e1000e: add ethtool .get_eee/.set_eee

Add the ability to query and set Energy Efficient Ethernet parameters via
ethtool for applicable devices.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

5 files changed, 167 insertions, 23 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h
index 7326ea2fef8..3041a54e3a6 100644
--- a/drivers/net/ethernet/intel/e1000e/defines.h
+++ b/drivers/net/ethernet/intel/e1000e/defines.h
@@ -383,6 +383,9 @@
 
 #define E1000_KABGTXD_BGSQLBIAS           0x00050000
 
+/* Low Power IDLE Control */
+#define E1000_LPIC_LPIET_SHIFT		24	/* Low Power Idle Entry Time */
+
 /* PBA constants */
 #define E1000_PBA_8K  0x0008    /* 8KB */
 #define E1000_PBA_16K 0x0010    /* 16KB */
@@ -799,6 +802,33 @@
 /* BME1000 PHY Specific Control Register */
 #define BME1000_PSCR_ENABLE_DOWNSHIFT   0x0800 /* 1 = enable downshift */
 
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL				PHY_REG(772, 20)
+#define I82579_LPI_CTRL_100_ENABLE		0x2000
+#define I82579_LPI_CTRL_1000_ENABLE		0x4000
+#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
+#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
+
+/* Extended Management Interface (EMI) Registers */
+#define I82579_EMI_ADDR		0x10
+#define I82579_EMI_DATA		0x11
+#define I82579_LPI_UPDATE_TIMER	0x4805	/* in 40ns units + 40 ns base value */
+#define I82579_MSE_THRESHOLD	0x084F	/* 82579 Mean Square Error Threshold */
+#define I82577_MSE_THRESHOLD	0x0887	/* 82577 Mean Square Error Threshold */
+#define I82579_MSE_LINK_DOWN	0x2411	/* MSE count before dropping link */
+#define I82579_EEE_PCS_STATUS	0x182D	/* IEEE MMD Register 3.1 >> 8 */
+#define I82579_EEE_CAPABILITY	0x0410	/* IEEE MMD Register 3.20 */
+#define I82579_EEE_ADVERTISEMENT	0x040E	/* IEEE MMD Register 7.60 */
+#define I82579_EEE_LP_ABILITY		0x040F	/* IEEE MMD Register 7.61 */
+#define I82579_EEE_100_SUPPORTED	(1 << 1) /* 100BaseTx EEE supported */
+#define I82579_EEE_1000_SUPPORTED	(1 << 2) /* 1000BaseTx EEE supported */
+#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */
+#define I217_EEE_CAPABILITY	0x8000	/* IEEE MMD Register 3.20 */
+#define I217_EEE_ADVERTISEMENT	0x8001	/* IEEE MMD Register 7.60 */
+#define I217_EEE_LP_ABILITY	0x8002	/* IEEE MMD Register 7.61 */
+
+#define E1000_EEE_RX_LPI_RCVD	0x0400	/* Tx LP idle received */
+#define E1000_EEE_TX_LPI_RCVD	0x0800	/* Rx LP idle received */
 
 #define PHY_PAGE_SHIFT 5
 #define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index 3f8bbc31795..b89b181da7b 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -659,6 +659,7 @@ extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
 extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
 extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
 extern bool e1000_check_phy_82574(struct e1000_hw *hw);
+extern s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
 
 static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
 {
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index 2225603a8a2..636ba09ca6f 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -35,6 +35,7 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/vmalloc.h>
+#include <linux/mdio.h>
 
 #include "e1000.h"
 
@@ -2050,6 +2051,137 @@ static int e1000_get_rxnfc(struct net_device *netdev,
 	}
 }
 
