[media] move the dvb/frontends to drivers/media/dvb-frontends

Raise the DVB frontends one level up, as the intention is to remove
the drivers/media/dvb directory.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 620 deletions

diff --git a/drivers/media/dvb/frontends/sp8870.c b/drivers/media/dvb/frontends/sp8870.c
deleted file mode 100644
index e37274c8f14..00000000000
--- a/drivers/media/dvb/frontends/sp8870.c
+++ /dev/null
@@ -1,620 +0,0 @@
-/*
-    Driver for Spase SP8870 demodulator
-
-    Copyright (C) 1999 Juergen Peitz
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
-*/
-/*
- * This driver needs external firmware. Please use the command
- * "<kerneldir>/Documentation/dvb/get_dvb_firmware alps_tdlb7" to
- * download/extract it, and then copy it to /usr/lib/hotplug/firmware
- * or /lib/firmware (depending on configuration of firmware hotplug).
- */
-#define SP8870_DEFAULT_FIRMWARE "dvb-fe-sp8870.fw"
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-
-#include "dvb_frontend.h"
-#include "sp8870.h"
-
-
-struct sp8870_state {
-
-	struct i2c_adapter* i2c;
-
-	const struct sp8870_config* config;
-
-	struct dvb_frontend frontend;
-
-	/* demodulator private data */
-	u8 initialised:1;
-};
-
-static int debug;
-#define dprintk(args...) \
-	do { \
-		if (debug) printk(KERN_DEBUG "sp8870: " args); \
-	} while (0)
-
-/* firmware size for sp8870 */
-#define SP8870_FIRMWARE_SIZE 16382
-
-/* starting point for firmware in file 'Sc_main.mc' */
-#define SP8870_FIRMWARE_OFFSET 0x0A
-
-static int sp8870_writereg (struct sp8870_state* state, u16 reg, u16 data)
-{
-	u8 buf [] = { reg >> 8, reg & 0xff, data >> 8, data & 0xff };
-	struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 4 };
-	int err;
-
-	if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-		dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __func__, err, reg, data);
-		return -EREMOTEIO;
-	}
-
-	return 0;
-}
-
-static int sp8870_readreg (struct sp8870_state* state, u16 reg)
-{
-	int ret;
-	u8 b0 [] = { reg >> 8 , reg & 0xff };
-	u8 b1 [] = { 0, 0 };
-	struct i2c_msg msg [] = { { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 2 },
-			   { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 2 } };
-
-	ret = i2c_transfer (state->i2c, msg, 2);
-
-	if (ret != 2) {
-		dprintk("%s: readreg error (ret == %i)\n", __func__, ret);
-		return -1;
-	}
-
-	return (b1[0] << 8 | b1[1]);
-}
-
-static int sp8870_firmware_upload (struct sp8870_state* state, const struct firmware *fw)
-{
-	struct i2c_msg msg;
-	const char *fw_buf = fw->data;
-	int fw_pos;
-	u8 tx_buf[255];
-	int tx_len;
-	int err = 0;
-
-	dprintk ("%s: ...\n", __func__);
-
-	if (fw->size < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET)
-		return -EINVAL;
-
-	// system controller stop
-	sp8870_writereg(state, 0x0F00, 0x0000);
-
-	// instruction RAM register hiword
-	sp8870_writereg(state, 0x8F08, ((SP8870_FIRMWARE_SIZE / 2) & 0xFFFF));
-
-	// instruction RAM MWR
-	sp8870_writereg(state, 0x8F0A, ((SP8870_FIRMWARE_SIZE / 2) >> 16));
-
-	// do firmware upload
-	fw_pos = SP8870_FIRMWARE_OFFSET;
-	while (fw_pos < SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET){
-		tx_len = (fw_pos <= SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - 252) ? 252 : SP8870_FIRMWARE_SIZE + SP8870_FIRMWARE_OFFSET - fw_pos;
-		// write register 0xCF0A
-		tx_buf[0] = 0xCF;
-		tx_buf[1] = 0x0A;
-		memcpy(&tx_buf[2], fw_buf + fw_pos, tx_len);
-		msg.addr = state->config->demod_address;
-		msg.flags = 0;
-		msg.buf = tx_buf;
-		msg.len = tx_len + 2;
-		if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
-			printk("%s: firmware upload failed!\n", __func__);
