summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core
diff options
context:
space:
mode:
authorAdrian Hunter <adrian.hunter@nokia.com>2010-08-11 14:17:46 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2010-08-12 08:43:30 -0700
commitdfe86cba7676d58db8de7e623f5e72f1b0d3ca35 (patch)
treeed7e6a267c50e0ba2374dc6895515d7a100961a3 /drivers/mmc/core
parent81d73a32d775ae9674ea6edf0b5b721fc3bc57d9 (diff)
mmc: add erase, secure erase, trim and secure trim operations
SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/mmc/core')
-rw-r--r--drivers/mmc/core/core.c346
-rw-r--r--drivers/mmc/core/core.h2
-rw-r--r--drivers/mmc/core/mmc.c47
-rw-r--r--drivers/mmc/core/sd.c82
-rw-r--r--drivers/mmc/core/sd_ops.c48
-rw-r--r--drivers/mmc/core/sd_ops.h1
6 files changed, 525 insertions, 1 deletions
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 83240faa1dc..5db49b124ff 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1050,6 +1050,352 @@ void mmc_detect_change(struct mmc_host *host, unsigned long delay)
EXPORT_SYMBOL(mmc_detect_change);
+void mmc_init_erase(struct mmc_card *card)
+{
+ unsigned int sz;
+
+ if (is_power_of_2(card->erase_size))
+ card->erase_shift = ffs(card->erase_size) - 1;
+ else
+ card->erase_shift = 0;
+
+ /*
+ * It is possible to erase an arbitrarily large area of an SD or MMC
+ * card. That is not desirable because it can take a long time
+ * (minutes) potentially delaying more important I/O, and also the
+ * timeout calculations become increasingly hugely over-estimated.
+ * Consequently, 'pref_erase' is defined as a guide to limit erases
+ * to that size and alignment.
+ *
+ * For SD cards that define Allocation Unit size, limit erases to one
+ * Allocation Unit at a time. For MMC cards that define High Capacity
+ * Erase Size, whether it is switched on or not, limit to that size.
+ * Otherwise just have a stab at a good value. For modern cards it
+ * will end up being 4MiB. Note that if the value is too small, it
+ * can end up taking longer to erase.
+ */
+ if (mmc_card_sd(card) && card->ssr.au) {
+ card->pref_erase = card->ssr.au;
+ card->erase_shift = ffs(card->ssr.au) - 1;
+ } else if (card->ext_csd.hc_erase_size) {
+ card->pref_erase = card->ext_csd.hc_erase_size;
+ } else {
+ sz = (card->csd.capacity << (card->csd.read_blkbits - 9)) >> 11;
+ if (sz < 128)
+ card->pref_erase = 512 * 1024 / 512;
+ else if (sz < 512)
+ card->pref_erase = 1024 * 1024 / 512;
+ else if (sz < 1024)
+ card->pref_erase = 2 * 1024 * 1024 / 512;
+ else
+ card->pref_erase = 4 * 1024 * 1024 / 512;
+ if (card->pref_erase < card->erase_size)
+ card->pref_erase = card->erase_size;
+ else {
+ sz = card->pref_erase % card->erase_size;
+ if (sz)
+ card->pref_erase += card->erase_size - sz;
+ }
+ }
+}
+
+static void mmc_set_mmc_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd,
+ unsigned int arg, unsigned int qty)
+{
+ unsigned int erase_timeout;
+
+ if (card->ext_csd.erase_group_def & 1) {
+ /* High Capacity Erase Group Size uses HC timeouts */
+ if (arg == MMC_TRIM_ARG)
+ erase_timeout = card->ext_csd.trim_timeout;
+ else
+ erase_timeout = card->ext_csd.hc_erase_timeout;
+ } else {
+ /* CSD Erase Group Size uses write timeout */
+ unsigned int mult = (10 << card->csd.r2w_factor);
+ unsigned int timeout_clks = card->csd.tacc_clks * mult;
+ unsigned int timeout_us;
+
+ /* Avoid overflow: e.g. tacc_ns=80000000 mult=1280 */
+ if (card->csd.tacc_ns < 1000000)
+ timeout_us = (card->csd.tacc_ns * mult) / 1000;
+ else
+ timeout_us = (card->csd.tacc_ns / 1000) * mult;
+
+ /*
+ * ios.clock is only a target. The real clock rate might be
+ * less but not that much less, so fudge it by multiplying by 2.