+static int e1000e_get_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	u16 cap_addr, adv_addr, lpa_addr, pcs_stat_addr, phy_data, lpi_ctrl;
+	u32 status, ret_val;
+
+	if (!(adapter->flags & FLAG_IS_ICH) ||
+	    !(adapter->flags2 & FLAG2_HAS_EEE))
+		return -EOPNOTSUPP;
+
+	switch (hw->phy.type) {
+	case e1000_phy_82579:
+		cap_addr = I82579_EEE_CAPABILITY;
+		adv_addr = I82579_EEE_ADVERTISEMENT;
+		lpa_addr = I82579_EEE_LP_ABILITY;
+		pcs_stat_addr = I82579_EEE_PCS_STATUS;
+		break;
+	case e1000_phy_i217:
+		cap_addr = I217_EEE_CAPABILITY;
+		adv_addr = I217_EEE_ADVERTISEMENT;
+		lpa_addr = I217_EEE_LP_ABILITY;
+		pcs_stat_addr = I217_EEE_PCS_STATUS;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		return -EBUSY;
+
+	/* EEE Capability */
+	ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	edata->supported = mmd_eee_cap_to_ethtool_sup_t(phy_data);
+
+	/* EEE Advertised */
+	ret_val = e1000_read_emi_reg_locked(hw, adv_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	edata->advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+	/* EEE Link Partner Advertised */
+	ret_val = e1000_read_emi_reg_locked(hw, lpa_addr, &phy_data);
+	if (ret_val)
+		goto release;
+	edata->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(phy_data);
+
+	/* EEE PCS Status */
+	ret_val = e1000_read_emi_reg_locked(hw, pcs_stat_addr, &phy_data);
+	if (hw->phy.type == e1000_phy_82579)
+		phy_data <<= 8;
+
+release:
+	hw->phy.ops.release(hw);
+	if (ret_val)
+		return -ENODATA;
+
+	e1e_rphy(hw, I82579_LPI_CTRL, &lpi_ctrl);
+	status = er32(STATUS);
+
+	/* Result of the EEE auto negotiation - there is no register that
+	 * has the status of the EEE negotiation so do a best-guess based
+	 * on whether both Tx and Rx LPI indications have been received or
+	 * base it on the link speed, the EEE advertised speeds on both ends
+	 * and the speeds on which EEE is enabled locally.
+	 */
+	if (((phy_data & E1000_EEE_TX_LPI_RCVD) &&
+	     (phy_data & E1000_EEE_RX_LPI_RCVD)) ||
+	    ((status & E1000_STATUS_SPEED_100) &&
+	     (edata->advertised & ADVERTISED_100baseT_Full) &&
+	     (edata->lp_advertised & ADVERTISED_100baseT_Full) &&
+	     (lpi_ctrl & I82579_LPI_CTRL_100_ENABLE)) ||
+	    ((status & E1000_STATUS_SPEED_1000) &&
+	     (edata->advertised & ADVERTISED_1000baseT_Full) &&
+	     (edata->lp_advertised & ADVERTISED_1000baseT_Full) &&
+	     (lpi_ctrl & I82579_LPI_CTRL_1000_ENABLE)))
+		edata->eee_active = true;
+
+	edata->eee_enabled = !hw->dev_spec.ich8lan.eee_disable;
+	edata->tx_lpi_enabled = true;
+	edata->tx_lpi_timer = er32(LPIC) >> E1000_LPIC_LPIET_SHIFT;
+
+	return 0;
+}
+
+static int e1000e_set_eee(struct net_device *netdev, struct ethtool_eee *edata)
+{
+	struct e1000_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct ethtool_eee eee_curr;
+	s32 ret_val;
+
+	if (!(adapter->flags & FLAG_IS_ICH) ||
+	    !(adapter->flags2 & FLAG2_HAS_EEE))
+		return -EOPNOTSUPP;
+
+	ret_val = e1000e_get_eee(netdev, &eee_curr);
+	if (ret_val)
+		return ret_val;
+
+	if (eee_curr.advertised != edata->advertised) {
+		e_err("Setting EEE advertisement is not supported\n");
+		return -EINVAL;
+	}
+
+	if (eee_curr.tx_lpi_enabled != edata->tx_lpi_enabled) {
+		e_err("Setting EEE tx-lpi is not supported\n");
+		return -EINVAL;
+	}
+
+	if (eee_curr.tx_lpi_timer != edata->tx_lpi_timer) {
+		e_err("Setting EEE Tx LPI timer is not supported\n");
+		return -EINVAL;
+	}
+
+	if (hw->dev_spec.ich8lan.eee_disable != !edata->eee_enabled) {
+		hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
+
+		/* reset the link */
+		if (netif_running(netdev))
+			e1000e_reinit_locked(adapter);
+		else
+			e1000e_reset(adapter);
+	}
+
+	return 0;
+}
+
 static const struct ethtool_ops e1000_ethtool_ops = {
 	.get_settings		= e1000_get_settings,
 	.set_settings		= e1000_set_settings,
@@ -2078,6 +2210,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
 	.set_coalesce		= e1000_set_coalesce,
 	.get_rxnfc		= e1000_get_rxnfc,
 	.get_ts_info		= ethtool_op_get_ts_info,
+	.get_eee		= e1000e_get_eee,
+	.set_eee		= e1000e_set_eee,
 };
 
