Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge upstream tree in order to reinstate crct10dif.

7 files changed, 355 insertions, 132 deletions

diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index 84ccf140c1b..ea195360747 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -27,6 +27,9 @@
 #include <linux/interrupt.h>
 #include <linux/slab.h>
 #include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -961,9 +964,9 @@ static int ads7846_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
 
 static int ads7846_setup_pendown(struct spi_device *spi,
-					   struct ads7846 *ts)
+				 struct ads7846 *ts,
+				 const struct ads7846_platform_data *pdata)
 {
-	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	int err;
 
 	/*
@@ -1003,7 +1006,7 @@ static int ads7846_setup_pendown(struct spi_device *spi,
  * use formula #2 for pressure, not #3.
  */
 static void ads7846_setup_spi_msg(struct ads7846 *ts,
-				const struct ads7846_platform_data *pdata)
+				  const struct ads7846_platform_data *pdata)
 {
 	struct spi_message *m = &ts->msg[0];
 	struct spi_transfer *x = ts->xfer;
@@ -1201,33 +1204,107 @@ static void ads7846_setup_spi_msg(struct ads7846 *ts,
 	spi_message_add_tail(x, m);
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id ads7846_dt_ids[] = {
+	{ .compatible = "ti,tsc2046",	.data = (void *) 7846 },
+	{ .compatible = "ti,ads7843",	.data = (void *) 7843 },
+	{ .compatible = "ti,ads7845",	.data = (void *) 7845 },
+	{ .compatible = "ti,ads7846",	.data = (void *) 7846 },
+	{ .compatible = "ti,ads7873",	.data = (void *) 7873 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
+
+static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+{
+	struct ads7846_platform_data *pdata;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *match;
+
+	if (!node) {
+		dev_err(dev, "Device does not have associated DT data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	match = of_match_device(ads7846_dt_ids, dev);
+	if (!match) {
+		dev_err(dev, "Unknown device model\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->model = (unsigned long)match->data;
+
+	of_property_read_u16(node, "ti,vref-delay-usecs",
+			     &pdata->vref_delay_usecs);
+	of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv);
+	pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
+
+	pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy");
+
+	of_property_read_u16(node, "ti,settle-delay-usec",
+			     &pdata->settle_delay_usecs);
+	of_property_read_u16(node, "ti,penirq-recheck-delay-usecs",
+			     &pdata->penirq_recheck_delay_usecs);
+
+	of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms);
+	of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms);
+
+	of_property_read_u16(node, "ti,x-min", &pdata->x_min);
+	of_property_read_u16(node, "ti,y-min", &pdata->y_min);
+	of_property_read_u16(node, "ti,x-max", &pdata->x_max);
+	of_property_read_u16(node, "ti,y-max", &pdata->y_max);
+
+	of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min);
+	of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max);
+
+	of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max);
+	of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol);
+	of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep);
+
+	of_property_read_u32(node, "ti,pendown-gpio-debounce",
+			     &pdata->gpio_pendown_debounce);
+
+	pdata->wakeup = of_property_read_bool(node, "linux,wakeup");
+
+	pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
+
+	return pdata;
+}
+#else
+static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+{
+	dev_err(dev, "no platform data defined\n");
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
 static int ads7846_probe(struct spi_device *spi)
 {
+	const struct ads7846_platform_data *pdata;
 	struct ads7846 *ts;
 	struct ads7846_packet *packet;
 	struct input_dev *input_dev;
-	struct ads7846_platform_data *pdata = spi->dev.platform_data;
 	unsigned long irq_flags;
 	int err;
 
 	if (!spi->irq) {
 		dev_dbg(&spi->dev, "no IRQ?\n");
-		return -ENODEV;
-	}
-
-	if (!pdata) {
-		dev_dbg(&spi->dev, "no platform data?\n");
-		return -ENODEV;
+		return -EINVAL;
 	}
 