-			printk ("%s: i2c error (err == %i)\n", __func__, err);
-			return err;
-		}
-		fw_pos += tx_len;
-	}
-
-	dprintk ("%s: done!\n", __func__);
-	return 0;
-};
-
-static void sp8870_microcontroller_stop (struct sp8870_state* state)
-{
-	sp8870_writereg(state, 0x0F08, 0x000);
-	sp8870_writereg(state, 0x0F09, 0x000);
-
-	// microcontroller STOP
-	sp8870_writereg(state, 0x0F00, 0x000);
-}
-
-static void sp8870_microcontroller_start (struct sp8870_state* state)
-{
-	sp8870_writereg(state, 0x0F08, 0x000);
-	sp8870_writereg(state, 0x0F09, 0x000);
-
-	// microcontroller START
-	sp8870_writereg(state, 0x0F00, 0x001);
-	// not documented but if we don't read 0x0D01 out here
-	// we don't get a correct data valid signal
-	sp8870_readreg(state, 0x0D01);
-}
-
-static int sp8870_read_data_valid_signal(struct sp8870_state* state)
-{
-	return (sp8870_readreg(state, 0x0D02) > 0);
-}
-
-static int configure_reg0xc05 (struct dtv_frontend_properties *p, u16 *reg0xc05)
-{
-	int known_parameters = 1;
-
-	*reg0xc05 = 0x000;
-
-	switch (p->modulation) {
-	case QPSK:
-		break;
-	case QAM_16:
-		*reg0xc05 |= (1 << 10);
-		break;
-	case QAM_64:
-		*reg0xc05 |= (2 << 10);
-		break;
-	case QAM_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->hierarchy) {
-	case HIERARCHY_NONE:
-		break;
-	case HIERARCHY_1:
-		*reg0xc05 |= (1 << 7);
-		break;
-	case HIERARCHY_2:
-		*reg0xc05 |= (2 << 7);
-		break;
-	case HIERARCHY_4:
-		*reg0xc05 |= (3 << 7);
-		break;
-	case HIERARCHY_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	switch (p->code_rate_HP) {
-	case FEC_1_2:
-		break;
-	case FEC_2_3:
-		*reg0xc05 |= (1 << 3);
-		break;
-	case FEC_3_4:
-		*reg0xc05 |= (2 << 3);
-		break;
-	case FEC_5_6:
-		*reg0xc05 |= (3 << 3);
-		break;
-	case FEC_7_8:
-		*reg0xc05 |= (4 << 3);
-		break;
-	case FEC_AUTO:
-		known_parameters = 0;
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	if (known_parameters)
-		*reg0xc05 |= (2 << 1);	/* use specified parameters */
-	else
-		*reg0xc05 |= (1 << 1);	/* enable autoprobing */
-
-	return 0;
-}
-
-static int sp8870_wake_up(struct sp8870_state* state)
-{
-	// enable TS output and interface pins
-	return sp8870_writereg(state, 0xC18, 0x00D);
-}
-
-static int sp8870_set_frontend_parameters(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp8870_state* state = fe->demodulator_priv;
-	int  err;
-	u16 reg0xc05;
-
-	if ((err = configure_reg0xc05(p, &reg0xc05)))
-		return err;
-
-	// system controller stop
-	sp8870_microcontroller_stop(state);
-
-	// set tuner parameters
-	if (fe->ops.tuner_ops.set_params) {
-		fe->ops.tuner_ops.set_params(fe);
-		if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
-	}
-
-	// sample rate correction bit [23..17]
-	sp8870_writereg(state, 0x0319, 0x000A);
-
-	// sample rate correction bit [16..0]
-	sp8870_writereg(state, 0x031A, 0x0AAB);
-
-	// integer carrier offset
-	sp8870_writereg(state, 0x0309, 0x0400);
-
-	// fractional carrier offset
-	sp8870_writereg(state, 0x030A, 0x0000);
-
-	// filter for 6/7/8 Mhz channel
-	if (p->bandwidth_hz == 6000000)
-		sp8870_writereg(state, 0x0311, 0x0002);
-	else if (p->bandwidth_hz == 7000000)
-		sp8870_writereg(state, 0x0311, 0x0001);
-	else
-		sp8870_writereg(state, 0x0311, 0x0000);
-
-	// scan order: 2k first = 0x0000, 8k first = 0x0001
-	if (p->transmission_mode == TRANSMISSION_MODE_2K)
-		sp8870_writereg(state, 0x0338, 0x0000);
-	else
-		sp8870_writereg(state, 0x0338, 0x0001);
-
-	sp8870_writereg(state, 0xc05, reg0xc05);
-
-	// read status reg in order to clear pending irqs
-	sp8870_readreg(state, 0x200);
-
-	// system controller start
-	sp8870_microcontroller_start(state);
-
-	return 0;
-}
-
