[PATCH] New PowerPC 4xx on-chip ethernet controller driver

This patch replaces current PowerPC 4xx EMAC driver with
new, re-written from the scratch version. This patch is quite big
(~234K) because there is virtualy 0% of common code between old and
new version.

New driver uses NAPI, it solves stability problems under heavy packet
load and low memory, corrects chip register access and fixes numerous
small bugs I don't even remember now.

This patch has been tested on all supported in 2.6 PPC 4xx boards.
It's been used in production for almost a year now on custom
4xx hardware. PPC32 specific parts are already upstream.

Patch was acked by the current EMAC driver maintainer (Matt Porter). I
will be maintaining this new version.

Signed-off-by: Eugene Surovegin <ebs@ebshome.net>
--

 Kconfig                   |   72
 ibm_emac/Makefile         |   13
 ibm_emac/ibm_emac.h       |  418 +++--
 ibm_emac/ibm_emac_core.c  | 3414 ++++++++++++++++++++++++----------------------
 ibm_emac/ibm_emac_core.h  |  313 ++--
 ibm_emac/ibm_emac_debug.c |  377 ++---
 ibm_emac/ibm_emac_debug.h |   63
 ibm_emac/ibm_emac_mal.c   |  674 +++++----
 ibm_emac/ibm_emac_mal.h   |  336 +++-
 ibm_emac/ibm_emac_phy.c   |  335 ++--
 ibm_emac/ibm_emac_phy.h   |  105 -
 ibm_emac/ibm_emac_rgmii.c |  201 ++
 ibm_emac/ibm_emac_rgmii.h |   68
 ibm_emac/ibm_emac_tah.c   |  111 +
 ibm_emac/ibm_emac_tah.h   |   96 -
 ibm_emac/ibm_emac_zmii.c  |  255 +++
 ibm_emac/ibm_emac_zmii.h  |  114 -
 17 files changed, 4114 insertions(+), 2851 deletions(-)
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 24 insertions, 81 deletions

diff --git a/drivers/net/ibm_emac/ibm_emac_phy.h b/drivers/net/ibm_emac/ibm_emac_phy.h
index 61afbea9656..a70e0fea54c 100644
--- a/drivers/net/ibm_emac/ibm_emac_phy.h
+++ b/drivers/net/ibm_emac/ibm_emac_phy.h
@@ -1,65 +1,25 @@
-
 /*
- * ibm_emac_phy.h
- *
+ * drivers/net/ibm_emac/ibm_emac_phy.h
  *
- *      Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *      February 2003
+ * Driver for PowerPC 4xx on-chip ethernet controller, PHY support
  *
- * This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ * February 2003
  *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR   IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * Minor additions by Eugene Surovegin <ebs@ebshome.net>, 2004
  *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  *
  * This file basically duplicates sungem_phy.{c,h} with different PHYs
  * supported. I'm looking into merging that in a single mii layer more
  * flexible than mii.c 
  */
 
-#ifndef _IBM_EMAC_PHY_H_
-#define _IBM_EMAC_PHY_H_
-
-/*
- * PHY mode settings
- * Used for multi-mode capable PHYs
- */
-#define PHY_MODE_NA	0
-#define PHY_MODE_MII	1
-#define PHY_MODE_RMII	2
-#define PHY_MODE_SMII	3
-#define PHY_MODE_RGMII	4
-#define PHY_MODE_TBI	5
-#define PHY_MODE_GMII	6
-#define PHY_MODE_RTBI	7
-#define PHY_MODE_SGMII	8
-
-/*
- * PHY specific registers/values
- */
-
-/* CIS8201 */
-#define MII_CIS8201_EPCR	0x17
-#define EPCR_MODE_MASK		0x3000
-#define EPCR_GMII_MODE		0x0000
-#define EPCR_RGMII_MODE		0x1000
-#define EPCR_TBI_MODE		0x2000
-#define EPCR_RTBI_MODE		0x3000
+#ifndef _IBM_OCP_PHY_H_
+#define _IBM_OCP_PHY_H_
 
 struct mii_phy;
 
@@ -77,7 +37,8 @@ struct mii_phy_ops {
 struct mii_phy_def {
 	u32 phy_id;		/* Concatenated ID1 << 16 | ID2 */
 	u32 phy_id_mask;	/* Significant bits */
-	u32 features;		/* Ethtool SUPPORTED_* defines */
+	u32 features;		/* Ethtool SUPPORTED_* defines or 
+				   0 for autodetect */
 	int magic_aneg;		/* Autoneg does all speed test for us */
 	const char *name;
 	const struct mii_phy_ops *ops;
@@ -86,8 +47,11 @@ struct mii_phy_def {
 /* An instance of a PHY, partially borrowed from mii_if_info */
 struct mii_phy {
 	struct mii_phy_def *def;
-	int advertising;
-	int mii_id;
+	u32 advertising;	/* Ethtool ADVERTISED_* defines */
+	u32 features;		/* Copied from mii_phy_def.features 
+				   or determined automaticaly */
+	int address;		/* PHY address */
+	int mode;		/* PHY mode */
 
 	/* 1: autoneg enabled, 0: disabled */
 	int autoneg;
@@ -98,40 +62,19 @@ struct mii_phy {
 	int speed;
 	int duplex;
 	int pause;
-
-	/* PHY mode - if needed */
-	int mode;
+	int asym_pause;
 
 	/* Provided by host chip */
 	struct net_device *dev;
-	int (*mdio_read) (struct net_device * dev, int mii_id, int reg);
-	void (*mdio_write) (struct net_device * dev, int mii_id, int reg,
+	int (*mdio_read) (struct net_device * dev, int addr, int reg);
+	void (*mdio_write) (struct net_device * dev, int addr, int reg,
 			    int val);
 };
 
 /* Pass in a struct mii_phy with dev, mdio_read and mdio_write
  * filled, the remaining fields will be filled on return
  */
-extern int mii_phy_probe(struct mii_phy *phy, int mii_id);
-
-static inline int __phy_read(struct mii_phy *phy, int id, int reg)
-{
-	return phy->mdio_read(phy->dev, id, reg);
-}
-
-static inline void __phy_write(struct mii_phy *phy, int id, int reg, int val)
-{
-	phy->mdio_write(phy->dev, id, reg, val);
-}
-
-static inline int phy_read(struct mii_phy *phy, int reg)
-{
-	return phy->mdio_read(phy->dev, phy->mii_id, reg);
-}
-
-static inline void phy_write(struct mii_phy *phy, int reg, int val)
-{
-	phy->mdio_write(phy->dev, phy->mii_id, reg, val);
-}
+int mii_phy_probe(struct mii_phy *phy, int address);
+int mii_reset_phy(struct mii_phy *phy);
 
-#endif				/* _IBM_EMAC_PHY_H_ */
+#endif				/* _IBM_OCP_PHY_H_ */