isdn: whitespace coding style cleanup

isdn source code uses a not-current coding style.

Update the coding style used on a per-line basis
so that git diff -w shows only elided blank lines
at EOF.

Done with emacs and some scripts and some typing.

Built x86 allyesconfig.
No detected change in objdump -d or size.

Signed-off-by: Joe Perches <joe@perches.com>

1 files changed, 164 insertions, 164 deletions

diff --git a/drivers/isdn/hisax/sedlbauer.c b/drivers/isdn/hisax/sedlbauer.c
index 69dfc8d2901..1ee531b6be9 100644
--- a/drivers/isdn/hisax/sedlbauer.c
+++ b/drivers/isdn/hisax/sedlbauer.c
@@ -9,7 +9,7 @@
  *
  * Author       Marcus Niemann
  * Copyright    by Marcus Niemann    <niemann@www-bib.fh-bielefeld.de>
- * 
+ *
  * This software may be used and distributed according to the terms
  * of the GNU General Public License, incorporated herein by reference.
  *
@@ -30,13 +30,13 @@
  * ISDN PC/104	IPAC		DIP-SWITCH
  * Speed Star2	IPAC		CARDMGR
  * Speed PCI	IPAC		PCI PNP
- * Speed Fax+ 	ISAC_ISAR	PCI PNP		Full analog support
+ * Speed Fax+	ISAC_ISAR	PCI PNP		Full analog support
  *
  * Important:
  * For the sedlbauer speed fax+ to work properly you have to download
  * the firmware onto the card.
  * For example: hisaxctrl <DriverID> 9 ISAR.BIN
-*/
+ */
 
 #include <linux/init.h>
 #include "hisax.h"
@@ -51,9 +51,9 @@
 static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
 
 static const char *Sedlbauer_Types[] =
-	{"None", "speed card/win", "speed star", "speed fax+",
-	"speed win II / ISDN PC/104", "speed star II", "speed pci",
-	"speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
+{"None", "speed card/win", "speed star", "speed fax+",
+ "speed win II / ISDN PC/104", "speed star II", "speed pci",
+ "speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
 
 #define PCI_SUBVENDOR_SPEEDFAX_PYRAMID	0x51
 #define PCI_SUBVENDOR_HST_SAPHIR3	0x52
@@ -62,11 +62,11 @@ static const char *Sedlbauer_Types[] =
 #define PCI_SUB_ID_SEDLBAUER		0x01
 
 #define SEDL_SPEED_CARD_WIN	1
-#define SEDL_SPEED_STAR 	2
+#define SEDL_SPEED_STAR		2
 #define SEDL_SPEED_FAX		3
-#define SEDL_SPEED_WIN2_PC104 	4
-#define SEDL_SPEED_STAR2 	5
-#define SEDL_SPEED_PCI   	6
+#define SEDL_SPEED_WIN2_PC104	4
+#define SEDL_SPEED_STAR2	5
+#define SEDL_SPEED_PCI		6
 #define SEDL_SPEEDFAX_PYRAMID	7
 #define SEDL_SPEEDFAX_PCI	8
 #define HST_SAPHIR3		9
@@ -80,7 +80,7 @@ static const char *Sedlbauer_Types[] =
 #define SEDL_BUS_PCI		2
 #define	SEDL_BUS_PCMCIA		3
 
-#define byteout(addr,val) outb(val,addr)
+#define byteout(addr, val) outb(val, addr)
 #define bytein(addr) inb(addr)
 