+ */
+ timeout_clks <<= 1;
+ timeout_us += (timeout_clks * 1000) /
+ (card->host->ios.clock / 1000);
+
+ erase_timeout = timeout_us / 1000;
+
+ /*
+ * Theoretically, the calculation could underflow so round up
+ * to 1ms in that case.
+ */
+ if (!erase_timeout)
+ erase_timeout = 1;
+ }
+
+ /* Multiplier for secure operations */
+ if (arg & MMC_SECURE_ARGS) {
+ if (arg == MMC_SECURE_ERASE_ARG)
+ erase_timeout *= card->ext_csd.sec_erase_mult;
+ else
+ erase_timeout *= card->ext_csd.sec_trim_mult;
+ }
+
+ erase_timeout *= qty;
+
+ /*
+ * Ensure at least a 1 second timeout for SPI as per
+ * 'mmc_set_data_timeout()'
+ */
+ if (mmc_host_is_spi(card->host) && erase_timeout < 1000)
+ erase_timeout = 1000;
+
+ cmd->erase_timeout = erase_timeout;
+}
+
+static void mmc_set_sd_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (card->ssr.erase_timeout) {
+ /* Erase timeout specified in SD Status Register (SSR) */
+ cmd->erase_timeout = card->ssr.erase_timeout * qty +
+ card->ssr.erase_offset;
+ } else {
+ /*
+ * Erase timeout not specified in SD Status Register (SSR) so
+ * use 250ms per write block.
+ */
+ cmd->erase_timeout = 250 * qty;
+ }
+
+ /* Must not be less than 1 second */
+ if (cmd->erase_timeout < 1000)
+ cmd->erase_timeout = 1000;
+}
+
+static void mmc_set_erase_timeout(struct mmc_card *card,
+ struct mmc_command *cmd, unsigned int arg,
+ unsigned int qty)
+{
+ if (mmc_card_sd(card))
+ mmc_set_sd_erase_timeout(card, cmd, arg, qty);
+ else
+ mmc_set_mmc_erase_timeout(card, cmd, arg, qty);
+}
+
+static int mmc_do_erase(struct mmc_card *card, unsigned int from,
+ unsigned int to, unsigned int arg)
+{
+ struct mmc_command cmd;
+ unsigned int qty = 0;
+ int err;
+
+ /*
+ * qty is used to calculate the erase timeout which depends on how many
+ * erase groups (or allocation units in SD terminology) are affected.
+ * We count erasing part of an erase group as one erase group.
+ * For SD, the allocation units are always a power of 2. For MMC, the
+ * erase group size is almost certainly also power of 2, but it does not
+ * seem to insist on that in the JEDEC standard, so we fall back to
+ * division in that case. SD may not specify an allocation unit size,
+ * in which case the timeout is based on the number of write blocks.
+ *
+ * Note that the timeout for secure trim 2 will only be correct if the
+ * number of erase groups specified is the same as the total of all
+ * preceding secure trim 1 commands. Since the power may have been
+ * lost since the secure trim 1 commands occurred, it is generally
+ * impossible to calculate the secure trim 2 timeout correctly.
