Merge remote branch 'origin' into secretlab/next-devicetree

Merging in current state of Linus' tree to deal with merge conflicts and
build failures in vio.c after merge.

Conflicts:
	drivers/i2c/busses/i2c-cpm.c
	drivers/i2c/busses/i2c-mpc.c
	drivers/net/gianfar.c

Also fixed up one line in arch/powerpc/kernel/vio.c to use the
correct node pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

16 files changed, 231 insertions, 59 deletions

diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index a2f29a38798..2d8bd86bc5e 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -35,7 +35,6 @@
 #include <linux/string.h>
 #include <linux/types.h>
 
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
@@ -376,7 +375,6 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	at91_write(priv, AT91_MCR(mb), reg_mcr);
 
 	stats->tx_bytes += cf->can_dlc;
-	dev->trans_start = jiffies;
 
 	/* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
 	can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
@@ -662,7 +660,6 @@ static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr)
 	at91_poll_err_frame(dev, cf, reg_sr);
 	netif_receive_skb(skb);
 
-	dev->last_rx = jiffies;
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += cf->can_dlc;
 
@@ -899,7 +896,6 @@ static void at91_irq_err(struct net_device *dev)
 	at91_irq_err_state(dev, cf, new_state);
 	netif_rx(skb);
 
-	dev->last_rx = jiffies;
 	dev->stats.rx_packets++;
 	dev->stats.rx_bytes += cf->can_dlc;
 
diff --git a/drivers/net/can/bfin_can.c b/drivers/net/can/bfin_can.c
index 03489864376..b6e890d2836 100644
--- a/drivers/net/can/bfin_can.c
+++ b/drivers/net/can/bfin_can.c
@@ -18,7 +18,6 @@
 #include <linux/skbuff.h>
 #include <linux/platform_device.h>
 
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
@@ -270,8 +269,6 @@ static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* fill data length code */
 	bfin_write16(&reg->chl[TRANSMIT_CHL].dlc, dlc);
 
-	dev->trans_start = jiffies;
-
 	can_put_echo_skb(skb, dev, 0);
 
 	/* set transmit request */
diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c
index b39b108318b..b11a0cb5ed8 100644
--- a/drivers/net/can/mcp251x.c
+++ b/drivers/net/can/mcp251x.c
@@ -58,7 +58,6 @@
  *
  */
 
-#include <linux/can.h>
 #include <linux/can/core.h>
 #include <linux/can/dev.h>
 #include <linux/can/platform/mcp251x.h>
@@ -476,7 +475,6 @@ static netdev_tx_t mcp251x_hard_start_xmit(struct sk_buff *skb,
 
 	netif_stop_queue(net);
 	priv->tx_skb = skb;
-	net->trans_start = jiffies;
 	queue_work(priv->wq, &priv->tx_work);
 
 	return NETDEV_TX_OK;
@@ -923,12 +921,16 @@ static int __devinit mcp251x_can_probe(struct spi_device *spi)
 	struct net_device *net;
 	struct mcp251x_priv *priv;
 	struct mcp251x_platform_data *pdata = spi->dev.platform_data;
+	int model = spi_get_device_id(spi)->driver_data;
 	int ret = -ENODEV;
 
 	if (!pdata)
 		/* Platform data is required for osc freq */
 		goto error_out;
 
+	if (model)
+		pdata->model = model;
+
 	/* Allocate can/net device */
 	net = alloc_candev(sizeof(struct mcp251x_priv), TX_ECHO_SKB_MAX);
 	if (!net) {
@@ -1118,6 +1120,15 @@ static int mcp251x_can_resume(struct spi_device *spi)
 #define mcp251x_can_resume NULL
 #endif
 
