intel: Move the Intel wired LAN drivers

Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and
the necessary Kconfig and Makefile changes.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

1 files changed, 2263 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
new file mode 100644
index 00000000000..34f30ec79c2
--- /dev/null
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c
@@ -0,0 +1,2263 @@
+/*******************************************************************************
+
+  Intel 10 Gigabit PCI Express Linux driver
+  Copyright(c) 1999 - 2011 Intel Corporation.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms and conditions of the GNU General Public License,
+  version 2, as published by the Free Software Foundation.
+
+  This program is distributed in the hope it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc.,
+  51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+  The full GNU General Public License is included in this distribution in
+  the file called "COPYING".
+
+  Contact Information:
+  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_mbx.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES   128
+#define IXGBE_82599_MC_TBL_SIZE   128
+#define IXGBE_82599_VFT_TBL_SIZE  128
+#define IXGBE_82599_RX_PB_SIZE	  512
+
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+						 ixgbe_link_speed speed,
+						 bool autoneg,
+						 bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+                                           ixgbe_link_speed speed,
+                                           bool autoneg,
+                                           bool autoneg_wait_to_complete);
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+				      bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+                               ixgbe_link_speed speed,
+                               bool autoneg,
+                               bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+                                         ixgbe_link_speed speed,
+                                         bool autoneg,
+                                         bool autoneg_wait_to_complete);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+
+static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	/* enable the laser control functions for SFP+ fiber */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+		mac->ops.disable_tx_laser =
+		                       &ixgbe_disable_tx_laser_multispeed_fiber;
+		mac->ops.enable_tx_laser =
+		                        &ixgbe_enable_tx_laser_multispeed_fiber;
+		mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
+	} else {
+		mac->ops.disable_tx_laser = NULL;
+		mac->ops.enable_tx_laser = NULL;
+		mac->ops.flap_tx_laser = NULL;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		/* Set up dual speed SFP+ support */
+		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+	} else {
+		if ((mac->ops.get_media_type(hw) ==
+		     ixgbe_media_type_backplane) &&
+		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+		     hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+		     !ixgbe_verify_lesm_fw_enabled_82599(hw))
+			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+		else
+			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+	}
+}
+
+static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+	u32 reg_anlp1 = 0;
+	u32 i = 0;
+	u16 list_offset, data_offset, data_value;
+
+	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+		ixgbe_init_mac_link_ops_82599(hw);
+
+		hw->phy.ops.reset = NULL;
+
+		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+		                                              &data_offset);
+		if (ret_val != 0)
+			goto setup_sfp_out;
+
+		/* PHY config will finish before releasing the semaphore */
+		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+		                                        IXGBE_GSSR_MAC_CSR_SM);
+		if (ret_val != 0) {
+			ret_val = IXGBE_ERR_SWFW_SYNC;
+			goto setup_sfp_out;
+		}
+
+		hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+		while (data_value != 0xffff) {
+			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+			IXGBE_WRITE_FLUSH(hw);
+			hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+		}
+
+		/* Release the semaphore */
+		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+		/*
+		 * Delay obtaining semaphore again to allow FW access,
+		 * semaphore_delay is in ms usleep_range needs us.
+		 */
+		usleep_range(hw->eeprom.semaphore_delay * 1000,
+			     hw->eeprom.semaphore_delay * 2000);
+
+		/* Now restart DSP by setting Restart_AN and clearing LMS */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
+		                IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
+		                IXGBE_AUTOC_AN_RESTART));
+
+		/* Wait for AN to leave state 0 */
+		for (i = 0; i < 10; i++) {
+			usleep_range(4000, 8000);
+			reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+			if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
+				break;
+		}
+		if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+			hw_dbg(hw, "sfp module setup not complete\n");
+			ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+			goto setup_sfp_out;
+		}
+
+		/* Restart DSP by setting Restart_AN and return to SFI mode */
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+		                IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
+		                IXGBE_AUTOC_AN_RESTART));
+	}
+
+setup_sfp_out:
+	return ret_val;
+}
+
+static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+
+	ixgbe_init_mac_link_ops_82599(hw);
+
+	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize any function pointers that were not able to be
+ *  set during get_invariants because the PHY/SFP type was
+ *  not known.  Perform the SFP init if necessary.
+ *
+ **/
+static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+	struct ixgbe_mac_info *mac = &hw->mac;
+	struct ixgbe_phy_info *phy = &hw->phy;
+	s32 ret_val = 0;
+
+	/* Identify the PHY or SFP module */
+	ret_val = phy->ops.identify(hw);
+
+	/* Setup function pointers based on detected SFP module and speeds */
+	ixgbe_init_mac_link_ops_82599(hw);
+
+	/* If copper media, overwrite with copper function pointers */
+	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+		mac->ops.get_link_capabilities =
+			&ixgbe_get_copper_link_capabilities_generic;
+	}
+
+	/* Set necessary function pointers based on phy type */
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+		phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+		phy->ops.get_firmware_version =
+		             &ixgbe_get_phy_firmware_version_tnx;
+		break;
+	case ixgbe_phy_aq:
+		phy->ops.get_firmware_version =
+			&ixgbe_get_phy_firmware_version_generic;
+		break;
+	default:
+		break;
+	}
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @negotiation: true when autoneg or autotry is enabled
+ *
+ *  Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+                                             ixgbe_link_speed *speed,
+                                             bool *negotiation)
+{
+	s32 status = 0;
+	u32 autoc = 0;
+
+	/* Determine 1G link capabilities off of SFP+ type */
+	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+		goto out;
+	}
+
+	/*
+	 * Determine link capabilities based on the stored value of AUTOC,
+	 * which represents EEPROM defaults.  If AUTOC value has not been
+	 * stored, use the current register value.
