Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 43 insertions, 41 deletions

diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 360f2b98f62..f351422938e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -208,11 +208,10 @@ static void __release_stripe(struct r5conf *conf, struct stripe_head *sh)
 			md_wakeup_thread(conf->mddev->thread);
 		} else {
 			BUG_ON(stripe_operations_active(sh));
-			if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
-				atomic_dec(&conf->preread_active_stripes);
-				if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD)
+			if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
+				if (atomic_dec_return(&conf->preread_active_stripes)
+				    < IO_THRESHOLD)
 					md_wakeup_thread(conf->mddev->thread);
-			}
 			atomic_dec(&conf->active_stripes);
 			if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
 				list_add_tail(&sh->lru, &conf->inactive_list);
@@ -2472,39 +2471,41 @@ handle_failed_sync(struct r5conf *conf, struct stripe_head *sh,
 	int abort = 0;
 	int i;
 
-	md_done_sync(conf->mddev, STRIPE_SECTORS, 0);
 	clear_bit(STRIPE_SYNCING, &sh->state);
 	s->syncing = 0;
 	s->replacing = 0;
 	/* There is nothing more to do for sync/check/repair.
+	 * Don't even need to abort as that is handled elsewhere
+	 * if needed, and not always wanted e.g. if there is a known
+	 * bad block here.
 	 * For recover/replace we need to record a bad block on all
 	 * non-sync devices, or abort the recovery
 	 */
-	if (!test_bit(MD_RECOVERY_RECOVER, &conf->mddev->recovery))
-		return;
-	/* During recovery devices cannot be removed, so locking and
-	 * refcounting of rdevs is not needed
-	 */
-	for (i = 0; i < conf->raid_disks; i++) {
-		struct md_rdev *rdev = conf->disks[i].rdev;
-		if (rdev
-		    && !test_bit(Faulty, &rdev->flags)
-		    && !test_bit(In_sync, &rdev->flags)
-		    && !rdev_set_badblocks(rdev, sh->sector,
-					   STRIPE_SECTORS, 0))
-			abort = 1;
-		rdev = conf->disks[i].replacement;
-		if (rdev
-		    && !test_bit(Faulty, &rdev->flags)
-		    && !test_bit(In_sync, &rdev->flags)
-		    && !rdev_set_badblocks(rdev, sh->sector,
-					   STRIPE_SECTORS, 0))
-			abort = 1;
-	}
-	if (abort) {
-		conf->recovery_disabled = conf->mddev->recovery_disabled;
-		set_bit(MD_RECOVERY_INTR, &conf->mddev->recovery);
+	if (test_bit(MD_RECOVERY_RECOVER, &conf->mddev->recovery)) {
+		/* During recovery devices cannot be removed, so
+		 * locking and refcounting of rdevs is not needed
+		 */
+		for (i = 0; i < conf->raid_disks; i++) {
+			struct md_rdev *rdev = conf->disks[i].rdev;
+			if (rdev
+			    && !test_bit(Faulty, &rdev->flags)
+			    && !test_bit(In_sync, &rdev->flags)
+			    && !rdev_set_badblocks(rdev, sh->sector,
+						   STRIPE_SECTORS, 0))
+				abort = 1;
+			rdev = conf->disks[i].replacement;
+			if (rdev
+			    && !test_bit(Faulty, &rdev->flags)
+			    && !test_bit(In_sync, &rdev->flags)
+			    && !rdev_set_badblocks(rdev, sh->sector,
+						   STRIPE_SECTORS, 0))
+				abort = 1;
+		}
+		if (abort)
+			conf->recovery_disabled =
+				conf->mddev->recovery_disabled;
 	}
+	md_done_sync(conf->mddev, STRIPE_SECTORS, !abort);
 }
 