+static struct spi_device_id mcp251x_id_table[] = {
+	{ "mcp251x", 	0 /* Use pdata.model */ },
+	{ "mcp2510",	CAN_MCP251X_MCP2510 },
+	{ "mcp2515",	CAN_MCP251X_MCP2515 },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(spi, mcp251x_id_table);
+
 static struct spi_driver mcp251x_can_driver = {
 	.driver = {
 		.name = DEVICE_NAME,
@@ -1125,6 +1136,7 @@ static struct spi_driver mcp251x_can_driver = {
 		.owner = THIS_MODULE,
 	},
 
+	.id_table = mcp251x_id_table,
 	.probe = mcp251x_can_probe,
 	.remove = __devexit_p(mcp251x_can_remove),
 	.suspend = mcp251x_can_suspend,
diff --git a/drivers/net/can/mscan/mpc5xxx_can.c b/drivers/net/can/mscan/mpc5xxx_can.c
index 2120784f8db..8af8442c694 100644
--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -25,7 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/netdevice.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/of_platform.h>
 #include <sysdev/fsl_soc.h>
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 6b7dd578d41..64c378cd0c3 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -28,7 +28,6 @@
 #include <linux/if_arp.h>
 #include <linux/if_ether.h>
 #include <linux/list.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 #include <linux/io.h>
diff --git a/drivers/net/can/sja1000/Kconfig b/drivers/net/can/sja1000/Kconfig
index 9e277d64a31..ae3505afd68 100644
--- a/drivers/net/can/sja1000/Kconfig
+++ b/drivers/net/can/sja1000/Kconfig
@@ -53,7 +53,9 @@ config CAN_PLX_PCI
 	  Driver supports now:
 	   - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
 	   - Adlink PCI-7841/cPCI-7841 SE card
+	   - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
+	   - esd CAN-PCI/PMC/266
+	   - esd CAN-PCIe/2000
 	   - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
 	   - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
-
 endif
diff --git a/drivers/net/can/sja1000/ems_pci.c b/drivers/net/can/sja1000/ems_pci.c
index 5f53da0bc40..36f4f9780c3 100644
--- a/drivers/net/can/sja1000/ems_pci.c
+++ b/drivers/net/can/sja1000/ems_pci.c
@@ -24,7 +24,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/io.h>
 
diff --git a/drivers/net/can/sja1000/kvaser_pci.c b/drivers/net/can/sja1000/kvaser_pci.c
index 441e776a7f5..ed004cebd31 100644
--- a/drivers/net/can/sja1000/kvaser_pci.c
+++ b/drivers/net/can/sja1000/kvaser_pci.c
@@ -36,7 +36,6 @@
 #include <linux/netdevice.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/io.h>
 
diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 4aff4070db9..437b5c716a2 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -27,7 +27,6 @@
 #include <linux/delay.h>
 #include <linux/slab.h>
 #include <linux/pci.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/io.h>
 
@@ -41,7 +40,10 @@ MODULE_DESCRIPTION("Socket-CAN driver for PLX90xx PCI-bridge cards with "
 MODULE_SUPPORTED_DEVICE("Adlink PCI-7841/cPCI-7841, "
 			"Adlink PCI-7841/cPCI-7841 SE, "
 			"Marathon CAN-bus-PCI, "
-			"TEWS TECHNOLOGIES TPMC810");
+			"TEWS TECHNOLOGIES TPMC810, "
+			"esd CAN-PCI/CPCI/PCI104/200, "
+			"esd CAN-PCI/PMC/266, "
+			"esd CAN-PCIe/2000")
 MODULE_LICENSE("GPL v2");
 
 #define PLX_PCI_MAX_CHAN 2
@@ -50,11 +52,14 @@ struct plx_pci_card {
 	int channels;			/* detected channels count */
 	struct net_device *net_dev[PLX_PCI_MAX_CHAN];
 	void __iomem *conf_addr;
+
+	/* Pointer to device-dependent reset function */
+	void (*reset_func)(struct pci_dev *pdev);
 };
 
 #define PLX_PCI_CAN_CLOCK (16000000 / 2)
 