 	/* don't exceed max specified sample rate */
 	if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
-		dev_dbg(&spi->dev, "f(sample) %d KHz?\n",
+		dev_err(&spi->dev, "f(sample) %d KHz?\n",
 				(spi->max_speed_hz/SAMPLE_BITS)/1000);
 		return -EINVAL;
 	}
 
-	/* We'd set TX word size 8 bits and RX word size to 13 bits ... except
+	/*
+	 * We'd set TX word size 8 bits and RX word size to 13 bits ... except
 	 * that even if the hardware can do that, the SPI controller driver
 	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
 	 */
@@ -1250,17 +1327,25 @@ static int ads7846_probe(struct spi_device *spi)
 	ts->packet = packet;
 	ts->spi = spi;
 	ts->input = input_dev;
-	ts->vref_mv = pdata->vref_mv;
-	ts->swap_xy = pdata->swap_xy;
 
 	mutex_init(&ts->lock);
 	init_waitqueue_head(&ts->wait);
 
+	pdata = dev_get_platdata(&spi->dev);
+	if (!pdata) {
+		pdata = ads7846_probe_dt(&spi->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
 	ts->model = pdata->model ? : 7846;
 	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
 	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
 	ts->pressure_max = pdata->pressure_max ? : ~0;
 
+	ts->vref_mv = pdata->vref_mv;
+	ts->swap_xy = pdata->swap_xy;
+
 	if (pdata->filter != NULL) {
 		if (pdata->filter_init != NULL) {
 			err = pdata->filter_init(pdata, &ts->filter_data);
@@ -1281,7 +1366,7 @@ static int ads7846_probe(struct spi_device *spi)
 		ts->filter = ads7846_no_filter;
 	}
 
-	err = ads7846_setup_pendown(spi, ts);
+	err = ads7846_setup_pendown(spi, ts, pdata);
 	if (err)
 		goto err_cleanup_filter;
 
@@ -1370,6 +1455,13 @@ static int ads7846_probe(struct spi_device *spi)
 
 	device_init_wakeup(&spi->dev, pdata->wakeup);
 
+	/*
+	 * If device does not carry platform data we must have allocated it
+	 * when parsing DT data.
+	 */
+	if (!dev_get_platdata(&spi->dev))
+		devm_kfree(&spi->dev, (void *)pdata);
+
 	return 0;
 
  err_remove_attr_group:
@@ -1437,6 +1529,7 @@ static struct spi_driver ads7846_driver = {
 		.name	= "ads7846",
 		.owner	= THIS_MODULE,
 		.pm	= &ads7846_pm,
+		.of_match_table = of_match_ptr(ads7846_dt_ids),
 	},
 	.probe		= ads7846_probe,
 	.remove		= ads7846_remove,
diff --git a/drivers/input/touchscreen/cyttsp4_core.h b/drivers/input/touchscreen/cyttsp4_core.h
index 86a25435413..8e0d4d490b2 100644
--- a/drivers/input/touchscreen/cyttsp4_core.h
+++ b/drivers/input/touchscreen/cyttsp4_core.h
@@ -369,9 +369,9 @@ struct cyttsp4 {
 
 struct cyttsp4_bus_ops {
 	u16 bustype;
-	int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+	int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
 			const void *values);
-	int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+	int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
 			void *values);
 };
 
@@ -448,13 +448,13 @@ enum cyttsp4_event_id {
 /* y-axis, 0:origin is on top side of panel, 1: bottom */
 #define CY_PCFG_ORIGIN_Y_MASK		0x80
 
-static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u8 addr, int size,
+static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u16 addr, int size,
 		void *buf)
 {
 	return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf);
 }
 
