Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 138 insertions, 69 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index fb2c28e799a..db35dd5d96d 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2011 Intel Corporation.
+  Copyright(c) 1999 - 2012 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -34,6 +34,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/vmalloc.h>
 
 #include "e1000.h"
 
@@ -257,7 +258,7 @@ static int e1000_set_settings(struct net_device *netdev,
 	 * When SoL/IDER sessions are active, autoneg/speed/duplex
 	 * cannot be changed
 	 */
-	if (e1000_check_reset_block(hw)) {
+	if (hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot change link characteristics when SoL/IDER is "
 		      "active.\n");
 		return -EINVAL;
@@ -536,7 +537,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
 		ptr++;
 	}
-	if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
+	if (((eeprom->offset + eeprom->len) & 1) && (!ret_val))
 		/* need read/modify/write of last changed EEPROM word */
 		/* only the first byte of the word is being modified */
 		ret_val = e1000_read_nvm(hw, last_word, 1,
@@ -552,7 +553,7 @@ static int e1000_set_eeprom(struct net_device *netdev,
 	memcpy(ptr, bytes, eeprom->len);
 
 	for (i = 0; i < last_word - first_word + 1; i++)
-		eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+		cpu_to_le16s(&eeprom_buff[i]);
 
 	ret_val = e1000_write_nvm(hw, first_word,
 				  last_word - first_word + 1, eeprom_buff);
@@ -605,94 +606,112 @@ static void e1000_get_ringparam(struct net_device *netdev,
 				struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_ring *tx_ring = adapter->tx_ring;
-	struct e1000_ring *rx_ring = adapter->rx_ring;
 
 	ring->rx_max_pending = E1000_MAX_RXD;
 	ring->tx_max_pending = E1000_MAX_TXD;
-	ring->rx_pending = rx_ring->count;
-	ring->tx_pending = tx_ring->count;
+	ring->rx_pending = adapter->rx_ring_count;
+	ring->tx_pending = adapter->tx_ring_count;
 }
 
 static int e1000_set_ringparam(struct net_device *netdev,
 			       struct ethtool_ringparam *ring)
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
-	struct e1000_ring *tx_ring, *tx_old;
-	struct e1000_ring *rx_ring, *rx_old;
-	int err;
+	struct e1000_ring *temp_tx = NULL, *temp_rx = NULL;
+	int err = 0, size = sizeof(struct e1000_ring);
+	bool set_tx = false, set_rx = false;
+	u16 new_rx_count, new_tx_count;
 
 	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 		return -EINVAL;
 
-	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
-		usleep_range(1000, 2000);
+	new_rx_count = clamp_t(u32, ring->rx_pending, E1000_MIN_RXD,
+			       E1000_MAX_RXD);
+	new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
 
-	if (netif_running(adapter->netdev))
-		e1000e_down(adapter);
+	new_tx_count = clamp_t(u32, ring->tx_pending, E1000_MIN_TXD,
+			       E1000_MAX_TXD);
+	new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
 
-	tx_old = adapter->tx_ring;
-	rx_old = adapter->rx_ring;
+	if ((new_tx_count == adapter->tx_ring_count) &&
+	    (new_rx_count == adapter->rx_ring_count))
+		/* nothing to do */
+		return 0;
 
-	err = -ENOMEM;
-	tx_ring = kmemdup(tx_old, sizeof(struct e1000_ring), GFP_KERNEL);
-	if (!tx_ring)
-		goto err_alloc_tx;
+	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+		usleep_range(1000, 2000);
 
-	rx_ring = kmemdup(rx_old, sizeof(struct e1000_ring), GFP_KERNEL);
-	if (!rx_ring)
-		goto err_alloc_rx;
+	if (!netif_running(adapter->netdev)) {
+		/* Set counts now and allocate resources during open() */
+		adapter->tx_ring->count = new_tx_count;
+		adapter->rx_ring->count = new_rx_count;
+		adapter->tx_ring_count = new_tx_count;
+		adapter->rx_ring_count = new_rx_count;
+		goto clear_reset;
+	}
 
-	adapter->tx_ring = tx_ring;
-	adapter->rx_ring = rx_ring;
+	set_tx = (new_tx_count != adapter->tx_ring_count);
+	set_rx = (new_rx_count != adapter->rx_ring_count);
 
-	rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
-	rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
-	rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+	/* Allocate temporary storage for ring updates */
+	if (set_tx) {
+		temp_tx = vmalloc(size);
+		if (!temp_tx) {
+			err = -ENOMEM;
+			goto free_temp;
+		}
+	}
+	if (set_rx) {
+		temp_rx = vmalloc(size);
+		if (!temp_rx) {
+			err = -ENOMEM;
+			goto free_temp;
+		}
+	}
 
-	tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
-	tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
-	tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+	e1000e_down(adapter);
 
-	if (netif_running(adapter->netdev)) {
-		/* Try to get new resources before deleting old */
-		err = e1000e_setup_rx_resources(adapter);
+	/*
+	 * We can't just free everything and then setup again, because the
+	 * ISRs in MSI-X mode get passed pointers to the Tx and Rx ring
+	 * structs.  First, attempt to allocate new resources...
+	 */
+	if (set_tx) {
+		memcpy(temp_tx, adapter->tx_ring, size);
+		temp_tx->count = new_tx_count;
+		err = e1000e_setup_tx_resources(temp_tx);
 		if (err)
-			goto err_setup_rx;
-		err = e1000e_setup_tx_resources(adapter);
+			goto err_setup;
+	}
+	if (set_rx) {
+		memcpy(temp_rx, adapter->rx_ring, size);
+		temp_rx->count = new_rx_count;
+		err = e1000e_setup_rx_resources(temp_rx);
 		if (err)
-			goto err_setup_tx;
+			goto err_setup_rx;
+	}
 