-/* PLX90xx registers */
+/* PLX9030/9050/9052 registers */
 #define PLX_INTCSR	0x4c		/* Interrupt Control/Status */
 #define PLX_CNTRL	0x50		/* User I/O, Direct Slave Response,
 					 * Serial EEPROM, and Initialization
@@ -66,6 +71,14 @@ struct plx_pci_card {
 #define PLX_PCI_INT_EN	(1 << 6)	/* PCI Interrupt Enable */
 #define PLX_PCI_RESET	(1 << 30)	/* PCI Adapter Software Reset */
 
+/* PLX9056 registers */
+#define PLX9056_INTCSR	0x68		/* Interrupt Control/Status */
+#define PLX9056_CNTRL	0x6c		/* Control / Software Reset */
+
+#define PLX9056_LINTI	(1 << 11)
+#define PLX9056_PCI_INT_EN (1 << 8)
+#define PLX9056_PCI_RCR	(1 << 29)	/* Read Configuration Registers */
+
 /*
  * The board configuration is probably following:
  * RX1 is connected to ground.
@@ -101,6 +114,13 @@ struct plx_pci_card {
 #define ADLINK_PCI_VENDOR_ID		0x144A
 #define ADLINK_PCI_DEVICE_ID		0x7841
 
+#define ESD_PCI_SUB_SYS_ID_PCI200	0x0004
+#define ESD_PCI_SUB_SYS_ID_PCI266	0x0009
+#define ESD_PCI_SUB_SYS_ID_PMC266	0x000e
+#define ESD_PCI_SUB_SYS_ID_CPCI200	0x010b
+#define ESD_PCI_SUB_SYS_ID_PCIE2000	0x0200
+#define ESD_PCI_SUB_SYS_ID_PCI104200	0x0501
+
 #define MARATHON_PCI_DEVICE_ID		0x2715
 
 #define TEWS_PCI_VENDOR_ID		0x1498
@@ -108,6 +128,7 @@ struct plx_pci_card {
 
 static void plx_pci_reset_common(struct pci_dev *pdev);
 static void plx_pci_reset_marathon(struct pci_dev *pdev);
+static void plx9056_pci_reset_common(struct pci_dev *pdev);
 
 struct plx_pci_channel_map {
 	u32 bar;
@@ -148,6 +169,30 @@ static struct plx_pci_card_info plx_pci_card_info_adlink_se __devinitdata = {
 	/* based on PLX9052 */
 };
 
+static struct plx_pci_card_info plx_pci_card_info_esd200 __devinitdata = {
+	"esd CAN-PCI/CPCI/PCI104/200", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
+	&plx_pci_reset_common
+	/* based on PLX9030/9050 */
+};
+
+static struct plx_pci_card_info plx_pci_card_info_esd266 __devinitdata = {
+	"esd CAN-PCI/PMC/266", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
+	&plx9056_pci_reset_common
+	/* based on PLX9056 */
+};
+
+static struct plx_pci_card_info plx_pci_card_info_esd2000 __devinitdata = {
+	"esd CAN-PCIe/2000", 2,
+	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
+	{0, 0x00, 0x00}, { {2, 0x00, 0x80}, {2, 0x100, 0x80} },
+	&plx9056_pci_reset_common
+	/* based on PEX8311 */
+};
+
 static struct plx_pci_card_info plx_pci_card_info_marathon __devinitdata = {
 	"Marathon CAN-bus-PCI", 2,
 	PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR,
@@ -180,6 +225,48 @@ static DEFINE_PCI_DEVICE_TABLE(plx_pci_tbl) = {
 		(kernel_ulong_t)&plx_pci_card_info_adlink_se
 	},
 	{
+		/* esd CAN-PCI/200 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI200,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd200
+	},
+	{
+		/* esd CAN-CPCI/200 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_CPCI200,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd200
+	},
+	{
+		/* esd CAN-PCI104/200 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI104200,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd200
+	},
+	{
+		/* esd CAN-PCI/266 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCI266,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd266
+	},
+	{
+		/* esd CAN-PMC/266 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PMC266,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd266
+	},
+	{
+		/* esd CAN-PCIE/2000 */
+		PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9056,
+		PCI_VENDOR_ID_ESDGMBH, ESD_PCI_SUB_SYS_ID_PCIE2000,
+		0, 0,
+		(kernel_ulong_t)&plx_pci_card_info_esd2000
+	},
+	{
 		/* Marathon CAN-bus-PCI card */
 		PCI_VENDOR_ID_PLX, MARATHON_PCI_DEVICE_ID,
 		PCI_ANY_ID, PCI_ANY_ID,
@@ -242,7 +329,7 @@ static inline int plx_pci_check_sja1000(const struct sja1000_priv *priv)
 }
 