-static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u8 addr, int size,
+static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u16 addr, int size,
 		const void *buf)
 {
 	return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf);
@@ -463,9 +463,9 @@ static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u8 addr, int size,
 extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
 		struct device *dev, u16 irq, size_t xfer_buf_size);
 extern int cyttsp4_remove(struct cyttsp4 *ts);
-int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
 		u8 length, const void *values);
-int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
 		u8 length, void *values);
 extern const struct dev_pm_ops cyttsp4_pm_ops;
 
diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c
index f8f891bead3..a71e1141d63 100644
--- a/drivers/input/touchscreen/cyttsp4_spi.c
+++ b/drivers/input/touchscreen/cyttsp4_spi.c
@@ -44,7 +44,7 @@
 #define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
 
 static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
-			   u8 op, u8 reg, u8 *buf, int length)
+			   u8 op, u16 reg, u8 *buf, int length)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct spi_message msg;
@@ -63,14 +63,12 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
 	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
 	memset(rd_buf, 0, CY_SPI_CMD_BYTES);
 
-	if (reg > 255)
-		wr_buf[0] = op + CY_SPI_A8_BIT;
-	else
-		wr_buf[0] = op;
-	if (op == CY_SPI_WR_OP)
-		wr_buf[1] = reg % 256;
-	if (op == CY_SPI_WR_OP && length > 0)
-		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+	wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0);
+	if (op == CY_SPI_WR_OP) {
+		wr_buf[1] = reg & 0xFF;
+		if (length > 0)
+			memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+	}
 
 	memset(xfer, 0, sizeof(xfer));
 	spi_message_init(&msg);
@@ -130,7 +128,7 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
 }
 
 static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
-				      u8 addr, u8 length, void *data)
+				      u16 addr, u8 length, void *data)
 {
 	int rc;
 
@@ -143,7 +141,7 @@ static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
 }
 
 static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
-				       u8 addr, u8 length, const void *data)
+				       u16 addr, u8 length, const void *data)
 {
 	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
 			length);
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
index 0cf564a79fb..07074110a90 100644
--- a/drivers/input/touchscreen/cyttsp_core.h
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -112,9 +112,9 @@ struct cyttsp;
 
 struct cyttsp_bus_ops {
 	u16 bustype;
-	int (*write)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+	int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
 			const void *values);
-	int (*read)(struct device *dev, u8 *xfer_buf, u8 addr, u8 length,
+	int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
 			void *values);
 };
 
@@ -145,9 +145,9 @@ struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
 			    struct device *dev, int irq, size_t xfer_buf_size);
 void cyttsp_remove(struct cyttsp *ts);
 
-int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
 		u8 length, const void *values);
-int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u8 addr,
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
 		u8 length, void *values);
 extern const struct dev_pm_ops cyttsp_pm_ops;
 
diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c
index 07c553fbcef..1d7b6f15416 100644
--- a/drivers/input/touchscreen/cyttsp_i2c_common.c
+++ b/drivers/input/touchscreen/cyttsp_i2c_common.c
@@ -32,18 +32,20 @@
 #include <linux/types.h>
 
 int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
-				      u8 addr, u8 length, void *values)
+				      u16 addr, u8 length, void *values)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	u8 client_addr = client->addr | ((addr >> 8) & 0x1);
+	u8 addr_lo = addr & 0xFF;
 	struct i2c_msg msgs[] = {
 		{
-			.addr = client->addr,
+			.addr = client_addr,
 			.flags = 0,
 			.len = 1,
-			.buf = &addr,
+			.buf = &addr_lo,
 		},
 		{
-			.addr = client->addr,
+			.addr = client_addr,
 			.flags = I2C_M_RD,
 			.len = length,
 			.buf = values,
@@ -60,17 +62,29 @@ int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
 EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
 
 int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
-				       u8 addr, u8 length, const void *values)
+				       u16 addr, u8 length, const void *values)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	u8 client_addr = client->addr | ((addr >> 8) & 0x1);
+	u8 addr_lo = addr & 0xFF;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client_addr,
+			.flags = 0,
+			.len = length + 1,
+			.buf = xfer_buf,
+		},
+	};
 	int retval;
 