 #define SEDL_HSCX_ISA_RESET_ON	0
@@ -127,7 +127,7 @@ readreg(unsigned int ale, unsigned int adr, u_char off)
 }
 
 static inline void
-readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	byteout(ale, off);
 	insb(adr, data, size);
@@ -142,7 +142,7 @@ writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
 }
 
 static inline void
-writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
+writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
 {
 	byteout(ale, off);
 	outsb(adr, data, size);
@@ -163,13 +163,13 @@ WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
 }
 
 static void
-ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
 }
 
 static void
-WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
 }
@@ -177,23 +177,23 @@ WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
 static u_char
 ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
 {
-	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
+	return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80));
 }
 
 static void
 WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
 {
-	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
+	writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset | 0x80, value);
 }
 
 static void
-ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
 {
 	readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
 }
 
 static void
-WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
+WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char *data, int size)
 {
 	writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
 }
@@ -220,12 +220,12 @@ WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
 
 static u_char
 ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
-{	
+{
 	if (mode == 0)
 		return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
 	else if (mode == 1)
 		byteout(cs->hw.sedl.adr, offset);
-	return(bytein(cs->hw.sedl.hscx));
+	return (bytein(cs->hw.sedl.hscx));
 }
 
 static void
@@ -244,16 +244,16 @@ WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
  * fast interrupt HSCX stuff goes here
  */
 
-#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
-#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
+#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr,			\
+				      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
+#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr,		\
+					      cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
 
-#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr,	\
+						cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
 
-#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
-		cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
+#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr,	\
+						  cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
 
 #include "hscx_irq.c"
 
@@ -274,11 +274,11 @@ sedlbauer_interrupt(int intno, void *dev_id)
 	}
 
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
-      Start_HSCX:
+Start_HSCX:
 	if (val)
 		hscx_int_main(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-      Start_ISAC:
+Start_ISAC:
 	if (val)
 		isac_interrupt(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
@@ -360,11 +360,11 @@ sedlbauer_interrupt_isar(int intno, void *dev_id)
 
 	spin_lock_irqsave(&cs->lock, flags);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
-      Start_ISAR:
+Start_ISAR:
 	if (val & ISAR_IRQSTA)
 		isar_int_main(cs);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
-      Start_ISAC:
+Start_ISAC:
 	if (val)
 		isac_interrupt(cs, val);
 	val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
@@ -411,7 +411,7 @@ reset_sedlbauer(struct IsdnCardState *cs)
 	printk(KERN_INFO "Sedlbauer: resetting card\n");
 
 	if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
-	   (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
+	      (cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
 		if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
 			mdelay(2);
@@ -423,12 +423,12 @@ reset_sedlbauer(struct IsdnCardState *cs)
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
 			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
 		} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
-			(cs->hw.sedl.bus == SEDL_BUS_PCI)) {
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+			   (cs->hw.sedl.bus == SEDL_BUS_PCI)) {
+			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
 			mdelay(2);
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+			byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
 			mdelay(10);
-		} else {		
+		} else {
 			byteout(cs->hw.sedl.reset_on, SEDL_RESET);	/* Reset On */
 			mdelay(2);
 			byteout(cs->hw.sedl.reset_off, 0);	/* Reset Off */
@@ -443,86 +443,86 @@ Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
 	u_long flags;
 