+	 */
+	if (hw->mac.orig_link_settings_stored)
+		autoc = hw->mac.orig_autoc;
+	else
+		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*negotiation = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*negotiation = false;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+		*speed = IXGBE_LINK_SPEED_100_FULL;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+		break;
+
+	case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+		*negotiation = false;
+		break;
+
+	default:
+		status = IXGBE_ERR_LINK_SETUP;
+		goto out;
+		break;
+	}
+
+	if (hw->phy.multispeed_fiber) {
+		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
+		          IXGBE_LINK_SPEED_1GB_FULL;
+		*negotiation = true;
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_media_type_82599 - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	/* Detect if there is a copper PHY attached. */
+	switch (hw->phy.type) {
+	case ixgbe_phy_cu_unknown:
+	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
+		media_type = ixgbe_media_type_copper;
+		goto out;
+	default:
+		break;
+	}
+
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82599_KX4:
+	case IXGBE_DEV_ID_82599_KX4_MEZZ:
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+	case IXGBE_DEV_ID_82599_KR:
+	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+	case IXGBE_DEV_ID_82599_XAUI_LOM:
+		/* Default device ID is mezzanine card KX/KX4 */
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_FCOE:
+	case IXGBE_DEV_ID_82599_SFP_EM:
+	case IXGBE_DEV_ID_82599_SFP_SF2:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_82599_CX4:
+		media_type = ixgbe_media_type_cx4;
+		break;
+	case IXGBE_DEV_ID_82599_T3_LOM:
+		media_type = ixgbe_media_type_copper;
+		break;
+	case IXGBE_DEV_ID_82599_LS:
+		media_type = ixgbe_media_type_fiber_lco;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+out:
+	return media_type;
+}
+
+/**
+ *  ixgbe_start_mac_link_82599 - Setup MAC link settings
+ *  @hw: pointer to hardware structure
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+                               bool autoneg_wait_to_complete)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = 0;
+
+	/* Restart link */
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (autoneg_wait_to_complete) {
+		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+		     IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msleep(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				hw_dbg(hw, "Autoneg did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msleep(50);
+
+	return status;
+}
+
+/**
+ *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively shutting down the Tx
+ *  laser on the PHY, effectively halting physical link.
+ **/
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Disable tx laser; allow 100us to go dark per spec */
+	esdp_reg |= IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(100);
+}
+
+/**
+ *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  The base drivers may require better control over SFP+ module
+ *  PHY states.  This includes selectively turning on the Tx
+ *  laser on the PHY, effectively starting physical link.
+ **/
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+	/* Enable tx laser; allow 100ms to light up */
+	esdp_reg &= ~IXGBE_ESDP_SDP3;
+	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+	IXGBE_WRITE_FLUSH(hw);
+	msleep(100);
+}
+
+/**
+ *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ *  @hw: pointer to hardware structure
+ *
+ *  When the driver changes the link speeds that it can support,
+ *  it sets autotry_restart to true to indicate that we need to
+ *  initiate a new autotry session with the link partner.  To do
+ *  so, we set the speed then disable and re-enable the tx laser, to
+ *  alert the link partner that it also needs to restart autotry on its
+ *  end.  This is consistent with true clause 37 autoneg, which also
+ *  involves a loss of signal.
+ **/
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+	if (hw->mac.autotry_restart) {
+		ixgbe_disable_tx_laser_multispeed_fiber(hw);
+		ixgbe_enable_tx_laser_multispeed_fiber(hw);
+		hw->mac.autotry_restart = false;
+	}
+}
+
+/**
+ *  ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+                                          ixgbe_link_speed speed,
+                                          bool autoneg,
+                                          bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	u32 speedcnt = 0;
+	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+	u32 i = 0;
+	bool link_up = false;
+	bool negotiation;
+
+	/* Mask off requested but non-supported speeds */
+	status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
+						   &negotiation);
+	if (status != 0)
+		return status;
+
+	speed &= link_speed;
+
+	/*
+	 * Try each speed one by one, highest priority first.  We do this in
+	 * software because 10gb fiber doesn't support speed autonegotiation.
+	 */
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		speedcnt++;
+		highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+		IXGBE_WRITE_FLUSH(hw);
+
+		/* Allow module to change analog characteristics (1G->10G) */
+		msleep(40);
+
+		status = ixgbe_setup_mac_link_82599(hw,
+						    IXGBE_LINK_SPEED_10GB_FULL,
+						    autoneg,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			return status;
+
+		/* Flap the tx laser if it has not already been done */
+		hw->mac.ops.flap_tx_laser(hw);
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted.  82599 uses the same timing for 10g SFI.
+		 */
+		for (i = 0; i < 5; i++) {
+			/* Wait for the link partner to also set speed */
+			msleep(100);
+
+			/* If we have link, just jump out */
+			status = hw->mac.ops.check_link(hw, &link_speed,
+							&link_up, false);
+			if (status != 0)
+				return status;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		speedcnt++;
+		if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+			highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+		/* If we already have link at this speed, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+			goto out;
+
+		/* Set the module link speed */
+		esdp_reg &= ~IXGBE_ESDP_SDP5;
+		esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+		IXGBE_WRITE_FLUSH(hw);
+
+		/* Allow module to change analog characteristics (10G->1G) */
+		msleep(40);
+
+		status = ixgbe_setup_mac_link_82599(hw,
+						    IXGBE_LINK_SPEED_1GB_FULL,
+						    autoneg,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			return status;
+
+		/* Flap the tx laser if it has not already been done */
+		hw->mac.ops.flap_tx_laser(hw);
+
+		/* Wait for the link partner to also set speed */
+		msleep(100);
+
+		/* If we have link, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+						false);
+		if (status != 0)
+			return status;
+
+		if (link_up)
+			goto out;
+	}
+
+	/*
+	 * We didn't get link.  Configure back to the highest speed we tried,
+	 * (if there was more than one).  We call ourselves back with just the
+	 * single highest speed that the user requested.