 void e1000e_set_ethtool_ops(struct net_device *netdev)
diff --git a/drivers/net/ethernet/intel/e1000e/hw.h b/drivers/net/ethernet/intel/e1000e/hw.h
index 06239fe47db..81afad5b80f 100644
--- a/drivers/net/ethernet/intel/e1000e/hw.h
+++ b/drivers/net/ethernet/intel/e1000e/hw.h
@@ -62,6 +62,7 @@ enum e1e_registers {
 	E1000_IVAR     = 0x000E4, /* Interrupt Vector Allocation - RW */
 	E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
 #define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
+	E1000_LPIC     = 0x000FC, /* Low Power Idle Control - RW */
 	E1000_RCTL     = 0x00100, /* Rx Control - RW */
 	E1000_FCTTV    = 0x00170, /* Flow Control Transmit Timer Value - RW */
 	E1000_TXCW     = 0x00178, /* Tx Configuration Word - RW */
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 051dfda75fc..3829f7fd1d9 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -148,28 +148,6 @@
 #define HV_PM_CTRL		PHY_REG(770, 17)
 #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA	0x100
 
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL				PHY_REG(772, 20)
-#define I82579_LPI_CTRL_100_ENABLE		0x2000
-#define I82579_LPI_CTRL_1000_ENABLE		0x4000
-#define I82579_LPI_CTRL_ENABLE_MASK		0x6000
-#define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT	0x80
-
-/* Extended Management Interface (EMI) Registers */
-#define I82579_EMI_ADDR         0x10
-#define I82579_EMI_DATA         0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805	/* in 40ns units + 40 ns base value */
-#define I82579_MSE_THRESHOLD    0x084F	/* 82579 Mean Square Error Threshold */
-#define I82577_MSE_THRESHOLD    0x0887	/* 82577 Mean Square Error Threshold */
-#define I82579_MSE_LINK_DOWN    0x2411	/* MSE count before dropping link */
-#define I82579_EEE_PCS_STATUS	0x182D	/* IEEE MMD Register 3.1 >> 8 */
-#define I82579_EEE_LP_ABILITY	0x040F	/* IEEE MMD Register 7.61 */
-#define I82579_EEE_100_SUPPORTED	(1 << 1) /* 100BaseTx EEE supported */
-#define I82579_EEE_1000_SUPPORTED	(1 << 2) /* 1000BaseTx EEE supported */
-#define I217_EEE_PCS_STATUS	0x9401	/* IEEE MMD Register 3.1 */
-#define I217_EEE_ADVERTISEMENT  0x8001	/* IEEE MMD Register 7.60 */
-#define I217_EEE_LP_ABILITY     0x8002	/* IEEE MMD Register 7.61 */
-
 /* Intel Rapid Start Technology Support */
 #define I217_PROXY_CTRL                 BM_PHY_REG(BM_WUC_PAGE, 70)
 #define I217_PROXY_CTRL_AUTO_DISABLE    0x0080
@@ -829,7 +807,7 @@ static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
  *
  *  Assumes the SW/FW/HW Semaphore is already acquired.
  **/
-static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
+s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
 {
 	return __e1000_access_emi_reg_locked(hw, addr, data, true);
 }