Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 "The main set of series of patches for media subsystem, including:
   - document RC sysfs class
   - added an API to setup scancode to allow waking up systems using the
     Remote Controller
   - add API for SDR devices.  Drivers are still on staging
   - some API improvements for getting EDID data from media
     inputs/outputs
   - new DVB frontend driver for drx-j (ATSC)
   - one driver (it913x/it9137) got removed, in favor of an improvement
     on another driver (af9035)
   - added a skeleton V4L2 PCI driver at documentation
   - added a dual flash driver (lm3646)
   - added a new IR driver (img-ir)
   - added an IR scancode decoder for the Sharp protocol
   - some improvements at the usbtv driver, to allow its core to be
     reused.
   - added a new SDR driver (rtl2832u_sdr)
   - added a new tuner driver (msi001)
   - several improvements at em28xx driver to fix PM support, device
     removal and to split the V4L2 specific bits into a separate
     sub-driver
   - one driver got converted to videobuf2 (s2255drv)
   - the e4000 tuner driver now follows an improved binding model
   - some fixes at V4L2 compat32 code
   - several fixes and enhancements at videobuf2 code
   - some cleanups at V4L2 API documentation
   - usual driver enhancements, new board additions and misc fixups"

[ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce
  indentation in of_graph_get_next_endpoint").

  The of_graph_get_next_endpoint() function was moved and renamed by
  commit fd9fdb78a9bf ("[media] of: move graph helpers from
  drivers/media/v4l2-core to drivers/of").  It was originally called
  v4l2_of_get_next_endpoint() and lived in the file
  drivers/media/v4l2-core/v4l2-of.c.

  In that original location, it was then fixed to support empty port
  nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port
  nodes"), and that commit clashes badly with the dropped "Reduce
  intendation" commit.  I had to choose one or the other, and decided
  that the "Support empty port nodes" commit was more important ]

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits)
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"
  [media] em28xx: fix PCTV 290e LNA oops
  [media] em28xx-dvb: fix PCTV 461e tuner I2C binding
  [media] m88ds3103: fix bug on .set_tone()
  [media] saa7134: fix WARN_ON during resume
  [media] v4l2-dv-timings: add module name, description, license
  [media] videodev2.h: add parenthesis around macro arguments
  [media] saa6752hs: depends on CRC32
  [media] si4713: fix Kconfig dependencies
  [media] Sensoray 2255 uses videobuf2
  [media] adv7180: free an interrupt on failure paths in init_device()
  [media] e4000: make VIDEO_V4L2 dependency optional
  [media] af9033: Don't export functions for the hardware filter
  [media] af9035: use af9033 PID filters
  [media] af9033: implement PID filter
  [media] rtl2832_sdr: do not use dynamic stack allocation
  [media] e4000: fix 32-bit build error
  [media] em28xx-audio: make sure audio is unmuted on open()
  [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format
  ...

1 files changed, 139 insertions, 0 deletions

diff --git a/drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h b/drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h
new file mode 100644
index 00000000000..5b5421f7038
--- /dev/null
+++ b/drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h
@@ -0,0 +1,139 @@
+/*
+  I2C API, implementation depends on board specifics
+
+  Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without
+  modification, are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+  * Redistributions in binary form must reproduce the above copyright notice,
+    this list of conditions and the following disclaimer in the documentation
+	and/or other materials provided with the distribution.
+  * Neither the name of Trident Microsystems nor Hauppauge Computer Works
+    nor the names of its contributors may be used to endorse or promote
+	products derived from this software without specific prior written
+	permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+  This module encapsulates I2C access.In some applications several devices
+  share one I2C bus. If these devices have the same I2C address some kind
+  off "switch" must be implemented to ensure error free communication with
+  one device.  In case such a "switch" is used, the device ID can be used
+  to implement control over this "switch".
+*/
+
+#ifndef __BSPI2C_H__
+#define __BSPI2C_H__
+
+#include "bsp_types.h"
+
+/*
+ * This structure contains the I2C address, the device ID and a user_data pointer.
+ * The user_data pointer can be used for application specific purposes.
+ */
+struct i2c_device_addr {
+	u16 i2c_addr;		/* The I2C address of the device. */
+	u16 i2c_dev_id;		/* The device identifier. */
+	void *user_data;		/* User data pointer */
+};
+
+
+/**
+* \def IS_I2C_10BIT( addr )
+* \brief Determine if I2C address 'addr' is a 10 bits address or not.
+* \param addr The I2C address.
+* \return int.
+* \retval 0 if address is not a 10 bits I2C address.
+* \retval 1 if address is a 10 bits I2C address.
+*/
+#define IS_I2C_10BIT(addr) \
+	 (((addr) & 0xF8) == 0xF0)
+
+/*------------------------------------------------------------------------------
+Exported FUNCTIONS
+------------------------------------------------------------------------------*/
+
+/**
+* \fn drxbsp_i2c_init()
+* \brief Initialize I2C communication module.
+* \return drx_status_t Return status.
+* \retval 0 Initialization successful.
+* \retval -EIO Initialization failed.
+*/
+	drx_status_t drxbsp_i2c_init(void);
+
+/**
+* \fn drxbsp_i2c_term()
+* \brief Terminate I2C communication module.
+* \return drx_status_t Return status.
+* \retval 0 Termination successful.
+* \retval -EIO Termination failed.
+*/
+	drx_status_t drxbsp_i2c_term(void);
+
+/**
+* \fn drx_status_t drxbsp_i2c_write_read( struct i2c_device_addr *w_dev_addr,
+*                                       u16 w_count,
+*                                       u8 *wData,
+*                                       struct i2c_device_addr *r_dev_addr,
+*                                       u16 r_count,
+*                                       u8 *r_data)
+* \brief Read and/or write count bytes from I2C bus, store them in data[].
+* \param w_dev_addr The device i2c address and the device ID to write to
+* \param w_count   The number of bytes to write
+* \param wData    The array to write the data to
+* \param r_dev_addr The device i2c address and the device ID to read from
+* \param r_count   The number of bytes to read
+* \param r_data    The array to read the data from
+* \return drx_status_t Return status.
+* \retval 0 Succes.
+* \retval -EIO Failure.
+* \retval -EINVAL Parameter 'wcount' is not zero but parameter
+*                                       'wdata' contains NULL.
+*                                       Idem for 'rcount' and 'rdata'.
+*                                       Both w_dev_addr and r_dev_addr are NULL.
+*
+* This function must implement an atomic write and/or read action on the I2C bus
+* No other process may use the I2C bus when this function is executing.
+* The critical section of this function runs from and including the I2C
+* write, up to and including the I2C read action.
+*
+* The device ID can be useful if several devices share an I2C address.
+* It can be used to control a "switch" on the I2C bus to the correct device.
+*/
+	drx_status_t drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,
+					 u16 w_count,
+					 u8 *w_data,
+					 struct i2c_device_addr *r_dev_addr,
+					 u16 r_count, u8 *r_data);
+
+/**
+* \fn drxbsp_i2c_error_text()
+* \brief Returns a human readable error.
+* Counter part of numerical drx_i2c_error_g.
+*
+* \return char* Pointer to human readable error text.
+*/
+	char *drxbsp_i2c_error_text(void);
+
+/**
+* \var drx_i2c_error_g;
+* \brief I2C specific error codes, platform dependent.
+*/
+	extern int drx_i2c_error_g;
+
+#endif				/* __BSPI2C_H__ */