+	 */
+	if (speedcnt > 1)
+		status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+		                                               highest_link_speed,
+		                                               autoneg,
+		                                               autoneg_wait_to_complete);
+
+out:
+	/* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Implements the Intel SmartSpeed algorithm.
+ **/
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+	s32 i, j;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/*
+	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
+	 * autoneg advertisement if link is unable to be established at the
+	 * highest negotiated rate.  This can sometimes happen due to integrity
+	 * issues with the physical media connection.
+	 */
+
+	/* First, try to get link with full advertisement */
+	hw->phy.smart_speed_active = false;
+	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+		status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+						    autoneg_wait_to_complete);
+		if (status != 0)
+			goto out;
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+		 * Table 9 in the AN MAS.
+		 */
+		for (i = 0; i < 5; i++) {
+			mdelay(100);
+
+			/* If we have link, just jump out */
+			status = hw->mac.ops.check_link(hw, &link_speed,
+							&link_up, false);
+			if (status != 0)
+				goto out;
+
+			if (link_up)
+				goto out;
+		}
+	}
+
+	/*
+	 * We didn't get link.  If we advertised KR plus one of KX4/KX
+	 * (or BX4/BX), then disable KR and try again.
+	 */
+	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+		goto out;
+
+	/* Turn SmartSpeed on to disable KR support */
+	hw->phy.smart_speed_active = true;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+	if (status != 0)
+		goto out;
+
+	/*
+	 * Wait for the controller to acquire link.  600ms will allow for
+	 * the AN link_fail_inhibit_timer as well for multiple cycles of
+	 * parallel detect, both 10g and 1g. This allows for the maximum
+	 * connect attempts as defined in the AN MAS table 73-7.
+	 */
+	for (i = 0; i < 6; i++) {
+		mdelay(100);
+
+		/* If we have link, just jump out */
+		status = hw->mac.ops.check_link(hw, &link_speed,
+						&link_up, false);
+		if (status != 0)
+			goto out;
+
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Turn SmartSpeed back off. */
+	hw->phy.smart_speed_active = false;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+
+out:
+	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+		hw_dbg(hw, "Smartspeed has downgraded the link speed from "
+		       "the maximum advertised\n");
+	return status;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82599 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+                               ixgbe_link_speed speed, bool autoneg,
+                               bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 start_autoc = autoc;
+	u32 orig_autoc = 0;
+	u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 links_reg;
+	u32 i;
+	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+	/* Check to see if speed passed in is supported. */
+	hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
+	if (status != 0)
+		goto out;
+
+	speed &= link_capabilities;
+
+	if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+		status = IXGBE_ERR_LINK_SETUP;
+		goto out;
+	}
+
+	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+	if (hw->mac.orig_link_settings_stored)
+		orig_autoc = hw->mac.orig_autoc;
+	else
+		orig_autoc = autoc;
+
+	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+		/* Set KX4/KX/KR support according to speed requested */
+		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+				autoc |= IXGBE_AUTOC_KX4_SUPP;
+			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+			    (hw->phy.smart_speed_active == false))
+				autoc |= IXGBE_AUTOC_KR_SUPP;
+		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+			autoc |= IXGBE_AUTOC_KX_SUPP;
+	} else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+	           (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+	            link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+		/* Switch from 1G SFI to 10G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+		    (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+		}
+	} else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+	           (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+		/* Switch from 10G SFI to 1G SFI if requested */
+		if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+		    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+			autoc &= ~IXGBE_AUTOC_LMS_MASK;
+			if (autoneg)
+				autoc |= IXGBE_AUTOC_LMS_1G_AN;
+			else
+				autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+		}
+	}
+
+	if (autoc != start_autoc) {
+		/* Restart link */
+		autoc |= IXGBE_AUTOC_AN_RESTART;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+
+		/* Only poll for autoneg to complete if specified to do so */
+		if (autoneg_wait_to_complete) {
+			if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+				links_reg = 0; /*Just in case Autoneg time=0*/
+				for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+					links_reg =
+					       IXGBE_READ_REG(hw, IXGBE_LINKS);
+					if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+						break;
+					msleep(100);
+				}
+				if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+					status =
+					        IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+					hw_dbg(hw, "Autoneg did not "
+					       "complete.\n");
+				}
+			}
+		}
+
+		/* Add delay to filter out noises during initial link setup */
+		msleep(50);
+	}
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ *  Restarts link on PHY and MAC based on settings passed in.
+ **/
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+                                         ixgbe_link_speed speed,
+                                         bool autoneg,
+                                         bool autoneg_wait_to_complete)
+{
+	s32 status;
+
+	/* Setup the PHY according to input speed */
+	status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+	                                      autoneg_wait_to_complete);
+	/* Set up MAC */
+	ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_hw_82599 - Perform hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks
+ *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ *  reset.
+ **/
+static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+	s32 status = 0;
+	u32 ctrl;
+	u32 i;
+	u32 autoc;
+	u32 autoc2;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	hw->mac.ops.stop_adapter(hw);
+
+	/* PHY ops must be identified and initialized prior to reset */
+
+	/* Identify PHY and related function pointers */
+	status = hw->phy.ops.init(hw);
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Setup SFP module if there is one present. */
+	if (hw->phy.sfp_setup_needed) {
+		status = hw->mac.ops.setup_sfp(hw);
+		hw->phy.sfp_setup_needed = false;
+	}
+
+	if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+		goto reset_hw_out;
+
+	/* Reset PHY */
+	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+		hw->phy.ops.reset(hw);
+
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests before reset
+	 */
+	ixgbe_disable_pcie_master(hw);
+
+mac_reset_top:
+	/*
+	 * Issue global reset to the MAC.  This needs to be a SW reset.
