Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

1 files changed, 34 insertions, 16 deletions

diff --git a/drivers/media/video/videobuf2-core.c b/drivers/media/video/videobuf2-core.c
index 2e8f1df775b..9d4e9edbd2e 100644
--- a/drivers/media/video/videobuf2-core.c
+++ b/drivers/media/video/videobuf2-core.c
@@ -19,6 +19,9 @@
 #include <linux/slab.h>
 #include <linux/sched.h>
 
+#include <media/v4l2-dev.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-event.h>
 #include <media/videobuf2-core.h>
 
 static int debug;
@@ -1642,32 +1645,46 @@ static int __vb2_cleanup_fileio(struct vb2_queue *q);
  * For OUTPUT queues, if a buffer is ready to be dequeued, the file descriptor
  * will be reported as available for writing.
  *
+ * If the driver uses struct v4l2_fh, then vb2_poll() will also check for any
+ * pending events.
+ *
  * The return values from this function are intended to be directly returned
  * from poll handler in driver.
  */
 unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 {
-	unsigned long flags;
-	unsigned int ret;
+	struct video_device *vfd = video_devdata(file);
+	unsigned long req_events = poll_requested_events(wait);
 	struct vb2_buffer *vb = NULL;
+	unsigned int res = 0;
+	unsigned long flags;
+
+	if (test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags)) {
+		struct v4l2_fh *fh = file->private_data;
+
+		if (v4l2_event_pending(fh))
+			res = POLLPRI;
+		else if (req_events & POLLPRI)
+			poll_wait(file, &fh->wait, wait);
+	}
 
 	/*
 	 * Start file I/O emulator only if streaming API has not been used yet.
 	 */
 	if (q->num_buffers == 0 && q->fileio == NULL) {
-		if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ)) {
-			ret = __vb2_init_fileio(q, 1);
-			if (ret)
-				return POLLERR;
+		if (!V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_READ) &&
+				(req_events & (POLLIN | POLLRDNORM))) {
+			if (__vb2_init_fileio(q, 1))
+				return res | POLLERR;
 		}
-		if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE)) {
-			ret = __vb2_init_fileio(q, 0);
-			if (ret)
-				return POLLERR;
+		if (V4L2_TYPE_IS_OUTPUT(q->type) && (q->io_modes & VB2_WRITE) &&
+				(req_events & (POLLOUT | POLLWRNORM))) {
+			if (__vb2_init_fileio(q, 0))
+				return res | POLLERR;
 			/*
 			 * Write to OUTPUT queue can be done immediately.
 			 */
-			return POLLOUT | POLLWRNORM;
+			return res | POLLOUT | POLLWRNORM;
 		}
 	}
 
@@ -1675,7 +1692,7 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 	 * There is nothing to wait for if no buffers have already been queued.
 	 */
 	if (list_empty(&q->queued_list))
-		return POLLERR;
+		return res | POLLERR;
 
 	poll_wait(file, &q->done_wq, wait);
 
@@ -1690,10 +1707,11 @@ unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait)
 
 	if (vb && (vb->state == VB2_BUF_STATE_DONE
 			|| vb->state == VB2_BUF_STATE_ERROR)) {
-		return (V4L2_TYPE_IS_OUTPUT(q->type)) ? POLLOUT | POLLWRNORM :
-			POLLIN | POLLRDNORM;
+		return (V4L2_TYPE_IS_OUTPUT(q->type)) ?
+				res | POLLOUT | POLLWRNORM :
+				res | POLLIN | POLLRDNORM;
 	}
-	return 0;
+	return res;
 }
 EXPORT_SYMBOL_GPL(vb2_poll);
 
@@ -1839,7 +1857,6 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
 	 * (multiplane buffers are not supported).
 	 */
 	if (q->bufs[0]->num_planes != 1) {
-		fileio->req.count = 0;
 		ret = -EBUSY;
 		goto err_reqbufs;
 	}
@@ -1886,6 +1903,7 @@ static int __vb2_init_fileio(struct vb2_queue *q, int read)
 	return ret;
 
 err_reqbufs:
+	fileio->req.count = 0;
 	vb2_reqbufs(q, &fileio->req);
 
 err_kfree: