLED;
+}
+
+static void samsung_keypad_start(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Tell IRQ thread that it may poll the device. */
+	keypad->stopped = false;
+
+	clk_enable(keypad->clk);
+
+	/* Enable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN;
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	/* KEYIFCOL reg clear. */
+	writel(0, keypad->base + SAMSUNG_KEYIFCOL);
+}
+
+static void samsung_keypad_stop(struct samsung_keypad *keypad)
+{
+	unsigned int val;
+
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	keypad->stopped = true;
+	wake_up(&keypad->wait);
+	disable_irq(keypad->irq);
+
+	/* Clear interrupt. */
+	writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR);
+
+	/* Disable interrupt bits. */
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN);
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+
+	/*
+	 * Now that chip should not generate interrupts we can safely
+	 * re-enable the handler.
+	 */
+	enable_irq(keypad->irq);
+}
+
+static int samsung_keypad_open(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_start(keypad);
+
+	return 0;
+}
+
+static void samsung_keypad_close(struct input_dev *input_dev)
+{
+	struct samsung_keypad *keypad = input_get_drvdata(input_dev);
+
+	samsung_keypad_stop(keypad);
+}
+
+static int __devinit samsung_keypad_probe(struct platform_device *pdev)
+{
+	const struct samsung_keypad_platdata *pdata;
+	const struct matrix_keymap_data *keymap_data;
+	struct samsung_keypad *keypad;
+	struct resource *res;
+	struct input_dev *input_dev;
+	unsigned int row_shift;
+	unsigned int keymap_size;
+	int error;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data defined\n");
+		return -EINVAL;
+	}
+
+	keymap_data = pdata->keymap_data;
+	if (!keymap_data) {
+		dev_err(&pdev->dev, "no keymap data defined\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS)
+		return -EINVAL;
+
+	if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS)
+		return -EINVAL;
+
+	/* initialize the gpio */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdata->rows, pdata->cols);
+
+	row_shift = get_count_order(pdata->cols);
+	keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]);
+
+	keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		error = -ENODEV;
+		goto err_free_mem;
+	}
+
+	keypad->base = ioremap(res->start, resource_size(res));
+	if (!keypad->base) {
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	keypad->clk = clk_get(&pdev->dev, "keypad");
+	if (IS_ERR(keypad->clk)) {
+		dev_err(&pdev->dev, "failed to get keypad clk\n");
+		error = PTR_ERR(keypad->clk);
+		goto err_unmap_base;
+	}
+
+	keypad->input_dev = input_dev;
+	keypad->row_shift = row_shift;
+	keypad->rows = pdata->rows;
+	keypad->cols = pdata->cols;
+	init_waitqueue_head(&keypad->wait);
+
+	input_dev->name = pdev->name;
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+	input_set_drvdata(input_dev, keypad);
+
+	input_dev->open = samsung_keypad_open;
+	input_dev->close = samsung_keypad_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY);
+	if (!pdata->no_autorepeat)
+		input_dev->evbit[0] |= BIT_MASK(EV_REP);
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+
+	input_dev->keycode = keypad->keycodes;
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = pdata->rows << row_shift;
+
+	matrix_keypad_build_keymap(keymap_data, row_shift,
+			input_dev->keycode, input_dev->keybit);
+
+	keypad->irq = platform_get_irq(pdev, 0);
+	if (keypad->irq < 0) {
+		error = keypad->irq;
+		goto err_put_clk;
+	}
+
+	error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq,
+			IRQF_ONESHOT, dev_name(&pdev->dev), keypad);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register keypad interrupt\n");
+		goto err_put_clk;
+	}
+
+	error = input_register_device(keypad->input_dev);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&pdev->dev, pdata->wakeup);
+	platform_set_drvdata(pdev, keypad);
+	return 0;
+
+err_free_irq:
+	free_irq(keypad->irq, keypad);
+err_put_clk:
+	clk_put(keypad->clk);
+err_unmap_base:
+	iounmap(keypad->base);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(keypad);
+
+	return error;
+}
+
+static int __devexit samsung_keypad_remove(struct platform_device *pdev)
+{
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+
+	device_init_wakeup(&pdev->dev, 0);
+	platform_set_drvdata(pdev, NULL);
+
+	input_unregister_device(keypad->input_dev);
+
+	/*
+	 * It is safe to free IRQ after unregistering device because
+	 * samsung_keypad_close will shut off interrupts.