+	 * If link reset is used, it might reset the MAC when mng is using it
+	 */
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		udelay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		hw_dbg(hw, "Reset polling failed to complete.\n");
+	}
+
+	/*
+	 * Double resets are required for recovery from certain error
+	 * conditions.  Between resets, it is necessary to stall to allow time
+	 * for any pending HW events to complete.  We use 1usec since that is
+	 * what is needed for ixgbe_disable_pcie_master().  The second reset
+	 * then clears out any effects of those events.
+	 */
+	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+		udelay(1);
+		goto mac_reset_top;
+	}
+
+	msleep(50);
+
+	/*
+	 * Store the original AUTOC/AUTOC2 values if they have not been
+	 * stored off yet.  Otherwise restore the stored original
+	 * values since the reset operation sets back to defaults.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	if (hw->mac.orig_link_settings_stored == false) {
+		hw->mac.orig_autoc = autoc;
+		hw->mac.orig_autoc2 = autoc2;
+		hw->mac.orig_link_settings_stored = true;
+	} else {
+		if (autoc != hw->mac.orig_autoc)
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+			                IXGBE_AUTOC_AN_RESTART));
+
+		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+			autoc2 |= (hw->mac.orig_autoc2 &
+			           IXGBE_AUTOC2_UPPER_MASK);
+			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+		}
+	}
+
+	/* Store the permanent mac address */
+	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table.  Also reset num_rar_entries to 128,
+	 * since we modify this value when programming the SAN MAC address.
+	 */
+	hw->mac.num_rar_entries = 128;
+	hw->mac.ops.init_rx_addrs(hw);
+
+	/* Store the permanent SAN mac address */
+	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+	/* Add the SAN MAC address to the RAR only if it's a valid address */
+	if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+		hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+		                    hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+		/* Reserve the last RAR for the SAN MAC address */
+		hw->mac.num_rar_entries--;
+	}
+
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+	                               &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+	return status;
+}
+
+/**
+ *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+	int i;
+	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+	/*
+	 * Before starting reinitialization process,
+	 * FDIRCMD.CMD must be zero.
+	 */
+	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+		if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+		      IXGBE_FDIRCMD_CMD_MASK))
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIRCMD_CMD_POLL) {
+		hw_dbg(hw, "Flow Director previous command isn't complete, "
+		       "aborting table re-initialization.\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+	                 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+	                (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+	                 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	/*
+	 * Clear FDIR Hash register to clear any leftover hashes
+	 * waiting to be programmed.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+	IXGBE_WRITE_FLUSH(hw);
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll init-done after we write FDIRCTRL register */
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		udelay(10);
+	}
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+		return IXGBE_ERR_FDIR_REINIT_FAILED;
+	}
+
+	/* Clear FDIR statistics registers (read to clear) */
+	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_set_fdir_rxpba_82599 - Initialize Flow Director Rx packet buffer
+ *  @hw: pointer to hardware structure
+ *  @pballoc: which mode to allocate filters with
+ **/
+static s32 ixgbe_set_fdir_rxpba_82599(struct ixgbe_hw *hw, const u32 pballoc)
+{
+	u32 fdir_pbsize = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
+	u32 current_rxpbsize = 0;
+	int i;
+
+	/* reserve space for Flow Director filters */
+	switch (pballoc) {
+	case IXGBE_FDIR_PBALLOC_256K:
+		fdir_pbsize -= 256 << IXGBE_RXPBSIZE_SHIFT;
+		break;
+	case IXGBE_FDIR_PBALLOC_128K:
+		fdir_pbsize -= 128 << IXGBE_RXPBSIZE_SHIFT;
+		break;
+	case IXGBE_FDIR_PBALLOC_64K:
+		fdir_pbsize -= 64 << IXGBE_RXPBSIZE_SHIFT;
+		break;
+	case IXGBE_FDIR_PBALLOC_NONE:
+	default:
+		return IXGBE_ERR_PARAM;
+	}
+
+	/* determine current RX packet buffer size */
+	for (i = 0; i < 8; i++)
+		current_rxpbsize += IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+
+	/* if there is already room for the filters do nothing */
+	if (current_rxpbsize <= fdir_pbsize)
+		return 0;
+
+	if (current_rxpbsize > hw->mac.rx_pb_size) {
+		/*
+		 * if rxpbsize is greater than max then HW max the Rx buffer
+		 * sizes are unconfigured or misconfigured since HW default is
+		 * to give the full buffer to each traffic class resulting in
+		 * the total size being buffer size 8x actual size
+		 *
+		 * This assumes no DCB since the RXPBSIZE registers appear to
+		 * be unconfigured.
+		 */
+		IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), fdir_pbsize);
+		for (i = 1; i < 8; i++)
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+	} else {
+		/*
+		 * Since the Rx packet buffer appears to have already been
+		 * configured we need to shrink each packet buffer by enough
+		 * to make room for the filters.  As such we take each rxpbsize
+		 * value and multiply it by a fraction representing the size
+		 * needed over the size we currently have.
+		 *
+		 * We need to reduce fdir_pbsize and current_rxpbsize to
+		 * 1/1024 of their original values in order to avoid
+		 * overflowing the u32 being used to store rxpbsize.