-	xfer_buf[0] = addr;
+	xfer_buf[0] = addr_lo;
 	memcpy(&xfer_buf[1], values, length);
 
-	retval = i2c_master_send(client, xfer_buf, length + 1);
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
 
-	return retval < 0 ? retval : 0;
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
 }
 EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
 
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
index 1df625337b8..4728bcb1916 100644
--- a/drivers/input/touchscreen/cyttsp_spi.c
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -41,7 +41,7 @@
 #define CY_SPI_BITS_PER_WORD	8
 
 static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
-			   u8 op, u8 reg, u8 *buf, int length)
+			   u8 op, u16 reg, u8 *buf, int length)
 {
 	struct spi_device *spi = to_spi_device(dev);
 	struct spi_message msg;
@@ -126,14 +126,14 @@ static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
 }
 
 static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
-				      u8 addr, u8 length, void *data)
+				      u16 addr, u8 length, void *data)
 {
 	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
 			length);
 }
 
 static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
-				       u8 addr, u8 length, const void *data)
+				       u16 addr, u8 length, const void *data)
 {
 	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
 			length);
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
index 50fb1293874..e1c5300cacf 100644
--- a/drivers/input/touchscreen/ti_am335x_tsc.c
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -24,8 +24,9 @@
 #include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/input/ti_am335x_tsc.h>
 #include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <linux/mfd/ti_am335x_tscadc.h>
 
@@ -33,6 +34,13 @@
 #define SEQ_SETTLE		275
 #define MAX_12BIT		((1 << 12) - 1)
 
+static const int config_pins[] = {
+	STEPCONFIG_XPP,
+	STEPCONFIG_XNN,
+	STEPCONFIG_YPP,
+	STEPCONFIG_YNN,
+};
+
 struct titsc {
 	struct input_dev	*input;
 	struct ti_tscadc_dev	*mfd_tscadc;
@@ -40,7 +48,10 @@ struct titsc {
 	unsigned int		wires;
 	unsigned int		x_plate_resistance;
 	bool			pen_down;
-	int			steps_to_configure;
+	int			coordinate_readouts;
+	u32			config_inp[4];
+	u32			bit_xp, bit_xn, bit_yp, bit_yn;
+	u32			inp_xp, inp_xn, inp_yp, inp_yn;
 };
 
 static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
@@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg,
 	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
 }
 
+static int titsc_config_wires(struct titsc *ts_dev)
+{
+	u32 analog_line[4];
+	u32 wire_order[4];
+	int i, bit_cfg;
+
+	for (i = 0; i < 4; i++) {
+		/*
+		 * Get the order in which TSC wires are attached
+		 * w.r.t. each of the analog input lines on the EVM.
+		 */
+		analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
+		wire_order[i] = ts_dev->config_inp[i] & 0x0F;
+		if (WARN_ON(analog_line[i] > 7))
+			return -EINVAL;
+		if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
+			return -EINVAL;
+	}
+
+	for (i = 0; i < 4; i++) {
+		int an_line;
+		int wi_order;
+
+		an_line = analog_line[i];
+		wi_order = wire_order[i];
+		bit_cfg = config_pins[wi_order];
+		if (bit_cfg == 0)
+			return -EINVAL;
+		switch (wi_order) {
+		case 0:
+			ts_dev->bit_xp = bit_cfg;
+			ts_dev->inp_xp = an_line;
+			break;
+
+		case 1:
+			ts_dev->bit_xn = bit_cfg;
+			ts_dev->inp_xn = an_line;
+			break;
+
+		case 2:
+			ts_dev->bit_yp = bit_cfg;
+			ts_dev->inp_yp = an_line;
+			break;
+		case 3:
+			ts_dev->bit_yn = bit_cfg;
+			ts_dev->inp_yn = an_line;
+			break;
+		}
+	}
+	return 0;
+}
+
 static void titsc_step_config(struct titsc *ts_dev)
 {
 	unsigned int	config;
-	int i, total_steps;
-
-	/* Configure the Step registers */
-	total_steps = 2 * ts_dev->steps_to_configure;
+	int i;
+	int end_step;
+	u32 stepenable;
 
