summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
diff options
context:
space:
mode:
authorShannon Nelson <shannon.nelson@intel.com>2014-07-09 07:46:09 +0000
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2014-07-24 03:32:40 -0700
commitcd552cb49e9ad5fd8748fb6b38a8bd38e9e4d86c (patch)
treef83278a853151b9370e542d5092df9c2862982b8 /drivers/net/ethernet/intel/i40e/i40e_ethtool.c
parentefe1ac25d084fd56c5b809634a0444606c2a5cd3 (diff)
i40e/i40evf: Add nvmupdate support
This implements a state machine intended to support the userland tool for updating the device eeprom. The state machine implements one-shot reads, writes, multi-step write sessions, and checksum requests. If we're in the middle of a multi-step write session, no one should fire off other writes, however, one shot reads are valid. The userland tool is expected to keep track of its session status, arrange the placement and ordering of the writes, and deal with the checksum requirement. This patch also adds nvmupdate support to ethtool callbacks. The get_eeprom() and set_eeprom() services in ethtool are used here to facilitate the userland NVMUpdate tool. The 'magic' value in the get and set commands is used to pass additional control information for managing the read and write steps. The read operation works both as normally expected in the standard ethtool method, as well as with the extra NVM controls. The write operation works only for the expanded NVM functions - the normal ethtool method is not allowed because of the NVM semaphore management needed for multipart writes, as well as the checksum requirement. Change-ID: I1d84a170153a9f437906744e2e350fd68fe7563d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_ethtool.c')
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_ethtool.c61
1 files changed, 59 insertions, 2 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 3abd3cbab75..f1d241ec1fc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -759,10 +759,33 @@ static int i40e_get_eeprom(struct net_device *netdev,
u8 *eeprom_buff;
u16 i, sectors;
bool last;
+ u32 magic;
+
#define I40E_NVM_SECTOR_SIZE 4096
if (eeprom->len == 0)
return -EINVAL;
+ /* check for NVMUpdate access method */
+ magic = hw->vendor_id | (hw->device_id << 16);
+ if (eeprom->magic && eeprom->magic != magic) {
+ int errno;
+
+ /* make sure it is the right magic for NVMUpdate */
+ if ((eeprom->magic >> 16) != hw->device_id)
+ return -EINVAL;
+
+ ret_val = i40e_nvmupd_command(hw,
+ (struct i40e_nvm_access *)eeprom,
+ bytes, &errno);
+ if (ret_val)
+ dev_info(&pf->pdev->dev,
+ "NVMUpdate read failed err=%d status=0x%x\n",
+ ret_val, hw->aq.asq_last_status);
+
+ return errno;
+ }
+
+ /* normal ethtool get_eeprom support */
eeprom->magic = hw->vendor_id | (hw->device_id << 16);
eeprom_buff = kzalloc(eeprom->len, GFP_KERNEL);
@@ -789,7 +812,7 @@ static int i40e_get_eeprom(struct net_device *netdev,
ret_val = i40e_aq_read_nvm(hw, 0x0,
eeprom->offset + (I40E_NVM_SECTOR_SIZE * i),
len,
- eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
+ (u8 *)eeprom_buff + (I40E_NVM_SECTOR_SIZE * i),
last, NULL);
if (ret_val) {
dev_info(&pf->pdev->dev,
@@ -801,7 +824,7 @@ static int i40e_get_eeprom(struct net_device *netdev,
release_nvm:
i40e_release_nvm(hw);
- memcpy(bytes, eeprom_buff, eeprom->len);
+ memcpy(bytes, (u8 *)eeprom_buff, eeprom->len);
free_buff:
kfree(eeprom_buff);
return ret_val;
@@ -821,6 +844,39 @@ static int i40e_get_eeprom_len(struct net_device *netdev)
return val;
}
+static int i40e_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_hw *hw = &np->vsi->back->hw;
+ struct i40e_pf *pf = np->vsi->back;
+ int ret_val = 0;
+ int errno;
+ u32 magic;
+
+ /* normal ethtool set_eeprom is not supported */
+ magic = hw->vendor_id | (hw->device_id << 16);
+ if (eeprom->magic == magic)
+ return -EOPNOTSUPP;
+
+ /* check for NVMUpdate access method */
+ if (!eeprom->magic || (eeprom->magic >> 16) != hw->device_id)
+ return -EINVAL;
+
+ if (test_bit(__I40E_RESET_RECOVERY_PENDING, &pf->state) ||
+ test_bit(__I40E_RESET_INTR_RECEIVED, &pf->state))
+ return -EBUSY;
+
+ ret_val = i40e_nvmupd_command(hw, (struct i40e_nvm_access *)eeprom,
+ bytes, &errno);
+ if (ret_val)
+ dev_info(&pf->pdev->dev,
+ "NVMUpdate write failed err=%d status=0x%x\n",
+ ret_val, hw->aq.asq_last_status);
+
+ return errno;
+}
+
static void i40e_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
{
@@ -2094,6 +2150,7 @@ static const struct ethtool_ops i40e_ethtool_ops = {
.get_link = ethtool_op_get_link,
.get_wol = i40e_get_wol,
.set_wol = i40e_set_wol,
+ .set_eeprom = i40e_set_eeprom,
.get_eeprom_len = i40e_get_eeprom_len,
.get_eeprom = i40e_get_eeprom,
.get_ringparam = i40e_get_ringparam,