 	switch (mt) {
-		case CARD_RESET:
-			spin_lock_irqsave(&cs->lock, flags);
-			reset_sedlbauer(cs);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_RELEASE:
-			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-				/* disable all IRQ */
-				byteout(cs->hw.sedl.cfg_reg+ 5, 0);
-			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-				spin_lock_irqsave(&cs->lock, flags);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-					ISAC_MASK, 0xFF);
-				reset_sedlbauer(cs);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
-					ISAC_MASK, 0xFF);
-				spin_unlock_irqrestore(&cs->lock, flags);
-			}
-			release_io_sedlbauer(cs);
-			return(0);
-		case CARD_INIT:
+	case CARD_RESET:
+		spin_lock_irqsave(&cs->lock, flags);
+		reset_sedlbauer(cs);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_RELEASE:
+		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+			/* disable all IRQ */
+			byteout(cs->hw.sedl.cfg_reg + 5, 0);
+		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 			spin_lock_irqsave(&cs->lock, flags);
-			if (cs->hw.sedl.bus == SEDL_BUS_PCI)
-				/* enable all IRQ */
-				byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+				 ISAC_MASK, 0xFF);
 			reset_sedlbauer(cs);
-			if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
-				clear_pending_isac_ints(cs);
-				writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
-					ISAR_IRQBIT, 0);
-				initisac(cs);
-				initisar(cs);
-				/* Reenable all IRQ */
-				cs->writeisac(cs, ISAC_MASK, 0);
-				/* RESET Receiver and Transmitter */
-				cs->writeisac(cs, ISAC_CMDR, 0x41);
-			} else {
-				inithscxisac(cs, 3);
-			}
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
+				 ISAC_MASK, 0xFF);
 			spin_unlock_irqrestore(&cs->lock, flags);
-			return(0);
-		case CARD_TEST:
-			return(0);
-		case MDL_INFO_CONN:
-			if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-				return(0);
-			spin_lock_irqsave(&cs->lock, flags);
-			if ((long) arg)
-				cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
-			else
-				cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			break;
-		case MDL_INFO_REL:
-			if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
-				return(0);
-			spin_lock_irqsave(&cs->lock, flags);
-			if ((long) arg)
-				cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
-			else
-				cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
-			byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
-			spin_unlock_irqrestore(&cs->lock, flags);
-			break;
+		}
+		release_io_sedlbauer(cs);
+		return (0);
+	case CARD_INIT:
+		spin_lock_irqsave(&cs->lock, flags);
+		if (cs->hw.sedl.bus == SEDL_BUS_PCI)
+			/* enable all IRQ */
+			byteout(cs->hw.sedl.cfg_reg + 5, 0x02);
+		reset_sedlbauer(cs);
+		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
+			clear_pending_isac_ints(cs);
+			writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
+				 ISAR_IRQBIT, 0);
+			initisac(cs);
+			initisar(cs);
+			/* Reenable all IRQ */
+			cs->writeisac(cs, ISAC_MASK, 0);
+			/* RESET Receiver and Transmitter */
+			cs->writeisac(cs, ISAC_CMDR, 0x41);
+		} else {
+			inithscxisac(cs, 3);
+		}
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return (0);
+	case CARD_TEST:
+		return (0);
+	case MDL_INFO_CONN:
+		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+			return (0);
+		spin_lock_irqsave(&cs->lock, flags);
+		if ((long) arg)
+			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
+		else
+			cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
+		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		break;
+	case MDL_INFO_REL:
+		if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
+			return (0);
+		spin_lock_irqsave(&cs->lock, flags);
+		if ((long) arg)
+			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
+		else
+			cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
+		byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
+		spin_unlock_irqrestore(&cs->lock, flags);
+		break;
 	}
-	return(0);
+	return (0);
 }
 
 #ifdef __ISAPNP__
 static struct isapnp_device_id sedl_ids[] __devinitdata = {
 	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01), 
+	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
 	  (unsigned long) "Speed win" },
 	{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
-	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02), 
+	  ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
 	  (unsigned long) "Speed Fax+" },
 	{ 0, }
 };
@@ -539,31 +539,31 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
 	if (!isapnp_present())
 		return -1;
 
-	while(ipid->card_vendor) {
+	while (ipid->card_vendor) {
 		if ((pnp_c = pnp_find_card(ipid->card_vendor,
-			ipid->card_device, pnp_c))) {
+					   ipid->card_device, pnp_c))) {
 			pnp_d = NULL;
 			if ((pnp_d = pnp_find_dev(pnp_c,
-				ipid->vendor, ipid->function, pnp_d))) {
+						  ipid->vendor, ipid->function, pnp_d))) {
 				int err;
 
 				printk(KERN_INFO "HiSax: %s detected\n",
-					(char *)ipid->driver_data);
+				       (char *)ipid->driver_data);
 				pnp_disable_dev(pnp_d);
 				err = pnp_activate_dev(pnp_d);
-				if (err<0) {
+				if (err < 0) {
 					printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
-						__func__, err);
-					return(0);
+					       __func__, err);
+					return (0);
 				}
 				card->para[1] = pnp_port_start(pnp_d, 0);
 				card->para[0] = pnp_irq(pnp_d, 0);
 