+		 */
+		fdir_pbsize >>= IXGBE_RXPBSIZE_SHIFT;
+		current_rxpbsize >>= IXGBE_RXPBSIZE_SHIFT;
+		for (i = 0; i < 8; i++) {
+			u32 rxpbsize = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+			rxpbsize *= fdir_pbsize;
+			rxpbsize /= current_rxpbsize;
+			IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpbsize);
+		}
+	}
+
+	return 0;
+}
+
+/**
+ *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register
+ **/
+static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	int i;
+
+	/* Prime the keys for hashing */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+	/*
+	 * Poll init-done after we write the register.  Estimated times:
+	 *      10G: PBALLOC = 11b, timing is 60us
+	 *       1G: PBALLOC = 11b, timing is 600us
+	 *     100M: PBALLOC = 11b, timing is 6ms
+	 *
+	 *     Multiple these timings by 4 if under full Rx load
+	 *
+	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
+	 * this might not finish in our poll time, but we can live with that
+	 * for now.
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+	IXGBE_WRITE_FLUSH(hw);
+	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+		                   IXGBE_FDIRCTRL_INIT_DONE)
+			break;
+		usleep_range(1000, 2000);
+	}
+
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+		hw_dbg(hw, "Flow Director poll time exceeded!\n");
+}
+
+/**
+ *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *             contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	s32 err;
+
+	/* Before enabling Flow Director, verify the Rx Packet Buffer size */
+	err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
+	if (err)
+		return err;
+
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 filters are left
+	 */
+	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ *  @hw: pointer to hardware structure
+ *  @fdirctrl: value to write to flow director control register, initially
+ *             contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+	s32 err;
+
+	/* Before enabling Flow Director, verify the Rx Packet Buffer size */
+	err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
+	if (err)
+		return err;
+
+	/*
+	 * Continue setup of fdirctrl register bits:
+	 *  Turn perfect match filtering on
+	 *  Report hash in RSS field of Rx wb descriptor
+	 *  Initialize the drop queue
+	 *  Move the flexible bytes to use the ethertype - shift 6 words
+	 *  Set the maximum length per hash bucket to 0xA filters
+	 *  Send interrupt when 64 (0x4 * 16) filters are left
+	 */
+	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+		    IXGBE_FDIRCTRL_REPORT_STATUS |
+		    (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+		    (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+	/* write hashes and fdirctrl register, poll for completion */
+	ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+	return 0;
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+		(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+		common_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+		sig_hash ^= lo_hash_dword << (16 - n); \
+	if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+		common_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+		sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0);
+
+/**
+ *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ *  @stream: input bitstream to compute the hash on
+ *
+ *  This function is almost identical to the function above but contains
+ *  several optomizations such as unwinding all of the loops, letting the
+ *  compiler work out all of the conditional ifs since the keys are static
+ *  defines, and computing two keys at once since the hashed dword stream
+ *  will be the same for both keys.
+ **/
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+					    union ixgbe_atr_hash_dword common)
+{
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(input.dword);
+
+	/* generate common hash dword */
+	hi_hash_dword = ntohl(common.dword);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+	/* combine common_hash result with signature and bucket hashes */
+	bucket_hash ^= common_hash;
+	bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+	sig_hash ^= common_hash << 16;
+	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+	/* return completed signature hash */
+	return sig_hash ^ bucket_hash;
+}
+
+/**
+ *  ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ *  @hw: pointer to hardware structure
+ *  @input: unique input dword
+ *  @common: compressed common input dword
+ *  @queue: queue index to direct traffic to
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+                                          union ixgbe_atr_hash_dword input,
+                                          union ixgbe_atr_hash_dword common,
+                                          u8 queue)
+{
+	u64  fdirhashcmd;
+	u32  fdircmd;
+
+	/*
+	 * Get the flow_type in order to program FDIRCMD properly
+	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+	 */
+	switch (input.formatted.flow_type) {
+	case IXGBE_ATR_FLOW_TYPE_TCPV4:
+	case IXGBE_ATR_FLOW_TYPE_UDPV4:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+	case IXGBE_ATR_FLOW_TYPE_TCPV6:
+	case IXGBE_ATR_FLOW_TYPE_UDPV6:
+	case IXGBE_ATR_FLOW_TYPE_SCTPV6:
+		break;
+	default:
+		hw_dbg(hw, " Error on flow type input\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+	          IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+	/*
+	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
+	 */
+	fdirhashcmd = (u64)fdircmd << 32;
+	fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
+	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+	hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
+	return 0;
+}
+
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+	u32 n = (_n); \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+		bucket_hash ^= lo_hash_dword >> n; \
+	if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+		bucket_hash ^= hi_hash_dword >> n; \
+} while (0);
+
+/**
+ *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ *  @atr_input: input bitstream to compute the hash on
+ *  @input_mask: mask for the input bitstream
+ *
+ *  This function serves two main purposes.  First it applys the input_mask
+ *  to the atr_input resulting in a cleaned up atr_input data stream.
+ *  Secondly it computes the hash and stores it in the bkt_hash field at
+ *  the end of the input byte stream.  This way it will be available for
+ *  future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+					  union ixgbe_atr_input *input_mask)
+{
+
+	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+	u32 bucket_hash = 0;
+
+	/* Apply masks to input data */
+	input->dword_stream[0]  &= input_mask->dword_stream[0];
+	input->dword_stream[1]  &= input_mask->dword_stream[1];
+	input->dword_stream[2]  &= input_mask->dword_stream[2];
+	input->dword_stream[3]  &= input_mask->dword_stream[3];
+	input->dword_stream[4]  &= input_mask->dword_stream[4];
+	input->dword_stream[5]  &= input_mask->dword_stream[5];
+	input->dword_stream[6]  &= input_mask->dword_stream[6];
+	input->dword_stream[7]  &= input_mask->dword_stream[7];
+	input->dword_stream[8]  &= input_mask->dword_stream[8];
+	input->dword_stream[9]  &= input_mask->dword_stream[9];
+	input->dword_stream[10] &= input_mask->dword_stream[10];
+
+	/* record the flow_vm_vlan bits as they are a key part to the hash */
+	flow_vm_vlan = ntohl(input->dword_stream[0]);
+
+	/* generate common hash dword */
+	hi_hash_dword = ntohl(input->dword_stream[1] ^
+				    input->dword_stream[2] ^
+				    input->dword_stream[3] ^
+				    input->dword_stream[4] ^
+				    input->dword_stream[5] ^
+				    input->dword_stream[6] ^
+				    input->dword_stream[7] ^
+				    input->dword_stream[8] ^
+				    input->dword_stream[9] ^
+				    input->dword_stream[10]);
+
+	/* low dword is word swapped version of common */
+	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+	/* apply flow ID/VM pool/VLAN ID bits to hash words */
+	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+	/* Process bits 0 and 16 */
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+	/*
+	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+	 * delay this because bit 0 of the stream should not be processed
+	 * so we do not add the vlan until after bit 0 was processed
+	 */
+	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+	/* Process remaining 30 bit of the key */
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
+	IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+
+	/*
+	 * Limit hash to 13 bits since max bucket count is 8K.