 /*
- * PLX90xx software reset
+ * PLX9030/50/52 software reset
  * Also LRESET# asserts and brings to reset device on the Local Bus (if wired).
  * For most cards it's enough for reset the SJA1000 chips.
  */
@@ -259,6 +346,38 @@ static void plx_pci_reset_common(struct pci_dev *pdev)
 	iowrite32(cntrl, card->conf_addr + PLX_CNTRL);
 };
 
+/*
+ * PLX9056 software reset
+ * Assert LRESET# and reset device(s) on the Local Bus (if wired).
+ */
+static void plx9056_pci_reset_common(struct pci_dev *pdev)
+{
+	struct plx_pci_card *card = pci_get_drvdata(pdev);
+	u32 cntrl;
+
+	/* issue a local bus reset */
+	cntrl = ioread32(card->conf_addr + PLX9056_CNTRL);
+	cntrl |= PLX_PCI_RESET;
+	iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
+	udelay(100);
+	cntrl ^= PLX_PCI_RESET;
+	iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
+
+	/* reload local configuration from EEPROM */
+	cntrl |= PLX9056_PCI_RCR;
+	iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
+
+	/*
+	 * There is no safe way to poll for the end
+	 * of reconfiguration process. Waiting for 10ms
+	 * is safe.
+	 */
+	mdelay(10);
+
+	cntrl ^= PLX9056_PCI_RCR;
+	iowrite32(cntrl, card->conf_addr + PLX9056_CNTRL);
+};
+
 /* Special reset function for Marathon card */
 static void plx_pci_reset_marathon(struct pci_dev *pdev)
 {
@@ -302,13 +421,16 @@ static void plx_pci_del_card(struct pci_dev *pdev)
 		free_sja1000dev(dev);
 	}
 
-	plx_pci_reset_common(pdev);
+	card->reset_func(pdev);
 
 	/*
-	 * Disable interrupts from PCI-card (PLX90xx) and disable Local_1,
-	 * Local_2 interrupts
+	 * Disable interrupts from PCI-card and disable local
+	 * interrupts
 	 */
-	iowrite32(0x0, card->conf_addr + PLX_INTCSR);
+	if (pdev->device != PCI_DEVICE_ID_PLX_9056)
+		iowrite32(0x0, card->conf_addr + PLX_INTCSR);
+	else
+		iowrite32(0x0, card->conf_addr + PLX9056_INTCSR);
 
 	if (card->conf_addr)
 		pci_iounmap(pdev, card->conf_addr);
@@ -367,6 +489,7 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
 	card->conf_addr = addr + ci->conf_map.offset;
 
 	ci->reset_func(pdev);
+	card->reset_func = ci->reset_func;
 