 				if (!card->para[0] || !card->para[1]) {
 					printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
-						card->para[0], card->para[1]);
+					       card->para[0], card->para[1]);
 					pnp_disable_dev(pnp_d);
-					return(0);
+					return (0);
 				}
 				cs->hw.sedl.cfg_reg = card->para[1];
 				cs->irq = card->para[0];
@@ -579,12 +579,12 @@ setup_sedlbauer_isapnp(struct IsdnCard *card, int *bytecnt)
 				return (1);
 			} else {
 				printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
-				return(0);
+				return (0);
 			}
 		}
 		ipid++;
 		pnp_c = NULL;
-	} 
+	}
 
 	printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
 	return -1;
@@ -608,30 +608,30 @@ setup_sedlbauer_pci(struct IsdnCard *card)
 	u16 sub_vendor_id, sub_id;
 
 	if ((dev_sedl = hisax_find_pci_device(PCI_VENDOR_ID_TIGERJET,
-			PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
+					      PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
 		if (pci_enable_device(dev_sedl))
-			return(0);
+			return (0);
 		cs->irq = dev_sedl->irq;
 		if (!cs->irq) {
 			printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
-			return(0);
+			return (0);
 		}
 		cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
 	} else {
 		printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
-		return(0);
+		return (0);
 	}
 	cs->irq_flags |= IRQF_SHARED;
 	cs->hw.sedl.bus = SEDL_BUS_PCI;
 	sub_vendor_id = dev_sedl->subsystem_vendor;
 	sub_id = dev_sedl->subsystem_device;
 	printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
-		sub_vendor_id, sub_id);
+	       sub_vendor_id, sub_id);
 	printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
-		cs->hw.sedl.cfg_reg);
+	       cs->hw.sedl.cfg_reg);
 	if (sub_id != PCI_SUB_ID_SEDLBAUER) {
 		printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
-		return(0);
+		return (0);
 	}
 	if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
 		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
@@ -647,19 +647,19 @@ setup_sedlbauer_pci(struct IsdnCard *card)
 		cs->subtyp = SEDL_SPEED_PCI;
 	} else {
 		printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
-			sub_vendor_id);
-		return(0);
+		       sub_vendor_id);
+		return (0);
 	}
 
 	cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
 	cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
 	byteout(cs->hw.sedl.cfg_reg, 0xff);
 	byteout(cs->hw.sedl.cfg_reg, 0x00);
-	byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
-	byteout(cs->hw.sedl.cfg_reg+ 5, 0); /* disable all IRQ */
-	byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
+	byteout(cs->hw.sedl.cfg_reg + 2, 0xdd);
+	byteout(cs->hw.sedl.cfg_reg + 5, 0); /* disable all IRQ */
+	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_on);
 	mdelay(2);
-	byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
+	byteout(cs->hw.sedl.cfg_reg + 3, cs->hw.sedl.reset_off);
 	mdelay(10);
 
 	return (1);
@@ -684,20 +684,20 @@ setup_sedlbauer(struct IsdnCard *card)
 
 	strcpy(tmp, Sedlbauer_revision);
 	printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
-	
- 	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
- 		cs->subtyp = SEDL_SPEED_CARD_WIN;
+
+	if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
+		cs->subtyp = SEDL_SPEED_CARD_WIN;
 		cs->hw.sedl.bus = SEDL_BUS_ISA;
 		cs->hw.sedl.chip = SEDL_CHIP_TEST;
- 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {	
- 		cs->subtyp = SEDL_SPEED_STAR;
+	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
+		cs->subtyp = SEDL_SPEED_STAR;
 		cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
 		cs->hw.sedl.chip = SEDL_CHIP_TEST;
- 	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {	
- 		cs->subtyp = SEDL_SPEED_FAX;
+	} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
+		cs->subtyp = SEDL_SPEED_FAX;
 		cs->hw.sedl.bus = SEDL_BUS_ISA;
 		cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
- 	} else
+	} else
 		return (0);
 
 	bytecnt = 8;
@@ -720,22 +720,22 @@ setup_sedlbauer(struct IsdnCard *card)
 			return (0);
 
 		bytecnt = 256;
-	}	
+	}
 
-ready:	
+ready:
 