-		/*
-		 * restore the old in order to free it,
-		 * then add in the new
-		 */
-		adapter->rx_ring = rx_old;
-		adapter->tx_ring = tx_old;
-		e1000e_free_rx_resources(adapter);
-		e1000e_free_tx_resources(adapter);
-		kfree(tx_old);
-		kfree(rx_old);
-		adapter->rx_ring = rx_ring;
-		adapter->tx_ring = tx_ring;
-		err = e1000e_up(adapter);
-		if (err)
-			goto err_setup;
+	/* ...then free the old resources and copy back any new ring data */
+	if (set_tx) {
+		e1000e_free_tx_resources(adapter->tx_ring);
+		memcpy(adapter->tx_ring, temp_tx, size);
+		adapter->tx_ring_count = new_tx_count;
+	}
+	if (set_rx) {
+		e1000e_free_rx_resources(adapter->rx_ring);
+		memcpy(adapter->rx_ring, temp_rx, size);
+		adapter->rx_ring_count = new_rx_count;
 	}
 
-	clear_bit(__E1000_RESETTING, &adapter->state);
-	return 0;
-err_setup_tx:
-	e1000e_free_rx_resources(adapter);
 err_setup_rx:
-	adapter->rx_ring = rx_old;
-	adapter->tx_ring = tx_old;
-	kfree(rx_ring);
-err_alloc_rx:
-	kfree(tx_ring);
-err_alloc_tx:
-	e1000e_up(adapter);
+	if (err && set_tx)
+		e1000e_free_tx_resources(temp_tx);
 err_setup:
+	e1000e_up(adapter);
+free_temp:
+	vfree(temp_tx);
+	vfree(temp_rx);
+clear_reset:
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return err;
 }
@@ -1069,7 +1088,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	tx_ring->buffer_info = kcalloc(tx_ring->count,
 				       sizeof(struct e1000_buffer),
 				       GFP_KERNEL);
-	if (!(tx_ring->buffer_info)) {
+	if (!tx_ring->buffer_info) {
 		ret_val = 1;
 		goto err_nomem;
 	}
@@ -1131,7 +1150,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
 	rx_ring->buffer_info = kcalloc(rx_ring->count,
 				       sizeof(struct e1000_buffer),
 				       GFP_KERNEL);
-	if (!(rx_ring->buffer_info)) {
+	if (!rx_ring->buffer_info) {
 		ret_val = 5;
 		goto err_nomem;
 	}
@@ -1579,11 +1598,13 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
 
 static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
 {
+	struct e1000_hw *hw = &adapter->hw;
+
 	/*
 	 * PHY loopback cannot be performed if SoL/IDER
 	 * sessions are active
 	 */
-	if (e1000_check_reset_block(&adapter->hw)) {
+	if (hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
 		*data = 0;
 		goto out;
@@ -1837,11 +1858,11 @@ static int e1000_set_phys_id(struct net_device *netdev,
 		break;
 
 	case ETHTOOL_ID_ON:
-		adapter->hw.mac.ops.led_on(&adapter->hw);
+		hw->mac.ops.led_on(hw);
 		break;
 
 	case ETHTOOL_ID_OFF:
-		adapter->hw.mac.ops.led_off(&adapter->hw);
+		hw->mac.ops.led_off(hw);
 		break;
 	}
 	return 0;
@@ -1955,6 +1976,53 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
 	}
 }
 
+static int e1000_get_rxnfc(struct net_device *netdev,
+			   struct ethtool_rxnfc *info, u32 *rule_locs)
+{
+	info->data = 0;
+
+	switch (info->cmd) {
+	case ETHTOOL_GRXFH: {
+		struct e1000_adapter *adapter = netdev_priv(netdev);
+		struct e1000_hw *hw = &adapter->hw;
+		u32 mrqc = er32(MRQC);
+
+		if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
+			return 0;
+
+		switch (info->flow_type) {
+		case TCP_V4_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV4_TCP)
+				info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+			/* fall through */
+		case UDP_V4_FLOW:
+		case SCTP_V4_FLOW:
+		case AH_ESP_V4_FLOW:
+		case IPV4_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV4)
+				info->data |= RXH_IP_SRC | RXH_IP_DST;
+			break;
+		case TCP_V6_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV6_TCP)
+				info->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3;
+			/* fall through */
+		case UDP_V6_FLOW:
+		case SCTP_V6_FLOW:
+		case AH_ESP_V6_FLOW:
+		case IPV6_FLOW:
+			if (mrqc & E1000_MRQC_RSS_FIELD_IPV6)
+				info->data |= RXH_IP_SRC | RXH_IP_DST;
+			break;
+		default:
+			break;
+		}
+		return 0;
+	}
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
@@ -1981,6 +2049,7 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_sset_count		= e1000e_get_sset_count,
 	.get_coalesce		= e1000_get_coalesce,
 	.set_coalesce		= e1000_set_coalesce,
+	.get_rxnfc		= e1000_get_rxnfc,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)