+	 */
+	free_irq(keypad->irq, keypad);
+
+	clk_put(keypad->clk);
+
+	iounmap(keypad->base);
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad,
+					 bool enable)
+{
+	struct device *dev = keypad->input_dev->dev.parent;
+	unsigned int val;
+
+	clk_enable(keypad->clk);
+
+	val = readl(keypad->base + SAMSUNG_KEYIFCON);
+	if (enable) {
+		val |= SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			enable_irq_wake(keypad->irq);
+	} else {
+		val &= ~SAMSUNG_KEYIFCON_WAKEUPEN;
+		if (device_may_wakeup(dev))
+			disable_irq_wake(keypad->irq);
+	}
+	writel(val, keypad->base + SAMSUNG_KEYIFCON);
+
+	clk_disable(keypad->clk);
+}
+
+static int samsung_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		samsung_keypad_stop(keypad);
+
+	samsung_keypad_toggle_wakeup(keypad, true);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int samsung_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct samsung_keypad *keypad = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = keypad->input_dev;
+
+	mutex_lock(&input_dev->mutex);
+
+	samsung_keypad_toggle_wakeup(keypad, false);
+
+	if (input_dev->users)
+		samsung_keypad_start(keypad);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops samsung_keypad_pm_ops = {
+	.suspend	= samsung_keypad_suspend,
+	.resume		= samsung_keypad_resume,
+};
+#endif
+
+static struct platform_device_id samsung_keypad_driver_ids[] = {
+	{
+		.name		= "samsung-keypad",
+		.driver_data	= KEYPAD_TYPE_SAMSUNG,
+	}, {
+		.name		= "s5pv210-keypad",
+		.driver_data	= KEYPAD_TYPE_S5PV210,
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids);
+
+static struct platform_driver samsung_keypad_driver = {
+	.probe		= samsung_keypad_probe,
+	.remove		= __devexit_p(samsung_keypad_remove),
+	.driver		= {
+		.name	= "samsung-keypad",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &samsung_keypad_pm_ops,
+#endif
+	},
+	.id_table	= samsung_keypad_driver_ids,
+};
+
+static int __init samsung_keypad_init(void)
+{
+	return platform_driver_register(&samsung_keypad_driver);
+}
+module_init(samsung_keypad_init);
+
+static void __exit samsung_keypad_exit(void)
+{
+	platform_driver_unregister(&samsung_keypad_driver);
+}
+module_exit(samsung_keypad_exit);
+
+MODULE_DESCRIPTION("Samsung keypad driver");
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:samsung-keypad");
diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c
new file mode 100644
index 00000000000..ab7610ca10e
--- /dev/null
+++ b/drivers/input/keyboard/stmpe-keypad.c
@@ -0,0 +1,386 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/mfd/stmpe.h>
+
+/* These are at the same addresses in all STMPE variants */
+#define STMPE_KPC_COL			0x60
+#define STMPE_KPC_ROW_MSB		0x61
+#define STMPE_KPC_ROW_LSB		0x62
+#define STMPE_KPC_CTRL_MSB		0x63
+#define STMPE_KPC_CTRL_LSB		0x64
+#define STMPE_KPC_COMBI_KEY_0		0x65
+#define STMPE_KPC_COMBI_KEY_1		0x66
+#define STMPE_KPC_COMBI_KEY_2		0x67
+#define STMPE_KPC_DATA_BYTE0		0x68
+#define STMPE_KPC_DATA_BYTE1		0x69
+#define STMPE_KPC_DATA_BYTE2		0x6a
+#define STMPE_KPC_DATA_BYTE3		0x6b
+#define STMPE_KPC_DATA_BYTE4		0x6c
+
+#define STMPE_KPC_CTRL_LSB_SCAN		(0x1 << 0)
+#define STMPE_KPC_CTRL_LSB_DEBOUNCE	(0x7f << 1)
+#define STMPE_KPC_CTRL_MSB_SCAN_COUNT	(0xf << 4)
+
+#define STMPE_KPC_ROW_MSB_ROWS		0xff
+
+#define STMPE_KPC_DATA_UP		(0x1 << 7)
+#define STMPE_KPC_DATA_ROW		(0xf << 3)
+#define STMPE_KPC_DATA_COL		(0x7 << 0)
+#define STMPE_KPC_DATA_NOKEY_MASK	0x78
+
+#define STMPE_KEYPAD_MAX_DEBOUNCE	127
+#define STMPE_KEYPAD_MAX_SCAN_COUNT	15
+
