[media] Rename all public generic RC functions from ir_ to rc_

Those functions are not InfraRed specific. So, rename them to properly
reflect it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

8 files changed, 32 insertions, 32 deletions

diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index b6ba3c7dc63..d67573edb05 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1146,14 +1146,14 @@ static u32 imon_remote_key_lookup(struct imon_context *ictx, u32 scancode)
 	bool is_release_code = false;
 
 	/* Look for the initial press of a button */
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 	ictx->rc_toggle = 0x0;
 	ictx->rc_scancode = scancode;
 
 	/* Look for the release of a button */
 	if (keycode == KEY_RESERVED) {
 		release = scancode & ~0x4000;
-		keycode = ir_g_keycode_from_table(ictx->rdev, release);
+		keycode = rc_g_keycode_from_table(ictx->rdev, release);
 		if (keycode != KEY_RESERVED)
 			is_release_code = true;
 	}
@@ -1182,7 +1182,7 @@ static u32 imon_mce_key_lookup(struct imon_context *ictx, u32 scancode)
 		scancode = scancode | MCE_KEY_MASK | MCE_TOGGLE_BIT;
 
 	ictx->rc_scancode = scancode;
-	keycode = ir_g_keycode_from_table(ictx->rdev, scancode);
+	keycode = rc_g_keycode_from_table(ictx->rdev, scancode);
 
 	/* not used in mce mode, but make sure we know its false */
 	ictx->release_code = false;
@@ -1564,9 +1564,9 @@ static void imon_incoming_packet(struct imon_context *ictx,
 
 	if (ktype != IMON_KEY_PANEL) {
 		if (press_type == 0)
-			ir_keyup(ictx->rdev);
+			rc_keyup(ictx->rdev);
 		else {
-			ir_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
+			rc_keydown(ictx->rdev, ictx->rc_scancode, ictx->rc_toggle);
 			spin_lock_irqsave(&ictx->kc_lock, flags);
 			ictx->last_keycode = ictx->kc;
 			spin_unlock_irqrestore(&ictx->kc_lock, flags);
diff --git a/drivers/media/rc/ir-jvc-decoder.c b/drivers/media/rc/ir-jvc-decoder.c
index cfe0e70440a..09c143ff33f 100644
--- a/drivers/media/rc/ir-jvc-decoder.c
+++ b/drivers/media/rc/ir-jvc-decoder.c
@@ -139,12 +139,12 @@ again:
 			scancode = (bitrev8((data->bits >> 8) & 0xff) << 8) |
 				   (bitrev8((data->bits >> 0) & 0xff) << 0);
 			IR_dprintk(1, "JVC scancode 0x%04x\n", scancode);
-			ir_keydown(dev, scancode, data->toggle);
+			rc_keydown(dev, scancode, data->toggle);
 			data->first = false;
 			data->old_bits = data->bits;
 		} else if (data->bits == data->old_bits) {
 			IR_dprintk(1, "JVC repeat\n");
-			ir_repeat(dev);
+			rc_repeat(dev);
 		} else {
 			IR_dprintk(1, "JVC invalid repeat msg\n");
 			break;
diff --git a/drivers/media/rc/ir-nec-decoder.c b/drivers/media/rc/ir-nec-decoder.c
index 8ff157a140c..235d774d0ec 100644
--- a/drivers/media/rc/ir-nec-decoder.c
+++ b/drivers/media/rc/ir-nec-decoder.c
@@ -88,7 +88,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			data->state = STATE_BIT_PULSE;
 			return 0;
 		} else if (eq_margin(ev.duration, NEC_REPEAT_SPACE, NEC_UNIT / 2)) {
-			ir_repeat(dev);
+			rc_repeat(dev);
 			IR_dprintk(1, "Repeat last key\n");
 			data->state = STATE_TRAILER_PULSE;
 			return 0;
@@ -114,7 +114,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 			geq_margin(ev.duration,
 			NEC_TRAILER_SPACE, NEC_UNIT / 2)) {
 				IR_dprintk(1, "Repeat last key\n");
-				ir_repeat(dev);
+				rc_repeat(dev);
 				data->state = STATE_INACTIVE;
 				return 0;
 
@@ -178,7 +178,7 @@ static int ir_nec_decode(struct rc_dev *dev, struct ir_raw_event ev)
 		if (data->is_nec_x)
 			data->necx_repeat = true;
 
-		ir_keydown(dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index dae6f9a9b66..779ab0d0a28 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -150,7 +150,7 @@ again:
 				   scancode, toggle);
 		}
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc5-sz-decoder.c b/drivers/media/rc/ir-rc5-sz-decoder.c
index d8a53c02c1e..5586bf20c8d 100644
--- a/drivers/media/rc/ir-rc5-sz-decoder.c
+++ b/drivers/media/rc/ir-rc5-sz-decoder.c
@@ -114,7 +114,7 @@ again:
 		IR_dprintk(1, "RC5-sz scancode 0x%04x (toggle: %u)\n",
 			   scancode, toggle);
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-rc6-decoder.c b/drivers/media/rc/ir-rc6-decoder.c
index 2435bbd1dbc..88d948728c2 100644
--- a/drivers/media/rc/ir-rc6-decoder.c
+++ b/drivers/media/rc/ir-rc6-decoder.c
@@ -242,7 +242,7 @@ again:
 			goto out;
 		}
 