+ */
+ if (card->erase_shift)
+ qty += ((to >> card->erase_shift) -
+ (from >> card->erase_shift)) + 1;
+ else if (mmc_card_sd(card))
+ qty += to - from + 1;
+ else
+ qty += ((to / card->erase_size) -
+ (from / card->erase_size)) + 1;
+
+ if (!mmc_card_blockaddr(card)) {
+ from <<= 9;
+ to <<= 9;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_START;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_START;
+ cmd.arg = from;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group start error %d, "
+ "status %#x\n", err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ if (mmc_card_sd(card))
+ cmd.opcode = SD_ERASE_WR_BLK_END;
+ else
+ cmd.opcode = MMC_ERASE_GROUP_END;
+ cmd.arg = to;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: group end error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EINVAL;
+ goto out;
+ }
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_ERASE;
+ cmd.arg = arg;
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ mmc_set_erase_timeout(card, &cmd, arg, qty);
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err) {
+ printk(KERN_ERR "mmc_erase: erase error %d, status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+
+ if (mmc_host_is_spi(card->host))
+ goto out;
+
+ do {
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ /* Do not retry else we can't see errors */
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err || (cmd.resp[0] & 0xFDF92000)) {
+ printk(KERN_ERR "error %d requesting status %#x\n",
+ err, cmd.resp[0]);
+ err = -EIO;
+ goto out;
+ }
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA) ||
+ R1_CURRENT_STATE(cmd.resp[0]) == 7);
+out:
+ return err;
+}
+
+/**
+ * mmc_erase - erase sectors.
+ * @card: card to erase
+ * @from: first sector to erase
+ * @nr: number of sectors to erase
+ * @arg: erase command argument (SD supports only %MMC_ERASE_ARG)
+ *
+ * Caller must claim host before calling this function.
+ */
+int mmc_erase(struct mmc_card *card, unsigned int from, unsigned int nr,
+ unsigned int arg)
+{
+ unsigned int rem, to = from + nr;
+
+ if (!(card->host->caps & MMC_CAP_ERASE) ||
+ !(card->csd.cmdclass & CCC_ERASE))
+ return -EOPNOTSUPP;
+
+ if (!card->erase_size)
+ return -EOPNOTSUPP;
+
+ if (mmc_card_sd(card) && arg != MMC_ERASE_ARG)
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_SECURE_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN))
+ return -EOPNOTSUPP;
+
+ if ((arg & MMC_TRIM_ARGS) &&
+ !(card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN))
+ return -EOPNOTSUPP;
+
+ if (arg == MMC_SECURE_ERASE_ARG) {
+ if (from % card->erase_size || nr % card->erase_size)
+ return -EINVAL;
+ }
+
+ if (arg == MMC_ERASE_ARG) {
+ rem = from % card->erase_size;
+ if (rem) {
+ rem = card->erase_size - rem;
+ from += rem;
+ if (nr > rem)
+ nr -= rem;
+ else
+ return 0;
+ }
+ rem = nr % card->erase_size;
+ if (rem)
+ nr -= rem;
+ }
+
+ if (nr == 0)
+ return 0;
+
+ to = from + nr;
+
+ if (to <= from)
+ return -EINVAL;
+
+ /* 'from' and 'to' are inclusive */
+ to -= 1;
+
+ return mmc_do_erase(card, from, to, arg);
+}
+EXPORT_SYMBOL(mmc_erase);
+
+int mmc_can_erase(struct mmc_card *card)
+{
+ if ((card->host->caps & MMC_CAP_ERASE) &&
+ (card->csd.cmdclass & CCC_ERASE) && card->erase_size)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_erase);
+
+int mmc_can_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_GB_CL_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_trim);
+
+int mmc_can_secure_erase_trim(struct mmc_card *card)
+{
+ if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN)
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(mmc_can_secure_erase_trim);
+
+int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from,
+ unsigned int nr)
+{
+ if (!card->erase_size)
+ return 0;
+ if (from % card->erase_size || nr % card->erase_size)
+ return 0;
+ return 1;
+}
+EXPORT_SYMBOL(mmc_erase_group_aligned);
void mmc_rescan(struct work_struct *work)
{
diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h
index a811c52a165..9d9eef50e5d 100644
--- a/drivers/mmc/core/core.h
+++ b/drivers/mmc/core/core.h
@@ -29,6 +29,8 @@ struct mmc_bus_ops {
void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops);
void mmc_detach_bus(struct mmc_host *host);
+void mmc_init_erase(struct mmc_card *card);
+
void mmc_set_chip_select(struct mmc_host *host, int mode);
void mmc_set_clock(struct mmc_host *host, unsigned int hz);
void mmc_set_bus_mode(struct mmc_host *host, unsigned int mode);
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index ccba3869c02..6909a54c39b 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -108,13 +108,23 @@ static int mmc_decode_cid(struct mmc_card *card)
return 0;
}
+static void mmc_set_erase_size(struct mmc_card *card)
+{
+ if (card->ext_csd.erase_group_def & 1)
+ card->erase_size = card->ext_csd.hc_erase_size;
+ else
+ card->erase_size = card->csd.erase_size;
+
+ mmc_init_erase(card);
+}
+
/*
* Given a 128-bit response, decode to our card CSD structure.
