Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Fixes and improvements for perf/core:

. Overhaul the tools/ makefiles, gluing them to the top level Makefile, from
  Borislav Petkov.

. Move the UI files from tools/perf/util/ui/ to tools/perf/ui/. Also move
  the GTK+ browser to tools/perf/ui/gtk/, from Namhyung Kim.

. Only fallback to sw cycles counter on ENOENT for the hw cycles, from
  Robert Richter

. Trivial fixes from Robert Richter

. Handle the autogenerated bison/flex files better, from Namhyung and Jiri Olsa.

. Navigate jump instructions in the annotate browser, just press enter or ->,
  still needs support for a jump navigation history, i.e. to go back.

. Search string in the annotate browser: same keys as vim:
     / forward
     n next backward/forward
     ? backward

. Clarify number of events/samples in the report header, from Ashay Rane

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 64 insertions, 5 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
index 383b9413292..49aa41fe7b8 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c
@@ -128,14 +128,14 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
 	/* Disable relaxed ordering */
 	for (i = 0; i < hw->mac.max_tx_queues; i++) {
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
-		regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+		regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
 	}
 
 	for (i = 0; i < hw->mac.max_rx_queues; i++) {
 		regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
-		regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
-					IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+		regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
+			    IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
 		IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
 	}
 
@@ -2011,13 +2011,20 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
 	IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
 	IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
 
-	fcrth = hw->fc.high_water[packetbuf_num] << 10;
 	fcrtl = hw->fc.low_water << 10;
 
 	if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+		fcrth = hw->fc.high_water[packetbuf_num] << 10;
 		fcrth |= IXGBE_FCRTH_FCEN;
 		if (hw->fc.send_xon)
 			fcrtl |= IXGBE_FCRTL_XONE;
+	} else {
+		/*
+		 * If Tx flow control is disabled, set our high water mark
+		 * to Rx FIFO size minus 32 in order prevent Tx switch
+		 * loopback from stalling on DMA.
+		 */
+		fcrth = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num)) - 32;
 	}
 
 	IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth);
@@ -2578,6 +2585,58 @@ void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
 }
 
 /**
+ *  ixgbe_disable_rx_buff_generic - Stops the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Stops the receive data path and waits for the HW to internally
+ *  empty the Rx security block.
+ **/
+s32 ixgbe_disable_rx_buff_generic(struct ixgbe_hw *hw)
+{
+#define IXGBE_MAX_SECRX_POLL 40
+	int i;
+	int secrxreg;
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+		secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+		if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+			break;
+		else
+			/* Use interrupt-safe sleep just in case */
+			udelay(10);
+	}
+
+	/* For informational purposes only */
+	if (i >= IXGBE_MAX_SECRX_POLL)
+		hw_dbg(hw, "Rx unit being enabled before security "
+		       "path fully disabled.  Continuing with init.\n");
+
+	return 0;
+
+}
+
+/**
+ *  ixgbe_enable_rx_buff - Enables the receive data path
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables the receive data path
+ **/
+s32 ixgbe_enable_rx_buff_generic(struct ixgbe_hw *hw)
+{
+	int secrxreg;
+
+	secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+	secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+	IXGBE_WRITE_FLUSH(hw);
+
+	return 0;
+}
+
+/**
  *  ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
  *  @hw: pointer to hardware structure
  *  @regval: register value to write to RXCTRL
@@ -3336,7 +3395,7 @@ static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
  *  @hw: pointer to the HW structure
  *  @buffer: contains the command to write and where the return status will
  *           be placed
- *  @lenght: lenght of buffer, must be multiple of 4 bytes
+ *  @length: length of buffer, must be multiple of 4 bytes
  *
  *  Communicates with the manageability block.  On success return 0
  *  else return IXGBE_ERR_HOST_INTERFACE_COMMAND.