i40e: Resume Port Tx after DCB event

When there are DCB configuration changes based on DCBX the firmware suspends
the port's Tx and generates an event to the PF. The PF is then responsible
to reconfigure the PF VSIs and switching topology as per the updated DCB
configuration and then resume the port's Tx by calling the "Resume Port Tx"
AQ command.

This patch adds this call to the flow that handles DCB re-configuration in
the PF.

Change-ID: I5b860ad48abfbf379b003143c4d3453e2ed5cc1c
Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-By: Jack Morgan <jack.morgan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 30 insertions, 1 deletions

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 68c19c87ebe..185f977e8a9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4382,6 +4382,31 @@ static void i40e_dcb_reconfigure(struct i40e_pf *pf)
 }
 
 /**
+ * i40e_resume_port_tx - Resume port Tx
+ * @pf: PF struct
+ *
+ * Resume a port's Tx and issue a PF reset in case of failure to
+ * resume.
+ **/
+static int i40e_resume_port_tx(struct i40e_pf *pf)
+{
+	struct i40e_hw *hw = &pf->hw;
+	int ret;
+
+	ret = i40e_aq_resume_port_tx(hw, NULL);
+	if (ret) {
+		dev_info(&pf->pdev->dev,
+			 "AQ command Resume Port Tx failed = %d\n",
+			  pf->hw.aq.asq_last_status);
+		/* Schedule PF reset to recover */
+		set_bit(__I40E_PF_RESET_REQUESTED, &pf->state);
+		i40e_service_event_schedule(pf);
+	}
+
+	return ret;
+}
+
+/**
  * i40e_init_pf_dcb - Initialize DCB configuration
  * @pf: PF being configured
  *
@@ -5075,7 +5100,11 @@ static int i40e_handle_lldp_event(struct i40e_pf *pf,
 	/* Changes in configuration update VEB/VSI */
 	i40e_dcb_reconfigure(pf);
 
-	i40e_pf_unquiesce_all_vsi(pf);
+	ret = i40e_resume_port_tx(pf);
+
+	/* In case of error no point in resuming VSIs */
+	if (!ret)
+		i40e_pf_unquiesce_all_vsi(pf);
 exit:
 	return ret;
 }