Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 46 insertions, 9 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index 20e93b08e7f..ff796e42c3e 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   Intel PRO/1000 Linux driver
-  Copyright(c) 1999 - 2011 Intel Corporation.
+  Copyright(c) 1999 - 2012 Intel Corporation.
 
   This program is free software; you can redistribute it and/or modify it
   under the terms and conditions of the GNU General Public License,
@@ -113,11 +113,20 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 #define MAX_ITR 100000
 #define MIN_ITR 100
 
-/* IntMode (Interrupt Mode)
+/*
+ * IntMode (Interrupt Mode)
+ *
+ * Valid Range: varies depending on kernel configuration & hardware support
+ *
+ * legacy=0, MSI=1, MSI-X=2
  *
- * Valid Range: 0 - 2
+ * When MSI/MSI-X support is enabled in kernel-
+ *   Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
+ * When MSI/MSI-X support is not enabled in kernel-
+ *   Default Value: 0 (legacy)
  *
- * Default Value: 2 (MSI-X)
+ * When a mode is specified that is not allowed/supported, it will be
+ * demoted to the most advanced interrupt mode available.
  */
 E1000_PARAM(IntMode, "Interrupt Mode");
 #define MAX_INTMODE	2
@@ -388,12 +397,33 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 		static struct e1000_option opt = {
 			.type = range_option,
 			.name = "Interrupt Mode",
-			.err  = "defaulting to 2 (MSI-X)",
-			.def  = E1000E_INT_MODE_MSIX,
-			.arg  = { .r = { .min = MIN_INTMODE,
-					 .max = MAX_INTMODE } }
+#ifndef CONFIG_PCI_MSI
+			.err  = "defaulting to 0 (legacy)",
+			.def  = E1000E_INT_MODE_LEGACY,
+			.arg  = { .r = { .min = 0,
+					 .max = 0 } }
+#endif
 		};
 
+#ifdef CONFIG_PCI_MSI
+		if (adapter->flags & FLAG_HAS_MSIX) {
+			opt.err = kstrdup("defaulting to 2 (MSI-X)",
+					  GFP_KERNEL);
+			opt.def = E1000E_INT_MODE_MSIX;
+			opt.arg.r.max = E1000E_INT_MODE_MSIX;
+		} else {
+			opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
+			opt.def = E1000E_INT_MODE_MSI;
+			opt.arg.r.max = E1000E_INT_MODE_MSI;
+		}
+
+		if (!opt.err) {
+			dev_err(&adapter->pdev->dev,
+				"Failed to allocate memory\n");
+			return;
+		}
+#endif
+
 		if (num_IntMode > bd) {
 			unsigned int int_mode = IntMode[bd];
 			e1000_validate_option(&int_mode, &opt, adapter);
@@ -401,6 +431,10 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 		} else {
 			adapter->int_mode = opt.def;
 		}
+
+#ifdef CONFIG_PCI_MSI
+		kfree(opt.err);
+#endif
 	}
 	{ /* Smart Power Down */
 		static const struct e1000_option opt = {
@@ -429,10 +463,13 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 		if (num_CrcStripping > bd) {
 			unsigned int crc_stripping = CrcStripping[bd];
 			e1000_validate_option(&crc_stripping, &opt, adapter);
-			if (crc_stripping == OPTION_ENABLED)
+			if (crc_stripping == OPTION_ENABLED) {
 				adapter->flags2 |= FLAG2_CRC_STRIPPING;
+				adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
+			}
 		} else {
 			adapter->flags2 |= FLAG2_CRC_STRIPPING;
+			adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
 		}
 	}
 	{ /* Kumeran Lock Loss Workaround */