 	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_AVG_16 | STEPCONFIG_XPP;
+			STEPCONFIG_AVG_16 | ts_dev->bit_xp;
 	switch (ts_dev->wires) {
 	case 4:
-		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
 		break;
 	case 5:
-		config |= STEPCONFIG_YNN |
-				STEPCONFIG_INP_AN4 | STEPCONFIG_XNN |
-				STEPCONFIG_YPP;
+		config |= ts_dev->bit_yn |
+				STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
+				ts_dev->bit_yp;
 		break;
 	case 8:
-		config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN;
+		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
 		break;
 	}
 
-	for (i = 1; i <= ts_dev->steps_to_configure; i++) {
+	/* 1 … coordinate_readouts is for X */
+	end_step = ts_dev->coordinate_readouts;
+	for (i = 0; i < end_step; i++) {
 		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
 	}
 
 	config = 0;
 	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_AVG_16 | STEPCONFIG_YNN |
-			STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1;
+			STEPCONFIG_AVG_16 | ts_dev->bit_yn |
+			STEPCONFIG_INM_ADCREFM;
 	switch (ts_dev->wires) {
 	case 4:
-		config |= STEPCONFIG_YPP;
+		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
 		break;
 	case 5:
-		config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 |
-				STEPCONFIG_XNP | STEPCONFIG_YPN;
+		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
+				ts_dev->bit_xn | ts_dev->bit_yp;
 		break;
 	case 8:
-		config |= STEPCONFIG_YPP;
+		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
 		break;
 	}
 
-	for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) {
+	/* coordinate_readouts … coordinate_readouts * 2 is for Y */
+	end_step = ts_dev->coordinate_readouts * 2;
+	for (i = ts_dev->coordinate_readouts; i < end_step; i++) {
 		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
 		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
 	}
 
-	config = 0;
 	/* Charge step configuration */
-	config = STEPCONFIG_XPP | STEPCONFIG_YNN |
+	config = ts_dev->bit_xp | ts_dev->bit_yn |
 			STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR |
-			STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1;
+			STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp);
 
 	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
 	titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY);
 
-	config = 0;
-	/* Configure to calculate pressure */
+	/* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */
 	config = STEPCONFIG_MODE_HWSYNC |
-			STEPCONFIG_AVG_16 | STEPCONFIG_YPP |
-			STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM;
-	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config);
-	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1),
+			STEPCONFIG_AVG_16 | ts_dev->bit_yp |
+			ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
+			STEPCONFIG_INP(ts_dev->inp_xp);
+	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
 			STEPCONFIG_OPENDLY);
 
-	config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1;
-	titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config);
-	titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2),
+	end_step++;
+	config |= STEPCONFIG_INP(ts_dev->inp_yn);
+	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
 			STEPCONFIG_OPENDLY);
 
-	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
+	/* The steps1 … end and bit 0 for TS_Charge */
+	stepenable = (1 << (end_step + 2)) - 1;
+	am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable);
 }
 
 static void titsc_read_coordinates(struct titsc *ts_dev,
-				    unsigned int *x, unsigned int *y)
+		u32 *x, u32 *y, u32 *z1, u32 *z2)
 {
 	unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT);
 	unsigned int prev_val_x = ~0, prev_val_y = ~0;
 	unsigned int prev_diff_x = ~0, prev_diff_y = ~0;
 	unsigned int read, diff;
 	unsigned int i, channel;
+	unsigned int creads = ts_dev->coordinate_readouts;
 