+#define STMPE_KEYPAD_MAX_ROWS		8
+#define STMPE_KEYPAD_MAX_COLS		8
+#define STMPE_KEYPAD_ROW_SHIFT		3
+#define STMPE_KEYPAD_KEYMAP_SIZE	\
+	(STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS)
+
+/**
+ * struct stmpe_keypad_variant - model-specific attributes
+ * @auto_increment: whether the KPC_DATA_BYTE register address
+ *		    auto-increments on multiple read
+ * @num_data: number of data bytes
+ * @num_normal_data: number of normal keys' data bytes
+ * @max_cols: maximum number of columns supported
+ * @max_rows: maximum number of rows supported
+ * @col_gpios: bitmask of gpios which can be used for columns
+ * @row_gpios: bitmask of gpios which can be used for rows
+ */
+struct stmpe_keypad_variant {
+	bool		auto_increment;
+	int		num_data;
+	int		num_normal_data;
+	int		max_cols;
+	int		max_rows;
+	unsigned int	col_gpios;
+	unsigned int	row_gpios;
+};
+
+static const struct stmpe_keypad_variant stmpe_keypad_variants[] = {
+	[STMPE1601] = {
+		.auto_increment		= true,
+		.num_data		= 5,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 8,
+		.col_gpios		= 0x000ff,	/* GPIO 0 - 7 */
+		.row_gpios		= 0x0ff00,	/* GPIO 8 - 15 */
+	},
+	[STMPE2401] = {
+		.auto_increment		= false,
+		.num_data		= 3,
+		.num_normal_data	= 2,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+	[STMPE2403] = {
+		.auto_increment		= true,
+		.num_data		= 5,
+		.num_normal_data	= 3,
+		.max_cols		= 8,
+		.max_rows		= 12,
+		.col_gpios		= 0x0000ff,	/* GPIO 0 - 7*/
+		.row_gpios		= 0x1fef00,	/* GPIO 8-14, 16-20 */
+	},
+};
+
+struct stmpe_keypad {
+	struct stmpe *stmpe;
+	struct input_dev *input;
+	const struct stmpe_keypad_variant *variant;
+	const struct stmpe_keypad_platform_data *plat;
+
+	unsigned int rows;
+	unsigned int cols;
+
+	unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE];
+};
+
+static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+	int i;
+
+	if (variant->auto_increment)
+		return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0,
+					variant->num_data, data);
+
+	for (i = 0; i < variant->num_data; i++) {
+		ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i);
+		if (ret < 0)
+			return ret;
+
+		data[i] = ret;
+	}
+
+	return 0;
+}
+
+static irqreturn_t stmpe_keypad_irq(int irq, void *dev)
+{
+	struct stmpe_keypad *keypad = dev;
+	struct input_dev *input = keypad->input;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	u8 fifo[variant->num_data];
+	int ret;
+	int i;
+
+	ret = stmpe_keypad_read_data(keypad, fifo);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	for (i = 0; i < variant->num_normal_data; i++) {
+		u8 data = fifo[i];
+		int row = (data & STMPE_KPC_DATA_ROW) >> 3;
+		int col = data & STMPE_KPC_DATA_COL;
+		int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT);
+		bool up = data & STMPE_KPC_DATA_UP;
+
+		if ((data & STMPE_KPC_DATA_NOKEY_MASK)
+			== STMPE_KPC_DATA_NOKEY_MASK)
+			continue;
+
+		input_event(input, EV_MSC, MSC_SCAN, code);
+		input_report_key(input, keypad->keymap[code], !up);
+		input_sync(input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	unsigned int col_gpios = variant->col_gpios;
+	unsigned int row_gpios = variant->row_gpios;
+	struct stmpe *stmpe = keypad->stmpe;
+	unsigned int pins = 0;
+	int i;
+
+	/*
+	 * Figure out which pins need to be set to the keypad alternate
+	 * function.
+	 *
+	 * {cols,rows}_gpios are bitmasks of which pins on the chip can be used
+	 * for the keypad.
+	 *
+	 * keypad->{cols,rows} are a bitmask of which pins (of the ones useable
+	 * for the keypad) are used on the board.