-static int sp8870_init (struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	const struct firmware *fw = NULL;
-
-	sp8870_wake_up(state);
-	if (state->initialised) return 0;
-	state->initialised = 1;
-
-	dprintk ("%s\n", __func__);
-
-
-	/* request the firmware, this will block until someone uploads it */
-	printk("sp8870: waiting for firmware upload (%s)...\n", SP8870_DEFAULT_FIRMWARE);
-	if (state->config->request_firmware(fe, &fw, SP8870_DEFAULT_FIRMWARE)) {
-		printk("sp8870: no firmware upload (timeout or file not found?)\n");
-		return -EIO;
-	}
-
-	if (sp8870_firmware_upload(state, fw)) {
-		printk("sp8870: writing firmware to device failed\n");
-		release_firmware(fw);
-		return -EIO;
-	}
-	release_firmware(fw);
-	printk("sp8870: firmware upload complete\n");
-
-	/* enable TS output and interface pins */
-	sp8870_writereg(state, 0xc18, 0x00d);
-
-	// system controller stop
-	sp8870_microcontroller_stop(state);
-
-	// ADC mode
-	sp8870_writereg(state, 0x0301, 0x0003);
-
-	// Reed Solomon parity bytes passed to output
-	sp8870_writereg(state, 0x0C13, 0x0001);
-
-	// MPEG clock is suppressed if no valid data
-	sp8870_writereg(state, 0x0C14, 0x0001);
-
-	/* bit 0x010: enable data valid signal */
-	sp8870_writereg(state, 0x0D00, 0x010);
-	sp8870_writereg(state, 0x0D01, 0x000);
-
-	return 0;
-}
-
-static int sp8870_read_status (struct dvb_frontend* fe, fe_status_t * fe_status)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int status;
-	int signal;
-
-	*fe_status = 0;
-
-	status = sp8870_readreg (state, 0x0200);
-	if (status < 0)
-		return -EIO;
-
-	signal = sp8870_readreg (state, 0x0303);
-	if (signal < 0)
-		return -EIO;
-
-	if (signal > 0x0F)
-		*fe_status |= FE_HAS_SIGNAL;
-	if (status & 0x08)
-		*fe_status |= FE_HAS_SYNC;
-	if (status & 0x04)
-		*fe_status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_VITERBI;
-
-	return 0;
-}
-
-static int sp8870_read_ber (struct dvb_frontend* fe, u32 * ber)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-	u32 tmp;
-
-	*ber = 0;
-
-	ret = sp8870_readreg(state, 0xC08);
-	if (ret < 0)
-		return -EIO;
-
-	tmp = ret & 0x3F;
-
-	ret = sp8870_readreg(state, 0xC07);
-	if (ret < 0)
-		return -EIO;
-
-	 tmp = ret << 6;
-
-	if (tmp >= 0x3FFF0)
-		tmp = ~0;
-
-	*ber = tmp;
-
-	return 0;
-}
-
-static int sp8870_read_signal_strength(struct dvb_frontend* fe,  u16 * signal)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-	u16 tmp;
-
-	*signal = 0;
-
-	ret = sp8870_readreg (state, 0x306);
-	if (ret < 0)
-		return -EIO;
-
-	tmp = ret << 8;
-
-	ret = sp8870_readreg (state, 0x303);
-	if (ret < 0)
-		return -EIO;
-
-	tmp |= ret;
-
-	if (tmp)
-		*signal = 0xFFFF - tmp;
-
-	return 0;
-}
-
-static int sp8870_read_uncorrected_blocks (struct dvb_frontend* fe, u32* ublocks)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	int ret;
-
-	*ublocks = 0;
-
-	ret = sp8870_readreg(state, 0xC0C);
-	if (ret < 0)
-		return -EIO;
-
-	if (ret == 0xFFFF)
-		ret = ~0;
-
-	*ublocks = ret;
-
-	return 0;
-}
-
-/* number of trials to recover from lockup */
-#define MAXTRIALS 5
-/* maximum checks for data valid signal */
-#define MAXCHECKS 100
-
-/* only for debugging: counter for detected lockups */
-static int lockups;
-/* only for debugging: counter for channel switches */
-static int switches;
-
-static int sp8870_set_frontend(struct dvb_frontend *fe)
-{
-	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	/*
-	    The firmware of the sp8870 sometimes locks up after setting frontend parameters.
-	    We try to detect this by checking the data valid signal.
-	    If it is not set after MAXCHECKS we try to recover the lockup by setting
-	    the frontend parameters again.
