Merge tag 'regmap-3.4' into regmap-stride

regmap: Last minute bug fix for 3.4

This is a last minute bug fix that was only just noticed since the code
path that's being exercised here is one that is fairly rarely used.  The
changelog for the change itself is extremely clear and the code itself
is obvious to inspection so should be pretty safe.

Conflicts:
	drivers/base/regmap/regmap.c (overlap between the fix and stride code)

7 files changed, 94 insertions, 66 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 64c76443a7a..b461c24945e 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1310,10 +1310,6 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 
 		if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
 			oem_reg |= HV_OEM_BITS_LPLU;
-
-		/* Set Restart auto-neg to activate the bits */
-		if (!hw->phy.ops.check_reset_block(hw))
-			oem_reg |= HV_OEM_BITS_RESTART_AN;
 	} else {
 		if (mac_reg & (E1000_PHY_CTRL_GBE_DISABLE |
 			       E1000_PHY_CTRL_NOND0A_GBE_DISABLE))
@@ -1324,6 +1320,11 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
 			oem_reg |= HV_OEM_BITS_LPLU;
 	}
 
+	/* Set Restart auto-neg to activate the bits */
+	if ((d0_state || (hw->mac.type != e1000_pchlan)) &&
+	    !hw->phy.ops.check_reset_block(hw))
+		oem_reg |= HV_OEM_BITS_RESTART_AN;
+
 	ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
 
 release:
@@ -3682,7 +3683,11 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
 
 	if (hw->mac.type >= e1000_pchlan) {
 		e1000_oem_bits_config_ich8lan(hw, false);
-		e1000_phy_hw_reset_ich8lan(hw);
+
+		/* Reset PHY to activate OEM bits on 82577/8 */
+		if (hw->mac.type == e1000_pchlan)
+			e1000e_phy_hw_reset_generic(hw);
+
 		ret_val = hw->phy.ops.acquire(hw);
 		if (ret_val)
 			return;
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index 19ab2154802..9520a6ac1f3 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
 	/* fire an unusual interrupt on the test handler */
 	ew32(ICS, E1000_ICS_RXSEQ);
 	e1e_flush();
-	msleep(50);
+	msleep(100);
 
 	e1000_irq_disable(adapter);
 
diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c
index ff796e42c3e..16adeb9418a 100644
--- a/drivers/net/ethernet/intel/e1000e/param.c
+++ b/drivers/net/ethernet/intel/e1000e/param.c
@@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 /*
  * Interrupt Throttle Rate (interrupts/sec)
  *
- * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative
  */
 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 #define DEFAULT_ITR 3
@@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 
 		if (num_InterruptThrottleRate > bd) {
 			adapter->itr = InterruptThrottleRate[bd];
-			switch (adapter->itr) {
-			case 0:
-				e_info("%s turned off\n", opt.name);
-				break;
-			case 1:
-				e_info("%s set to dynamic mode\n", opt.name);
-				adapter->itr_setting = adapter->itr;
-				adapter->itr = 20000;
-				break;
-			case 3:
-				e_info("%s set to dynamic conservative mode\n",
-					opt.name);
-				adapter->itr_setting = adapter->itr;
-				adapter->itr = 20000;
-				break;
-			case 4:
-				e_info("%s set to simplified (2000-8000 ints) "
-				       "mode\n", opt.name);
-				adapter->itr_setting = 4;
-				break;
-			default:
-				/*
-				 * Save the setting, because the dynamic bits
-				 * change itr.
-				 */
-				if (e1000_validate_option(&adapter->itr, &opt,
-							  adapter) &&
-				    (adapter->itr == 3)) {
-					/*
-					 * In case of invalid user value,
-					 * default to conservative mode.
-					 */
-					adapter->itr_setting = adapter->itr;
-					adapter->itr = 20000;
-				} else {
-					/*
-					 * Clear the lower two bits because
-					 * they are used as control.
-					 */
-					adapter->itr_setting =
-						adapter->itr & ~3;
-				}
-				break;
-			}
+
+			/*
+			 * Make sure a message is printed for non-special
+			 * values.  And in case of an invalid option, display
+			 * warning, use default and got through itr/itr_setting
+			 * adjustment logic below
+			 */
+			if ((adapter->itr > 4) &&
+			    e1000_validate_option(&adapter->itr, &opt, adapter))
+				adapter->itr = opt.def;
 		} else {
-			adapter->itr_setting = opt.def;
+			/*
+			 * If no option specified, use default value and go
+			 * through the logic below to adjust itr/itr_setting
+			 */
+			adapter->itr = opt.def;
+
+			/*
+			 * Make sure a message is printed for non-special
+			 * default values
+			 */
+			if (adapter->itr > 40)
+				e_info("%s set to default %d\n", opt.name,
+				       adapter->itr);
+		}
+
+		adapter->itr_setting = adapter->itr;
+		switch (adapter->itr) {
+		case 0:
+			e_info("%s turned off\n", opt.name);
+			break;
+		case 1:
+			e_info("%s set to dynamic mode\n", opt.name);
+			adapter->itr = 20000;
+			break;
+		case 3:
+			e_info("%s set to dynamic conservative mode\n",
+			       opt.name);
 			adapter->itr = 20000;
+			break;
+		case 4:
+			e_info("%s set to simplified (2000-8000 ints) mode\n",
+			       opt.name);
+			break;
+		default:
+			/*
+			 * Save the setting, because the dynamic bits
+			 * change itr.
+			 *
+			 * Clear the lower two bits because
+			 * they are used as control.
+			 */
+			adapter->itr_setting &= ~3;
+			break;
 		}
 	}
 	{ /* Interrupt Mode */
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index d61ca2a732f..8ec74b07f94 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev,
 			netdev->addr_len);
 	}
 