+	*z1 = *z2 = 0;
+	if (fifocount % (creads * 2 + 2))
+		fifocount -= fifocount % (creads * 2 + 2);
 	/*
 	 * Delta filter is used to remove large variations in sampled
 	 * values from ADC. The filter tries to predict where the next
@@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev,
 	 * algorithm compares the difference with that of a present value,
 	 * if true the value is reported to the sub system.
 	 */
-	for (i = 0; i < fifocount - 1; i++) {
+	for (i = 0; i < fifocount; i++) {
 		read = titsc_readl(ts_dev, REG_FIFO0);
-		channel = read & 0xf0000;
-		channel = channel >> 0x10;
-		if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) {
-			read &= 0xfff;
+
+		channel = (read & 0xf0000) >> 16;
+		read &= 0xfff;
+		if (channel < creads) {
 			diff = abs(read - prev_val_x);
 			if (diff < prev_diff_x) {
 				prev_diff_x = diff;
 				*x = read;
 			}
 			prev_val_x = read;
-		}
 
-		read = titsc_readl(ts_dev, REG_FIFO1);
-		channel = read & 0xf0000;
-		channel = channel >> 0x10;
-		if ((channel >= ts_dev->steps_to_configure) &&
-			(channel < (2 * ts_dev->steps_to_configure - 1))) {
-			read &= 0xfff;
+		} else if (channel < creads * 2) {
 			diff = abs(read - prev_val_y);
 			if (diff < prev_diff_y) {
 				prev_diff_y = diff;
 				*y = read;
 			}
 			prev_val_y = read;
+
+		} else if (channel < creads * 2 + 1) {
+			*z1 = read;
+
+		} else if (channel < creads * 2 + 2) {
+			*z2 = read;
 		}
 	}
 }
@@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 	unsigned int x = 0, y = 0;
 	unsigned int z1, z2, z;
 	unsigned int fsm;
-	unsigned int fifo1count, fifo0count;
-	int i;
 
 	status = titsc_readl(ts_dev, REG_IRQSTATUS);
 	if (status & IRQENB_FIFO0THRES) {
-		titsc_read_coordinates(ts_dev, &x, &y);
 
-		z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff;
-		z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff;
-
-		fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT);
-		for (i = 0; i < fifo1count; i++)
-			titsc_readl(ts_dev, REG_FIFO1);
-
-		fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT);
-		for (i = 0; i < fifo0count; i++)
-			titsc_readl(ts_dev, REG_FIFO0);
+		titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
 
 		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
 			/*
@@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 			 * Resistance(touch) = x plate resistance *
 			 * x postion/4096 * ((z2 / z1) - 1)
 			 */
-			z = z2 - z1;
+			z = z1 - z2;
 			z *= x;
 			z *= ts_dev->x_plate_resistance;
-			z /= z1;
+			z /= z2;
 			z = (z + 2047) >> 12;
 
 			if (z <= MAX_12BIT) {
@@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 		irqclr |= IRQENB_PENUP;
 	}
 
-	titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+	if (status & IRQENB_HW_PEN) {
+
+		titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
+		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+	}
 
-	titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC);
-	return IRQ_HANDLED;
+	if (irqclr) {
+		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+		am335x_tsc_se_update(ts_dev->mfd_tscadc);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static int titsc_parse_dt(struct platform_device *pdev,
+					struct titsc *ts_dev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int err;
+
+	if (!node)
+		return -EINVAL;
+
+	err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
+	if (err < 0)
+		return err;
+	switch (ts_dev->wires) {
+	case 4:
+	case 5:
+	case 8:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = of_property_read_u32(node, "ti,x-plate-resistance",
+			&ts_dev->x_plate_resistance);
+	if (err < 0)
+		return err;
+
+	err = of_property_read_u32(node, "ti,coordiante-readouts",
+			&ts_dev->coordinate_readouts);
+	if (err < 0)
+		return err;
+
+	return of_property_read_u32_array(node, "ti,wire-config",
+			ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
 }
 