+	 * Store result at the end of the input stream.
+	 */
+	input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
+ *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ *  @input_mask: mask to be bit swapped
+ *
+ *  The source and destination port masks for flow director are bit swapped
+ *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
+ *  generate a correctly swapped value we need to bit swap the mask and that
+ *  is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+{
+	u32 mask = ntohs(input_mask->formatted.dst_port);
+	mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+	mask |= ntohs(input_mask->formatted.src_port);
+	mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+	mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+	mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+	return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian.  As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+	IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+	ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+				    union ixgbe_atr_input *input_mask)
+{
+	/* mask IPv6 since it is currently not supported */
+	u32 fdirm = IXGBE_FDIRM_DIPv6;
+	u32 fdirtcpm;
+
+	/*
+	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
+	 * are zero, then assume a full mask for that field.  Also assume that
+	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
+	 * cannot be masked out in this implementation.
+	 *
+	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
+	 * point in time.
+	 */
+
+	/* verify bucket hash is cleared on hash generation */
+	if (input_mask->formatted.bkt_hash)
+		hw_dbg(hw, " bucket hash should always be 0 in mask\n");
+
+	/* Program FDIRM and verify partial masks */
+	switch (input_mask->formatted.vm_pool & 0x7F) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_POOL;
+	case 0x7F:
+		break;
+	default:
+		hw_dbg(hw, " Error on vm pool mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+	case 0x0:
+		fdirm |= IXGBE_FDIRM_L4P;
+		if (input_mask->formatted.dst_port ||
+		    input_mask->formatted.src_port) {
+			hw_dbg(hw, " Error on src/dst port mask\n");
+			return IXGBE_ERR_CONFIG;
+		}
+	case IXGBE_ATR_L4TYPE_MASK:
+		break;
+	default:
+		hw_dbg(hw, " Error on flow type mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
+	case 0x0000:
+		/* mask VLAN ID, fall through to mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0x0FFF:
+		/* mask VLAN priority */
+		fdirm |= IXGBE_FDIRM_VLANP;
+		break;
+	case 0xE000:
+		/* mask VLAN ID only, fall through */
+		fdirm |= IXGBE_FDIRM_VLANID;
+	case 0xEFFF:
+		/* no VLAN fields masked */
+		break;
+	default:
+		hw_dbg(hw, " Error on VLAN mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+	case 0x0000:
+		/* Mask Flex Bytes, fall through */
+		fdirm |= IXGBE_FDIRM_FLEX;
+	case 0xFFFF:
+		break;
+	default:
+		hw_dbg(hw, " Error on flexible byte mask\n");
+		return IXGBE_ERR_CONFIG;
+	}
+
+	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
+
+	/* store the TCP/UDP port masks, bit reversed from port layout */
+	fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
+
+	/* write both the same so that UDP and TCP use the same mask */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+	/* store source and destination IP masks (big-enian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+			     ~input_mask->formatted.src_ip[0]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+			     ~input_mask->formatted.dst_ip[0]);
+
+	return 0;
+}
+
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id, u8 queue)
+{
+	u32 fdirport, fdirvlan, fdirhash, fdircmd;
+
+	/* currently IPv6 is not supported, must be programmed with 0 */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+			     input->formatted.src_ip[0]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+			     input->formatted.src_ip[1]);
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+			     input->formatted.src_ip[2]);
+
+	/* record the source address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+	/* record the first 32 bits of the destination address (big-endian) */
+	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+	/* record source and destination port (little-endian)*/
+	fdirport = ntohs(input->formatted.dst_port);
+	fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+	fdirport |= ntohs(input->formatted.src_port);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+	/* record vlan (little-endian) and flex_bytes(big-endian) */
+	fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+	fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+	fdirvlan |= ntohs(input->formatted.vlan_id);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/*
+	 * flush all previous writes to make certain registers are
+	 * programmed prior to issuing the command
+	 */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* configure FDIRCMD register */
+	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+	if (queue == IXGBE_FDIR_DROP_QUEUE)
+		fdircmd |= IXGBE_FDIRCMD_DROP;
+	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+	fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
+
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+	return 0;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+					  union ixgbe_atr_input *input,
+					  u16 soft_id)
+{
+	u32 fdirhash;
+	u32 fdircmd = 0;
+	u32 retry_count;
+	s32 err = 0;
+
+	/* configure FDIRHASH register */
+	fdirhash = input->formatted.bkt_hash;
+	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+	/* flush hash to HW */
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Query if filter is present */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+	for (retry_count = 10; retry_count; retry_count--) {
+		/* allow 10us for query to process */
+		udelay(10);
+		/* verify query completed successfully */
+		fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+		if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+			break;
+	}
+
+	if (!retry_count)
+		err = IXGBE_ERR_FDIR_REINIT_FAILED;
+
+	/* if filter exists in hardware then remove it */
+	if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+		IXGBE_WRITE_FLUSH(hw);
+		IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+				IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+	}
+
+	return err;
+}
+
+/**
+ *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: analog register to read
+ *  @val: read value
+ *
+ *  Performs read operation to Omer analog register specified.