 	/* Detect available channels */
 	for (i = 0; i < ci->channel_count; i++) {
@@ -438,10 +561,17 @@ static int __devinit plx_pci_add_card(struct pci_dev *pdev,
 	 * Enable interrupts from PCI-card (PLX90xx) and enable Local_1,
 	 * Local_2 interrupts from the SJA1000 chips
 	 */
-	val = ioread32(card->conf_addr + PLX_INTCSR);
-	val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN;
-	iowrite32(val, card->conf_addr + PLX_INTCSR);
-
+	if (pdev->device != PCI_DEVICE_ID_PLX_9056) {
+		val = ioread32(card->conf_addr + PLX_INTCSR);
+		if (pdev->subsystem_vendor == PCI_VENDOR_ID_ESDGMBH)
+			val |= PLX_LINT1_EN | PLX_PCI_INT_EN;
+		else
+			val |= PLX_LINT1_EN | PLX_LINT2_EN | PLX_PCI_INT_EN;
+		iowrite32(val, card->conf_addr + PLX_INTCSR);
+	} else {
+		iowrite32(PLX9056_LINTI | PLX9056_PCI_INT_EN,
+			  card->conf_addr + PLX9056_INTCSR);
+	}
 	return 0;
 
 failure_cleanup:
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 145b1a731a5..85f7cbfe8e5 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -60,7 +60,6 @@
 #include <linux/skbuff.h>
 #include <linux/delay.h>
 
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
@@ -84,6 +83,20 @@ static struct can_bittiming_const sja1000_bittiming_const = {
 	.brp_inc = 1,
 };
 
+static void sja1000_write_cmdreg(struct sja1000_priv *priv, u8 val)
+{
+	unsigned long flags;
+
+	/*
+	 * The command register needs some locking and time to settle
+	 * the write_reg() operation - especially on SMP systems.
+	 */
+	spin_lock_irqsave(&priv->cmdreg_lock, flags);
+	priv->write_reg(priv, REG_CMR, val);
+	priv->read_reg(priv, REG_SR);
+	spin_unlock_irqrestore(&priv->cmdreg_lock, flags);
+}
+
 static int sja1000_probe_chip(struct net_device *dev)
 {
 	struct sja1000_priv *priv = netdev_priv(dev);
@@ -293,11 +306,9 @@ static netdev_tx_t sja1000_start_xmit(struct sk_buff *skb,
 	for (i = 0; i < dlc; i++)
 		priv->write_reg(priv, dreg++, cf->data[i]);
 
-	dev->trans_start = jiffies;
-
 	can_put_echo_skb(skb, dev, 0);
 
-	priv->write_reg(priv, REG_CMR, CMD_TR);
+	sja1000_write_cmdreg(priv, CMD_TR);
 
 	return NETDEV_TX_OK;
 }
@@ -346,7 +357,7 @@ static void sja1000_rx(struct net_device *dev)
 	cf->can_id = id;
 
 	/* release receive buffer */
-	priv->write_reg(priv, REG_CMR, CMD_RRB);
+	sja1000_write_cmdreg(priv, CMD_RRB);
 
 	netif_rx(skb);
 
@@ -374,7 +385,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
 		cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
 		stats->rx_over_errors++;
 		stats->rx_errors++;
-		priv->write_reg(priv, REG_CMR, CMD_CDO);	/* clear bit */
+		sja1000_write_cmdreg(priv, CMD_CDO);	/* clear bit */
 	}
 
 	if (isrc & IRQ_EI) {
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 97a622b9302..de8e778f683 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -167,6 +167,7 @@ struct sja1000_priv {
 
 	void __iomem *reg_base;	 /* ioremap'ed address to registers */
 	unsigned long irq_flags; /* for request_irq() */
+	spinlock_t cmdreg_lock;  /* lock for concurrent cmd register writes */
 
 	u16 flags;		/* custom mode flags */
 	u8 ocr;			/* output control register */
diff --git a/drivers/net/can/sja1000/sja1000_isa.c b/drivers/net/can/sja1000/sja1000_isa.c
index a6a51f15596..496223e9e2f 100644
--- a/drivers/net/can/sja1000/sja1000_isa.c
+++ b/drivers/net/can/sja1000/sja1000_isa.c
@@ -23,7 +23,6 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
 