-	if (!is_valid_ether_addr(netdev->perm_addr)) {
+	if (!is_valid_ether_addr(netdev->dev_addr)) {
 		dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
 		        netdev->dev_addr);
 		err = -EIO;
 		goto err_hw_init;
 	}
 
-	memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+	memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
 
 	setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
 	            (unsigned long) adapter);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
index 77ea4b71653..bc07933d67d 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c
@@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
 	 */
 	if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
 	    (fctl & FC_FC_END_SEQ)) {
+		skb_linearize(skb);
 		crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
 		crc->fcoe_eof = FC_EOF_T;
 	}
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
index 027d7a75be3..ed1b47dc083 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c
@@ -622,6 +622,16 @@ static int ixgbe_alloc_q_vector(struct ixgbe_adapter *adapter, int v_idx,
 		if (adapter->hw.mac.type == ixgbe_mac_82599EB)
 			set_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state);
 
+#ifdef IXGBE_FCOE
+		if (adapter->netdev->features & NETIF_F_FCOE_MTU) {
+			struct ixgbe_ring_feature *f;
+			f = &adapter->ring_feature[RING_F_FCOE];
+			if ((rxr_idx >= f->mask) &&
+			    (rxr_idx < f->mask + f->indices))
+				set_bit(__IXGBE_RX_FCOE_BUFSZ, &ring->state);
+		}
+
+#endif /* IXGBE_FCOE */
 		/* apply Rx specific ring traits */
 		ring->count = adapter->rx_ring_count;
 		ring->queue_index = rxr_idx;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 3e26b1f9ac7..88f6b2e9b72 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -3154,14 +3154,6 @@ static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
 			set_ring_rsc_enabled(rx_ring);
 		else
 			clear_ring_rsc_enabled(rx_ring);
-#ifdef IXGBE_FCOE
-		if (netdev->features & NETIF_F_FCOE_MTU) {
-			struct ixgbe_ring_feature *f;
-			f = &adapter->ring_feature[RING_F_FCOE];
-			if ((i >= f->mask) && (i < f->mask + f->indices))
-				set_bit(__IXGBE_RX_FCOE_BUFSZ, &rx_ring->state);
-		}
-#endif /* IXGBE_FCOE */
 	}
 }
 
@@ -4836,7 +4828,9 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	pci_wake_from_d3(pdev, false);
 
+	rtnl_lock();
 	err = ixgbe_init_interrupt_scheme(adapter);
+	rtnl_unlock();
 	if (err) {
 		e_dev_err("Cannot initialize interrupts for device\n");
 		return err;
@@ -4879,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	}
 
 	ixgbe_clear_interrupt_scheme(adapter);
-#ifdef CONFIG_DCB
-	kfree(adapter->ixgbe_ieee_pfc);
-	kfree(adapter->ixgbe_ieee_ets);
-#endif
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -4893,6 +4883,16 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
 	if (wufc) {
 		ixgbe_set_rx_mode(netdev);
 
+		/*
+		 * enable the optics for both mult-speed fiber and
+		 * 82599 SFP+ fiber as we can WoL.
+		 */
+		if (hw->mac.ops.enable_tx_laser &&
+		    (hw->phy.multispeed_fiber ||
+		    (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber &&
+		     hw->mac.type == ixgbe_mac_82599EB)))
+			hw->mac.ops.enable_tx_laser(hw);
+
 		/* turn on all-multi mode if wake on multicast is enabled */
 		if (wufc & IXGBE_WUFC_MC) {
 			fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
@@ -7220,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev)
 
 	ixgbe_release_hw_control(adapter);
 
+#ifdef CONFIG_DCB
+	kfree(adapter->ixgbe_ieee_pfc);
+	kfree(adapter->ixgbe_ieee_ets);
+
+#endif
 	iounmap(adapter->hw.hw_addr);
 	pci_release_selected_regions(pdev, pci_select_bars(pdev,
 				     IORESOURCE_MEM));