+ **/
+static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+	u32  core_ctl;
+
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+	                (reg << 8));
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+	core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+	*val = (u8)core_ctl;
+
+	return 0;
+}
+
+/**
+ *  ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ *  @hw: pointer to hardware structure
+ *  @reg: atlas register to write
+ *  @val: value to write
+ *
+ *  Performs write operation to Omer analog register specified.
+ **/
+static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+	u32  core_ctl;
+
+	core_ctl = (reg << 8) | val;
+	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+	IXGBE_WRITE_FLUSH(hw);
+	udelay(10);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware using the generic start_hw function
+ *  and the generation start_hw function.
+ *  Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+	s32 ret_val = 0;
+
+	ret_val = ixgbe_start_hw_generic(hw);
+	if (ret_val != 0)
+		goto out;
+
+	ret_val = ixgbe_start_hw_gen2(hw);
+	if (ret_val != 0)
+		goto out;
+
+	/* We need to run link autotry after the driver loads */
+	hw->mac.autotry_restart = true;
+	hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
+
+	if (ret_val == 0)
+		ret_val = ixgbe_verify_fw_version_82599(hw);
+out:
+	return ret_val;
+}
+
+/**
+ *  ixgbe_identify_phy_82599 - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ *  If PHY already detected, maintains current PHY type in hw struct,
+ *  otherwise executes the PHY detection routine.
+ **/
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+
+	/* Detect PHY if not unknown - returns success if already detected. */
+	status = ixgbe_identify_phy_generic(hw);
+	if (status != 0) {
+		/* 82599 10GBASE-T requires an external PHY */
+		if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+			goto out;
+		else
+			status = ixgbe_identify_sfp_module_generic(hw);
+	}
+
+	/* Set PHY type none if no PHY detected */
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		hw->phy.type = ixgbe_phy_none;
+		status = 0;
+	}
+
+	/* Return error if SFP module has been detected but is not supported */
+	if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+		status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+out:
+	return status;
+}
+
+/**
+ *  ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines physical layer capabilities of the current configuration.
+ **/
+static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+{
+	u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+	u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+	u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+	u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+	u16 ext_ability = 0;
+	u8 comp_codes_10g = 0;
+	u8 comp_codes_1g = 0;
+
+	hw->phy.ops.identify(hw);
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_tn:
+	case ixgbe_phy_aq:
+	case ixgbe_phy_cu_unknown:
+		hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+							 &ext_ability);
+		if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+		goto out;
+	default:
+		break;
+	}
+
+	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_AN:
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+			    IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+			goto out;
+		} else
+			/* SFI mode so read SFP module */
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+		goto out;
+		break;
+	case IXGBE_AUTOC_LMS_10G_SERIAL:
+		if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+			goto out;
+		} else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+			goto sfp_check;
+		break;
+	case IXGBE_AUTOC_LMS_KX4_KX_KR:
+	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+		if (autoc & IXGBE_AUTOC_KX_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+		if (autoc & IXGBE_AUTOC_KX4_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+		if (autoc & IXGBE_AUTOC_KR_SUPP)
+			physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+		goto out;
+		break;
+	default:
+		goto out;
+		break;
+	}
+
+sfp_check:
+	/* SFP check must be done last since DA modules are sometimes used to
+	 * test KR mode -  we need to id KR mode correctly before SFP module.
+	 * Call identify_sfp because the pluggable module may have changed */
+	hw->phy.ops.identify_sfp(hw);
+	if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+		goto out;
+
+	switch (hw->phy.type) {
+	case ixgbe_phy_sfp_passive_tyco:
+	case ixgbe_phy_sfp_passive_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+		break;
+	case ixgbe_phy_sfp_ftl_active:
+	case ixgbe_phy_sfp_active_unknown:
+		physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+		break;
+	case ixgbe_phy_sfp_avago:
+	case ixgbe_phy_sfp_ftl:
+	case ixgbe_phy_sfp_intel:
+	case ixgbe_phy_sfp_unknown:
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+		hw->phy.ops.read_i2c_eeprom(hw,
+		      IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+		if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+		else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+		else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+			physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+		break;
+	default:
+		break;
+	}
+
+out:
+	return physical_layer;
+}
+
+/**
+ *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ *  @hw: pointer to hardware structure
+ *  @regval: register value to write to RXCTRL
+ *
+ *  Enables the Rx DMA unit for 82599
+ **/
+static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+#define IXGBE_MAX_SECRX_POLL 30
+	int i;
+	int secrxreg;
+
+	/*
+	 * Workaround for 82599 silicon errata when enabling the Rx datapath.
+	 * If traffic is incoming before we enable the Rx unit, it could hang
+	 * the Rx DMA unit.  Therefore, make sure the security engine is
+	 * completely disabled prior to enabling the Rx unit.