 static int want_replace(struct stripe_head *sh, int disk_idx)
@@ -3204,7 +3205,8 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			/* Not in-sync */;
 		else if (is_bad) {
 			/* also not in-sync */
-			if (!test_bit(WriteErrorSeen, &rdev->flags)) {
+			if (!test_bit(WriteErrorSeen, &rdev->flags) &&
+			    test_bit(R5_UPTODATE, &dev->flags)) {
 				/* treat as in-sync, but with a read error
 				 * which we can now try to correct
 				 */
@@ -3277,12 +3279,14 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 		/* If there is a failed device being replaced,
 		 *     we must be recovering.
 		 * else if we are after recovery_cp, we must be syncing
+		 * else if MD_RECOVERY_REQUESTED is set, we also are syncing.
 		 * else we can only be replacing
 		 * sync and recovery both need to read all devices, and so
 		 * use the same flag.
 		 */
 		if (do_recovery ||
-		    sh->sector >= conf->mddev->recovery_cp)
+		    sh->sector >= conf->mddev->recovery_cp ||
+		    test_bit(MD_RECOVERY_REQUESTED, &(conf->mddev->recovery)))
 			s->syncing = 1;
 		else
 			s->replacing = 1;
@@ -4843,7 +4847,7 @@ static struct r5conf *setup_conf(struct mddev *mddev)
 
 	pr_debug("raid456: run(%s) called.\n", mdname(mddev));
 
-	list_for_each_entry(rdev, &mddev->disks, same_set) {
+	rdev_for_each(rdev, mddev) {
 		raid_disk = rdev->raid_disk;
 		if (raid_disk >= max_disks
 		    || raid_disk < 0)
@@ -5178,7 +5182,7 @@ static int run(struct mddev *mddev)
 		blk_queue_io_opt(mddev->queue, chunk_size *
 				 (conf->raid_disks - conf->max_degraded));
 
-		list_for_each_entry(rdev, &mddev->disks, same_set)
+		rdev_for_each(rdev, mddev)
 			disk_stack_limits(mddev->gendisk, rdev->bdev,
 					  rdev->data_offset << 9);
 	}
@@ -5362,7 +5366,7 @@ static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 	if (mddev->recovery_disabled == conf->recovery_disabled)
 		return -EBUSY;
 
-	if (has_failed(conf))
+	if (rdev->saved_raid_disk < 0 && has_failed(conf))
 		/* no point adding a device */
 		return -EINVAL;
 
@@ -5501,7 +5505,7 @@ static int raid5_start_reshape(struct mddev *mddev)
 	if (!check_stripe_cache(mddev))
 		return -ENOSPC;
 
-	list_for_each_entry(rdev, &mddev->disks, same_set)
+	rdev_for_each(rdev, mddev)
 		if (!test_bit(In_sync, &rdev->flags)
 		    && !test_bit(Faulty, &rdev->flags))
 			spares++;
@@ -5547,16 +5551,14 @@ static int raid5_start_reshape(struct mddev *mddev)
 	 * such devices during the reshape and confusion could result.
 	 */
 	if (mddev->delta_disks >= 0) {
-		int added_devices = 0;
-		list_for_each_entry(rdev, &mddev->disks, same_set)
+		rdev_for_each(rdev, mddev)
 			if (rdev->raid_disk < 0 &&
 			    !test_bit(Faulty, &rdev->flags)) {
 				if (raid5_add_disk(mddev, rdev) == 0) {
 					if (rdev->raid_disk
-					    >= conf->previous_raid_disks) {
+					    >= conf->previous_raid_disks)
 						set_bit(In_sync, &rdev->flags);
-						added_devices++;
-					} else
+					else
 						rdev->recovery_offset = 0;
 
 					if (sysfs_link_rdev(mddev, rdev))
@@ -5566,7 +5568,6 @@ static int raid5_start_reshape(struct mddev *mddev)
 				   && !test_bit(Faulty, &rdev->flags)) {
 				/* This is a spare that was manually added */
 				set_bit(In_sync, &rdev->flags);
-				added_devices++;
 			}
 
 		/* When a reshape changes the number of devices,
@@ -5592,6 +5593,7 @@ static int raid5_start_reshape(struct mddev *mddev)
 		spin_lock_irq(&conf->device_lock);
 		mddev->raid_disks = conf->raid_disks = conf->previous_raid_disks;
 		conf->reshape_progress = MaxSector;
+		mddev->reshape_position = MaxSector;
 		spin_unlock_irq(&conf->device_lock);
 		return -EAGAIN;
 	}