*/
static int mmc_decode_csd(struct mmc_card *card)
{
struct mmc_csd *csd = &card->csd;
- unsigned int e, m;
+ unsigned int e, m, a, b;
u32 *resp = card->raw_csd;
/*
@@ -152,6 +162,13 @@ static int mmc_decode_csd(struct mmc_card *card)
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+ if (csd->write_blkbits >= 9) {
+ a = UNSTUFF_BITS(resp, 42, 5);
+ b = UNSTUFF_BITS(resp, 37, 5);
+ csd->erase_size = (a + 1) * (b + 1);
+ csd->erase_size <<= csd->write_blkbits - 9;
+ }
+
return 0;
}
@@ -261,8 +278,30 @@ static int mmc_read_ext_csd(struct mmc_card *card)
if (sa_shift > 0 && sa_shift <= 0x17)
card->ext_csd.sa_timeout =
1 << ext_csd[EXT_CSD_S_A_TIMEOUT];
+ card->ext_csd.erase_group_def =
+ ext_csd[EXT_CSD_ERASE_GROUP_DEF];
+ card->ext_csd.hc_erase_timeout = 300 *
+ ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
+ card->ext_csd.hc_erase_size =
+ ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10;
+ }
+
+ if (card->ext_csd.rev >= 4) {
+ card->ext_csd.sec_trim_mult =
+ ext_csd[EXT_CSD_SEC_TRIM_MULT];
+ card->ext_csd.sec_erase_mult =
+ ext_csd[EXT_CSD_SEC_ERASE_MULT];
+ card->ext_csd.sec_feature_support =
+ ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
+ card->ext_csd.trim_timeout = 300 *
+ ext_csd[EXT_CSD_TRIM_MULT];
}
+ if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
+ card->erased_byte = 0xFF;
+ else
+ card->erased_byte = 0x0;
+
out:
kfree(ext_csd);
@@ -274,6 +313,8 @@ MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
+MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
@@ -285,6 +326,8 @@ static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
&dev_attr_date.attr,
+ &dev_attr_erase_size.attr,
+ &dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
@@ -421,6 +464,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_read_ext_csd(card);
if (err)
goto free_card;
+ /* Erase size depends on CSD and Extended CSD */
+ mmc_set_erase_size(card);
}
/*
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index e6d7d9fab44..0f524108555 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -119,6 +119,13 @@ static int mmc_decode_csd(struct mmc_card *card)
csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+
+ if (UNSTUFF_BITS(resp, 46, 1)) {
+ csd->erase_size = 1;
+ } else if (csd->write_blkbits >= 9) {
+ csd->erase_size = UNSTUFF_BITS(resp, 39, 7) + 1;
+ csd->erase_size <<= csd->write_blkbits - 9;
+ }
break;
case 1:
/*
@@ -147,6 +154,7 @@ static int mmc_decode_csd(struct mmc_card *card)
csd->r2w_factor = 4; /* Unused */
csd->write_blkbits = 9;
csd->write_partial = 0;
+ csd->erase_size = 1;
break;
default:
printk(KERN_ERR "%s: unrecognised CSD structure version %d\n",
@@ -154,6 +162,8 @@ static int mmc_decode_csd(struct mmc_card *card)
return -EINVAL;
}
+ card->erase_size = csd->erase_size;
+
return 0;
}
@@ -179,10 +189,68 @@ static int mmc_decode_scr(struct mmc_card *card)
scr->sda_vsn = UNSTUFF_BITS(resp, 56, 4);
scr->bus_widths = UNSTUFF_BITS(resp, 48, 4);
+ if (UNSTUFF_BITS(resp, 55, 1))
+ card->erased_byte = 0xFF;
+ else
+ card->erased_byte = 0x0;
+
return 0;
}
/*
+ * Fetch and process SD Status register.