+	 */
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+		secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+		if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+			break;
+		else
+			/* Use interrupt-safe sleep just in case */
+			udelay(10);
+	}
+
+	/* For informational purposes only */
+	if (i >= IXGBE_MAX_SECRX_POLL)
+		hw_dbg(hw, "Rx unit being enabled before security "
+		       "path fully disabled.  Continuing with init.\n");
+
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
+ *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ *  @hw: pointer to hardware structure
+ *
+ *  Verifies that installed the firmware version is 0.6 or higher
+ *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ *  Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ *  if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM_VERSION;
+	u16 fw_offset, fw_ptp_cfg_offset;
+	u16 fw_version = 0;
+
+	/* firmware check is only necessary for SFI devices */
+	if (hw->phy.media_type != ixgbe_media_type_fiber) {
+		status = 0;
+		goto fw_version_out;
+	}
+
+	/* get the offset to the Firmware Module block */
+	hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the offset to the Pass Through Patch Configuration block */
+	hw->eeprom.ops.read(hw, (fw_offset +
+	                         IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+	                         &fw_ptp_cfg_offset);
+
+	if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+		goto fw_version_out;
+
+	/* get the firmware version */
+	hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+	                         IXGBE_FW_PATCH_VERSION_4),
+	                         &fw_version);
+
+	if (fw_version > 0x5)
+		status = 0;
+
+fw_version_out:
+	return status;
+}
+
+/**
+ *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns true if the LESM FW module is present and enabled. Otherwise
+ *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+	bool lesm_enabled = false;
+	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+	s32 status;
+
+	/* get the offset to the Firmware Module block */
+	status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+	if ((status != 0) ||
+	    (fw_offset == 0) || (fw_offset == 0xFFFF))
+		goto out;
+
+	/* get the offset to the LESM Parameters block */
+	status = hw->eeprom.ops.read(hw, (fw_offset +
+				     IXGBE_FW_LESM_PARAMETERS_PTR),
+				     &fw_lesm_param_offset);
+
+	if ((status != 0) ||
+	    (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+		goto out;
+
+	/* get the lesm state word */
+	status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+				     IXGBE_FW_LESM_STATE_1),
+				     &fw_lesm_state);
+
+	if ((status == 0) &&
+	    (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+		lesm_enabled = true;
+
+out:
+	return lesm_enabled;
+}
+
+/**
+ *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in EEPROM to read
+ *  @words: number of words
+ *  @data: word(s) read from the EEPROM
+ *
+ *  Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+					  u16 words, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+							 data);
+	else
+		ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+								    words,
+								    data);
+
+	return ret_val;
+}
+
+/**
+ *  ixgbe_read_eeprom_82599 - Read EEPROM word using
+ *  fastest available method
+ *
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+				   u16 offset, u16 *data)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	s32 ret_val = IXGBE_ERR_CONFIG;
+
+	/*
+	 * If EEPROM is detected and can be addressed using 14 bits,
+	 * use EERD otherwise use bit bang
+	 */
+	if ((eeprom->type == ixgbe_eeprom_spi) &&
+	    (offset <= IXGBE_EERD_MAX_ADDR))
+		ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+	else
+		ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+	return ret_val;
+}
+
+static struct ixgbe_mac_operations mac_ops_82599 = {
+	.init_hw                = &ixgbe_init_hw_generic,
+	.reset_hw               = &ixgbe_reset_hw_82599,
+	.start_hw               = &ixgbe_start_hw_82599,
+	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
+	.get_media_type         = &ixgbe_get_media_type_82599,
+	.get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
+	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
+	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
+	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
+	.get_device_caps        = &ixgbe_get_device_caps_generic,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
+	.stop_adapter           = &ixgbe_stop_adapter_generic,
+	.get_bus_info           = &ixgbe_get_bus_info_generic,
+	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
+	.read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
+	.write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
+	.setup_link             = &ixgbe_setup_mac_link_82599,
+	.set_rxpba		= &ixgbe_set_rxpba_generic,
+	.check_link             = &ixgbe_check_mac_link_generic,
+	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
+	.led_on                 = &ixgbe_led_on_generic,
+	.led_off                = &ixgbe_led_off_generic,
+	.blink_led_start        = &ixgbe_blink_led_start_generic,
+	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
+	.set_rar                = &ixgbe_set_rar_generic,
+	.clear_rar              = &ixgbe_clear_rar_generic,
+	.set_vmdq               = &ixgbe_set_vmdq_generic,
+	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
+	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
+	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
+	.enable_mc              = &ixgbe_enable_mc_generic,
+	.disable_mc             = &ixgbe_disable_mc_generic,
+	.clear_vfta             = &ixgbe_clear_vfta_generic,
+	.set_vfta               = &ixgbe_set_vfta_generic,
+	.fc_enable              = &ixgbe_fc_enable_generic,
+	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
+	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
+	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
+	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
+	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
+	.release_swfw_sync      = &ixgbe_release_swfw_sync,
+
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
+	.init_params		= &ixgbe_init_eeprom_params_generic,
+	.read			= &ixgbe_read_eeprom_82599,
+	.read_buffer		= &ixgbe_read_eeprom_buffer_82599,
+	.write			= &ixgbe_write_eeprom_generic,
+	.write_buffer		= &ixgbe_write_eeprom_buffer_bit_bang_generic,
+	.calc_checksum		= &ixgbe_calc_eeprom_checksum_generic,
+	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
+	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82599 = {
+	.identify		= &ixgbe_identify_phy_82599,
+	.identify_sfp		= &ixgbe_identify_sfp_module_generic,
+	.init			= &ixgbe_init_phy_ops_82599,
+	.reset			= &ixgbe_reset_phy_generic,
+	.read_reg		= &ixgbe_read_phy_reg_generic,
+	.write_reg		= &ixgbe_write_phy_reg_generic,
+	.setup_link		= &ixgbe_setup_phy_link_generic,
+	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic,
+	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic,
+	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic,
+	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic,
+	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic,
+	.check_overtemp		= &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_82599_info = {
+	.mac                    = ixgbe_mac_82599EB,
+	.get_invariants         = &ixgbe_get_invariants_82599,
+	.mac_ops                = &mac_ops_82599,
+	.eeprom_ops             = &eeprom_ops_82599,
+	.phy_ops                = &phy_ops_82599,
+	.mbx_ops                = &mbx_ops_generic,
+};