-	*/
-
-	int err = 0;
-	int valid = 0;
-	int trials = 0;
-	int check_count = 0;
-
-	dprintk("%s: frequency = %i\n", __func__, p->frequency);
-
-	for (trials = 1; trials <= MAXTRIALS; trials++) {
-
-		err = sp8870_set_frontend_parameters(fe);
-		if (err)
-			return err;
-
-		for (check_count = 0; check_count < MAXCHECKS; check_count++) {
-//			valid = ((sp8870_readreg(i2c, 0x0200) & 4) == 0);
-			valid = sp8870_read_data_valid_signal(state);
-			if (valid) {
-				dprintk("%s: delay = %i usec\n",
-					__func__, check_count * 10);
-				break;
-			}
-			udelay(10);
-		}
-		if (valid)
-			break;
-	}
-
-	if (!valid) {
-		printk("%s: firmware crash!!!!!!\n", __func__);
-		return -EIO;
-	}
-
-	if (debug) {
-		if (valid) {
-			if (trials > 1) {
-				printk("%s: firmware lockup!!!\n", __func__);
-				printk("%s: recovered after %i trial(s))\n",  __func__, trials - 1);
-				lockups++;
-			}
-		}
-		switches++;
-		printk("%s: switches = %i lockups = %i\n", __func__, switches, lockups);
-	}
-
-	return 0;
-}
-
-static int sp8870_sleep(struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	// tristate TS output and disable interface pins
-	return sp8870_writereg(state, 0xC18, 0x000);
-}
-
-static int sp8870_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings)
-{
-	fesettings->min_delay_ms = 350;
-	fesettings->step_size = 0;
-	fesettings->max_drift = 0;
-	return 0;
-}
-
-static int sp8870_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-
-	if (enable) {
-		return sp8870_writereg(state, 0x206, 0x001);
-	} else {
-		return sp8870_writereg(state, 0x206, 0x000);
-	}
-}
-
-static void sp8870_release(struct dvb_frontend* fe)
-{
-	struct sp8870_state* state = fe->demodulator_priv;
-	kfree(state);
-}
-
-static struct dvb_frontend_ops sp8870_ops;
-
-struct dvb_frontend* sp8870_attach(const struct sp8870_config* config,
-				   struct i2c_adapter* i2c)
-{
-	struct sp8870_state* state = NULL;
-
-	/* allocate memory for the internal state */
-	state = kzalloc(sizeof(struct sp8870_state), GFP_KERNEL);
-	if (state == NULL) goto error;
-
-	/* setup the state */
-	state->config = config;
-	state->i2c = i2c;
-	state->initialised = 0;
-
-	/* check if the demod is there */
-	if (sp8870_readreg(state, 0x0200) < 0) goto error;
-
-	/* create dvb_frontend */
-	memcpy(&state->frontend.ops, &sp8870_ops, sizeof(struct dvb_frontend_ops));
-	state->frontend.demodulator_priv = state;
-	return &state->frontend;
-
-error:
-	kfree(state);
-	return NULL;
-}
-
-static struct dvb_frontend_ops sp8870_ops = {
-	.delsys = { SYS_DVBT },
-	.info = {
-		.name			= "Spase SP8870 DVB-T",
-		.frequency_min		= 470000000,
-		.frequency_max		= 860000000,
-		.frequency_stepsize	= 166666,
-		.caps			= FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 |
-					  FE_CAN_FEC_3_4 | FE_CAN_FEC_5_6 |
-					  FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
-					  FE_CAN_QPSK | FE_CAN_QAM_16 |
-					  FE_CAN_QAM_64 | FE_CAN_QAM_AUTO |
-					  FE_CAN_HIERARCHY_AUTO |  FE_CAN_RECOVER
-	},
-
-	.release = sp8870_release,
-
-	.init = sp8870_init,
-	.sleep = sp8870_sleep,
-	.i2c_gate_ctrl = sp8870_i2c_gate_ctrl,
-
-	.set_frontend = sp8870_set_frontend,
-	.get_tune_settings = sp8870_get_tune_settings,
-
-	.read_status = sp8870_read_status,
-	.read_ber = sp8870_read_ber,
-	.read_signal_strength = sp8870_read_signal_strength,
-	.read_ucblocks = sp8870_read_uncorrected_blocks,
-};
-
-module_param(debug, int, 0644);
-MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
-
-MODULE_DESCRIPTION("Spase SP8870 DVB-T Demodulator driver");
-MODULE_AUTHOR("Juergen Peitz");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sp8870_attach);