 /*
@@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev)
 {
 	struct titsc *ts_dev;
 	struct input_dev *input_dev;
-	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
-	struct mfd_tscadc_board	*pdata;
+	struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
 	int err;
 
-	pdata = tscadc_dev->dev->platform_data;
-
-	if (!pdata) {
-		dev_err(&pdev->dev, "Could not find platform data\n");
-		return -EINVAL;
-	}
-
 	/* Allocate memory for device */
 	ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
 	input_dev = input_allocate_device();
@@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev)
 	ts_dev->mfd_tscadc = tscadc_dev;
 	ts_dev->input = input_dev;
 	ts_dev->irq = tscadc_dev->irq;
-	ts_dev->wires = pdata->tsc_init->wires;
-	ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
-	ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
+
+	err = titsc_parse_dt(pdev, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "Could not find valid DT data.\n");
+		goto err_free_mem;
+	}
 
 	err = request_irq(ts_dev->irq, titsc_irq,
 			  0, pdev->dev.driver->name, ts_dev);
@@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev)
 	}
 
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+	err = titsc_config_wires(ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "wrong i/p wire configuration\n");
+		goto err_free_irq;
+	}
 	titsc_step_config(ts_dev);
-	titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure);
+	titsc_writel(ts_dev, REG_FIFO0THR,
+			ts_dev->coordinate_readouts * 2 + 2 - 1);
 
 	input_dev->name = "ti-tsc";
 	input_dev->dev.parent = &pdev->dev;
@@ -329,11 +433,16 @@ err_free_mem:
 
 static int titsc_remove(struct platform_device *pdev)
 {
-	struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
-	struct titsc *ts_dev = tscadc_dev->tsc;
+	struct titsc *ts_dev = platform_get_drvdata(pdev);
+	u32 steps;
 
 	free_irq(ts_dev->irq, ts_dev);
 
+	/* total steps followed by the enable mask */
+	steps = 2 * ts_dev->coordinate_readouts + 2;
+	steps = (1 << steps) - 1;
+	am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
+
 	input_unregister_device(ts_dev->input);
 
 	kfree(ts_dev);
@@ -343,10 +452,11 @@ static int titsc_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int titsc_suspend(struct device *dev)
 {
-	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
-	struct titsc *ts_dev = tscadc_dev->tsc;
+	struct titsc *ts_dev = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc_dev;
 	unsigned int idle;
 
+	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(tscadc_dev->dev)) {
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
 		titsc_writel(ts_dev, REG_IRQENABLE,
@@ -358,9 +468,10 @@ static int titsc_suspend(struct device *dev)
 
 static int titsc_resume(struct device *dev)
 {
-	struct ti_tscadc_dev *tscadc_dev = dev->platform_data;
-	struct titsc *ts_dev = tscadc_dev->tsc;
+	struct titsc *ts_dev = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc_dev;
 
+	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(tscadc_dev->dev)) {
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);
@@ -368,7 +479,7 @@ static int titsc_resume(struct device *dev)
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,
-			ts_dev->steps_to_configure);
+			ts_dev->coordinate_readouts * 2 + 2 - 1);
 	return 0;
 }
 
@@ -381,13 +492,20 @@ static const struct dev_pm_ops titsc_pm_ops = {
 #define TITSC_PM_OPS NULL
 #endif
 
+static const struct of_device_id ti_tsc_dt_ids[] = {
+	{ .compatible = "ti,am3359-tsc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
+
 static struct platform_driver ti_tsc_driver = {
 	.probe	= titsc_probe,
 	.remove	= titsc_remove,
 	.driver	= {
-		.name   = "tsc",
+		.name   = "TI-am335x-tsc",
 		.owner	= THIS_MODULE,
 		.pm	= TITSC_PM_OPS,
+		.of_match_table = of_match_ptr(ti_tsc_dt_ids),
 	},
 };
 module_platform_driver(ti_tsc_driver);