net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool.

o min_tx_rate puts lower limit on the VF bandwidth. VF is guaranteed
  to have a bandwidth of at least this value.
  max_tx_rate puts cap on the VF bandwidth. VF can have a bandwidth
  of up to this value.

o A new handler set_vf_rate for attr IFLA_VF_RATE has been introduced
  which takes 4 arguments:
  netdev, VF number, min_tx_rate, max_tx_rate

o ndo_set_vf_rate replaces ndo_set_vf_tx_rate handler.

o Drivers that currently implement ndo_set_vf_tx_rate should now call
  ndo_set_vf_rate instead and reject attempt to set a minimum bandwidth
  greater than 0 for IFLA_VF_TX_RATE when IFLA_VF_RATE is not yet
  implemented by driver.

o If user enters only one of either min_tx_rate or max_tx_rate, then,
  userland should read back the other value from driver and set both
  for IFLA_VF_RATE.
  Drivers that have not yet implemented IFLA_VF_RATE should always
  return min_tx_rate as 0 when read from ip tool.

o If both IFLA_VF_TX_RATE and IFLA_VF_RATE options are specified, then
  IFLA_VF_RATE should override.

o Idea is to have consistent display of rate values to user.

o Usage example: -

  ./ip link set p4p1 vf 0 rate 900

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 900 (Mbps), max_tx_rate 900Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 300 min_tx_rate 200

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f0 brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5a, tx rate 300 (Mbps), max_tx_rate 300Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

  ./ip link set p4p1 vf 0 max_tx_rate 600 rate 300

  ./ip link show p4p1
  32: p4p1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
  DEFAULT qlen 1000
    link/ether 00:0e:1e:08:b0:f brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 3e:a0:ca:bd:ae:5, tx rate 600 (Mbps), max_tx_rate 600Mbps,
    min_tx_rate 200Mbps
    vf 1 MAC f6:c6:7c:3f:3d:6c
    vf 2 MAC 56:32:43:98:d7:71
    vf 3 MAC d6:be:c3:b5:85:ff
    vf 4 MAC ee:a9:9a:1e:19:14
    vf 5 MAC 4a:d0:4c:07:52:18
    vf 6 MAC 3a:76:44:93:62:f9
    vf 7 MAC 82:e9:e7:e3:15:1a

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

3 files changed, 12 insertions, 6 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 8089ea9f2fb..a5332389620 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7926,7 +7926,7 @@ static const struct net_device_ops ixgbe_netdev_ops = {
 	.ndo_do_ioctl		= ixgbe_ioctl,
 	.ndo_set_vf_mac		= ixgbe_ndo_set_vf_mac,
 	.ndo_set_vf_vlan	= ixgbe_ndo_set_vf_vlan,
-	.ndo_set_vf_tx_rate	= ixgbe_ndo_set_vf_bw,
+	.ndo_set_vf_rate	= ixgbe_ndo_set_vf_bw,
 	.ndo_set_vf_spoofchk	= ixgbe_ndo_set_vf_spoofchk,
 	.ndo_get_vf_config	= ixgbe_ndo_get_vf_config,
 	.ndo_get_stats64	= ixgbe_get_stats64,
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
index a01417c0662..3248e208c9d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c
@@ -1222,7 +1222,8 @@ void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
 	}
 }
 
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(netdev);
 	int link_speed;
@@ -1240,13 +1241,16 @@ int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
 	if (link_speed != 10000)
 		return -EINVAL;
 
+	if (min_tx_rate)
+		return -EINVAL;
+
 	/* rate limit cannot be less than 10Mbs or greater than link speed */
-	if (tx_rate && ((tx_rate <= 10) || (tx_rate > link_speed)))
+	if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed)))
 		return -EINVAL;
 
 	/* store values */
 	adapter->vf_rate_link_speed = link_speed;
-	adapter->vfinfo[vf].tx_rate = tx_rate;
+	adapter->vfinfo[vf].tx_rate = max_tx_rate;
 
 	/* update hardware configuration */
 	ixgbe_set_vf_rate_limit(adapter, vf);
@@ -1288,7 +1292,8 @@ int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 		return -EINVAL;
 	ivi->vf = vf;
 	memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
-	ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
+	ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate;
+	ivi->min_tx_rate = 0;
 	ivi->vlan = adapter->vfinfo[vf].pf_vlan;
 	ivi->qos = adapter->vfinfo[vf].pf_qos;
 	ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
index cea64014760..32c26d586c0 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h
@@ -44,7 +44,8 @@ void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
 int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
 int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
 			   u8 qos);
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate,
+			int max_tx_rate);
 int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting);
 int ixgbe_ndo_get_vf_config(struct net_device *netdev,
 			    int vf, struct ifla_vf_info *ivi);