Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

4 files changed, 42 insertions, 15 deletions

diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index 81ba9d9d1b5..23f7fd22f0e 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -6,7 +6,8 @@ config VIDEO_AU0828
 	select I2C_ALGOBIT
 	select VIDEO_TVEEPROM
 	select VIDEOBUF_VMALLOC
-	select DVB_AU8522 if !DVB_FE_CUSTOMISE
+	select DVB_AU8522_DTV if !DVB_FE_CUSTOMISE
+	select DVB_AU8522_V4L if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_MXL5007T if !MEDIA_TUNER_CUSTOMISE
 	select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c
index 1c6015a04f9..e3fe9a6637f 100644
--- a/drivers/media/video/au0828/au0828-cards.c
+++ b/drivers/media/video/au0828/au0828-cards.c
@@ -325,6 +325,8 @@ struct usb_device_id au0828_usb_id_table[] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ USB_DEVICE(0x2040, 0x7281),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
+	{ USB_DEVICE(0x05e1, 0x0480),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 	{ USB_DEVICE(0x2040, 0x8200),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
 	{ USB_DEVICE(0x2040, 0x7260),
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 518216743c9..39ece8e2498 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -25,6 +25,7 @@
 #include <linux/device.h>
 #include <linux/suspend.h>
 #include <media/v4l2-common.h>
+#include <media/tuner.h>
 
 #include "au0828.h"
 #include "au8522.h"
@@ -79,9 +80,16 @@ static struct au8522_config hauppauge_woodbury_config = {
 	.vsb_if        = AU8522_IF_3_25MHZ,
 };
 
-static struct xc5000_config hauppauge_hvr950q_tunerconfig = {
+static struct xc5000_config hauppauge_xc5000a_config = {
 	.i2c_address      = 0x61,
 	.if_khz           = 6000,
+	.chip_id          = XC5000A,
+};
+
+static struct xc5000_config hauppauge_xc5000c_config = {
+	.i2c_address      = 0x61,
+	.if_khz           = 6000,
+	.chip_id          = XC5000C,
 };
 
 static struct mxl5007t_config mxl5007t_hvr950q_config = {
@@ -383,8 +391,19 @@ int au0828_dvb_register(struct au0828_dev *dev)
 				&hauppauge_hvr950q_config,
 				&dev->i2c_adap);
 		if (dvb->frontend != NULL)
-			dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap,
-				   &hauppauge_hvr950q_tunerconfig);
+			switch (dev->board.tuner_type) {
+			default:
+			case TUNER_XC5000:
+				dvb_attach(xc5000_attach, dvb->frontend,
+					   &dev->i2c_adap,
+					   &hauppauge_xc5000a_config);
+				break;
+			case TUNER_XC5000C:
+				dvb_attach(xc5000_attach, dvb->frontend,
+					   &dev->i2c_adap,
+					   &hauppauge_xc5000c_config);
+				break;
+			}
 		break;
 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
 		dvb->frontend = dvb_attach(au8522_attach,
@@ -411,7 +430,7 @@ int au0828_dvb_register(struct au0828_dev *dev)
 		if (dvb->frontend != NULL) {
 			dvb_attach(xc5000_attach, dvb->frontend,
 				&dev->i2c_adap,
-				&hauppauge_hvr950q_tunerconfig);
+				&hauppauge_xc5000a_config);
 		}
 		break;
 	default:
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 0b3e481ffe8..ac3dd733ab8 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -120,7 +120,7 @@ static void au0828_irq_callback(struct urb *urb)
 	struct au0828_dmaqueue  *dma_q = urb->context;
 	struct au0828_dev *dev = container_of(dma_q, struct au0828_dev, vidq);
 	unsigned long flags = 0;
-	int rc, i;
+	int i;
 
 	switch (urb->status) {
 	case 0:             /* success */
@@ -138,7 +138,7 @@ static void au0828_irq_callback(struct urb *urb)
 
 	/* Copy data from URB */
 	spin_lock_irqsave(&dev->slock, flags);
-	rc = dev->isoc_ctl.isoc_copy(dev, urb);
+	dev->isoc_ctl.isoc_copy(dev, urb);
 	spin_unlock_irqrestore(&dev->slock, flags);
 
 	/* Reset urb buffers */
@@ -1881,7 +1881,7 @@ int au0828_analog_register(struct au0828_dev *dev,
 	int retval = -ENOMEM;
 	struct usb_host_interface *iface_desc;
 	struct usb_endpoint_descriptor *endpoint;
-	int i;
+	int i, ret;
 
 	dprintk(1, "au0828_analog_register called!\n");
 
@@ -1951,8 +1951,8 @@ int au0828_analog_register(struct au0828_dev *dev,
 	dev->vbi_dev = video_device_alloc();
 	if (NULL == dev->vbi_dev) {
 		dprintk(1, "Can't allocate vbi_device.\n");
-		kfree(dev->vdev);
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto err_vdev;
 	}
 
 	/* Fill the video capture device struct */
@@ -1971,8 +1971,8 @@ int au0828_analog_register(struct au0828_dev *dev,
 	if (retval != 0) {
 		dprintk(1, "unable to register video device (error = %d).\n",
 			retval);
-		video_device_release(dev->vdev);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_vbi_dev;
 	}
 
 	/* Register the vbi device */
@@ -1981,13 +1981,18 @@ int au0828_analog_register(struct au0828_dev *dev,
 	if (retval != 0) {
 		dprintk(1, "unable to register vbi device (error = %d).\n",
 			retval);
-		video_device_release(dev->vbi_dev);
-		video_device_release(dev->vdev);
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_vbi_dev;
 	}
 
 	dprintk(1, "%s completed!\n", __func__);
 
 	return 0;
+
+err_vbi_dev:
+	video_device_release(dev->vbi_dev);
+err_vdev:
+	video_device_release(dev->vdev);
+	return ret;
 }