diff --git a/drivers/net/can/sja1000/sja1000_of_platform.c b/drivers/net/can/sja1000/sja1000_of_platform.c
index 158b76ebf3e..ac1a83d7c20 100644
--- a/drivers/net/can/sja1000/sja1000_of_platform.c
+++ b/drivers/net/can/sja1000/sja1000_of_platform.c
@@ -38,7 +38,6 @@
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>
 #include <linux/delay.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 
 #include <linux/of_platform.h>
diff --git a/drivers/net/can/sja1000/sja1000_platform.c b/drivers/net/can/sja1000/sja1000_platform.c
index 628374c2a05..d9fadc489b3 100644
--- a/drivers/net/can/sja1000/sja1000_platform.c
+++ b/drivers/net/can/sja1000/sja1000_platform.c
@@ -24,7 +24,6 @@
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
 #include <linux/io.h>
@@ -37,16 +36,36 @@ MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
 MODULE_DESCRIPTION("Socket-CAN driver for SJA1000 on the platform bus");
 MODULE_LICENSE("GPL v2");
 
-static u8 sp_read_reg(const struct sja1000_priv *priv, int reg)
+static u8 sp_read_reg8(const struct sja1000_priv *priv, int reg)
 {
 	return ioread8(priv->reg_base + reg);
 }
 
-static void sp_write_reg(const struct sja1000_priv *priv, int reg, u8 val)
+static void sp_write_reg8(const struct sja1000_priv *priv, int reg, u8 val)
 {
 	iowrite8(val, priv->reg_base + reg);
 }
 
+static u8 sp_read_reg16(const struct sja1000_priv *priv, int reg)
+{
+	return ioread8(priv->reg_base + reg * 2);
+}
+
+static void sp_write_reg16(const struct sja1000_priv *priv, int reg, u8 val)
+{
+	iowrite8(val, priv->reg_base + reg * 2);
+}
+
+static u8 sp_read_reg32(const struct sja1000_priv *priv, int reg)
+{
+	return ioread8(priv->reg_base + reg * 4);
+}
+
+static void sp_write_reg32(const struct sja1000_priv *priv, int reg, u8 val)
+{
+	iowrite8(val, priv->reg_base + reg * 4);
+}
+
 static int sp_probe(struct platform_device *pdev)
 {
 	int err;
@@ -90,14 +109,29 @@ static int sp_probe(struct platform_device *pdev)
 	priv = netdev_priv(dev);
 
 	dev->irq = res_irq->start;
-	priv->irq_flags = res_irq->flags & IRQF_TRIGGER_MASK;
+	priv->irq_flags = res_irq->flags & (IRQF_TRIGGER_MASK | IRQF_SHARED);
 	priv->reg_base = addr;
-	priv->read_reg = sp_read_reg;
-	priv->write_reg = sp_write_reg;
-	priv->can.clock.freq = pdata->clock;
+	/* The CAN clock frequency is half the oscillator clock frequency */
+	priv->can.clock.freq = pdata->osc_freq / 2;
 	priv->ocr = pdata->ocr;
 	priv->cdr = pdata->cdr;
 
+	switch (res_mem->flags & IORESOURCE_MEM_TYPE_MASK) {
+	case IORESOURCE_MEM_32BIT:
+		priv->read_reg = sp_read_reg32;
+		priv->write_reg = sp_write_reg32;
+		break;
+	case IORESOURCE_MEM_16BIT:
+		priv->read_reg = sp_read_reg16;
+		priv->write_reg = sp_write_reg16;
+		break;
+	case IORESOURCE_MEM_8BIT:
+	default:
+		priv->read_reg = sp_read_reg8;
+		priv->write_reg = sp_write_reg8;
+		break;
+	}
+
 	dev_set_drvdata(&pdev->dev, dev);
 	SET_NETDEV_DEV(dev, &pdev->dev);
 