 	/* In case of the sedlbauer pcmcia card, this region is in use,
 	 * reserved for us by the card manager. So we do not check it
 	 * here, it would fail.
 	 */
 	if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
-		!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
+	    !request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
 		printk(KERN_WARNING
-			"HiSax: %s config port %x-%x already in use\n",
-			CardType[card->typ],
-			cs->hw.sedl.cfg_reg,
-			cs->hw.sedl.cfg_reg + bytecnt);
-			return (0);
+		       "HiSax: %s config port %x-%x already in use\n",
+		       CardType[card->typ],
+		       cs->hw.sedl.cfg_reg,
+		       cs->hw.sedl.cfg_reg + bytecnt);
+		return (0);
 	}
 
 	printk(KERN_INFO
@@ -753,12 +753,12 @@ ready:
  * testing ISA and PCMCIA Cards for IPAC, default is ISAC
  * do not test for PCI card, because ports are different
  * and PCI card uses only IPAC (for the moment)
- */	
+ */
 	if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
 		val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
-			cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
+			      cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
 		printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
-	        if ((val == 1) || (val == 2)) {
+		if ((val == 1) || (val == 2)) {
 			/* IPAC */
 			cs->subtyp = SEDL_SPEED_WIN2_PC104;
 			if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
@@ -777,16 +777,16 @@ ready:
  * hw.sedl.chip is now properly set
  */
 	printk(KERN_INFO "Sedlbauer: %s detected\n",
-		Sedlbauer_Types[cs->subtyp]);
+	       Sedlbauer_Types[cs->subtyp]);
 
 	setup_isac(cs);
 	if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
 		if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
-	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
+			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
 			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
 			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
 		} else {
-	                cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
+			cs->hw.sedl.adr  = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
 			cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
 			cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
 		}
@@ -807,22 +807,22 @@ ready:
 		if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
 			if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
 				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ADR;
+					SEDL_ISAR_PCI_ADR;
 				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ISAC;
+					SEDL_ISAR_PCI_ISAC;
 				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_PCI_ISAR;
+					SEDL_ISAR_PCI_ISAR;
 			} else {
 				cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ADR;
+					SEDL_ISAR_ISA_ADR;
 				cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAC;
+					SEDL_ISAR_ISA_ISAC;
 				cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR;
+					SEDL_ISAR_ISA_ISAR;
 				cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR_RESET_ON;
+					SEDL_ISAR_ISA_ISAR_RESET_ON;
 				cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
-							SEDL_ISAR_ISA_ISAR_RESET_OFF;
+					SEDL_ISAR_ISA_ISAR_RESET_OFF;
 			}
 			cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
 			cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
@@ -838,7 +838,7 @@ ready:
 				ver = ISARVersion(cs, "Sedlbauer:");
 				if (ver < 0)
 					printk(KERN_WARNING
-						"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
+					       "Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
 				else
 					break;
 				reset_sedlbauer(cs);
@@ -865,10 +865,10 @@ ready:
 			}
 			cs->irq_func = &sedlbauer_interrupt;
 			ISACVersion(cs, "Sedlbauer:");
-		
+
 			if (HscxVersion(cs, "Sedlbauer:")) {
 				printk(KERN_WARNING
-					"Sedlbauer: wrong HSCX versions check IO address\n");
+				       "Sedlbauer: wrong HSCX versions check IO address\n");
 				release_io_sedlbauer(cs);
 				return (0);
 			}