+ */
+static int mmc_read_ssr(struct mmc_card *card)
+{
+ unsigned int au, es, et, eo;
+ int err, i;
+ u32 *ssr;
+
+ if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
+ printk(KERN_WARNING "%s: card lacks mandatory SD Status "
+ "function.\n", mmc_hostname(card->host));
+ return 0;
+ }
+
+ ssr = kmalloc(64, GFP_KERNEL);
+ if (!ssr)
+ return -ENOMEM;
+
+ err = mmc_app_sd_status(card, ssr);
+ if (err) {
+ printk(KERN_WARNING "%s: problem reading SD Status "
+ "register.\n", mmc_hostname(card->host));
+ err = 0;
+ goto out;
+ }
+
+ for (i = 0; i < 16; i++)
+ ssr[i] = be32_to_cpu(ssr[i]);
+
+ /*
+ * UNSTUFF_BITS only works with four u32s so we have to offset the
+ * bitfield positions accordingly.
+ */
+ au = UNSTUFF_BITS(ssr, 428 - 384, 4);
+ if (au > 0 || au <= 9) {
+ card->ssr.au = 1 << (au + 4);
+ es = UNSTUFF_BITS(ssr, 408 - 384, 16);
+ et = UNSTUFF_BITS(ssr, 402 - 384, 6);
+ eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
+ if (es && et) {
+ card->ssr.erase_timeout = (et * 1000) / es;
+ card->ssr.erase_offset = eo * 1000;
+ }
+ } else {
+ printk(KERN_WARNING "%s: SD Status: Invalid Allocation Unit "
+ "size.\n", mmc_hostname(card->host));
+ }
+out:
+ kfree(ssr);
+ return err;
+}
+
+/*
* Fetches and decodes switch information
*/
static int mmc_read_switch(struct mmc_card *card)
@@ -289,6 +357,8 @@ MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(scr, "%08x%08x\n", card->raw_scr[0], card->raw_scr[1]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
+MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
+MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
@@ -302,6 +372,8 @@ static struct attribute *sd_std_attrs[] = {
&dev_attr_csd.attr,
&dev_attr_scr.attr,
&dev_attr_date.attr,
+ &dev_attr_erase_size.attr,
+ &dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
@@ -397,6 +469,16 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
return err;
/*
+ * Fetch and process SD Status register.
+ */
+ err = mmc_read_ssr(card);
+ if (err)
+ return err;
+
+ /* Erase init depends on CSD and SSR */
+ mmc_init_erase(card);
+
+ /*
* Fetch switch information from card.
*/
err = mmc_read_switch(card);
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index 63772e7e760..797cdb5887f 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -346,3 +346,51 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int group,
return 0;
}
+int mmc_app_sd_status(struct mmc_card *card, void *ssr)
+{
+ int err;
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_data data;
+ struct scatterlist sg;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+ BUG_ON(!ssr);
+
+ /* NOTE: caller guarantees ssr is heap-allocated */
+
+ err = mmc_app_cmd(card->host, card);
+ if (err)
+ return err;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+ memset(&cmd, 0, sizeof(struct mmc_command));
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = SD_APP_SD_STATUS;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 64;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, ssr, 64);
+
+ mmc_set_data_timeout(&data, card);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error)
+ return cmd.error;
+ if (data.error)
+ return data.error;
+
+ return 0;
+}
diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
index 9742d8a3066..ffc2305d905 100644
--- a/drivers/mmc/core/sd_ops.h
+++ b/drivers/mmc/core/sd_ops.h
@@ -19,6 +19,7 @@ int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
u8 value, u8 *resp);
+int mmc_app_sd_status(struct mmc_card *card, void *ssr);
#endif