Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 31 insertions, 6 deletions

diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index 2abce965c7b..a0fe6e3fce6 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -1,5 +1,5 @@
 /*
- * drivers/net/ibm_newemac/core.c
+ * drivers/net/ethernet/ibm/emac/core.c
  *
  * Driver for PowerPC 4xx on-chip ethernet controller.
  *
@@ -434,6 +434,11 @@ static inline u32 emac_iff2rmr(struct net_device *ndev)
 	else if (!netdev_mc_empty(ndev))
 		r |= EMAC_RMR_MAE;
 
+	if (emac_has_feature(dev, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE)) {
+		r &= ~EMAC4_RMR_MJS_MASK;
+		r |= EMAC4_RMR_MJS(ndev->mtu);
+	}
+
 	return r;
 }
 
@@ -965,6 +970,7 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 	int rx_sync_size = emac_rx_sync_size(new_mtu);
 	int rx_skb_size = emac_rx_skb_size(new_mtu);
 	int i, ret = 0;
+	int mr1_jumbo_bit_change = 0;
 
 	mutex_lock(&dev->link_lock);
 	emac_netif_stop(dev);
@@ -1013,7 +1019,15 @@ static int emac_resize_rx_ring(struct emac_instance *dev, int new_mtu)
 	}
  skip:
 	/* Check if we need to change "Jumbo" bit in MR1 */
-	if ((new_mtu > ETH_DATA_LEN) ^ (dev->ndev->mtu > ETH_DATA_LEN)) {
+	if (emac_has_feature(dev, EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE)) {
+		mr1_jumbo_bit_change = (new_mtu > ETH_DATA_LEN) ||
+				(dev->ndev->mtu > ETH_DATA_LEN);
+	} else {
+		mr1_jumbo_bit_change = (new_mtu > ETH_DATA_LEN) ^
+				(dev->ndev->mtu > ETH_DATA_LEN);
+	}
+
+	if (mr1_jumbo_bit_change) {
 		/* This is to prevent starting RX channel in emac_rx_enable() */
 		set_bit(MAL_COMMAC_RX_STOPPED, &dev->commac.flags);
 
@@ -2471,6 +2485,7 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
 
 	/* Disable any PHY features not supported by the platform */
 	dev->phy.def->features &= ~dev->phy_feat_exc;
+	dev->phy.features &= ~dev->phy_feat_exc;
 
 	/* Setup initial link parameters */
 	if (dev->phy.features & SUPPORTED_Autoneg) {
@@ -2568,6 +2583,11 @@ static int __devinit emac_init_config(struct emac_instance *dev)
 		if (of_device_is_compatible(np, "ibm,emac-405ex") ||
 		    of_device_is_compatible(np, "ibm,emac-405exr"))
 			dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
+		if (of_device_is_compatible(np, "ibm,emac-apm821xx")) {
+			dev->features |= (EMAC_APM821XX_REQ_JUMBO_FRAME_SIZE |
+					  EMAC_FTR_APM821XX_NO_HALF_DUPLEX |
+					  EMAC_FTR_460EX_PHY_CLK_FIX);
+		}
 	} else if (of_device_is_compatible(np, "ibm,emac4")) {
 		dev->features |= EMAC_FTR_EMAC4;
 		if (of_device_is_compatible(np, "ibm,emac-440gx"))
@@ -2706,11 +2726,9 @@ static int __devinit emac_probe(struct platform_device *ofdev)
 	/* Allocate our net_device structure */
 	err = -ENOMEM;
 	ndev = alloc_etherdev(sizeof(struct emac_instance));
-	if (!ndev) {
-		printk(KERN_ERR "%s: could not allocate ethernet device!\n",
-		       np->full_name);
+	if (!ndev)
 		goto err_gone;
-	}
+
 	dev = netdev_priv(ndev);
 	dev->ndev = ndev;
 	dev->ofdev = ofdev;
@@ -2818,6 +2836,13 @@ static int __devinit emac_probe(struct platform_device *ofdev)
 	dev->stop_timeout = STOP_TIMEOUT_100;
 	INIT_DELAYED_WORK(&dev->link_work, emac_link_timer);
 
+	/* Some SoCs like APM821xx does not support Half Duplex mode. */
+	if (emac_has_feature(dev, EMAC_FTR_APM821XX_NO_HALF_DUPLEX)) {
+		dev->phy_feat_exc = (SUPPORTED_1000baseT_Half |
+				     SUPPORTED_100baseT_Half |
+				     SUPPORTED_10baseT_Half);
+	}
+
 	/* Find PHY if any */
 	err = emac_init_phy(dev);
 	if (err != 0)