-		ir_keydown(dev, scancode, toggle);
+		rc_keydown(dev, scancode, toggle);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/ir-sony-decoder.c b/drivers/media/rc/ir-sony-decoder.c
index 3138520fb9e..5292b89f8de 100644
--- a/drivers/media/rc/ir-sony-decoder.c
+++ b/drivers/media/rc/ir-sony-decoder.c
@@ -143,7 +143,7 @@ static int ir_sony_decode(struct rc_dev *dev, struct ir_raw_event ev)
 
 		scancode = device << 16 | subdevice << 8 | function;
 		IR_dprintk(1, "Sony(%u) scancode 0x%05x\n", data->count, scancode);
-		ir_keydown(dev, scancode, 0);
+		rc_keydown(dev, scancode, 0);
 		data->state = STATE_INACTIVE;
 		return 0;
 	}
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index d91b62cf132..11e2703ef1c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -481,7 +481,7 @@ out:
 }
 
 /**
- * ir_g_keycode_from_table() - gets the keycode that corresponds to a scancode
+ * rc_g_keycode_from_table() - gets the keycode that corresponds to a scancode
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:	the scancode to look for
  * @return:	the corresponding keycode, or KEY_RESERVED
@@ -490,7 +490,7 @@ out:
  * keycode. Normally it should not be used since drivers should have no
  * interest in keycodes.
  */
-u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
+u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 {
 	struct ir_scancode_table *rc_tab = &dev->rc_tab;
 	unsigned int keycode;
@@ -511,7 +511,7 @@ u32 ir_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
 
 	return keycode;
 }
-EXPORT_SYMBOL_GPL(ir_g_keycode_from_table);
+EXPORT_SYMBOL_GPL(rc_g_keycode_from_table);
 
 /**
  * ir_do_keyup() - internal function to signal the release of a keypress
@@ -532,13 +532,13 @@ static void ir_do_keyup(struct rc_dev *dev)
 }
 
 /**
- * ir_keyup() - signals the release of a keypress
+ * rc_keyup() - signals the release of a keypress
  * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used to signal that a key has been released on the
  * remote control.
  */
-void ir_keyup(struct rc_dev *dev)
+void rc_keyup(struct rc_dev *dev)
 {
 	unsigned long flags;
 
@@ -546,7 +546,7 @@ void ir_keyup(struct rc_dev *dev)
 	ir_do_keyup(dev);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keyup);
+EXPORT_SYMBOL_GPL(rc_keyup);
 
 /**
  * ir_timer_keyup() - generates a keyup event after a timeout
@@ -577,14 +577,14 @@ static void ir_timer_keyup(unsigned long cookie)
 }
 
 /**
- * ir_repeat() - signals that a key is still pressed
+ * rc_repeat() - signals that a key is still pressed
  * @dev:	the struct rc_dev descriptor of the device
  *
  * This routine is used by IR decoders when a repeat message which does
  * not include the necessary bits to reproduce the scancode has been
  * received.
  */
-void ir_repeat(struct rc_dev *dev)
+void rc_repeat(struct rc_dev *dev)
 {
 	unsigned long flags;
 
@@ -601,7 +601,7 @@ void ir_repeat(struct rc_dev *dev)
 out:
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_repeat);
+EXPORT_SYMBOL_GPL(rc_repeat);
 
 /**
  * ir_do_keydown() - internal function to process a keypress
@@ -643,7 +643,7 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
 }
 
 /**
- * ir_keydown() - generates input event for a key press
+ * rc_keydown() - generates input event for a key press
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
  * @toggle:     the toggle value (protocol dependent, if the protocol doesn't
@@ -652,10 +652,10 @@ static void ir_do_keydown(struct rc_dev *dev, int scancode,
  * This routine is used to signal that a key has been pressed on the
  * remote control.
  */
-void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
@@ -666,10 +666,10 @@ void ir_keydown(struct rc_dev *dev, int scancode, u8 toggle)
 	}
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keydown);
+EXPORT_SYMBOL_GPL(rc_keydown);
 
 /**
- * ir_keydown_notimeout() - generates input event for a key press without
+ * rc_keydown_notimeout() - generates input event for a key press without
  *                          an automatic keyup event at a later time
  * @dev:	the struct rc_dev descriptor of the device
  * @scancode:   the scancode that we're seeking
@@ -677,18 +677,18 @@ EXPORT_SYMBOL_GPL(ir_keydown);
  *              support toggle values, this should be set to zero)
  *
  * This routine is used to signal that a key has been pressed on the
- * remote control. The driver must manually call ir_keyup() at a later stage.
+ * remote control. The driver must manually call rc_keyup() at a later stage.
  */
-void ir_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
+void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle)
 {
 	unsigned long flags;
-	u32 keycode = ir_g_keycode_from_table(dev, scancode);
+	u32 keycode = rc_g_keycode_from_table(dev, scancode);
 
 	spin_lock_irqsave(&dev->keylock, flags);
 	ir_do_keydown(dev, scancode, keycode, toggle);
 	spin_unlock_irqrestore(&dev->keylock, flags);
 }
-EXPORT_SYMBOL_GPL(ir_keydown_notimeout);
+EXPORT_SYMBOL_GPL(rc_keydown_notimeout);
 
 static int ir_open(struct input_dev *idev)
 {