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 0c3d2ba0d17..4d07f1ee716 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -47,7 +47,6 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 
-#include <linux/can.h>
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 #include <linux/can/platform/ti_hecc.h>
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 33451092b8e..1fc0871d2ef 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -300,8 +300,6 @@ static void ems_usb_read_interrupt_callback(struct urb *urb)
 	else if (err)
 		dev_err(netdev->dev.parent,
 			"failed resubmitting intr urb: %d\n", err);
-
-	return;
 }
 
 static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
@@ -497,8 +495,6 @@ resubmit_urb:
 	else if (retval)
 		dev_err(netdev->dev.parent,
 			"failed resubmitting read bulk urb: %d\n", retval);
-
-	return;
 }
 
 /*
@@ -516,8 +512,8 @@ static void ems_usb_write_bulk_callback(struct urb *urb)
 	netdev = dev->netdev;
 
 	/* free up our allocated buffer */
-	usb_buffer_free(urb->dev, urb->transfer_buffer_length,
-			urb->transfer_buffer, urb->transfer_dma);
+	usb_free_coherent(urb->dev, urb->transfer_buffer_length,
+			  urb->transfer_buffer, urb->transfer_dma);
 
 	atomic_dec(&dev->active_tx_urbs);
 
@@ -614,8 +610,8 @@ static int ems_usb_start(struct ems_usb *dev)
 			return -ENOMEM;
 		}
 
-		buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
-				       &urb->transfer_dma);
+		buf = usb_alloc_coherent(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+					 &urb->transfer_dma);
 		if (!buf) {
 			dev_err(netdev->dev.parent,
 				"No memory left for USB buffer\n");
@@ -635,8 +631,8 @@ static int ems_usb_start(struct ems_usb *dev)
 				netif_device_detach(dev->netdev);
 
 			usb_unanchor_urb(urb);
-			usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf,
-					urb->transfer_dma);
+			usb_free_coherent(dev->udev, RX_BUFFER_SIZE, buf,
+					  urb->transfer_dma);
 			break;
 		}
 
@@ -777,7 +773,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 		goto nomem;
 	}
 
-	buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
+	buf = usb_alloc_coherent(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
 	if (!buf) {
 		dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
 		usb_free_urb(urb);
@@ -820,7 +816,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 	 */
 	if (!context) {
 		usb_unanchor_urb(urb);
-		usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
 
 		dev_warn(netdev->dev.parent, "couldn't find free context\n");
 
@@ -845,7 +841,7 @@ static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *ne
 		can_free_echo_skb(netdev, context->echo_index);
 
 		usb_unanchor_urb(urb);
-		usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+		usb_free_coherent(dev->udev, size, buf, urb->transfer_dma);
 		dev_kfree_skb(skb);
 
 		atomic_dec(&dev->active_tx_urbs);
@@ -1006,7 +1002,7 @@ static int ems_usb_probe(struct usb_interface *intf,
 
 	netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS);
 	if (!netdev) {
-		dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
+		dev_err(&intf->dev, "ems_usb: Couldn't alloc candev\n");
 		return -ENOMEM;
 	}
 
@@ -1036,20 +1032,20 @@ static int ems_usb_probe(struct usb_interface *intf,
 
 	dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
 	if (!dev->intr_urb) {
-		dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n");
+		dev_err(&intf->dev, "Couldn't alloc intr URB\n");
 		goto cleanup_candev;
 	}
 
 	dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
 	if (!dev->intr_in_buffer) {
-		dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n");
+		dev_err(&intf->dev, "Couldn't alloc Intr buffer\n");
 		goto cleanup_intr_urb;
 	}
 
 	dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE +
 				     sizeof(struct ems_cpc_msg), GFP_KERNEL);
 	if (!dev->tx_msg_buffer) {
-		dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n");
+		dev_err(&intf->dev, "Couldn't alloc Tx buffer\n");
 		goto cleanup_intr_in_buffer;
 	}