+	 */
+
+	for (i = 0; i < variant->max_cols; i++) {
+		int num = __ffs(col_gpios);
+
+		if (keypad->cols & (1 << i))
+			pins |= 1 << num;
+
+		col_gpios &= ~(1 << num);
+	}
+
+	for (i = 0; i < variant->max_rows; i++) {
+		int num = __ffs(row_gpios);
+
+		if (keypad->rows & (1 << i))
+			pins |= 1 << num;
+
+		row_gpios &= ~(1 << num);
+	}
+
+	return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD);
+}
+
+static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad)
+{
+	const struct stmpe_keypad_platform_data *plat = keypad->plat;
+	const struct stmpe_keypad_variant *variant = keypad->variant;
+	struct stmpe *stmpe = keypad->stmpe;
+	int ret;
+
+	if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE)
+		return -EINVAL;
+
+	if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT)
+		return -EINVAL;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_keypad_altfunc_init(keypad);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols);
+	if (ret < 0)
+		return ret;
+
+	ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows);
+	if (ret < 0)
+		return ret;
+
+	if (variant->max_rows > 8) {
+		ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB,
+				     STMPE_KPC_ROW_MSB_ROWS,
+				     keypad->rows >> 8);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB,
+			     STMPE_KPC_CTRL_MSB_SCAN_COUNT,
+			     plat->scan_count << 4);
+	if (ret < 0)
+		return ret;
+
+	return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      STMPE_KPC_CTRL_LSB_DEBOUNCE,
+			      STMPE_KPC_CTRL_LSB_SCAN |
+			      (plat->debounce_ms << 1));
+}
+
+static int __devinit stmpe_keypad_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct stmpe_keypad_platform_data *plat;
+	struct stmpe_keypad *keypad;
+	struct input_dev *input;
+	int ret;
+	int irq;
+	int i;
+
+	plat = stmpe->pdata->keypad;
+	if (!plat)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL);
+	if (!keypad)
+		return -ENOMEM;
+
+	input = input_allocate_device();
+	if (!input) {
+		ret = -ENOMEM;
+		goto out_freekeypad;
+	}
+
+	input->name = "STMPE keypad";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &pdev->dev;
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT,
+				   input->keycode, input->keybit);
+
+	for (i = 0; i < plat->keymap_data->keymap_size; i++) {
+		unsigned int key = plat->keymap_data->keymap[i];
+
+		keypad->cols |= 1 << KEY_COL(key);
+		keypad->rows |= 1 << KEY_ROW(key);
+	}
+
+	keypad->stmpe = stmpe;
+	keypad->plat = plat;
+	keypad->input = input;
+	keypad->variant = &stmpe_keypad_variants[stmpe->partnum];
+
+	ret = stmpe_keypad_chip_init(keypad);
+	if (ret < 0)
+		goto out_freeinput;
+
+	ret = input_register_device(input);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"unable to register input device: %d\n", ret);
+		goto out_freeinput;
+	}
+
+	ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT,
+				   "stmpe-keypad", keypad);
+	if (ret) {
+		dev_err(&pdev->dev, "unable to get irq: %d\n", ret);
+		goto out_unregisterinput;
+	}
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+out_unregisterinput:
+	input_unregister_device(input);
+	input = NULL;
+out_freeinput:
+	input_free_device(input);
+out_freekeypad:
+	kfree(keypad);
+	return ret;
+}
+
+static int __devexit stmpe_keypad_remove(struct platform_device *pdev)
+{
+	struct stmpe_keypad *keypad = platform_get_drvdata(pdev);
+	struct stmpe *stmpe = keypad->stmpe;
+	int irq = platform_get_irq(pdev, 0);
+
+	stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD);
+
+	free_irq(irq, keypad);
+	input_unregister_device(keypad->input);
+	platform_set_drvdata(pdev, NULL);
+	kfree(keypad);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_keypad_driver = {
+	.driver.name	= "stmpe-keypad",
+	.driver.owner	= THIS_MODULE,
+	.probe		= stmpe_keypad_probe,
+	.remove		= __devexit_p(stmpe_keypad_remove),
+};
+
+static int __init stmpe_keypad_init(void)
+{
+	return platform_driver_register(&stmpe_keypad_driver);
+}
+module_init(stmpe_keypad_init);
+
+static void __exit stmpe_keypad_exit(void)
+{
+	platform_driver_unregister(&stmpe_keypad_driver);
+}
+module_exit(stmpe_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("STMPExxxx keypad driver");
+MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>");