be2net: Implement initiate FW dump feature for Lancer

Added code to initiate FW dump via ethtool. Driver checks if the previous dump
has been cleared before initiating the dump. It doesn't initiate the dump
if it is not cleared.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 66 insertions, 0 deletions

diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index a236ecd27cf..4d0ec3649a6 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -3255,6 +3255,72 @@ err:
 	return status;
 }
 
+static int lancer_wait_idle(struct be_adapter *adapter)
+{
+#define SLIPORT_IDLE_TIMEOUT 30
+	u32 reg_val;
+	int status = 0, i;
+
+	for (i = 0; i < SLIPORT_IDLE_TIMEOUT; i++) {
+		reg_val = ioread32(adapter->db + PHYSDEV_CONTROL_OFFSET);
+		if ((reg_val & PHYSDEV_CONTROL_INP_MASK) == 0)
+			break;
+
+		ssleep(1);
+	}
+
+	if (i == SLIPORT_IDLE_TIMEOUT)
+		status = -1;
+
+	return status;
+}
+
+int lancer_physdev_ctrl(struct be_adapter *adapter, u32 mask)
+{
+	int status = 0;
+
+	status = lancer_wait_idle(adapter);
+	if (status)
+		return status;
+
+	iowrite32(mask, adapter->db + PHYSDEV_CONTROL_OFFSET);
+
+	return status;
+}
+
+/* Routine to check whether dump image is present or not */
+bool dump_present(struct be_adapter *adapter)
+{
+	u32 sliport_status = 0;
+
+	sliport_status = ioread32(adapter->db + SLIPORT_STATUS_OFFSET);
+	return !!(sliport_status & SLIPORT_STATUS_DIP_MASK);
+}
+
+int lancer_initiate_dump(struct be_adapter *adapter)
+{
+	int status;
+
+	/* give firmware reset and diagnostic dump */
+	status = lancer_physdev_ctrl(adapter, PHYSDEV_CONTROL_FW_RESET_MASK |
+				     PHYSDEV_CONTROL_DD_MASK);
+	if (status < 0) {
+		dev_err(&adapter->pdev->dev, "Firmware reset failed\n");
+		return status;
+	}
+
+	status = lancer_wait_idle(adapter);
+	if (status)
+		return status;
+
+	if (!dump_present(adapter)) {
+		dev_err(&adapter->pdev->dev, "Dump image not present\n");
+		return -1;
+	}
+
+	return 0;
+}
+
 /* Uses sync mcc */
 int be_cmd_enable_vf(struct be_adapter *adapter, u8 domain)
 {